Log into your Prepaway Account
Please Log In to download ETE file or view Training Course
Registration is free and easy - just provide your E-mail address.
Click Here to Register
Exam: | 100-105 - ICND Interconnecting Cisco Networking Devices Part 1 |
Size: | 3.45 MB |
Posted: | Wednesday, September 6, 2017 |
Download:
|
Cisco.Train4sure.100-105.v2017-09-06.by.reagan.124q.ete |
Download Free 100-105 Exam Questions |
Log in to make your opinion count.
Registration is free and easy - just provide your E-mail address.
Click Here to Register
Use Discount Code:
A confirmation link was sent to your e-mail.
Please check your mailbox for a message from [email protected] and follow the directions.
All questions from this paper.
The SIM are included on this paper as well.
Passed high 900's.
There is at least 1 Q in dump that is incorrect - concerning a destination port - the dump says it forwards out all ports, but the known destination port is in the address table. so the correct answer is Fa0/6 not 'all except'
Study, know your IP info.. learn the magic number formula's
I sat down,a nd during the 15 minute intro bit I created my magic number chart, and that got me through the majority of the exam, just knowing that stuff.. the dump didn't matter where that was concerned.
Summary - know your business, you won't have any issues.
Thanks all.
KG
with regards
Passed today with score of 919!
Study Susan and Snowden and you will succeed!
Also study the material!!!
Passed with 903.
Every question was verbatim/exact on the exam.
The only difference was the order the choices/answers were in.
email:[email protected]
I really need it Pls
THANKS FOR SUSAN , THANKS FOR EXAM COLLECTION
what you mean by 18/05 sims answers were different ??
Thanks in advanced
22/11/2017
A few wrong answers.
Thank you
(correct this question)Which two commands will display the current IP address and basic Layer 1 and 2 status of an
interface? (Choose two.)
A. router#show version
B. router#show ip interface
C. router#show protocols
D. router#show controllers
E. router#show running-config
Correct Answer: CD
thanks
THANKS SUSAN
Can anyone please confirm if dump is still valid?
THIS dump is still valid.
Study material , 9tut, CBTNUGGETS and dump. On to ICND2 now.
Good luck to everyone.
Thanks
focus on non-config sim (router&switch) which are connected to a console
no config simulation was there
I just took exam today 12/05/2017 from USA. 100% valid all question from Susan dump. I got one drag and drop and both sim all are from dump. Good luck!!!!!!!
i must do the exam on 01/12/2017 in Argentina. Which practice examn do you recomend to study? SUSAN? DUMP? thankss!!!
from Nepal
passed, 2 simulation, show commands, no configuration
Thank you very much in advance
https://learningnetwork.cisco.com/community/ccna-rs-certification
https://learningcontent.cisco.com/cln_storage/text/cln/marketing/ccna-rs-exam-revision-v6.pdf
Passed thanks.
Thanks a lot!!!
Could you help me with where to find the free ETE Exam simulator please?
Any help would be highly appreciated.
Thanks,
Siva
All the questions are the same. The sims are the same too, but with different values. You need to know the show commands to answer the sims.
I did go thru Susan, Snowden and 9tut's dumps.
As for real studying.. Lammle’s book, CBT Nuggets and Packet Tracer is all you need to understand the material. Good luck.
[email protected]
I need This Exam my E-mail [email protected]
dump is still valid. You really need to dominate CIDR, lots of questions about it in my exam. Oh, and sims with show commands to troubleshoot.
Score 920
A couple of new questions in the exam not included in dump.
Don't just rely on dump, make sure you watch the CBT Nuggets ICND1 videos, understand OSPF and the router show commands.
next monday i passed the exam
please send me the dump PDF to my Email.
[email protected]
thanks
[email protected]
thanks
[email protected]
I studying.. Lammle’s book, CBT Nuggets and Packet Tracer, Bilge Adam, is all you need to understand the material.
Good luck to you guys.
I really appreciate it. [email protected]
100-105 - Interconnecting Cisco Networking Devices Part 1 (ICND1)
100-102 - Interconnecting Cisco Networking Devices Part 2 (ICND2)
[email protected]
100-105 - Interconnecting Cisco Networking Devices Part 1 (ICND1)
100-102 - Interconnecting Cisco Networking Devices Part 2 (ICND2)
[email protected]
[email protected]
thanks
[email protected]
[email protected]
100-105 - Interconnecting Cisco Networking Devices Part 1 (ICND1)
100-102 - Interconnecting Cisco Networking Devices Part 2 (ICND2)
[email protected]
a lot of subnetting, no IPV6, study the OSPF neighbor SIM with 6 routets on 9tut
Can I be emailed dumps in pdf ?
[email protected]
i will take icnd1 exam next week, could someone send me the dumps in pdf please?
This is my email: [email protected]
Email: [email protected]
Best regards
Thanks!
ICND 1 and ICND 2
if you have it
Question 20
How does TCP differ from UDP? (Choose two.)
A. TCP provides best effort delivery.
B. TCP provides synchronized communication.
C. TCP segments are essentially datagrams.
D. TCP provides sequence numbering of packets.
E. TCP uses broadcast delivery.
Correct Answer by dump: “BD” yes true but answer “A” is also a valid answer
Question 24
SwitchA# show mac-address-table
-----------------------------------------------------------------------------------
Destination Address | Address Type | VLAN | Destination Port
00b0.d056.fe4d | Dynamic | 1 | FasEthernet 0/3
00b0.d043.ac2e | Dynamic | 1 | FasEthernet 0/4
00b0.d0fe.ac32 | Dynamic | 1 | FasEthernet 0/5
00b0.d0da.cb56 | Dynamic | 1 | FasEthernet 0/6
Frame received by SwitchA:
Source MAC | Destination Add | Source IP | Destination IP
00b0.d056.fe4d |00b0.d0da.cb56 | 192.168.40.5 | 192.168.40.6
Correction Answer: is “B” not “D (correct answer by dump)” it will forward the frame in fa 0/6 only because source and destination mac address is already in mac address table, not flood it to all ports except to fa 0/3.
Question 33
Which two characteristics describe the access layer of the hierarchical network design model? (Choose two.)
A. Layer 3 support
B. Port security
C. Redundant components
D. VLANs
E. PoE
Correct answer by dump “A B” for me is “B D” because in NETACAD explanation about this hierarchical network design model: *Access Layer
> The access layer represents the network edge, where traffic enters or exits the campus network
> the next-generation switching platforms now provide more converged, integrated, and intelligent services to various types of endpoints at the network edge
* Distribution Layer
> The distribution layer interfaces between the access layer and the core layer to provide many important functions, including:
> Aggregating large-scale wiring closet networks.
> Aggregating layer 2 broadcast domains and layer 3 routing boundaries.
> Providing intelligent switching, routing, and network access policy functions to access the rest of the network.
> Providing high availability to redundant distribution layer switches to the end-user and equal cost paths to the core
* Core Layer
> The core layer is the network backbone. It connects several layers of the campus network
> The primary purpose of the core layer is to provide fault isolation and high-speed backbone connectivity.
i have an exam in two days
[email protected]
Done in Rome.
Thanks in advance.
Cathbert
for OSPF. Make sure you know "show ip ospf interface"
The dump is reliable...
But work on you ospf the sim is little big hard.
But his god I got it
[email protected]
i have exam after one week. please. thx
are you mean the question ??
i have the questions if somebody need them
It is still valid passed with 947 today in Pakistan 1 new Question and 2 was different rest was from dumps.
Thank You
[email protected]
Many Thanks
thanks
so you don't have to Email one by one.
Got 1000 of 1000 today. Found a few mistakes but you can pass anyway.
[email protected]
Thanks!
SIM from 9tut.net
100-105 - Interconnecting Cisco Networking Devices Part 1 (ICND1)
100-102 - Interconnecting Cisco Networking Devices Part 2 (ICND2)
to [email protected]
Can you tell me what the OSPF IPV6 Lab, i don't find this lab
help me please
I recommend study with dump and 9tut.net
There was a lot of question about OSPF but nothing about IPv6. There was one new question.
Thanks in advance.
I am all prepared to take the exam so just wanted to test my self. Much appreciated. Thanks.
100-105 - Interconnecting Cisco Networking Devices Part 1 (ICND1)
I really appreciate it. [email protected]
[email protected]
Thanks
i would be very helpfull. thx
Good Luck guys
http://www.9tut.net/icnd1/icnd1-security-testlet
and the OSPF and Show commands SIM from 9tut http://www.9tut.net/category/icnd1/labsim
it is batter to email one by one.
Can you tell me what OSPF IPV6 Lab please
please help me
thanks
sooner, i will take the ICND1 exam. Need some help: anyone send me the dump in pdf pls
Thanks a lot
I have pdfs available
[email protected]
1. OSPF Neighbor Sim
2. Show Configuration Sim
3. Security Testlet
In the security testlet sim, I checked " unsecured message on banner" as a security issue for both the router and switch. Therefore, please note this is the correct answer.
Had one OSPF IPV6 Lab and another Config in the Security Lab.
Valid
taking the exam next week, i have gone through the book and cbt nuggets!
could someone send me some pdf dump please?
ps i already have the one from 9tut for july.
Thanks @lot
Can someone send me the valid dump.Thanks in advance!!!!
[email protected]
[email protected] , [email protected] , [email protected] , [email protected] , [email protected] , [email protected] , [email protected] , [email protected] ,
Is he dump still valid in USA
Please thank you
[email protected]
Any last minute tips? :) Much appreciated !!
Did people get many sims? If so, were they the same ones as on the dump file?
LEARN HOW TO SUBNET!
[email protected]
to [email protected]
Wondering if dump is still vaild in UK ?
Thanks
[email protected]
Thanks for the dump, now getting ready for ICND2.
Cheeky question in there to do with the benefits of having ospf that caught me off guard!
how to put all interfaces in OSPF are 0
Choices as I remember :
A- Router1# network 255.255.255.255 0.0.0.0 area 0
B- Router1# network 0.0.0.0 255.255.255.255 area 0
C- Router1# all-interfaces area 0
D- Router1# network 0.0.0.0 0.0.0.0 area 0
I choose D but don't know if it's right
Somebody know how i can training to the lab required in the icnd1 ? I don't know what they are going ask, i have work a lot the questions but don"t know what is needeed in practice.
Thank you !
I missed one question (on purpose)
Valid dump!!!
Don't forget to have a look on 9tuts Simulations
Sims: OSPF TSHOOT and Switch/Router Security (Exactly the same with the 9tuts)
Used the following study materials to prepare :
CBTNuggets
Udemy - Chris Bryant
Cisco Press Official Cert Guide Library
Cisco Learning Network
Do not rely solely on dumps, as you will not understand the theory behind it and may fail on simulation questions.
Sims : Security, OSPF, Show Config
- No new questions noticed
This Dump is 99.92% valid.
Please study OSPF sim from 9tut.
There is new question about ospf configuring to all ports.
Thanks
passed today.
-subnetting
-security
-OSPF+
Also anyone knows if this .ete is valid in Australia ?
Cheers
all are question in this dums.but only 1 or 2 are different...
Just curious if you all thought that a home lab was necessary. I gonna get the books, but do I need a lab?
110/10/2017
OSPF Neighbor Sim
and http://www.9tut.com/ospf-neighbor-sim
show runn was disabled on some labs, tabs and ctrl A were blocked. Practice from packet tracer helped. Thanks Susan
Labs for ICND-1 are
*Show Configuration Sim
*Security Testlet
*OSPF Neighbor Sim
Are these labs are included in dump file ?
waiting positive response.
Studied dump, along with CODY's and used 9tut.net.
Had 50 questions; Some were new but if you know your stuff and studied well, you'll be able to answer them.
Sims: OSPF TSHOOT and Switch/Router Security.
Recommended : Cody & Susan Dump Files
thanks
I am currently studying for the ICND1 can someone please send the pdf file of the dumps to me please. my email is [email protected]
Which two characteristics describe the access layer of the hierarchical network design model?
(Choose two.)
A. layer 3 support
B. port security
C. redundant components
D. VLANs
E. PoE
Answer that is in test bank: A,B
Real Answer: B,D
Explanation: http://www.ciscopath.com/content/61/
http://www.mcmcse.com/cisco/guides/hierarchical_model.shtml
Access layer
The main purpose of the access layer is to provide direct connection to devices on the network
and controlling which devices are allowed to communicate over it. The access layer interfaces with
end devices, such as PCs, printers, and IP phones, to provide access to the rest of the network.
The access layer can include routers, switches, bridges, hubs, and wireless access points (AP).
Switch features in the Access layer:
Security question and the sim with the 6 routers connecting from r3 to 45 and such were all that really slowed me down.
Test still valid
Questions are valid in dump, only two questions out it. OSFP lab from 9tut.
Thanx Susan keep up the good dumps
[email protected]
Thanks Susan
This Dump is very valid (Y)
There was 3 simulation Questions each of them consist of 4 questions :
1) Show Configuration Sim
2) Security Testlet
3) OSPF Neighbor Sim
Enjoy ;)
https://drive.google.com/file/d/0By5zWJL4h__TZ2xVQTFCUS1RNTQ/edit?usp=sharing
Topology Image : http://i58.tinypic.com/10f1hyf.png
Can someone who has passed please be kind enough to reply??
also had a really hard ospf troubleshooting scenario.
the full breakdown for /26 (increment of 64)
.0 (.1-.62) .63
.0 is the network address
.63 is the broadcast address
.1-.62 are the host usable addresses
50 Questions
4 new Questions
46 Questions from dump and Ulysses dump
there was 2 lab in the exam, but it is in the dump
I also learned from Nada.137Q
Should the range only be 192.168.4.1 - 192.168.4.62 ?
Co grats on all who have passed and all who will pass!
-OSPF Neighbor Sim
-Show Configuration Sim
-Security Testlet Sim
100% questions in the exam were of dump!!!
Just passed ICND1 90% of the questions word for word from this dum Even the simlet questions so make sure you practice those too.No configuration question.There was a simlet for OSPF (5 questions)where u need to look at router configs to see where routers arnt talking to each other mainly was router ID and Area discrepencies so learn OSPF well.
there was 3 lab in exam
*Show Configuration Sim
*Security Testlet
*OSPF Neighbor Sim
Well finally passed a Cisco exam,, I never set for a Cisco exam before but it was the year 2008 when i bought CCNA training DVD to study. Anyhow now that I kicked off my 1st Cisco exam it gonna be a big motivation till my CCIE!
Back to my today's exam 100% of exam Qs from CODY,KHATRINA & SUSAN except 1 new Q for me.
I got 3 sims, 1 simple network wit h RW+SW & couple PCs, 1 OSPF sim & 1 sim that I totally forgot what was it lool. And also got about 3 drag and drop.
My advice:
1- study SUSAN+CODY+Khatrina dumps
2- Master subnetting!!
3- Practice T-shooting commands especially OSPF.
My Cisco journey has just started!!! ;-)
Good luck for all ..
This dump still valid but you need check the Sims. Thank you Susan.
3 sims
With dump sure you will pass.
Best of Luck :)
GL all
Still valid dump. Don't forget visit 9tut. Thanks Susan
Switch a receives the frame with the addressing shown according to the command output also shown in the output. How will switch A handle this frame? The answer says it will flood the frame out all ports except the one that it (the frame) is sent out on...however, in the example given, the destination MAC address is listed in the MAC address table. Please clarify
Why exactly is the answer not B. The mac is still in the table so would it not send it out fastethernet0/6?
Do you know if dump still valid in France ?
I saw any messag from french user
Thank you !
Please thank you
A. Router#show version
B. Router#show ip interface
C. router#show protocols
D. router#show controllers
E. Router#show running-config
Correct BC, NOT CD
This exam is the best
only one question out it was OSPF lab I did my best on it
Thanks again for your support and keep it like that.
God bless y all
TIA
Still valid dump. Don't forget visit 9tut.
nice
And yep this dumb still vaild 100%
the output in the image is missing one thing, V.35 cable line missing "DCE" afre V.35.
The correct command out put is:
R1#show controller serial 1
HD unit 1, idb = 0x1DBFEC, driver structure at 0x1E35D0
buffer size 1524 HD unit 1, V.35 DTE cable
or if DCE is connected
R3#show controller serial 1
HD unit 1, idb = 0x1C44E8, driver structure at 0x1CBAC8
buffer size 1524 HD unit 1, V.35 DCE cable
also review 9tut
everything available between the two
practice subnetting
ospf neighbor sim
security teslet sim
show config sim
Thanks
I download dumps , but it only have five Questions.
Passed the exam this morning. Had only 50 questions.
Susan File is Legit.. all questions from it, perhaps 1 new question.
Answers are in different order from Susan file.
1. OSPF Neighbor Sim (Router issues are not in same order)
2. Show Configuration Sim
3. Security Testlet
Same questions as dump + 3 simlets found on 9tut.net
Thank you so much Prepaway. Now I'm a CCENT !
In Dumps the questions are properly arranged but in real exam, will they be like in Mixed form ? like the Choices A,B,C,D be mix ? or same to same Choices ?
-OSPF Neighbor Sim
-Show Configuration Sim
-Security Testlet Sim
Studied from dump, as well as, CRISTIANO.102q and SPIKE.119q. Remember to check out the sims on 9tut.net.
the sim had ospf, and simple sims
There are a few questions in here that I know are incorrect, just make sure you know the majority of the questions. (See Wikkity's comment)
KNOW YOUR OSPF. KNOW HOW TO SUBNET IN YOUR SLEEP.
MANY THANKS
PASSSSSSSED
Questions are valid in dump. Also see 9tut for ospf dump, u will get that one too.
-> Show Configuration Sim
-> Security Testlet
-> OSPF Neighbor Sim (it took me more time than I expected).
Thanks
*Try going through Adam and Nada as well
*Plus 9 tut
*OSPF commands
Which two characteristics describe the access layer of the hierarchical network design model? (Choose two)
A. layer 3 support
B. port security
C. redundant components
D. VLANs
E. PoE
good work
thank for site