Log into your Prepaway Account
Please Log In to download ETE file or view Training Course
Registration is free and easy - just provide your E-mail address.
Click Here to Register
Exam: | 300-135 - CCNP Troubleshooting and Maintaining Cisco IP Networks (TSHOOT v2.0) |
Size: | 6.05 MB |
Posted: | Friday, September 8, 2017 |
Download:
|
Cisco.Certkiller.300-135.v2017-09-08.by.stella.65q.ete |
Download Free 300-135 Exam Questions |
Log in to make your opinion count.
Registration is free and easy - just provide your E-mail address.
Click Here to Register
Use Discount Code:
A confirmation link was sent to your e-mail.
Please check your mailbox for a message from [email protected] and follow the directions.
...
Dump 100% valid
I am reading your comments but no one answered one simple question,,, those friends who have attentted exam just tell us that TT'S come with label as come in exam files or in real exam they come without label and we will have to sort out by ourslf that either this TT belong to HSRP, SWITCH PORT TRUNK, DHCP ISSUE, ETC,,,,,,,,,,,,,,
The dumps are still valid!?
Do I need to purchase the 68q mentioned above which is 49$ so I can use it for my TSHOOT study? I am a bit confused. Is the current dump of 65q not valid anymore?
Is this dump still valid?
good luck for all
DO NOT WRITE THIS PAPER UNLESS YOU ARE COMFORTABLE WITH IPV6!
So friends, don't misguide the students, only write the correct information.
thanks, by the way i am going to attempt the exam soon.
3 IPV6
1 Port securiyt
4 OPSF redis
3 BGP Redis
1 GRE
the dump is 40 % valid
Very diffuclt exam
please kindly guide me how to use it
Thanks,
68Q dumps 100% valid one of the ticket the correct answer “no vlan filter test1 vlan-list 10″
Fiz a prova hoje em Brasília meu score foi 1000/1000.
Dear Friends, Dump Free Still Valid, pass today my Score 1000/1000.
Thanks
can any one confirm in exam when I use ipconfig on client1 it always show you that client1 get an IP address 10.2.1.3.
Thanks much
some tickets is same just be carful
When you take the exam how are the Tickets displayed?
Do you see The Topology and all the 3 subquestions of the ticket on the same screen? so you can just navigate through the questions? like is it possible to answer question 3 first and then question 1 of the ticket? ....and when your done you go to the next Ticket...
Or is it like you see the Topology and you have to answer the Tickets subsquestions 1 by 1 without the option to click back?
which dump you've used?
http://www.cisco.com/web/learning/le3/le2/le37/le10/tshoot_demo.html
But while taking this demo i faced one problem after solving one ticket 1st ticket one i moved to next ticket Topology and configs were same on all devices,,,,, regarding topology its ok but if problems would be same like previous ticket in all tickets how we would know the real issue?
Dear exam takers please tell me that when you moved to next ticket after solving first ticket have you faced same problem in real exam? How you realised the actual problem?
Or this problem comes only in this demo environment?
under the configuration mode enter“no vlan filter test1 vlan-list 10″
OR
under the configuration mode enter "no vlan access-map test 10"command
PLEASE I'M A LITTLE CONFUSED
please answer to me.
I'm going to try to give this month before 25 july.
i used At68Q dump for exam.
Is dump still valid ?
tnks
Btw, thank you prepaway.
https://www.vumingo.com/exam-testing-engine.html
United Arab EmiratesDec 05, 2017Report Comment
Dear all,
I am reading your comments but no one answered one simple question,,, those friends who have attentted exam just tell us that TT'S come with label as come in exam files or in real exam they come without label and we will have to sort out by ourslf that either this TT belong to HSRP, SWITCH PORT TRUNK, DHCP ISSUE, ETC,,
-------------------------
No labels.
please answer to me.
I'm going to try to give this month before 25 july.
I have read the book several times,
and now use 68Q Actual tests as dump
is dump valid?
plz answer
thanks
Should be “IPv6 OSPF Routing” , not “IPv4 OSPF Routing”.
Can i ask how is the structure of the exam is like? The dump is just an understanding concept of the exam structure or everything is the same?
The scenario in examm is the same that in the test?.
I read that the examm have the answer for each ticket. Which device is affected?, what is the technology affected? and What is the solution to the problem?
Mi question is, the scenario, Is it the same scenario as in the test?
Thank very much in advanced
please your share ETE update, because iam not open on the ete not update.
thank
thanks
Fiz a prova hoje em Brasília meu score foi 1000/1000.
Dear Friends, Dump Free Still Valid, pass today my Score 1000/1000.
Thanks
Be familiar with the show commands and ping. Exam is easy and watch ccnp tshoot playlist from Youtube, really its helpful.
Mail ID: [email protected]
iam purchasing prepaway 300-135 with promtion 35% ete not working . what doing
13 Tickets
Ticket 1 – EIGRP Passive Interface
Ticket 2 – BGP Neighbor
Ticket 3 – Switchport VLAN 10
Ticket 4 – NAT ACL
Ticket 5 – R1 ACL
Ticket 6 – IPv6 GRE Tunnel
Ticket 7 – IPv6 OSPF
Ticket 8 – VLAN filter
Ticket 9 – OSPF Authentication
Ticket 10 – IPv6 RIPng OSPFv3 Redistribution
Ticket 11 –Vlan Filter
Ticket 12 – OSPF to EIGRP
Ticket 13 – Switchport trunk
2 Simulators
EIGRP Simulator
Switch Simulator
8 Multi Choice Questions
6 MCs
2 Simlets (OSPF - 4Qs, EIGRP - 1Q)
13 Tshoot Tickets (without DHCP, HSRP, EIGRP AS)
Can anyone tell me if it´s still valid?
Best Ragards
can any one please tell me how to open this .ete file format? i didnot find any simulator for this format.
Repreat. They are not valid.
80% is vlaid but you can't pass the exam with them.
I recommend you would wait untill new valid dumps show up.
Thanks in advance.
Take your time with tickets.
I had 6 MCQs
2 Simlets (1 question in one and 4 in the other)
13 Tickets.
dump 68 is valid
This dump is valid.
If you study and understand the tickets and technology it is very easy.
No need for strategy or flow chart.
Just ping the device/s until you find the problem device or traceroute.
Tracert does not work on client pc but does on all other devices including ASW1.
Sh run is your friend. Just look at the config.
Most other commands won’t work like pipe |
Sh ip route works
Sh ip route eigrp works
Sh run works
Ping works
Traceroute works
IPV6 is very easy. Only three tickets and 3 issues.
Very easy to find problem especially if you know the answer.
However you need to do more than remember the issues and answers.
For those that are not doing the troubleshooting in the tickets aren’t ready and should study more.
Do the show run and find the problem. (you already know the answer)
I studied for approx 3 weeks and knew it inside out and back to front and had the confidence required.
Don’t be a paper CCNP. Do the study also.
networktut.com dump membership was the best and very very helpful.
$9 for membership is great value and will prepare you for the exam. As you can practice the commands and find the answer.
Good luck and see you in the networking world.
Now I will study CCIE R&S
What is the pontuation for success?
Thanks all!
score 1000/1000
one ticket is missing(Eigrp passive) & vlan ACL no.3 answer is wrong collect answer is 'no vlan filter test 1 vlan-list 10'
I took the tshoot 300-135 today. The ticket questions change as you select the device, technology ect. For example once you pick the device, then pick the technology, hit the back button change the device, EVERY THING CHANGES !!
one more time PAY ATTENTION TEST TAKERS !!
The tickets change and the configs CHANGE as you pick a device. The problem is there is NO instructions or any type of extra information to prep you. I had the ladies at the test center watch and see the question change. What's the point of being able to go "back" and change your answer when the ticket will literately change over and over. I stopped the test and filed an incident report with Person View.
please share your test result
thx
aynone send me tshoot dump in PDF.
Nice days
Please sent me this ete in PDF
[email protected]
Thanks.
any update this Dump is valid or the Exam changed
I wanna take this exam in 10 days, which of the above dumps is really valid and would be all I need ?
There are three questions for each card ... and always the first and second answer is very similar but the third answer is variable
Is it possible to move forward and to go back?
And do when the ship goes back profile following questions at the same time changing the middle test ticket?
Best regards
I AM NOW CISCO CERTIFIED NETWORK PROFESSIONAL!!!
HELL YES!!
1- one of questions you will have to drag the pointer to down to find the right cause of the problem. i didnt see it at beginning so be careful about that.
2- the Metodo way didnt work with me in the IPV6 (i didnt use it in ipv4 either) the only ticket still work in ipv6 as metodo the Tunnel one. and i used show run to detect the problem in other two ones. i knew it is ipv6 by pinging 209.65.200.241 and getting reply
3- at Asw1 you cant just type
plz plz plz plz
which you good luck all in finishing the exam
Anyway, The examm is not easy.
I did the test today and I have a note of 843 when the note required is 846. Bad luck!
In my examm I had many question about Ipv6. I think that questions are complicated.
Otherwise, I have doubt that some answer in test will be correct.
Do you know where I can I find more information about IPv6?
I used following method to isolate the issue. hope it can help someone else too.
1.Ping R1 (10.1.1.1) from client(PC1),if it replies fault in R1 (BGP,NAT,ACL)
2.Ping R2 (10.1.1.5) from client(PC1),if it replies fault in R1 (OSPF authentication)
3.Ping R4 (10.1.4.6) from client(PC1),if it replies fault in R4 (OSPF to EIGRP, EIGRP Passive interface)
4.Ping client PC2 (10.2.1.4) from client(PC1), if it replies fault in (DSW1 VLAN Filter) OR (ASW1 Switchport Trunk)
5.if no reply, fault is in ASW1 (Port Security, Switchport VLAN)
take care to in exam
E-mail:[email protected]
Ticket 6 – IPv6 GRE Tunnel
Ticket 7 – IPv6 OSPF (between two of the routers there is a missing statement)
What are the issues with ticket 1 and 6?
I got stuck on 3 tickets and ended up spending more time on them that I had to rush the other questions/tickets so I was a bit panicked towards the end.
I just couldn't find the problem on the 3 tickets and ended up picking any answer even though I knew it was wrong.
I scored 806 out of 846 and had been studying for over 3 weeks by pinging devices to find problems then checking the running configs.
I got the 3 IPv6 tickets and managed to get 2 of them but forgot that it was the loopback address that wasn't pingable so was my fault due to panicking due to the time I had left.
I got the BGP one where the neighbor address is wrong, port security on ASW1, 2 questions from the EIGRP simlet and a few more that I can't remember.
All the questions were from Networktut.
I had one ticket where DSW1 wasn't the primary HSRP router so all the traffic was going through DSW2 and this threw me off as to what was wrong here.
Really annoyed that I failed especially as I never just memorise the answers but always use show commands to help understand what's at fault.
The dump is still valid.
[email protected]
Dump not valid... failed today. Need actual dumps ASAP!
Passed today 303/1000 .. dumps 100% valid.
thank you very much, need to take exam by 4 days
THANKS Prepaway
DUMPS ARE 100% VALID
THE BEST WAY TO PASS THE EXAM IS TO BUILD THE EXAM TOPOLOGY IN GNS3, INDUCE THE FAULTS AND PRACTICE. THIS WILL HELP YOU GAIN CONFIDENCE,OVERCOME YOUR NERVOUSNESS,FEAR AND ANXIETY.
I FAILED THE TEST FIRST TIME BUT ADOPTED THE STRATEGY EXPLAINED ABOVE AND SUCCEEDED.
13 Tickets
Ticket 1 – EIGRP Passive Interface
Ticket 2 – BGP Neighbor
Ticket 3 – Switchport VLAN 10
Ticket 4 – NAT ACL
Ticket 5 – R1 ACL
Ticket 6 – IPv6 GRE Tunnel
Ticket 7 – IPv6 OSPF
Ticket 8 – VLAN filter
Ticket 9 – OSPF Authentication
Ticket 10 – IPv6 RIPng OSPFv3 Redistribution
Ticket 11 –Vlan Filter
Ticket 12 – OSPF to EIGRP
Ticket 13 – Switchport trunk
2 Simulators
EIGRP Simulator
Switch Simulator
8 Multi Choice Questions
The best way to pass the exam by subscribing to Networktut.com just 9$ for 1 month
Note:
Client IP seems static. It's written DHCP on the diagram but I did not have any ticket with 169.x.x.x client IP. In fact, for tickets like Access VLAN 10, clients are not supposed to get IP but still assigned 10.2.1.3 with G/W 10.2.1.254
Therefore I have followed the strategy with all tickets are as follows:
1.Check ASW1 by 3 commands:
-show vlan brief (to verify the ports fa1/0/1-2 in right Vlan vlan10 )
-show int trunk (to verify the Trunk ports are allow Vlan10)
-show run & show int fa1/0/1 and show int fa1/0/2 ( to verify the if port security configuration )
2.Check R4 by (show run) command to verify if the wrong in rang of ( ip dhcp excluded-address ) , and if the ( passive-interface default) command is apply under (router eigrp 10) .
3.If there was nothing than previously reported , After that Check if you can/cannot ping to other devices .
good luck everyone.
Congratulation, please send me valid dump to [email protected]
thanks
Thanks.
Could any one confirm plz
NO NTP, no HSRP, no DHCP
thanks you for all
Network Principles - 100%
Layer 2 Tech - 75%
Layer 3 Tech - 71%
VPN Tech - 100%
Infrastructure Security - 100%
Infrastructure Services - 0%
I got stuck on about 3 tickets that I just couldn't figure out and had to guess even though I knew the answer I was picking was incorrect. Wasted around 30 mins on those then had to rush to get the others out of the way but was ok with them.
A+ player doesn't open ETE files correctly. A+ Player tends to provide users with irrelevant files from its own repository when it's unable to open the user's ETE file. Therefore, the file you view in A+ Player might not be the file you think you have opened. Use ETE Exam Simulator or ETEViewer to play ETE files properly.
What a hard test man...
I passed by the smallest of margin 855/1000.
I was really freaking out not being able to find dhcp,eigrp miconfigs. I kept a log on my dry eraser board as I found each error on the configs I marked it down. As I got near the end of the test finding the faults was easier. But I KNEW i missed a couple tickets. On my test the IPV4 OSPF interface S0/0/0 fault was on every R1 config for each tickets. It was definitively confusing.
Keep an eye out for the tickets with the IPV6 address in the question of the ticket. An excellent clue to look and find the IPV6 errors.
TEST TAKERS !!
Study hard the config output for each ticket. Not just the solution !! I wrote each ticket and each config error down several times. Then I was writing it out by memory before the test. When I found the error it poped out like a yellow highlighter. I was armed and READY !!
This is a legit dump and networktut.com was EXCELLENT !!
For the record:
About 6 mulit choice.
OSPF simlet with only 1 question.
HSRP simlet with 4 questions.
I did find:
NAT, BGP, IPV6 on R2, R3 and R4, VLAN, Redistribute and RIP_Zone,
Hope you can send me the dumps you are using to [email protected]
Thank you.
Can someone please send my the valid dump [email protected] thanks .
Could someone confirm this
is there any way to see what tickets are which. Does it say it on the ticket on test or its not able to be viewd, curious, I failed and because I was sooooo confused on set up. That was my fault for not understanding the test, I was like ...all the questions are the same, lol. My 250$$ mistake. I will be retaking Tuesday an dim DEF ready!!
I have cleared my T-Shoot exam with 1000/1000, now i am CCNP Certified, exam is easy dont confuse, all the questions and tickets are same, just practice it.it is easy from route and switch exam.
I've now revised my strategy and am going to use the below one. I've also been obsessing over the lab to the point that I even see it in my sleep lol.
1. Try pinging the default gateway address (10.2.1.254) from Client 1 - if you get a reply, move to step 2. If you don't then it's a layer 2 issue somewhere.
2. Try pinging 209.65.200.241 from R4 or DSW1. If it works, move to step 3. If not, try from R1.
3. Try pinging 209.65.200.225 (other side of R1) from client 1. If it fails, there's most likely an access list somewhere blocking it. If you can ping it, then it's gotta be a BGP neighbor issue on R1!
I've found the key to this one is isolation. First thing is to isolate the fault by OSI layer (2 or 3). Then try to isolate it to the faulty device by using ping or trace route.
Hope that helps.
I too got a score of 806, don't feel bad (I was soooo pissed) this was my second time failing. Its all good practice, except for the 250$, im more mad at that I have to pay it once more. Anyways, I too got stuck on the layer2 tics and started to panic because of time. lol. No worries, we will get it. good luck too you sir
can sm1 send me the valid dump on
[email protected]
sitting next week for it
hurry up plzzzzzzzzzzz
thnx
Thanks for ur replay. I will try to do my best next time.
before you must to do the exercis about the sim lab of 16 ticket,
I hope that can help some retake people.
My English no good, I hope some people understand this.
I just passed my exam today, Dumps are valid only SIMs & MCQs.
Do Tickets by Networktut and do practice on PT, it will be an edge in exam.
If any help required you guys can ask.
Thanks Prepaway & networktut.
I have a problem with simulator Virtual Cert.
In current version that I have at this time, I dont allow me any test. I try to find a version of similador more current but I don´t find nothing.
Could someone tell me which version of similador used?
Where can I get this version?
in Simlets questions do we have to change configurations to make it right or they just want us to use show commands to just identify the problem?
Please hope u all answer me cuz i'll have this exam after 2 days
Could you please send me the Dump , [email protected]
Need to take exam in this week.
Really appreciate for ur help!!!.
Best regards
[email protected]
thank you in advance.
Thanks
My email address is [email protected]
please send me the dump
Thank very much in advance
Thanks ... the problem is the Demo and ticket instructions on the actual test gives you no instructions at all. "oh, by the way, ALL ticket answers will change on the spot if you decide to go back and change your selection."
I can pass the test the way Cisco wants me to no problem.
For future reference:
#1.Look at all the device configs.
#2 Find the fault
#3 Then actually open the ticket and pick your answers. (not the other way around)
No question a change was made on the 300-135. The post 2 months ago everyone is showing 1000/1000 perfect scores. Now everyone is failing...
can some one send me a valid dump
my exam next week
thanks all
Alhamdulillah, Cleared CCNP Tshoot 300-135 in just 4days of practice. 987/1000
I would advice anyone who is gonna write the exam to study the flow chart for easy understanding of the labs . Don't get nervous after seeing LAB's when you find the Lab's to be repetitive give attention to that , none of the question gets repeated in LAB.
Trace is the only option through which u can figure out the trouble in a ticket.
In IPv6 Lab's ping ipv6
good luck all ..
If you have any queries please write to me @[email protected]
I'm preparing to take the exam within two days and I'm just using show run command to solve questions.Is there anything wrong with this?
Good look.
Regards
in Simlets questions do we have to change configurations to make it right or they just want us to use show commands to just identify the problem?
Please hope u all answer me cuz i'll have this exam after 2 days
No traceroute
6 MCQ
2 simlet HSRP / EIGRP
13 tickets: no dhcp,eigrp as, nat
[email protected]
Hope you can send me the dumps you are using to [email protected].
Thank you.
Hope you can send me the dumps you are using to [email protected]
Thank you.
could some one send me valid dump plz
[email protected]
Would you please send me valid dumps on [email protected] it'd be highly appreciated.
Thank In Advance.
6MCQ,EIGRP,HSRP SimList
13 Tckets(without dhcp eclude,eigrp passive)
[email protected]
Good Luck
please advice ,
does each ticket has it is own topology with one fault , or there is one topology for more than one ticket with more than one fault.
thank you in advance.
I passed exam just 10 days back, i know what you faced in exam, same as me... but the preparation is the key to success in TSHOOT :) if any help you or any one requires share email i will coordinate with you guys.
regards,
BoBi
my email address is [email protected]
please send the dump
Can you please email me the latest dumps?
[email protected]
thanks
my email address is [email protected]
please send the dump
Thanks for the update, Kindly send me latest dump in PDF format.
[email protected]
I´m preparing this examm since November and I have the examm in next mouth.
For your comments, you say that examm is correct. Imagine that you say that because the questions and answer are good, but in the tesking, some test the answer the answer is not as explained.
In several times, It seems to explain another question
Tickets
Ticket 1 – OSPF Authentication
Ticket 2 – BGP Neighbor
Ticket 3 – NAT ACL
Ticket 4 – R1 ACL
Ticket 5 – IPv6 OSPF
Ticket 6 – IPv6 GRE Tunnel
Ticket 7 – EIGRP Passive Interface
Ticket 8 – OSPF to EIGRP
Ticket 9 – IPv6 RIPng OSPFv3 Redistribution
Ticket 10 – Port Security
Ticket 11 – Switchport VLAN 10
Ticket 12 – Switchport trunk
Ticket 13 – VLAN filter
OSPF Simulator
EIGRP Simulator
good luck everyone.
There are few question.
Are there any more questions?
if there is another test, can anyone pass me the correct test?
I have one doubt, can you please clarify that every ticket has a different configuration,i mean each ticket has its own topology window,and has its own configuration or there is only one window of topology for all ticket,
i got confused with the comments of coolartist which he mention like this
For future reference:
#1.Look at all the device configs.
#2 Find the fault
#3 Then actually open the ticket and pick your answers. (not the other way around)
[email protected]
plz plz plz plz
13 tickets
2 sims (EIGRP,1Q and OSPF, 4Q)
6 multiple choice questions
Congrats for passing.
Please send me the dump as well. Email: [email protected]
Thanks
all the best, thank you.
Please share info, study tips , etc for T-SHOOT exam. My email - [email protected] Thx alot
I am taking this exam on next Thursday. Would you please share your experience with me at about do's and don't at [email protected]. I have to take this on Thursday, since my Voucher will be expiring that day. I will appreciate your help in advance.
E-mail:[email protected]
Hello every one.
I took the exam already to day, BUT unfortunately, i failed.
i DID EVERY THING RIGHT, BUT i wonder about one thing,
Do i have to type any command in the router/switch that has the issue??
because i only choosed the right answer WITHOUT making any changes in the router/switch configuration.
Is it the cause made me failed???
I am confused, is it only mater of choosing the right answer or i had to write and correct the commands inside the router/switch as well??
Please help :(
my email address is [email protected]
please send the dump
Jose's dump still valid too or what?
Congrats for passing.
Please send me the dump as well. Email: [email protected]
Thanks
Plz send me here [email protected]
Can you please send me the dumps.
My Email Id : [email protected]
Thanks in advance for your great help
[email protected]
This Dumb or the one send by Jose are 80% valid.
Request you to guide me for the exam please . Which flow chart do I need follow ? . I am preparing and repetively khalid GNS youtube videos . Is it sufficent for the exam ?.. Can please help me list of steps to run ETE software by downloading dumps ?. Please reach me [email protected]
Thanks in Advance,
Rohsikth
I need Help, Can you kindly send me the valid dumps of (T-Shoot 300-135) on [email protected]
I'll be very grateful.
my email address is [email protected]
please send the dump
Congratulation could you please send me the valid dumps on [email protected]
please!!
[email protected]
@All: Follow the guides from networktut.com
Can you please send me the dumps.
Email Id : [email protected]
Thanks.
Congratulation
Could you please send me The valid dump to [email protected]
Thank you
Please send me dump on [email protected]
many thanks
pls send it to me
Please share the dump you used.
Thank you
[email protected]
Any new news ??
i just postponed the exam till i get new information,.. is the exam changed or something make me not ready to enter ?? as there is some comments say's that there some glitch while they having the exam.
Can you please send me the dumps.
My Email Id : [email protected]
Thanks in advance for your great help!
Total 21 questions, 6 MCQs, 2 SIMs (EIGRP & HSRP), 13 Tickets (no EIGRP-AS & DHCP & HSRP).
All the exam questions were came from that passleader 300-135 dumps offered by you!
Really Appreciate! You are a great man! @Jose Lee
my email address is [email protected]
please send me the dump. Thanks in advance
thank you very much, need to take exam by 2 days
Can you please send me the dumps.
My Email Id :[email protected]
Thanks in advance for your great help!
Can you please send me the latest dump at [email protected] ? Thanks in advance.
my email address is [email protected]
please send the dump
Could you please send me The valid dump to [email protected] .........Thank you
Please email the dump to me at
[email protected]
Thank you.
Thanks.
Could u please send me the dump at [email protected] . Thanks
Thanks in Advance.
my email address is [email protected]
please send the dump
36 quastion
lab aaadot1x , lacp , Vtp v3 , hsrp
anyone need to dump you can post the email here
Congratulation, please send me valid dumps to [email protected]
Can someone please send me pdf file for above exam. I have tried online versions but always get stuck with competition and feedback.
my email address is [email protected]
Regards
please send me the dumps at [email protected]
thaaks alot
13 Tickets
NOT appeared in the exam : DHCP exclude address, DHCP IP Helper, EIGRP AS Number, HSRP
2 Simlets : Switching and OSPF
6 MCQs : All from dump
So there were total 21 questions, sequence is random.
Tickets - study from networktut
Ticket MCQ choices - study from dump but dump doesn't have all the tickets so also refer to networktut.
Simlets and mcqs - dump. Also confirm answers at networktut. For Switching Simlet, one of the answers is "VLAN 200 not configured on SW4", not SW2. Dump has got it wrong.
When you reach into exam room, you may want to do the following :
-Before you start the exam, write down ALL the possible ticket titles. So whenever you finished 1, you can tick them
-When first ticket comes, write down all the IPs to ping step by step. You can use it for all the IPv4 tickets. This is convenient and you don't need to keep looking at diagram for IPs
-If you are really confused and not sure which ticket it is, at least verify the faulty device from ping result and go until 3rd question of the ticket. Then from answer choices, go back to device configs and verify the issue
-Take time at first few tickets and you will do much faster near the end of the exam because there are not many possibilities to think of anymore
-Client IP seems static. It's written DHCP on the diagram but I did not have any ticket with 169.x.x.x client IP. In fact, for tickets like Access VLAN 10, clients are not supposed to get IP but still assigned 10.2.1.3 with G/W 10.2.1.254. Check if you can/cannot ping to G/W.
-IPv6 tickets can be differentiated just by reading at the question. There are only 3 IPv6 tickets and easy to verify :
1) R2 - "ipv6 ospf 6 area 0" is missing at port S0/0/0.23 (Link to R3)
2) R3 - need to delete "tunnel mode ipv6" under Tunnel34
3) R4 - under ospf process, "redistribute rip RIP_Zone include-connected" is missing
These are just the tricks to be convenient and pass the exam. You still MUST understand and digest the topology and ticket issues very well.
what is strategy you use to solve ticktes
please send me on
[email protected]
Please mail me a copy of the latest dump @ [email protected]
Could you please send me the Dump , [email protected].
Need to take exam in this week.
Really appreciate for ur help.
Regards,
Please share the dump you used.
Thank you
[email protected]
please send me the valid dumb
[email protected]
Thank you
Congratulation
Could you please send me The valid dump to [email protected]
Thank you
Thanks
congratulation and best wishes
could you please pass the dump and ete player
many thanks
[email protected]
Any one have passed the exam recently?
Is It a Valid dump?
Thank you
Congratulation
Could you please send me The valid dump to [email protected]
Thank you
I want to pass my exam before the end of this month
Thank you in advance
Thanks
Please mail me a copy of the latest dump @ [email protected]
can you please share with me the new valid dumps at [email protected]
Thanks you
[email protected]
Pls send the valid dumps to [email protected].
my email address is [email protected]
please send the dump
[email protected]
Dumps are valid
21 questions
Switch SIM all questions
OSPF Simulator SIM all questions
Multiple Choice, all six questions
+++Tickets+++
OSPF Authentication
BGP Neighbor
NAT ACL
R1 ACL
VLAN filter
Port Security
Switchport VLAN 10
Switchport trunk
EIGRP AS
OSPF to EIGRP
IPv6 OSPF
EIGRP Passive Interface
IPv6 GRE Tunnel
IPv6 RIPng OSPFv3 Redistribution
Thanks Maya and Networktut
Good Luck to All
Congratulation bro, it would be highly appreciated if you send me valid dumps on [email protected]
Thank you for your cooperation.
can u send valid dumps to me: [email protected]
thank you
Congratulation, please send me valid dump to [email protected]
thanks
Cong.
please send me the valid dump, [email protected]
Please send me the valid dumps at [email protected]
Thanks a lot for your help.
This and networktut.
Can atleast confirm if the test setup and the features configured are still valid ?
Pls send me a valid dump @ [email protected]
Thanx
Many thanks as I need to do the tshoot exams this month
Thanks.
Could u please send me the dump at [email protected]. Thanks for much
Please, can you send me the dumps, for tshoot exam?
Thank you.
[email protected]
Total 21 questions, including 6 MCQs, 2 SIMs (EIGRP & HSRP), 13 Tickets (no EIGRP-AS & DHCP & HSRP).
Leave your E-mail and I will send some valid 300-135 dumps to you all!
can anyone please confirm if this is still a valid dump.
Anyone who did the exam Today please reply.
Please share the dump you used.
Thank you
Can you kindly send me the dumps on [email protected]
please send me a valid dump [email protected]
Please send me the latest dump to my email address
[email protected]
Thanks a lot for your help. Regards, rdgupta
congrat.
Can you please send me the correct pdf dump to [email protected]
thank you.
can anyone send me valid dumps at [email protected]
Please drop me a copy of the Dump. Or whoever has received it from Lee
[email protected]
Congrats for passing.
Please send me the dump as well. email: [email protected]
thanks
Congratulation
Could you please send me The valid dump to [email protected]
Thank you
Could u please send me the dump at [email protected]
thanks
Can anyone send me valid dumps on [email protected] it would be great help.
BR,
Please send me dump on [email protected]
thanks
Very much appreciated if you could share the latest dump to [email protected]
Many thanks
Good Luck.
Can you send me this valid dump to [email protected]
Many Thanks
Thanks!
Cleared my TSHOOT today with 951/1000.
My strategy was to practice the labs using packet tracer which was shared by Zeidani on August 23rd via networktut site.
Please find the link below.
For practice for tickets using packet tracer :
http://www.networktut.com/download/Cisco_PT_6_1_TSHOOT_Package.zip
Good luck to all!
congratulation and pest wishes
could you please pass the dump and ete player
many thanks
I had similar situation as yours. BGP sub questions are repeated 10times. I wrote 6 times until now failed. I raised a case with Cisco and they say they dont see any error from their end. This is really frustrating. Not sure how many of you had similar issue. Spread this message. Cisco is robbing money like anything.
my email address is [email protected]
please send the dump
my email address is [email protected]
please send the dumps.
TICKETS
=======
ping web server 209.65.200.241
if success ping that’s mean the problem in HSRP OR IPV6
No hay vecindad entre los routers R2 y R3 (show ipv6 ospf neighbor), si hay vecindad entre el R1 /R2 y R3/R4. - Encuentra el problma que la loopback de R1 no hace ping a la loopback de DSW1.
En el serial 0.0.0/23 del R2 falta agregar el comando ipv6 ospf 6 área 0
R2 - IPV6 OSPF ROUTING - SOBRE EL S0.0.0/23 AGREGAR EL COMANDO IPV6 OSPF 6 AREA 0
Problema DSW1 no se convierte en activo en el grupo 10 de HSRP.
El track decremento del DSW1 esta enganchado con el 1 en vez del 10, esto se verifica en la configuracíon de la interface vlan 10
DSW1 - HSRP - SOBRE LA INTERFACE VLAN 10, ELIMINAR EL TRACK 1 Y PONER EL TRACK 10
if not success the ping
go to ping 10.1.1.1
if success ping that’s mean the problem in R1 (bgp or ip nat or R1 ACl)
Problema de router bgp 65001 / Te das cuenta en show-running- en el router R1 y no agarra la vecindad en BGP. / Todos los Router hacen PInG al host (r1,r2,r3,r4).
neighbor 209.x.x.x remote-as 65002
R1 - BGP - DELETE NEIGHBOR Y PONER LA IP CORRECTA
Problema de NAT - Validar con show running-config - Todos los Router hacen PInG al host (r1,r2,r3,r4).
R1- IPNAT - AGREGAR EN ACL NAT_TRAFFIC PERMIT 10.2.0.0 0.0.255.255
Falta agregar el segmento de paso para BGP, sesión bgp caida - Todos los Router hacen PInG al host (r1,r2,r3,r4).
R1 - IPV4 LAYER 3 SECURITY - SOBRE EL ACCESS-LIST EXTENDED EDGE - AGREGAR EL SEGMENTO 209.65.200.224 0.0.03
if not success the ping
go to ping 10.1.1.5 (R2)
if success ping that’s mean the problem in ospf Authentication
Verifcación de vecindad entre los router R1 y R2 / El problema es la autenticación / Se percata del problemas cuando haces ping desde R2 si llegas al host, cuando haces Ping desde R1 no llegas al host.
R2 - Show run interface s0/0/0.20
R1 - Show run interface s0/0/0
ip ospf authentication message-digest
R1 - IP OSPF V4 ROUTING - ENABLE OSPF AUTHENTICATION ON THE S0/0/0
if not success the ping
go to ping 10.1.4.5 (R4 Fa0/0)
if success ping that’s mean the problem in R4 (Redistribution or Dhcp)
El host si hace PING a R4 pero no hace ping a R2,R3 y R1.
El problema es que en los rote_map la lista de distribución del ospf al eigrp no coincide con los nombres. Se verifica con los comandos show running.
R4 - IPV4 ROUTE REDISTRIBUCION - SOBRE EL PROCESO EIGRP, BORRAR EL ROUTE MAP Y PONER EL NUEVO.
if not success maby the problem in Eigrp As OR EigrpPassive
El host llega a su 10.2.1.254 (DG), pero no llega a R1,R2,R3 y R4.
el problema se refiere a una vecindad de EIGRP, no agarra vecindad los dsw1 y dsw2 con el R4, (show ip eigrp neighbor), error en R4 (Cambiar el proceso de 1 a 10).
R4 - IPV4 EIGRP ROUTING - CHANGE AS NUMBER DE 1 A 10
El host (10.2.1.3) llega a su 10.2.1.254 (DG), pero no llega a R1,R2,R3 y R4.
Sobre el sw dsw1 verificar que la vlan acl test 1 10, va enganchado con el ACl1 10 que se refiere a la IP 10.2.1.3.
DSW1 - VLAN ACL / PORT ACL - NO VLAN ACCESS-MAP TEST 1 10
other than the problem limited in Asw1 (Port secyrity or access vlan or switchport trunk)
Cliente no recibe IP por DHCP, el AWS1 si hace ping 10.2.1.254 las interfaces trunk y acceso están bien configuradas.
El problema esta que el server DHCP (R4) no esta permitiendo el grupo 10.2.1.0/24
R4 - IP DHCP SERVER - BORRAR EL EXCLUDE ADDRESS 10.2.1.1 10.2.1.53 Y COLOCAR 10.2.1.1 10.2.1.2
Verificación de los puertos de acceso, si el host no tiene IP
show int trunk
ASW1 - SWITCH-TO-SWITCH CONECTIVITY - CONF PO13 Y PO23 Y PERMITIR LAS VLAN 10,200
Verificación de los puertos de acceso, si el host no tiene IP
show running-interface fast 1/0/1 y fast 1/0/2
ASW1 - ACCESS VLAN - PUERTOS DE ACCESSO SWITCHPORT MODE ACCESS VLAN 10
Las interfaces LAN del ASW1 se han caído, tienen problemas en el puerto (show int fa 1/0/1 (err-disabled). - Validar si las interfaces están activas.
Se necesita remover el port security.
ASW1 - PORT SECURITY - INGRESAR A LAS INTERFACE, QUITAR EL PORT SECURITY Y PRENDER Y APAGAR EL PUERTO.
Can you please send me the dump 300-135. Thank you - [email protected]
Can you plz send me the dumps, this is my Email. [email protected]
Could u please send me the dump at [email protected]. Thanks for much
Today I passed CCNP Tshoot .... 1000 / 1000
all got 15 ticket
ASW1 - 3 -- Port Security , Access Vlan, Switch to switch Conn
DSW1 - 1 -- vlan acl / Port acl
R4 - 5 -- passive interface , Ipv4 Eigrp Routing, ipv4 ospf routing, ipv6 ospft routing, ipv4 route reddis
R3 - 1 -- ipv4 and ipv6 inter
R2 - 1 -- ipv6 ospf routing
R1 - 4 -- IP NAT, Ipv4 lager 3 sec, BGP, ipv4 ospf
two labs
ospf sim with 4 questions
switch sim with 4 questions
probelm in 2 question worng in dumps
vlan filter test1 vlan-list 10
switch sim correct ans is
last d
can you please share with me the new valid dumps at [email protected]
Please send me the latest dump to my email address
[email protected]
Thanks,
Would you mind sharing me the latest dumps of Tshoot at [email protected]?
Thanks.
i pass the switch exam 300-115
but comment is not in the right place
Can you kindly send me the dumps on [email protected].
kind regards
Zafar Afridi
Can you please send me valid dump to
[email protected]
Many thanks in advance
Thanks
Planning to take Exam in next week.
Thanks.
on ASW1 and DSW1 are Ok then check DHCP excluded address
statement on R4. It will be (ip dhcp exclude 10.2.1.1-10.2.1.253)
Can you please send me valid dump on [email protected]. Many thanks in advance
3 new simlet with IPv6. In dump is only one IPv6 ticket. Questions are right.
In Question 7 right answer D, not C.
This dump is not bad.
Will pass with second time 29 of june.
[email protected]
Could you please be helpful to share me the latest dumps to the following [email protected]
??
Please email the dump to me at [email protected]
Thank you.
Thanks for the info. How do we practice the tickets specially the new IPv6 ones. Networktut has old ones.
Also, how do we figure out if it is a DHCP ticket or not
Please send me the valid dumps for the T-shoot exam on my email ID:
[email protected]
all the tickets except eigrp AS , DHCP range and HSRP .
all the 6 MCQ are valid
13 ticket
2 simlets EIGRP and new switch
good luck
Congratulation
Could you please send me The valid dump to [email protected]
Thank you
my email address is [email protected]
please send the dump
All tickets except EIGRP AS, DHCP Range, and HSRP track
Sims: OSPF & Switch (4 questions each)
Prepared with CBT nuggets (especially the hands on labs that came with GNS3 topologies) and networktut dump and dumps
All the questions are on this site.
best of Luck Guys
This dump and networktut.
can u send valid dumps to me: [email protected]
thank you
Got 951/1000
All from dump
100% valid
In the questions R4 cannot be reached from client PC or the DSW1 switch.
ALl configuration on DSW1 and R4 were correct
Clint PC always has a Ip of 10.2.1.3.
something really wrong with Exam questions.
I got 21 Questions.
* 13 Tkts. (No EIGRP-AS,DHCP & HSRP)
* 2 Simlets. (Swicth SIM & EIGRP)
* 6 Multiple Choice Qus......
Done with CCNP Certification :-)
Good luck to all..
Thanks to Networktut.......
basically i want finish my ccnp and get certificate from cisco.
know cisco says your ccnp-route exam is expire you have to pass two exam to get certified.
and my cisco login says your expiry date Oct 2019
sir please help me sort out this problem..
regards
Zulfiqar Ali
Cisco ID: CSCO11907820
Islamabad,
in the point passive interface default in eigrp is confused because the command show ip eigrp neig display AS1 but the answaerd is delete or move interface to no passive
Got 1000/1000
All from dump
100% valid
This Dump is 100% valid.My score as below.
layer 2 Technology 88%
Infrastructure security 67%
Infrastructure Services 100%
All the questions seemed to be the same, ip addresses were the same. Good luck to everyone!
pass to day 1000/1000
all questions from dump expect the tow new ipv6 tickets
1)ip tunnel
2)redistribute
can anyone send me valid dunmps for the CCNP R&S tshoot exam at [email protected]
does all the ticket question have the same answers and the same question because in the dumps they all have the same question , and i dont know how we gonna to tell the difference.
Planning to take exam in next week .Can anyone please tell,these dumps are still Valid.. Please
Write all faults under each device and memorize it.
1 If you can ping R1 SUCCESSFULLY look in R1 only for all tickets that says client 1 cannot ping web server
2.if you cannot ping R1 successfully and can Ping R2 successfully- look in R1 and the answer is ospf authentication message digest
3. if you cannot ping R1 AND R2 look in asw1, R4, Dsw1 for the faults
4. For all other tickets if you can ping the web server, look in R2,R3,R4 (these are all Ipv6 tickets)
Two wrong question in this dum
correct answer are
*VACL/PACL (no vlan filter test1 vlan-list 10)
*Switch sim (vlan 200 not configured on SW4)
Dump Still valid
I have a question from anyone who has passed the exam recently
Do all the clients have the ip as 10.x.x.x or some of them have 169.x.x.x.
I was going through some strategy document on how to go about the tickets and they had this difference stated that if the client is 169.x.x.x then its port security, access vlans and switch to switch connectivity.
By the way that document is “Khattak Strategy”. Is it still Valid ?
Glad if I’m answered and helped in this regard
the dumps are valid. Had 21 questions.
6 MCQ's, 2 Simlets [EIGRP with only 1 question & HSRP with all 4 questions]
13 Tickets except DHCP range, Wrong EIGRP AS & HSRP tracking.
All the best to pending test takers.
Please share the relevant link/info about that. Ones of networktut are for the old exams.
Client 1 is hard coded with ip
Thx, P.
also for simlets do we need to just choose answer or we have to log in router and do troubleshoot steps ?
Could u please send me the dump at [email protected]. Thanks
All tickets except EIGRP AS, DHCP Range, and HSRP track
Sims: EIGRP & Switch (4 questions switch and One EIGRP) good luck for all
Please send me the Latest CCNP Tshoot Dumps on mail [email protected]
thanks
SK
any body can help me to get dump as PDF
on [email protected]
how do you do to solve tickets?
follow YOU Order tickets IN ETE or not ?
Which strategy you use to solve the tickets in exam please explain me. can you send me your email id.
Thanks in advance
Waseem, Riyadh, KSA
if success ping that’s mean the problem in HSRP OR IPV6
if not success the ping
go to ping 10.1.1.1
if success ping that’s mean the problem in R1 (bgp or ip nat or R1 ACl)
if not success the ping
go to ping 10.1.1.5 (R2)
if success ping that’s mean the problem in ospf Authentication
if not success the ping
go to ping 10.1.4.5
if success ping that’s mean the problem in R4 (Redistribution or Dhcp)
if not success maby the problem in Eigrp As OR EigrpPassive
other than the problem limited in Asw1 (Port secyrity or access vlan or switchport trunk)
Thanks. How did you guys figure out the VLAN ACL, NAT and DHCP tickets ?
like what checks did you use during the exam ?
thanks network tut
3 new tickets
All q is this dum. Thanks Maya and Networktut
21 q
2 simulation q switch(Q-4) and EIGRP(Q-1)
6 mcq
13 TT
But very care full ASW1 problem so port security,Two pc not in vlan 10,Trank link not allow vlan 10.IT is problem as a theory pc can ping it is local ip but this TT can not ping local IP.
Other one is u must read question first because IPv6 TT we can ping 209.65.200.241 but question is can't ping R1 loop back so use that IPv6 topology that TT.
become a success tshoot exam good for packet tracer practical in networktut
Two wrong question in this dum
correct answer are
*VACL/PACL (no vlan filter test1 vlan-list 10)
*Switch sim (vlan 200 not configured on SW4)
good luck all
this the dumps is still valid?
*13 tickets (3 Ipv6, no DHCP server)
*6 MCQ
*2 simlets (OSPF & New Switch)
21 total questions, you need 846/1000 to pass
Study hard! and good luck!!
I'm right now CCNP!!! :D !
I'd like to suggest that. please practise with Networktut 16 tickets.
this dump file is valid for Multiple Choice, simlet and 13 tickets only. Networktut dump Member section can practice like real exam..!!
Good Luck to you all...!!!
All questions looks the same, 3 New questions namely : BGP -OSPF - Redistribute / ntp trusted key 1 / OSPF new question 2 -
Please share strategy on how to troubleshoot and answer these tickets, as its difficult to find the fault.
one question under same scenario was outside of dumps. Still valid dumps.
Agreed with 'passed' write down the topics / tickets and config/commands related.
Best of luck....
Which Tickets Strategy used to solve the tickets in real exam please share.
Thanks in advance
Waseem
https://learningnetwork.cisco.com/community/certifications/ccnp/tshoot_v2
you will know what is it.....
We need help!!!
The show mac address-table command does not exist.
The debug ..something command does not exeist.
The show ip arp command does not exist.
Many command does not exist in real exam.
I had Troubleshooting tasks in accordance with my knowledge and experience . I was not suggesting a dump because in the first ticket I noticed that the configuration is little different than in PT labs taken from networktut. Topology is the same, addressing is little different. I failed with a score of 820.
IPv6 tickets have different problems that in dump.
Have anyone here anytime got such situation??
Thx in advance
This dump is still valid for the few multiple choice you get! The 16 troubletickets on networktut are still all valid too.
the exam have the same number?
one thing i would share you have to Complete the TT to go for next, there is no option for back to the same ticket
i need to know that the if Tickets & Simlets will come as it is with same options and answer or is there any possibility that it will change because recently my friend gave the exam and it was exactly the same. Please if some can answer because i will be giving the T-Shoot Exam soon, Watting. Thanks in Advance.
Thanks a lot Amer for your comments.
Study the tickets well and write down the topics / tickets so as to make troubleshooting easier.
Tickets are tricky because every question almost looks the same and you have to use variety of commands to identify the fault.
The following topology helped a lot in preparation
http://www.networktut.com/download/TSHOOT_Metodo.pdf
I passed the exam. Questions are same with change of order.
Be sure to practice well the tickets (networktut). Thus, you can succeed even a change happens.
Thanks,
you will not find ip 169.X.X.X
all tickets : client ip 10.X.X.X