Log into your Prepaway Account
Please Log In to download ETE file or view Training Course
Registration is free and easy - just provide your E-mail address.
Click Here to Register
Exam: | 300-160 - Designing Cisco Data Center Infrastructure |
Size: | 946.04 KB |
Posted: | Sunday, September 24, 2017 |
Download:
|
|
Log in to make your opinion count.
Registration is free and easy - just provide your E-mail address.
Click Here to Register
Use Discount Code:
A confirmation link was sent to your e-mail.
Please check your mailbox for a message from [email protected] and follow the directions.
197 and 203 Q&A are valid
177q would be the right I feel
203Q is good, but has wrong answer.
Take time to think and look on the internet the answer.
203q is still valid.
There are 15 or so questions in the 203q dump that are incorrect. I went through and researched every answer and still managed to get a few wrong.
Wish if any one have a valid recent dump.
thank you in advance and good luck to every one :)
Did any one has cleared the exam recent? kindly advise.
And why I can see you are commenting to different Exam = you afre talkning about 203Q and this exam is 80Q only
Any body pass the exam 300-160 after Silver097 ? is the dumps 2o3 is till valid ?Please update me.I will sit the exam in next week .
could you please share where can I find Q&A197 or Q&A193?
Wich Cisco products meets the LAN extension crytpgraphy requeriments on OTV over Dark Fiber Scenario
A Zone based firewall
B VSG
C Cisco TrustSec
D IronPort
Which two business requeriments are factor in choosing to use Cisco Unified Fabric
A Maximized energi efficency
B Increment network componet security
C Long-term cost saving
D Short-term capital expenditure saving
E Reduce license cost for virtual server
You plan to implement a new Nexus 7K Series swith that will have N7K-F132XP-15 F1 modules. How many fabrics modules do you need to achive the full F1 module capasity?
A 10
B 3
C 5
D 2
which two opcion are benefits credit-based flow control in a fibre channel network (choose 2)
A Max performance under high loads
B send credits to all switches in a SAN zone
C increse de credit limit when the buffer overruns
D prevent the loss of frame due to buffer overruns
E provides automatic buffer scaling under high loads
Which two technologies can be used to minimise routing to the DC core layer from being compromised (choose 2)
A Route Sumarization
B Route Redistribution
C Route filtering
D Route peer authentication
E Policy Base Routing
Refer to the exhibit. You are evaluating a proposed topology design.
Which tecnology can you recommend to lower the total cost of the hardware for the topology
A VSAN
B Private Vlans
D Vlan trunking
D Port Channel
You are buld tier 1 data center with less redundant componet. Which series of devices must you use for a Top of the rack SOlution
A Nexus 7000
B Nexus 5500
C Nexus 2000
D Nexus 5000
Which two platform are suported by using the Cisco Data Center Net Manager
A Cisco Aironet
b MDS Switches
c Cisco ACE
d Cisco Catalyst
e Cisco Nexus
Which protocol can you use to automate the process of provisining new devices in data center
a LACP
b PAGP
c LDP
d LISP
e POAP
Which three option feature of the Cisco Prime DCNM
a https conection devices
b Security and objets views
c authentication services
d san inventory
e inventory and performance views
f device groups and .....
which two funcionalities are provides dor each contect by using context mode on a Cisco Asa Firewall
A Separate SSL VPN configuration
b Separate security policies
c separate administration
d Differente routing protocols
Which two cisco unified fabric aggregation layer devices can run a full fibre channel forwarder
a Catalyst 6500
b nexus 5500
c nexus 7000
d mds 9000
e nexus 3000
which two description of the configuration are true
a the device is a primary vpc device
b the device is a secondary vpc device
c the device is configured to act an active gateway fo packets destined for MAC address of the peer devices
d there are 55 vpc domains configured on the devices
e the stp is derirable on the vpc peer device
Please send it to me [email protected]
300-160 dump ETE File
300-160.ete - Prepaway Verified - Instant Download
177 Questions
Really... You pass with 126 QA
Regards
Glad to see people pass
Prepared almost 3 weeks
Thanks God, finally passed.
two new questions i got in my test, still not sure about the answers, wish someone can help me solve:)
QUESTION 145
Which Cisco product meets the LAN extension cryptography requirement in OTV over Dark Fiber scenario?
A. Zone based firewall
B. VSG
C. Cisco TrustSec
D. IronPort
Answer: C
QUESTION 146
Which two business requirements are factors in choosing to use Cisco Unified Fabric (Choose 2)
A. Maximized energy efficiency
B. Increased network component security
C. Long-term cost savings
D. Short-term capital expenditure savings
E. Reduced license costs for virtual servers
Answer: AC
Other quiestios is I remeber is:
What features does the firewall in transparent mode (select 2)
What are the requirements for designing application in a data center ( Select 3)
What are the requirements for designing a storage ( Select 3)
The oversubscripcion.
Kelvin. Whats material are you based to pass this exam. Please Help me.
Someone helps to resolve this question?
OTV is the correct answer?
You plan to extend a single site data center to a dual data site solution that will use an ip based layer 3 interconect using cisco nexus switches. The solution must support virtual machine migration between the two sites. whisch protocol must you use
a mpls l3vpn
b bgp
c vpls
d otv
Regards.
1. Catalyst with VSS and Firewall?
A. needs dynmaic Routing
B. Independent to manage
2. Which licenses is needed to run OTV?
3. What is a Nexus feature?
A. VSL
B. CFS
4. A. Keeps HTTPS connection to devices
5. What is a feature of the Transparent Firewall
6. Class 3 FC
7. On which Data Center layer occurs IGMP Snooping
8. How Many Fabric Module do you need if you have a N7K with full F1-xxx-xxx Modules
Thnaks for your new 300-160 exam questions, I passed the exam yesterday with that full version 300-160 dumps!
Thanks a lot!
You have an event in DCNM. To which two valid statuses can change the event.
a Assigned
A Acknoledge
c in Progress
d Pending
e Resolved
f Closed
which description of running in Cisco Prime DCNM as a true a virtual machine is true.
a The Mac address can be change after de Cisco Prime DCNM is installed on the virtual machine
b the cpu and memory must be reserved for the virtual machine
c the virtual machine is shared between with other services
d the virtual machine must run a hyper-v host
whic three description of vdc are true
a you can perform an ISSU on a per vdc basis to separete the fault domain
b you can secure the network partition between different tenats on the same physical switch
c the cisco nexus 7k series platform allows you to buld up to 10 vdc in a single node
d the management uo address of each vdc must be on differente subnet
e you can consolidate the siwtch platform of multiple departments onto a single physical platform
f you can provide departments with the ability to administer and maintain ther own networks nodes
you are designing a large scale, multiple data center. Which two feature provides each tenant with the ability to manage its own ip services at the aggregation layer
a cisco asa vrf tabled
b cisco nexus 7k series rbac role based access control
c cisco asa security context
d cisco nexus 7k series vdc
e cisco nexus 7k series otv
what action occurs before an n port can begin exchanging data with other n port
a n port log in to its attached f port
b n port log in to its target f port
c f port log in to its target n port
d f port log in to its attached n port
e n port log in to its target n port
the 24bits fibre channel address consists of wich three elements
a switch id
b domain id
c as number
d area id
e port id
which three items represent feature of vmfex with cisco nexus 1000v
A.Software packet switching (this is correct)
B.Hardware packet switching
C.802.1Q D.VN-Tag (802.1Qbh) (this is correct)
E.Feature rich (this is correct)
F.Higher perfomance
What software, hardware, and licenses are required in a Nexus 7000 OTV deployment?
Answer: OTV was introduced in 5.0(3). Any M1 linecard and the Transport Services Package license is required. F1/F2 modules DO NOT support OTV.
What is the oversubscription value if there are 25 x 4Gb host ports and 2x8Gb uplink ports:
a 4:1
b 10:3
c 6:1
d 7:1
e 5:3
And I passed this exam with 980 points.
1. At which data center layer is igmp snooping implemented?
2. which two resources can be vdc-dedicated resources?
3. which two interface can be configured with an ipv6 address?
4. Which two resources can be vdc-dedicated resources?
5. Cisco Nexus 9500 Series Switches Architecture White Paper?
6. Cisco Two factors influencing the size of the TCAM table space on the aggregation data center Switches?
7. TCAM table space on the aggregation data center Switches?
8. Cat bootflash
9. Command :- tail bootflash -
10. Cisco Nexus 5000 Series NX-OS Fundamentals Command Reference - T Commands [Cisco Nexus 5000 Series Switches].
11. At which data center layer is igmp snooping implemented?
12. Cisco Nexus 1000V Layer 2 Switching Configuration Guide, Release 4.0(4)SV1(3) - Configuring IGMP Snooping [Cisco Nexus 1000V Switch for VMware vSphere].
13. Which two interface can be configured with an ipv6 address .
14. Cisco Nexus 7000 Series NX-OS Virtual Device Context Configuration Guide - Overview [Cisco Nexus 7000 Series Switches].
15. Storage system parameters must you assess at the data center.
16. Data Center Knowledge.
17 Cisco nexus Switch that supports up to 10 gbps optical connection.
18. Two options a switch can use to perform arp validation?
19. Routing and Bridging Guide vA4(1.0) and A4(2.0), Cisco ACE Application Control Engine Module - Configuring ARP [Cisco Services Modules] - Cisco.
20. Which two actions are performed at the aggregation layer?
Congra.
Can you share to us what material you used for 300-160 exam?
Lead2pass Fake Dump VICTIM
you are designing newtwork topology for a data center that must have a maximim delay of 1.6 microseconds withinth data center. Which two option are possible switching platform for the data center
a nexus 4000
b catalys 3850
c nexus 7000
d nexus 3000
e catalyst 6500
You plan to extend a single site data center to a dual data site solution that will use an ip based layer 3 interconect using cisco nexus switches. The solution must support virtual machine migration between the two sites. whisch protocol must you use
a mpls l3vpn
b bgp
c vpls
d otv
refer to the exhibit 3. You have configured both pairs of cisco nexus 7000 switches for otv redundancy bewtween data center. which of the following otv configuration elements will prevent overlay interface from forwardinf traffic if it is not configured
a restar otv-isis
b otv stp-synchronization
c otv site-identifier
d otv vpn-name
refer to the figure exhibit 3. which item is uniquely requered when otv is configured to use a unicast control plane
a asm
b join interface
c adjacence server
d enable clasical ethernet MAC learning on edge interfaces
referd to the topology in exhibit 1. which od the following statement is true?
a all four from cisco nexus 7k to he cisco nexus 7k are forwarind
b multipath I/O form cisco UCS c200 server to fibre channel storage is unable with this topology
c The fabric extender is simultanuesly active on the cisco nexus 5k and cisco nexus 7k
d the fabric extender support FCoe
which two option decrease when using a cisco unified fabric topology as compared to an isolated fabric topology
a the number of uplinks required on the fibre channel director switches|
b the power consumption of each pod
c the number of cables requiered to connect to the pod
d the cost of data storage
e the cost per port os the channel switches
you plan to implement cisco nexus 7k in a data center. which two factors must be considered for the implementation
a each f series modules that runs fcoe requieres on fcoe license
b M.series modules support fcoe
c in storage vdc you can have only storage traffic
d f3-series modules lack support for fex
e f1-series and f2 seires modules connot exist in the same vdc
which two description os staful packet inspection are true
a evaluate each packet individually
b provides reliable access contril for layer 5, layer 6 and layer 7
c tranport to network application
d relies on only static that describes wich packets sould be allowed or droped
e provides reliable access control for layer 3 and layer 4
which two option are requeriment the RHI feature in a data center
a integreted services enebled on a cisco nexus 5k switchs
b a layer 2 connection between the service chassis and aggregation switches
c firewall services enabled on a cisco catalyst 6500 series switches
d integrated services enabled on a cisco catalyst 6500 series switces
e a rounting protocol configured between the serivices chassis and aggregation switch
which option is a characteristic of class 3 fibre channel service
a packet switching
b end to end flow comntrol
c confirmed delivery
d connection ooriented
you plan to implement a fully integreted firewall desing by using cisco catalyst 6500 series vss
a A standalone firewall applience is requiered
b the firewall can be management independenly from the cisco catalyst 6500 vss
c firewall services run at the aggregation layer
d A rounting protocol must be configured between the firewall and the cisco catalyst 6500 vss
Please send the dumps questiosn [email protected]
Please share the material that you used for 300-160 exam. I need to sit for this exam.
Sumaiya
[email protected]
Thanks
Can I also have the new questions for this!
Thanks!
Thanks
Are this set of Q&A are valid.
Can I also have the new questions for this! And forgot the email [email protected]
Thanks!
1. What action occurs before an N Port can begin exchanging data with other N Ports:
a)N Port must log in to its attached F Port
b)N Port must log in to its target F Port
c)F port must log in to its target N Port
d)F port must log in to its attached N port
e)N Port must log in to its target N Port
2. The 24bit Fibre Channel address consists of which three elements?
a)switch ID
b)domain ID
c)AS number
d)area ID
e)port ID
3. What are some features of stateful packet inspection?
a)reliable access control on layer 3 and 4
b)reliable access control on layer 5,6,7
c)transparency
d) and e) can't remember
4. What option do you have to use on a virtual switch to see all VLANs
a)disable VLAN tagging
b)virtual switch tagging
c)external switch tagging
d)virtual guest tagging
5. A question regarding Route Health Injection (RHI)
6. A question regarding the credit-based flow control process
7. Something about how can you automate the installations of new devices in the data center:
a)VPC
b)LACP
c)POAP
d)e) cant remember
8.There was a testlet with a DC topology, 2x7K, 2x5K, 2x2K, 2xMDS, disks, and it had 4 question
9. What is the oversubscription value if there are 25 x 4Gb host ports and 2x8Gb uplink ports:
a)4:1
b)10:3
c)6:1
d)7:1
e)5:3
10. There were two OTV configuration questions
If somebody remembers any other questions or has all of the new ones,please do share!
Could you kindly send the new dump to me.Thanks much! [email protected]
some can upload it thank you
i failed the exam last time and i will try to pass it again on March.
I read the student guide vol 1 & 2 + videos from Ine/Ipexpert.
But i don't find the new questions for the moment.
@All
Good luck.
François and others who have received new questions: Please mail me the same
at [email protected]
Cheers guys...
Pls kindly send the new dump to me.Thanks much! [email protected]
[email protected]
at [email protected]. thanks very much in advance!
And the email is [email protected]
at [email protected] thanks a lot in advance!
could you kindly send the dump to [email protected].
thank you very much,
thanks
Thanks Guys !
Passed today.Alhamdulillah.
dumps valid and i got 902 marks.some answers are wrong but still able to get 902 marks
Muhammad Afzal
Saudi arabia
[email protected]
Pls kindly send the new dump to me.Thanks much!
is there any labs in the exam ?
I've just passed today the test with 913. All yours new questions there was.
*Three features of Cisco Virtual Port Channel (vPC):
Dual control planes
Etherchannel protocols include Static & LACP
Appears as single logical device
*Three items of Cisco Virtual Switching System (VSS):
Single control planes
Etherchannel protocols include Static, LACP, PAgP
Appears as single switch
*Two features of the Aggregation layer in the Data Center:
Demarcation point between static and dynamic routing protocols
First-hop routing protocols
For the access layer I chose 802.1x and QoS marking but I may have been wrong but there are at least a couple questions for the access layer.
Is anybody can share the valid one
I want to schedule this certification in the next 2 weeks....please share the new questions...
Contain several errors...
Pass ~900/1000 points (need 793)
are these still valid?
Pass ~900/1000.
Have a few errors.
Still valid, score 990/1000 on 24/09/2017
The VSS/VPC, Access/Aggregate exhibit answers are incorrect as TK79 said!
I need to do exam on June 18th.
I thought the answers in exhibit diagram session was not correct but it help me passed. (I did it by myself)
If someone are going to correct them, just do it for others please
enjoy :)