Log into your Prepaway Account
Please Log In to download ETE file or view Training Course
Registration is free and easy - just provide your E-mail address.
Click Here to Register
Exam: | 200-310 - Designing for Cisco Internetwork Solutions |
Size: | 6.68 MB |
Posted: | Monday, September 18, 2017 |
Download:
|
Cisco.Passit4sure.200-310.v2017-09-18.by.avery.138q.ete |
Download Free 200-310 Exam Questions |
Log in to make your opinion count.
Registration is free and easy - just provide your E-mail address.
Click Here to Register
Use Discount Code:
A confirmation link was sent to your e-mail.
Please check your mailbox for a message from [email protected] and follow the directions.
Because the newest version from 160q does not work with ETE indicate that was made with a new version but i have the newest version of ETE
THANKS
Cleared my exam on (939/1000)Sat 10th May and let me assure that you need nothing but actualtest 157 questions as that contains everything. Good luck !!
I've got about 50-60% from the Stonecold, 30% from Zwe Thu Ko and a few questions were new. The new questions aren't difficult if you were studying hard.
I also uploaded the updated file with 157 questions updated one through old ete format hope you will be able to open it.
Got around 60-70% questions from dump and the rest were from Zwe comments bellow(though answers of couple of questions not there and unfortunately I have faced these questions and not sure about the answers of them).
It was really useful.
Thanks a lot Zwe for your sincere help!!!
Good luck all!!!
1. The benefit of colocating data center at a remote site?
redundance.
2. The three benefit of security lifecycle?
3. There was a question about the IPT design, with 1 cental location and many WAN locations, each having SRST routers. The options were: centralised, distributed, and 2 others. The correct answer is "Centralised".
I can't remember the other.
Thanks and good luck to all
I have a very very tight schedule and want to ask you if dump is still valid and no needs for other dumps.
I only used CBT Nuggets for study, any advise?
1. Security Life Cycle ( 5 Options - Security Management, Change Management, etc) (3 Select)
2. Transmit message between WLC & AP ( 4 Options - TCP 12222, UDP 12222, TCP 12223, UDP 12223) (2 Select)
3. Provide Configuration of Enterprise Network Device ( 4 Options - In Band, Out of Band, In Line, Out of Line) (2 Select)
I don't know answer above 3 new questions.
I collected other new questions for you.
1. Fastest convergence IGP protocol: - EIGRP
2. Three L2 designs for the access block: - ( looped square, looped triangle, loop free U)
3. Characteristic of campus core layer: - Fast transportation
4. Data Center cable management with high server density: - (Top of Rack, End of Row)
5. First hop redundancy for multi-vendor: - VRRP
6. Which module of enterprise contains the following: dns/http/smtp servers, firewall: - Internet connectivity
7. Glbp max count of groups: - 1024
8. What servers from the data center block need direct connection to all other blocks: - network mgmt servers
9. Which Ethernet cable will you use for long distance - 1000BASE-LX
10. Which layer is optional for small LAN (distri/access/core)
11. Three routing protocols support VLSM? - ( RIPv2, OSPF, EIGRP)
12. What IPT component supports QoS, PoE, VoIP? A2. Client endpoints or IP phones (not sure here!)
IPT Components or Four Major VOIP Components - Client endpoints, Call processing, Service applications, Voice-enabled Infrastructure
13. There was a network topology diagram (configured with EIGRP and OSPF) and the question was on which router will the redistribution be performed. - Router2 (between OSPF and
EIGRP areas).
14. There was a question about the IPT design, with 1 cental location and many WAN locations, each having SRST routers. The options were: centralised, distributed, and 2 others. The
correct answer is "Centralised".
Note - Multisite WAN with Centralized Call Processing Model
15. Which routing protocol will you use if you need the full network topology on the routers. The options were: path vector, distance vector, link-state. Ans - "link-state".
16. Which protocol is used for IPv6 with different vendor routers. 4 Options - Ripnxg, Eigrp, BGP, OSPFv3. Ans - "OSPFv3"
17. VPN benefits
http://www.ibvpn.com/2010/02/8-advantages-of-using-vpn/
The major benefits of using VPNs are flexibility, cost, and scalability.
18. VDCs:
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/virtual_device_context/configuration/guide/vdc_nx-os_cfg/vdc_create.html#wp1179784
19. Which mechanisms are required to deploy QoS on an IP WAN?
(A) queuing and scheduling (B) Call admission Control (C) traffic shaping (D) link efficiency techniques (E) traffic classification
Answer = C, D, E
20. Advantage of colocating datacenter(Ans.improved redundancy)
Good Luck :)
Thanks
1. Provide Configuration of Enterprise Network Device ( 4 Options - In Band, Out of Band, In Line, Out of Line) (2 Select)
2. uRPF modes: strict, loose, VRF
Good luck to all and Thank You
Kapss Qs:
1. Fastest convergence IGP protocol:
– EIGRP
2. Three L2 designs for the access block:
– looped square
– looped triangle
– loop free U
3. Characteristic of campus core layer:
– Fast transportation
4. Data Center cable management with high server density:
– Top of Rack
– End of Row
5. First hop redundancy for multi-vendor:
– VRRP
6. Which module of enterprise contains the following: dns/http/smtp servers, firewall:
– Internet connectivity
2 new Qs, one of them about VDC, cannot remember them but the answers are very logic and predictable, I even answered one of them without any knowledge about the content.
@esfin: no labs
138 question pool seems really small, maybe its just this particular test though
1. Fastest convergence IGP protocol:
- EIGRP
2. Three L2 designs for the access block:
- looped square
- looped triangle
- loop free U
3. Characteristic of campus core layer:
- Fast transportation
4. Data Center cable management with high server density:
- Top of Rack
- End of Row
5. First hop redundancy for multi-vendor:
- VRRP
6. Which module of enterprise contains the following: dns/http/smtp servers, firewall:
- Internet connectivity
I'm done, thanks to all for the shares, now it's your turn, Good Luck :)
I vaguely remember 2
something along the lines of
name 3 access layer best practices
loop square
loop triangle
or
loop-free square
loop-free triangle
don't remember the other options
What are the benefits of vpns
cost
flexibility
stuff like that
1)eigrp's peculiarity(ans.supports unequal path load balancing)
2)advantage of colocating datacenter(ans.improved redundancy)
3)communications ports used in data and control traffic between LWAP and WLAN controllers)
options
Got around 70% questions from dump and the rest were from comments bellow.
Check Zwe comment! It was really useful.
I studied from CBT nuggets and dump only!!! Barely read a couple of pages from the cert. guide.
Good luck all!!!
new questions which remember
1) which services provided by ISR? options are DATA, Voice, Security, Satelite and 2 more options,
2)EIGRP Question unequal cost path
Wish you Good Luck Guys
StoneCold dump still valid, excepting 1 error: that one who ask for designing a brench for 25 users - the answer is ISR G2 and 2960. Not ASA as in dump!
I got five new questions:
1. Glbp: 1024 (see bellow)
2. main characteristic of core layer: fast transport
3. access L2: loop-sq, loop-tri, loop-free-U (see bellow)
4. uRPF modes: strict, loose, VRF
5. Gbit: 1000Base-LX (see bellow)
Studied the official book for 3 months + dump
Thanks StoneCold.
Go on my friends!
Huqe
Only Studied StoneCold + the Zwe Thu Ko questions mentionned below.
Got 3-4 new questions not listed here, on ISR features & on Edge module
Good luck to everyone
4 new questions only
should be guided by the comments of " Zwe Thu Ko" are very good.
new questions I had ( 08-04-14 )
1. Three designs for the L2 access block: - ( looped square, triangle looped , loop free U)
Two . Three routing protocols support VLSM ? - ( RIPv2 , OSPF , EIGRP )
Three . Cable Data Center server management with high density: - (Top of Rack, End of Row
April . Characteristic of campus core layer: - Fast transportation
May . Fastest IGP convergence protocol: - EIGRP
6. Three designs for the L2 access block: - ( looped square, triangle looped , loop free U)
7. GLBP max count of groups: - 1024
8. First hop redundancy for multi -vendor : - VRRP
9. There was a question about the IPT design , with 1 WAN cental location and many locations , each having SRST routers. The options Were : Centralised , distributed , and 2 others . The
correct answer is " Centralised " .
10. Which protocol is used for IPv6 With Different vendor routers. 4 Options - Ripnxg , EIGRP , BGP, OSPFv3 . Ans - " OSPFv3 "
11. Which will you use Ethernet cable for long distance - 1000BASE -LX
"Wankouver
November 29th, 2017
Guys, I have a bad news. Stonecold is valid on 50% only now. Just came back from exam – got 832/1000 as ~half of questions were not from Stonecold. Luckily, I studied for CCDP and CCNP last few months and was aware of most of the topics."
:)
I have to do this exam the next Tuesday..can you write here the new question,please?
What are the ports used between WLC and LWAPP ? Answer is UDP 12222 and UDP 12223
How would you redirect smtp traffic to a specific interface (PBR, ACL…) ?
StoneCold dump still valid, excepting 1 q: that one which asks for designing a branch for 25 users - the answer is ISR G2 and 2960. Not ASA as in dump!
I got five new questions:
1. Glbp: 1024 (see bellow)
2. main characteristic of core layer: fast transport
3. access L2: (see bellow)
4. uRPF modes: strict, loose, VRF
5. Gbit: 1000Base-LX (see bellow)
Studied the official book for 3 months+ and dump
Thanks StoneCold.
Go on my friends!
I passed today with 937. there is no point wasting time, the dump is about 60% valid. Kwe Thu ko comment was helpful but you need to word hard
PASS today with 970
5 D & D and all D&D are in dump and about 5 new questions and the new questions are commented by few people in this forum.
Thank You StoneCold for this posting, GOD Bless*****
I just want to know, if there are any Labs in this exam?
thanks,
Sajid
I got 956/1000.
Thanks all
with only one new question.
Q1. Three routing protocols support VLSM? A1. RIPv2, OSPF, EIGRP
Q2. What IPT component supports QoS, PoE, VoIP? A2. Client endpoints or IP phones (not sure here!)
Q3. There was a network topology diagram (configured with EIGRP and OSPF) and the question was on which router will the redistribution be performed. A3. Router2 (between OSPF and EIGRP areas).
1. SSL VPN
2. TOP-RACK, MEDIUM-RACK
Also study the former post by other people and you will pass.
Thanks STONECOLD
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cvd/G2basicsmbrnt/G2basicsmbrnt_book/Overview.html
THese dumps are still valid go a head only few questions out of dumps , if you read ccda 4th edition then you can easily pass
Has anyone taken this exam recently, if so, can Dmitriy's comments be validated ?
Which questions in dump are there present in the exam about Drag and Drop ?!
Thanks
full
would you post your findings as i am also writing wednesday
few new questions
passed 912 no sweat
4 New q:
- Witch protocol support VLSM
- Witch routing protocol will be best in mixed env. with IPv6
- Unique EIGRP feature (about load balancing)
- There was a scheme with Area 0 and 1 with OSPF and EIGRP (all together there was 4 routers) you have to point witch router will do redistribution.
Good luck with you exam!
dump is still Valid.
wish you success.
Please share ete reader for dump.
passed today 970/1000
4 new questions
can any one confirm what are the D&D questions?
Passed to day. 1000 points.
There where 5 Q that was new.
They are all mentioned below.
Good luck to you guys
Passed today 01.11.2017 with 985.
About 3-4 new questions, but I remember only these:
1. There was a network topology diagram (configured with EIGRP and OSPF) and the question was on which router will the redistribution be performed. The answer was "Router 2" - the router connected to the OSPF Area 0 with one interface, and the EIGRP area with the other interface.
2. There was a question about the IPT design, with 1 cental location and many WAN locations, each having SRST routers. The options were: centralised, distributed, and 2 others. The correct answer is "Centralised".
3. Which routing protocol will you use if you need the full network topology on the routers. The options were: path vector, distance vector, link-state. I have chosen "link-state".
Is it still valid?
Just one new question.
Dump still valid (985/1000)
Few new questions :
Which Ethernet cable will you use for long distance (resp :1000BASE-LX)
Which layer is optional for small LAN (distri/access/core)
GLBP (resp : 1024)
Layer 2 connections types (Triangle/Square/U : http://www.cisco.com/en/US/docs/solutions/Enterprise/Data_Center/DC_Infra2_5/DCInfra_6.html)
Thanks Stonecold
5-6 new questions.
Thank you
Stonecold 98% valid. (Only 2 new questions).
I study stonecold dump ONLY.
Mark dump is not necesary.
Thanks stonecold, thanks friends.
for whom take the exam:
please post the Question here and we could find the correct answer!
thanx
dont need Marks -> only for better knowledge
New Questions:
* Valid layer 2 Access Designs in DataCenter choose 3:
• http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Data_Center/DC_Infra2_5/DCInfra_6.html
* DataCenter Rack Cabling Strategy
ToR, EoR
* Next Hop Redunancy in "mixed" environment:
VRRP
* GLBP Groups count
1024
Dump still valid (985/1000)
Few new questions :
Which Ethernet cable will you use for long distance (resp :1000BASE-LX)
Which layer is optional for small LAN (distri/access/core)
GLBP (resp : 1024)
Layer 2 connections types (Triangle/Square/U : http://www.cisco.com/en/US/docs/solutions/Enterprise/Data_Center/DC_Infra2_5/DCInfra_6.html)
Thanks Stonecold
5 new questions only - simple ones
Q. No 7, Exam F
Match protocols question... It says..
1) H.323 = CISCO IOS Gateway
2) TFTP = Provides Phone registration
Is it correct???
What route protocols supports VLSM
What IPT component supports QoS, PoE, VoIP
Someting IPT design with 1 cental location and many WAN locations SRST ...
About 5 D&D - all from Stonecold dump. Thanks Stonecold.
There were 3 new questions. Drag and drops were the same.
There was the question about selecting a method to use for SMTP interface.
Thanks to God I passed with success this exam, al hamdulillah.
this file was still valid yesterday, with 3-4 missing question maximum (maybe less even)
but everyone shoud learn really what is ccda about
and even after getting our certificate, we should learn and learn again and again, watch video, read book, try to understand everything....
until our knowledge is enough to claim that we are really ccda
May God help all of you
I wish you the best
take care
Dumps are partially valid. Got 6 new questions in exam out of 55. that were not from these dump.
Best of Luck to all exam takers!! :)
how do i open this file why becoz i downloaded ete but not working please any one who can help me to sort out...
good .. thx
Passed today 985/1000 Stonecold still Valid (4 new questions).
Thanks for all.
- DC Access Layer design
- VPN benefits
- GLBP Groups count
- Something about virtualization with answer : VPC
4 new questions, I can't remember the questions.
This dump is still valid.
Tks,
I passed today there were approximately 7 new questions. Drag and drop still the same.
Thank you
I think I got 3 new questions, the only thing that I remembered are
What Gigabit type of cable can be used for stability without needing a repeater?
And What module or service in the datacenter needs connection to all other modules in the enterprise design?
THANK YOU STONECOLD! This dump is legit and valid.
Thanks, good luck you guys!
I got 55 question and D&D 4.
I passed 970/1000. Thanks StoneCold
Is there any simulation question (Labs)
5-6 new questions. Many Thanks for the dump and valuable comments..
Best Wishes
Jimiman
I passed about an hour a go with 985 /1000
StoneCold still Valid 4 new questions
regards,
Thanks to God I passed this exam,
This file is still valid, maybe missing up to 3-4 questions maximum.
But we really should learn, reading book, watching video...
and even if we use this file to pass the exam, after getting it, we should again really learn.... until our knowledge is enough to claim that we are ccda...
I wish the best to everyone
may God help all of you,
take care
In a few hours i will be taking my exam :)
Only studied dump.
I remember 3 new questions:
1. About multicast reverse.
2. About security life cycle
3. A question about a imagen where configure redistribute.
Regards
I pass today. Stonecold 98% valid. (Only 2 new questions).
I study stonecold dump ONLY. 970/1000!!
Mark dump is not necesary.
Thanks stonecold, thanks friends.
please, are only Q20 & Q27 the only 2 wrong answers here ?
thanks guys
Could give us more details about the new questions please.
Thanks
I passed this yesterday there were approximately 3-5 new questions. Drag and drop still the same.
Thank you
Three New Questions
*What are three options for Unicast Reverse path forwarding?
*What are two options for managing outside the Enterprise Branch?
*What are three options for Security policy
there were some new questions (4 or 5 I believe)
I remembered 3 of them.
1. viable layer 2 designs ?
- looped U
- non looped-U
- looped triangle
- non-looped triangle
- looped square
- non -looped square
benifits of a VPN ?
had to select 3 out of 6, forgot the options.
next hop redundancy protocol used in mixed vendor enviroment ?
- VRRP
- HSRP
- OSFP and some other non-correct protocols.
All drag and drops from exam the were still good.
Is there any simulation (LABs) in this exam?
1. What are the three modes of urpf
2. Where in ppdioo are network requirements
3. What are modes of IPT.. options included centralised, distributed, decentralised etc
Drag and drops were same.
Hope this helps, and goodluck
I have 2 questions:
1- how many question will get in the exam?
2- including Labs like CCNA R&S or just consisting of Single and multi choses?
thanks
Thanks
Could u please give more details about the new 5 questions ?
thank u
Al hamdulillah, All thanks belong to God only, and this success was only because God allowed it.
after this;
50Q , 5 DND
if we success this exam with any dump (138q was still valid)
we should really learn stuff before, or after, and again and again until our knowledge is enough to claim that we are a real ccda;
So, we should study to get the required level
May God bless you everyone,
and I wish you the best in your studies
take care
have any one these dums in pdf?
if any one have please send me at [email protected]
thanks in advance
The correct answer for me is
Cisco Unified IP Phone
Extended Office Aironet Access Point
Cisco 880 Series Router
info
http://www.cisco.com/en/US/products/ps11579/index.html
yeah i think it's the only wrong question!! out of all 138 questions!!
Is dump enough or u have to do preparation from other dumps as well????
People who are doing postings are also dumb ..???.?
I had that question today, and I can confirm the correct answers are ISDN, MPLS and private WAN. I had 1000/1000.
All question were from dump.
Is dump enough or u have to do preparation from other dumps as well????
thanks
Passed today , dump valid , 3 new Q :
- which two network mgt approach (in-line , out-line , inband , outband)
- unicast reverse
- and an other one that I don't remember
good luck
How did you get on? good news I hope !!
Keep posting
StoneCold is valid. All Question in dump.
#Confirm Answer#
- When designing a WAN backup for voice and video applications, what three types of connections should be used? (Choose three.)
Private WAN,ISDN,MPLS
Which three technologies are recommended to be used for WAN connectivity in today's Enterprise Edge designs? (Choose three.)
DWDM,Metro Ethernet,MPLS VPN
Which of the following three options represents the components of the Teleworker Solution? (Choose three.)
Cisco Unified IP Phone,Cisco 880 Series Router,Cisco 2900 Series Router
To remember a few..
1. which protocol converges fast, I answered EIGRP.
2. which module should directly connect with all other module, I answered Network management.
3. What should be the access network topology, I answered unlooped square, triangle and U..
Not sure those were correct or not.. Just wanted to share.. Best of luck..
ISDN has PRI & BRI..
BRI = 128Kbps
PRI T1 = 1.544Mbps
PRI E1 = 2.048Mbps
I haven't looked at the question, but is that a consideration?
Thanks StoneCold.
All 55 Questions came from StoneCold's 138 Questions.
Although I studied Mark's 342 questions too.
At the End.a Big Thank You Stone Cold.
** (StoneCold's 138 Questions are a part of Mark's 342 questions).
Thank you.
Be careful: This dump has 138 questions, questions 1-110 being textual, questions 111-138 being drag and drop. Do not just use the exams A-F as they don't contain all questions. Use the range 1-138!
Again: dump is 100% valid.
I PASS 1000/1000
Thanks Stone Cold
Thanks!
Stonecold.I trust you.
I think the same.
Thank you !! All the best!!
thank you Stonecold.
It's a fairly new technology that's barely covered in the data center track. In fact there's very little about tunneling L2 over IP in the official CCDA guides. I don't understand why cisco would include it
all those who have passed, were all the questions from dump or you used others too?
From CCDA 200-310 Official Cert Guide Page 206
Note: Although ISDN has been around for many years, the industry is moving toward using broadband technologies such as cable, DSL and public wireless with IPsec VPNs. ISDN remains as an effective WAN solution only if broadband is not available.
DSL is one of the technologies in the answers. But it's not chosen. ISDN is chosen instead.
In my opinion If you just wanted to send data alone you'd get an unchannelized T1. No need for an ISDN PRI (T1 PRI). An ISDN PRI is meant (or was meant after SIP trunking took over) to save $ on phone lines by having a single circuit charge instead of the telco charging for every phone line. That was its legacy use. But I don't think a 1.5Mbps line is capable of carrying apps that do a/v. Audio, sure, maybe determined by the amount of streams, video? I don't think so. Codecs are great but they can't do miracles
For the price of a T1 (PRI or not) you could get 2 business grade DSL/Cable/FiOS connections as backups.
I'd like to hear it from someone who got 1000/1000 on the test and had this question come up.
When designing a WAN Backup for audio and video apps what 3 types of connections should be used?
definitively NOT ISDN. That answer is wrong. ISDN doesn't support anything above 128kpbs
Scored 970.
Good Luck
Allahuma Sali ala Mohammed wa Al Mohammed
paased today with 985/1000
dump is very much valid 100%