Log into your Prepaway Account
Please Log In to download ETE file or view Training Course
Registration is free and easy - just provide your E-mail address.
Click Here to Register
Exam: | 300-070 - Implementing Cisco IP Telephony and Video, Part 1 (CIPTV1) |
Size: | 1.62 MB |
Posted: | Saturday, September 16, 2017 |
Download:
|
|
Log in to make your opinion count.
Registration is free and easy - just provide your E-mail address.
Click Here to Register
Use Discount Code:
A confirmation link was sent to your e-mail.
Please check your mailbox for a message from [email protected] and follow the directions.
Congratulations, can you share corrections in answers?
1- You need to delete an auto-registration Cisco Unified Communications Manager group for a cluster. What should you do?
A. Remove the Cisco Unified CallManager group devices
B. Disable auto-registration settings in the Cisco unified CallManager group
C. Assign a different call group as the auto-registration Cisco Unified Call Manager group.
D.Delete a the auto-registration Cisco Unified CallManager group with performing any action.
Answer in Prepaway file: C
Answer for me needs to be: B
2-What is the correct order for configuring call routing in Cisco Unified Communications Manager?
A. gateway and SIP trunk, route group, route pattern, route list
B. gateway and SIP trunk, route list, route group, route pattern
C. gateway and SIP trunk, route group, route list, route pattern
D. route list, gateway and SIP trunk, route group, route pattern
Answer in Prepaway: A
Answer for me needs to be: C
3-A customer recently installed a Cisco Telepresence MCU 5320. The customer wants a virtual meeting room that restricts participants
from communicating before the customer joins the call. Which feature in the MCU enables this functionality?
A. numeric ID
B. floor and Chair control
C. Owner
D. PIN codes
Answer in Prepaway File: D
Answer for me needs to be : Floor and Chair Control
4-Which two types of encoding are available to configure a T1 controller for CAS?
A. B8SF
B. AMI
C. B8ZS
D. SF
E. AME
F. ESF
Answer in Exam COllection File: C, F
Answer for me needs to be: BC
5- Which two of these describe where phone services can appear on an IP phone and who can subscribe to phone services? (Choose two)
A. End User
B. Administrator
C. End User and Administrator
D. Services Button
E. Services and Directories Buttons
F. Services, Directories and message buttons
Answer in Prepaway FIle: C,F
Answer for me needs to be: A,D
6- What are the characteristics of a Cisco Unified Communications Manager group?
A. Each call-processing server can be assigned to a single CUCM group.
B. A CUCM group is a prioritized list of (one or more) call processing and application servers.
C>Each device has to have a CUCM group assigned, which will determine the primary and backup
servers to which it can register.
D. A single CUCM group can exist in a single cluster.
Answer in Prepaway File: B
Answer for me needs to be: C
7-Which two components must an engineer configure before configuring SIP route Pattern? (Choose two)
A. Route Filter
B. SIP trunk
C. Route Partition
D. Calling Search Space
E. SIP Profile
Answer in Prepaway Profile: BE
Answer for me needs to be: Dont Know
8-Which three options can belong to specific partitions? (Choose Three)
A. Voice Mail Servers
B. Directory numbers
c. translation Patterns
D. gateways
E. IP Phones
F. Route patterns
Answer in Exam COllection File: A, D
Answer for me needs to be: A,B, D
9- Which two options can a route pattern be assigned?
A. a gateway that is not assgnied to a route group
B. a gateway that is assigned to a route group
C. a route list with no route groups configured
D. a route list with one or more route groups configured
Answer in Prepaway File: B,D
Answer for me needs to be: A,D
10- What is the default option for framing when you configure a T1 controller?
A. Super Frame
B. Alternate mark inversion
C> Extended Super Frame
D. Cyclic redundancy check 4
E. high density bipolar 3
F. No. CRC4
G. Binary 8-zero substitution
H. Australia
Answer in Prepaway FIle: A,F
Answer for me needs to be: A,C
GOOD LUCK
Thank you.
Congratulations, Please share your corrections in the answers.
dump file 129Q is valid and all wrong Q&A's are correct in new file.
But got 2 new questions and i dont remember exact questions and ans but someone already mentioned it.
After adding a new pattern, calls to that pattern are taking about 15 seconds before you hear PSTN dial tone. What could be the issue ?
1- You need to add the new pattern to VGW
2- The new pattern overlaps with an Existing Pattern << My answer
3- This is normal PSTN bahavior
2Q I dont remember.
dump 129Q is still valid?
Can we expect new file in coming days?
129Q is still valid?
Thanks
could you please add the correct answear ,is the 129Q still valid
A. 65XX
B. 60XX
C. 6[05]XX
D. 6XXX
E. 6[0-5]
Ans .......?
Is the file valid or there will be a new update soon so i can buy it?
Please reply to me asap and thank you
I used Actualtests, but i think, it was same one.
Could you share answers you corrected please ?
Did Any one pass this exam .
Could you please share Questions you have corrected ?
i will try after few days
dump File was updated 30/06/16
129q
Is all questions was from the file ? what about the answers, are they all correct in the file ?
The true in the comments below
Q.150
An organization has built their video infrastructure to perform ad hoc video calls, but they also need to conduct managed video conference calls.
Which hardware component is needed to conduct these calls?
A. VCS-E
B. IOS gateway
C. MCU
D. TelePresence server
dump answer is A.VCS-E
my answer is C.MCU
can any one verify the answer ?
dump was updated.
C. dial-peer voice 1 pots
incoming called-number .
direct-inward-dial
Nour Azmy
EgyptNov 23, 2017Report:
Report was submitted. Thank you.
Pass today 931, one new easy question , 65Q with 2 Simulets (4Q each Multiple choice) so total = 71Q
My corrections are:
39 QOS Video: ADE. http://www.cisco.com/image/gif/paws/21662/video-qos.pdf
40 auto registration. B
70 Conference management: E. http://www.ivci.com/product/cisco-telepresence-conductor/
76 Video conference conduct: D
82 CMG: C. http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/4_1_3/ccmcfg/b02cmgrp.html
86 block route pattern: E
88 Encoding T1: BC. http://docwiki.cisco.com/wiki/Cisco_IOS_Voice_Troubleshooting_and_Monitoring_--_T1_or_E1_Interface_Troubleshooting
89 Route pattern: AD. http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/7_1_2/ccmcfg/bccm-712-cm/b03rtpat.html
90 Second tone: D. https://supportforums.cisco.com/document/16911/how-stop-cisco-ios-gateway-sending-second-dial-tone-call-through-isdn-pri
92 Partitions: BCF. http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-communications-manager-callmanager/22325-part-css-tn.html
95 ISDN STATUS: DE. http://www.cisco.com/c/en/us/support/docs/dial-access/integrated-services-digital-networks-isdn-channel-associated-signaling-cas/5705-bri-sh-isdn-stat.html
99 meet me: DE
100 default framing T1: C. http://www.cisco.com/c/en/us/td/docs/wireless/asr_900/software/guide/chassis/ASR903-Chassis-SW/T1-E1_Ifc_Module.html
101 Patron: D
104 Call back: AC
108 Dial Peer: C
110 QOS model: D. https://books.google.es/books?id=eLa5crPXSOYC&pg=PA584&lpg=PA584&dq=qos+high+resolution+intserv&source=bl&ots=KfyxxlVChC&sig=GULAyZ8_pHyAc0sOZPj2LhR6i_k&hl=es&sa=X&ved=0ahUKEwia__664NrNAhVFuhoKHXsVDBYQ6AEIHDAA#v=onepage&q=high%20resolution&f=false
111 Call routing configuration order: A
114 Site codes: A
115 Phone service: DE
116 Orden: C
118 Time schedule: BCE
120 CSS: BCD.
121 Diffserv: B
122 DNA: DEF. http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/dna/8_6_1/dnaguide/dnaan.html#wp1227993
123 Route pattern dial: C
129 SIP IP trusted: CE
3. D (Pin Codes)
7. BE (SIP Trunk, SIP Profile)
8. B, C, F (Directory Number, Trenaslation Pattern, Route Pattern)
Please share with us your questions??
1 new Question (Not exact same words):
After adding a new pattern, calls to that pattern are taking about 15 seconds before you hear PSTN dial tone. What could be the issue ?
1- You need to add the new pattern to VGW
2- The new pattern overlaps with an Existing Pattern << My answer
3- This is normal PSTN bahavior
I can't remeber the last choice. Good Luck Guys
Number: right answers
89: A+D
90: D
92: B, C, F
95: D, E
108: C
114: A
115: D, E
116: C
120: B,C, D
123: C
study the last 65Q most from the dump
The file contains new answers (14/06/16).
Which answers are wrong ? Thanks !
A. Cisco IOS Router with PVDM
B>. Cisco TelePresence Conductor
C. Cisco TelePresence Server
D. Cisco TelePresence MCU
E. Cisco TelePresence MSE 8000
Answer in Prepaway file: E
Answer for me needs to be: B
2.-Which statement about the DiffServ QoS deployment architecture is true?
A. DiffServ architecture differentiates and classifies various types of traffic and provides several levels of service based on that classification.
B. DiffServ architecture provides QoS by assuring treatment for a specific traffic flow.
C. DiffServ does not differentiate traffic type and thus cannot provide service levels.
D. Resource Reservation Protocol is a example of a DiffServ mechanism where each router on the path for packet transmission is informed of the upcoming packet stream.
Answer in Prepaway file: D (RSVP is a example for IntServ but not for DiffServ, DSCP is a example por DiffServ)
Answer for me needs to be: A
i'm using 129Q PREMUIM/EDITANSWERBYME/TRANSLATEPREVIOUSMESSAGEBRO
@Mohammed, please share with us your questions.
Q39; OK same answers as you
Q88; OK same answers as you
Q92;
directory numbers
TRANSLATION PATTERN
route patterns
Q100;
extended super frame
SUPER FRAME
Q120; OK same answers as you
Q122;
TRUNK, PHONE, GATEWAY
I'm not sure about my answers... I need to double check them!!!
@Sky... Thanks for sharing them ! I'm gonna check those too on docs :)
You need to update your ETE Player to current version. Version 1.1.2 is very old.
Answers are a disaster, around 20 are wrong.
What kind of ETE player do you use?
A ip of cucm and cme ip address trusted list
B allow-connections sip to sip
I was confused because I thought A & B are both right??
488 has something to do with codec negotiation i think
129Q is sill valid ?
An engineer configures a router with an ISDN PRI connection that only contains two dial peers as follows:
dial-peer voice 10 pots
destination-pattern 9T
port 0/0/0:23
dial-peer voice 100 voip
destination-pattern 45..
session target ipv4:10.2.10.1
When an inbound call is placed from the PSTN to extension 4510, a dial tone is heard. Which additional dial peer is needed to allow the call to terminate directly to the
internal number?
A. dial-peer voice 1 pots
answer-address .
direct-inward-dial
B. dial-peer voice 1 pots
destination-pattern 45..
direct-inward-dial
C. dial-peer voice 1 pots
incoming called-number .
direct-inward-dial
D. dial-peer voice 1 pots
destination-pattern 45..
port 0/0/0:23
direct-inward-dial
dump files still 131 Same questions
updated verson apr.06th how many questions???u see different questions.
Thanks
WebRTC in Firefox:
The currently supported voice codecs are G.711, G.722, iLBC, and iSAC, and VP8 is the supported video codec.
Link: https://webrtc.org/faq/
let me know if they are not
Q39;
high packet rate
variable packet rate
high MTU
Q88;
AMI
B8ZS
Q92;
directory numbers
gateways
route patterns
Q100;
extended super frame
binary 8-zero substituiton
Q120;
gateways
phones
phones lines
Q122
I dont know
answer-address 408555....
destination-pattern 91[2-9]..[2-9].....
forward-digits all
direct-inward-dial
can any one verify the answer ?
is dumps valid or not
i will write this exam on next Monday
All other are new.
Thank you in advance..
another way, just study the dump and you will find 70/71 Questions in the Exam.
Installing virtual Conductor, which disk format:
A Thick Provision Lazy Zeroed
B Thick Provision Eager Zeroed
C Thin provision
A is correct
WebRTC in Firefox, can't remember exact question but the answers are:
A H.264
B H.265
C G711
D WMV
and some more
Scenario: Ip Phone - CUCM - CUBE - CME - Ip Phone . Sip-To-SIp call failed with 488 Not Acceptable Here, how to solve it?
A ip of cucm and cme ip address trusted list
B allow-connections sip to sip
I was confused because I thought A & B are both right??
output of show isdn status on ISDN PRI. Someq uestions like number of active calls, is D channel Up
Phone with DN 123 , in dial peer there was a pattern like 96523....
Question was: Call failed because forward digit command is missing but how many digits should be forwarded?
Incoming call hit dial peer but which command is missing to make it successful to cucm. Can't remember all answers, but one of them was with Direct Inward Dial. Not sure if this is correct
A lot of Qos questions
Difference between Shaping and Policing. Question was different than in the dump file
it is mentioned that it contains 71q but it actually contains 131q. and i am asking that is it valid or not?
Regards
Really appreciate it.
60 % valid dump !around 9- 10 new questions from SIP/QoS/Voice Gateways !
Good Luck every one !
While troubleshooting, the engineer discovers that the Cisco Unified Border Element is giving the error “SIP/2.0 403 Forbidden”. Which two Cisco Unified Border Element
configurations resolve this issue? (Choose two.)
unfortunately I didn't pass because on that day only 71 questions was available in ete.
[email protected]
failed today 820/1000
so probably it should be Valid now
valid
The prepaway file is 71, isn't 131 , please share the vaid questions
thanks
Can you please send me the pdf for this exam to [email protected]
Thanks,
Thanks
Online about 10% of questions are valid
Is the dump is still valid ?
Please update. I'm planning to sit for this exam next week. any input would be appreciated.
Thanks
Is the dump is still valid ?
Please confirm which dumps are Valid
Cleared the 300-070. See below
Time Duration : 105 Minutes
Questions : 60 however there were form of multiple question under one question so total you can say around 76 questions.
Most of the questions were same as present in Pass Leader however few (Around5-7) are newer one as below :
SIP : On Gateway which command would you fire to have different Payloads …
QoS : At which section of Ethernet Frame the CoS value been assigned …options were FCS , PID something like that…
Few more questions I will post as I remember
The sequence of options will be changed not like dumps.
Even I entered same answers as dum had but inner feeling said few answers given in dump are wrong. Like what would you assign to route pattern like that ..
Anyway Good Luck for exam…anyone require the dumps can contact me on [email protected]
please i need to take this exam soon.
5 new question
Today passed 300-070. still valid dump. there are very few questions.
please confirm the dump status
Thank you!!
Please send me 300-070 exam dump PDF veriosn to [email protected]
Thanks in advance
Passed 3-12
7Q new
[email protected]
are these questions valid?
please share the updated question. I have exam on next week.
thanks
Please send me 300-070 exam dump PDF veriosn to [email protected]
Thanks in advance
[email protected]
[email protected]@gmail.com
Thank you
Thanks Mr.Hussien
For any help send to me:
[email protected]
Please send me 300-070 valid exam dump PDF version to [email protected]
Thanks in advance
[email protected]
[email protected]
Would appreciate if i get dump for thid exam. I am having issues downloading from my Actual test account. They blocked me for a month. [email protected]
[email protected]
I passed with 91X / 1000 on 4-Nov
[email protected]
i am planing to take the exam next week
please comment
Please send me 300-070 exam dump PDF veriosn to [email protected]
Thanks in advance
[email protected]
four or five question are answered incorrectly to find the correct answer read CIPTV1 study guide
[email protected]
Passed today 901/1000