Log into your Prepaway Account
Please Log In to download ETE file or view Training Course
Registration is free and easy - just provide your E-mail address.
Click Here to Register
Exam: | 300-210 - CCNP Security Implementing Cisco Threat Control Solutions |
Size: | 4.73 MB |
Posted: | Thursday, September 14, 2017 |
Download:
|
Cisco.Selftestengine.300-210.v2017-09-14.by.zoey.271q.ete |
Download Free 300-210 Exam Questions |
Log in to make your opinion count.
Registration is free and easy - just provide your E-mail address.
Click Here to Register
Use Discount Code:
A confirmation link was sent to your e-mail.
Please check your mailbox for a message from [email protected] and follow the directions.
Can anyone send me the Official Cert Guide for 300-210
[email protected]
All 4 D&D , ESA and IPS Question and answers. No simulations.
or can u confirm that this 271 qs valid or not?
the answer is : AUTH
SNMPv3 has three security levels:
1-authPriv
2-authNoPriv
3-noAuthNoPriv
option 1 provides authentication and encryption
option 2 provides authencation based on the Hashed Message Authentication Code (HMAC) but no encryption.
option 3 provides authencation based on the username but no encryption
Good luck for all.
Thanks,
Nick
You also need to know the rating of the ESA default:
Rating -3 to -10 and -1 to -3 and -1 to +10
The following question is definitely B:
Question-19: What does the anomaly detection Cisco IOS IPS component detection ?
A-ARP Spoofing
B-Worm-infected hosts
C-Signature changes
D-Network Congestion
Answer: B
http://www.cisco.com/c/en/us/td/docs/security/security_management/cisco_security_manager/security_manager/4-0/user/guide/CSMUserGuide_wrapper/ipsanom.pdf
There is a new lab on esa. Whichs asks information about a couple of senders and how there are handled.
From the top of my head.
- which e-mail policy will accept 5000k receivers in one e-mails. It's the orange policy.
- how big is the permitted attachment for green it's de default 10M.
- what will be done with the following reception purple, blue, .... they will all be accepted by the default accept rule.
Be certain to learn the drag and drops you will get them all.
Risk Rating Calculation
Risk rating is a quantitative measure of your network's threat level before IPS mitigation. For each event fired by IPS signatures, Cisco IPS Sensor Software calculates a risk rating number. The factors used to calculate risk rating are:
• Signature fidelity rating: This IPS-generated variable indicates the degree of attack certainty.
• Attack severity rating: This IPS-generated variable indicates the amount of damage an attack can cause.
• Target value rating: This user-defined variable indicates the criticality of the attack target. This is the only factor in risk rating that is routinely maintained by the user. You can assign a target value rating per IP address in Cisco IPS Device Manager or Cisco Security Manager. The target value rating can raise or lower the overall risk rating for a network device. You can assign the following target values:
– 75: Low asset value
– 100: Medium asset value
– 200: Mission-critical asset value
• Attack relevancy rating: This IPS-generated value indicates the vulnerability of the attack target.
• Promiscuous delta: The risk rating of an IPS deployed in promiscuous mode is reduced by the promiscuous delta. This is because promiscuous sensing is less accurate than inline sensing. The promiscuous delta can be configured on a per-signature basis, with a value range of 0 to 30. (The promiscuous delta was introduced in Cisco IPS Sensor Software Version 6.0.)
• Watch list rating: This IPS-generated value is based on data found in the Cisco Security Agent watch list. The Cisco Security Agent watch list contains IP addresses of devices involved in network scans or possibly contaminated by viruses or worms. If an attacker is found on the watch list, the watch list rating for that attacker is added to the risk rating. The value for this factor is between 0 and 35. (The watch list rating was introduced in Cisco IPS Sensor Software Version 6.0.)
you're a capo !! Thank you
1. which technique is deployed to harden network devices?
A.port-by-port router ACLs
B.infrastructure ACLs
C.transmit ACLs
D.VLAN ACLs
Respuesta B
Link: http://www.cisco.com/c/en/us/support/docs/ip/access-lists/13608-21.html
2. Which statement about the Cisco CWS web filtering policy behavior is true?
A.Rules are comprised of three criteria and an action
B.By default, the schedule is set to office hours.
C.At least one rule applies to a web request.
D.In the evaluation of a rule set, the best match wins.
Respuesta A
Link: http://www.cisco.com/c/dam/en/us/products/collateral/security/cloud-web-security/cws_anyconnect.pdf
3. How are HTTP requests handled by the Cisco WSA
A.A transparent request has a destination IP address of the configured proxy.
B.The URl for an implicit request doest not contain the DNS host.
C.An explict request has a destination IP address of the intended web server.
D.The URl for an explicit request contains the host with the protocol information.
4. Which option describes what occurs with asymmetric routing when an IPS normalization engine is enable?
a.It allows the return packets back to the source path.
b.It must see a valud SYN/ACK before it lets a flow pass, otherwise the IPS normalization engine assumes that is is encountering a fragmentation attack, and it drops the retun packets
c.It must see a valid ACK/ACK before it lets a flow pass.
d.It must see a valid SYN/ACK before it lets a flow pass, otherwise the IPS normalization engine assumes that it is in encountering an evasion attack and drops the return packets.
5. When does the Cisco ASA send traffic to the Cisco ASA IPS module for analysis?
a.before firewall policy are applied
b.after outgoing VPN traffic is encrypted
c.after firewall policies are applied
d.before incoming VPN traffic is decrypted.
Respuesta C
Link: http://www.cisco.com/c/en/us/td/docs/security/asa/asa84/configuration/guide/asa_84_cli_config/modules_ips.pdf
6. Which command applies WCCP redirection on the inside interface of a Cisco ASA 5500-X firewall?
a.web-cache interface inside 90 redirect in.
a.b.wccp interface inside 90 redirect in.
b.wccp web-cache.
c.wccp interface inside redirect out.
Respuesta B
Link: http://www.cisco.com/c/en/us/support/docs/security/web-security-appliance/117810-configure-wsa-00.html
7.Which statement about the Cisco ASA CX role in inspecting SSL traffic is true?
a.To decrypt traffic, the Cisco ASA CX must accept the websites' certificates as Trusted Root CAs.
b.If the administrator elects to decrypt traffic, the Cisco ASA CX acts as a man-in—me-middle.
c.Either all traffic is decrypted, or no traffic is decrypted by the Cisco ASA CX.
d.The traffic is encrypted, so the Cisco ASA CX cannot determine the content of the traffic.
8. When https traffic is scanned, which componet of the full URL does CWS log?
a.only path
b.only host
c.host and query
d.path and query
Respuesta D
Link: http://www.cisco.com/c/dam/en/us/products/collateral/security/cloud-web-security/data-privacy-final-source.pdf
9. For which task can PRSM be used?
a.to configure Cisco ASA CX firewalls
b.to configure Cisco ESA
c.to monitor Cisco IntelliShield
d.to monitor Cisco CWS traffic
Respuesta A
Link: https://books.google.com.pe/books?id=_0xxAwAAQBAJ
dump (242Q) + @redouane questions are valids, pass today with 97x.
Thanks for @Ahmed and @redouane ;)
The file Q242 is still valid
Thanks for @Ahmed and @redouane
Now I'm preparing 300-206 Exam.
Good Luck
https://www.dropbox.com/s/nzt96tif3t5rexm/Cisco%20300%20207%20Exam%20New%20Questions.pdf?dl=0
[email protected]
I wrote yesterday and passed with 900+
@Redouane thanks for the additional 42 questions.
I had only 1 new Question.Cant remember it
Rest of my questions came from the old Pass4sure 161q + Redouane's new questions 42q
https://www.dropbox.com/s/nzt96tif3t5rexm/Cisco 300 207 Exam New Questions.pdf?dl=0
Use the 196q dumps and my PDF file with 42 new questions.
I failed this exam 3 months ago with 196Q file because at that time new questions appeared in this exam.As far as i remeber some new questions wich appeared at that time are the same what we have here from Redouane and Pebe.I ask again if anybody is able to tell me whether 196Q premuim exam is the same one wich i bought here 3 months ago.The number of questions 196 are the same so by using this logic this should be still the same one.If that's the case i would avoid to buy the second time the same 196Q file and use my existing one in combination with Redouane and Pebe questions .I would appreciate your answer so i can schedule my last CCNP sec exam on monday or tuesday.
Can someone help me I failed my exam today. :( Where I can download the latest 196q and 42q?
I had only drag&drop questions, not labs.
New question is what is enabled at IOS router by default?
I choose password-recovery, don't remember the rest.
Learn 196+42 dumps and u can make it! My result was 930/1000.
Good luck!
196+42 dump is valid.
have 2-3 new questions.
thank u guys!
insha alla. amen. etc
Hi Mike, is there a question on SNMP and one on What is configured by default on the router in the new dump as I hear these have come up in the exam recently.
Whether the dump 242 questions are covered in the above 271 questions?
We were unable to publish your comment with 42 questions completely because of technical failure.
Thank you for share these questions with our readers in dropbox.
Good luck to all future testers.
Which configuration keyword will configure SNMPv3 with authentication but no encryption?
1-Auth priv
2-priv
3-no auth
4-auth
The answer is "auth", in 300-209 file it's answer choices differ from the Real exam. Good luck !
I managed to pass the 300-210 exam yesterday with 899, I has similar questions to Neeles (Posted 26th Dec. 2019), I had only 1 drag and drop which was cisco firepower module preprocessors, I was expecting alot more drag and drops. the hardest one I had which I was NOT expecting was configuring an ISR G2 router for cisco CWS connectivity, it took me around 15 minutes to do that but I think I managed it.
Good luck to all who are going for it....
Sajjad
@Redouane greatly appreciate your work for getting us successfull in our exams. Thank You so much.
Which a set of IOS commands enable inspection from 10.1.1.0/24 to 192.168.1.0/24 in the default class-map?
hostname(config)#access-list inspect extended permit ip 10.1.1.0 255.255.255.0 192.168.1.0 255.255.255.0
hostname(config)# class-map inspection_default
hostname(config-cmap)# match access-list inspect
The question is for the default class-map, and the ASA has the default class-map called: inspection_default, and the router does not have a default class-map, also as i mentioned, the ASA uses the normal mask, so any choice with a widcard mask is wrong.
redouane - thank you for your questions.
see the following link:
http://www.cisco.com/c/en/us/support/docs/security/email-security-appliance/118112-technote-esa-00.html
Yesterday I passed the exam 60 Questions 2 Simlets, 4 drag and drop you pass with 864 is still valid 196Q
+ 42 new Q.
good luck
Can you shed any light on the new questions you mentioned. Thanks
Also did you encounter any simulations/simlets in your exam? Thanks
Only had one new Question it was " What is enabled by default on a Cisco IOS router"
1-service password-encryption
2-service password recovery
3-crypto rsa key
4-SSH
My answer was service password recovery.
My options that i have mentioned here are not entirely accurate but this was the ONLY new question alright.
Also got 3 Drag & Drop & one IPS Q&A SIM & one ESA Q&S SIM. All of them are in the file. Good Luck
I have 196q version 8. Is this the newest one?
as far as I'm aware any simlets/simulations are in the 196q dump. Some have not had any and others have had 2 but there are more than 2 in the dump. Some have only had the 4 drag and drop questions which are not in the dump but in the file for new questions. There a Cisco IDM simlet, a WSA -WCCP-ASA simlet, and a Mail policies simlet. There are simulations for deploying IPS, connecting ASA to Cx and ISR-G2 to CWS.
Anyone attempted this exam i the last couple days? I plan to schedule it on wednesday.
Can anyone wrote exam using the above ETE file? is this valid file to pass ?
I want to know if we can still expect labs in the exam, specifically the ones on Q 191 (Match traffic which traverses inside traffic) and Q 192 (configure the CWS connector on ISR G2 router)? These are both from 196 q dump.
Can someone please confirm ASAP? Thanks in advance friends.
Could you tell me where i can get the 196q dumps. Would be much appreciated.
I included this question in my PDF file.
about 4 drag and drops about IntelliShield, implementing and deploying Cisco IPS, implementing and deploying ASA with multi context mode.
Also few easy questions like
1) How will the password 'cisco' be encrypted
username admin password cisco
service password-encryption
2) How will the password 'cisco' be encrypted
username admin secret cisco
no service password-encryption
Thanks a lot to @Redouane and @pebe for their contribution.
I recommand to review all the Labs in the 196Q dump including lab sim and lab simlet.
First Drag and Drop:
fidelity rating-----degree of attack certainty
severity rating------- amount of potential damage
target value rating-----criticality of attack target
promiscuous delta-----accuracy difference from inline sensing
relevancy rating-----vulnerability of attack target
watch list rating---- cisco security agent rating
Second Drag and Drop:
Step-1: Download IPS files from cisco.com
Step-2: Configure the Cisco IOS IPS crypto key
Step-3: Enable Cisco IOS IPS
Step-4: Load the Cisco IOS IPS signature package to the router
Third Drag and Drop:
web portal-----customer interface
back-end intelligence engine-----threat data collection
threat outbreak alert-----latest data regarding threats
built-in workflow system-----tracking vulnerability remediation
historical database-----past threat and vulnerability information
vulnerability alerts-----based on the CVSS rating system
Fourth Drag and Drop:
Step 1: Define interfaces and subinterfaces on the physical appliance.
Step 2: Define an admin context for administering the base security appliance.
Step 3: Define each virtual firewall on the base appliance.
Step 4: Deploy to generate the virtual firewalls as children of the base appliance.
Step 5: Define additional settings for each security context.
Just the drag-and-drops, all four1
I think the answer of below question is B. with delegated administrator roles you will increase the security and will reduce it if you allow all users to management access.
Question-12: Which action cloud reduce the security of the management interface of the Cisco ESA appliance?
a. Assign delegated administrator roles to engineers who manage the mail policies.
b. create a network access list to allow all connections to the management interface
c. Display a login banner indicating that all appliance use is logged and reviewed
d. configure a web UI session timeout of 30 minutes for connected users.
Answer : A
Thanks for dumps from Redouane and Pete.
question 73 (part of the IDM simlet) in the dump is incorrect. There is no explanation how to obtain the correct information. It is as follows:- Configuration>Policies>EventActionRules>Rules0 and then select the General tab at the far right. You might need to scroll to find it. Only 2 answers required. The maximum number of denied attackers is set to 10000 Deny attacker duration 3600s Block Action Duration 30 minutes so correct answer for this is A,C.
Question-1: Refer to the exibit:
R01(config)#ip wccp web-cache redirect-list 80 password-local
A-Traffic denied in prefix-list 80 is redirected to the Cisco WSA
B-The default "cisco" password is configured on the Cisco WSA
C-Traffic permitted in access-list 80 is redirected to the Cisco WSA
D-Traffic using TCP port 80 is redirected to the Cisco WSA
Answer is : C
Question-2: For which task can PRSM be used ?
A-To configure Cisco ASA CX firewalls
B-To monitor Cisco intelliShield
C-To monitor CWS traffic
D-To configure Cisco ESA
Answer is : A
Question-3: which command applies WCCP redirection on the inside interface of a cisco asa 5500-x firewall?
A-wccp interface inside 90 redirect in
B-web-cache interface inside 90 redirect in
C-wccp interface inside redirect out
D-wccp web-cache
Answer is : A
Question-4: Which IPS signature engine inspects the IP protocol packets and the Layer TCP
A-String TCP
B-Atomic TCP
C-Service HTTP
D-Atomic IP
Answer is : D
Question-5: Which statement about the Cisco CWS web filtering policy behavior is true?
A. Rules are comprised of three criteria and an action.
B. By default, the schedule is set to office hours.
C. At least one rule applies to a web request.
D. In the evaluation of a rule set, the best match wins.
Answer A
Question-6: How are HTTP requests handled by the Cisco WSA
a. A transparent request has a destination IP address of the configured proxy.
b. The URI for an implicit request doest not contain the DNS host.
c. An explict request has a destination IP address of the intended web server.
d. The URI for an explicit request contains the host with the protocol information.
Answer D
Question-7: Which option describes what occurs with asymmetric routing when an IPS normalization engine is enable?
a. It allows the return packets back to the source path.
b. It must see a valud SYN/ACK before it lets a flow pass, otherwise the IPS normalization engine assumes that is is encountering a fragmentation attack, and it drops the retun packets
c. It must see a valid ACK/ACK before it lets a flow pass.
d. It must see a valid SYN/ACK before it lets a flow pass, otherwise the IPS normalization engine assumes that it is in encountering an evasion attack and drops the return packets.
Answer D
Question-8: Which statement about the Cisco ASA CX role in inspecting SSL traffic is true?
a. To decrypt traffic, the Cisco ASA CX must accept the websites' certificates as Trusted Root CAs.
b. If the administrator elects to decrypt traffic, the Cisco ASA CX acts as a man-in—me-middle.
c. Either all traffic is decrypted, or no traffic is decrypted by the Cisco ASA CX.
d. The traffic is encrypted, so the Cisco ASA CX cannot determine the content of the traffic.
Answer B
Question-9: When https traffic is scanned, which component of the full URL does CWS log?
a. only path
b. only host Y
c. host and query
d. path and query
Answer B
Question-10: Using the Cisco WSA GUI, where should an operator navigate to determine the running sotfware image on the Cisco WSA?
a. Systems Administration > Feature Keys
b. Systems Administration > System Upgrade
c. Admin > System info
d. Systems Administration > General
Answer B
Question-11: Which step is required when you configure URL filtering to Cisco Cloud Web Security?
a. configure URL filtering policies in Cisco ScanCenter
b. install the ASA FirePOWER module on the Cisco ASA.
c. Implement Next Generation IPS instrusion rules.
d. Configure URL filtering criteria in the Cisco ASA FirePOWER access rules.
Answer A
Question-12: Which action cloud reduce the security of the management interface of the Cisco ESA appliance?
a. Assing delegated administrator roles to engineers who manage the mail policies.
b. create a network access list to allow all connections to the management interface
c. Display a login banner indicating that all appliance use is logged and reviewed
d. configure a web UI session timeout of 30 minutes for connected users.
Answer A
Question-13: A security engineer is configuring user identity for the Cisco ASA connector for Cisco CWS. How many AAA server groups must the engineer configure
a. 1
b. 3
c. 4
d. 2
Answer D
Question-14: which option represents the cisco event aggregation product?
a. CVSS system
b. IntelliShield
c. ASA CX Event Viewer
d. ASDM 7.5
Answer: C
Question-15: Which statement about the default configuration of an IPS sensor's management security settings is true?
a. There is no login banner
b. The web server port is TCP 80
c. Telnet and SSH are enable
d. User accounts lock after three attempts
Answer A
Question-16: Which information does the show scansafe statistics command provide?
A-ESA message tracking
B-PRSM events
C-AV statistics
D-Cisco CWS activity
Answer: D
Question-17: On which plateforms can you run CWS connector? (choose two)
A-Cisco ASA Firewall
B-Cisco IPS module
C-Standalone deployment
D-Cisco ISR router
E-Cisco Firepower NGIPS
Answer: A and D
Question-18: Refer to the exhibit Which description of the result of this configuration is true?
Router(config)#line vty 5 15
Router(config-line)#access-class 23 in
A-Only clients denied in access list 23 can manage the router.
B-Only telnet access (TCP) is allowed on the VTY lines of this router
C-Only clients permitted in access list 23 can manage the router
D-Only SSH access (TCP 23) is allowed on the VTY lines of this router.
Answer: C
Question-19: What does the anomaly detection Cisco IOS IPS component detection ?
A-ARP Spoofing
B-Worm-infected hosts
C-Signature changes
D-Network Congestion
Answer: B (I think)
Question-20: Refer to the exhibit . The security engineer has configured cisco cloud web security redirection on a cisco ASA firewall. Which statement describes what can be determined from exhibit?
authUserName: LAB\user1
authenticated: true
companyName: Companyl
countryCode: US
externalIP: 209.165.200.241
groupNames:
- Test Lab
- "LAB://testgroup'l
logicalTowerNumber: 197
staticGroupNames:
- Test Lab
- "LAB://testgroup'l
userName: userl
A-In case of issues, the next step should be to perform debugging on the cisco ASA.
B-The URL visited by the user was LAB://testgroup.
C-This out has been obtained by browsing to whoami.scansafe.net
D-The IP address of the Scansafe tower is 209.165.200.241
Answer: C
Question-21: Refer to the exhibit. How is the “cisco” password stored?
Router (config) #username admin secret cisco
Router (config) #no service password-encryption
a. As MD5 hash
b. As Type 0
c. As Type 7
d. As Clear Text
Answer: A
Question-22: Refer to the exhibit. What type of password is “cisco”?
Router(config)#service password-encryption
Router(config)#username admin password cisco
a. Enhanced
b. CHAP
c. Type 7
d. Type 0
Answer: C
Question-23: When does the Cisco ASA send traffic to the Cisco ASA IPS module for analysis?
a.before firewall policy are applied
b.after outgoing VPN traffic is encrypted
c.after firewall policies are applied
d.before incoming VPN traffic is decrypted.
Answer: C
Question-24: which technique is deployed to harden network devices?
A.port-by-port router ACLs
B.infrastructure ACLs
C.transmit ACLs
D.VLAN ACLs
Answer: B
Question-25: Refer to the exhibit. Which option describe the result of this configuration on a Cisco ASA firewall?
asafwl (config) #http server enable
asafw1(config)#http 10.10.10.1 255.255.255.255 inside
a. The firewall allows command-line access from 10.10.10.1
b. The firewall allows ASDM access from a client on 10.10.10.1
c. The management IP address of the firewall is 10.10.10.1
d. The inside interface IP address of the firewall is 10.10.10.1
Answer: B
Question-26: Which Option of SNMPv3 ensure authentication but no encryption?
Correct answer: Auth
Question-27: Which commands are required to configure SSH on router? (Choose two)
Correct answers are:
1-configure domain name using ip domain-name command
2-generate a key using crypto key generate rsa
Question-28: ECLB load balancing with IPS,
Correct answer: The IPS solution does not maintain state if a sensor goes down and that TCP flow is forced through a different IPS appliance.
There are four drag and drop and here the solution:
First Drag and Drop:
fidelity rating-----degree of attack certainty
severity rating------- amount of potential damage
target value rating-----criticality of attack target
promiscuous delta-----accuracy difference from inline sensing
relevancy rating-----vulnerability of attack target
watch list rating---- cisco security agent rating
Second Drag and Drop:
Step-1: Download IPS files from cisco.com
Step-2: Configure the Cisco IOS IPS crypto key
Step-3: Enable Cisco IOS IPS
Step-4: Load the Cisco IOS IPS signature package to the router
Third Drag and Drop:
web portal-----customer interface
back-end intelligence engine-----threat data collection
threat outbreak alert-----latest data regarding threats
built-in workflow system-----tracking vulnerability remediation
historical database-----past threat and vulnerability information
vulnerability alerts-----based on the CVSS rating system
Fourth Drag and Drop:
Step 1: Define interfaces and subinterfaces on the physical appliance.
Step 2: Define an admin context for administering the base security appliance.
Step 3: Define each virtual firewall on the base appliance.
Step 4: Deploy to generate the virtual firewalls as children of the base appliance.
Step 5: Define additional settings for each security context.
There two Lab Simlet, IPS IDM manager and Email Security Appliance.
A. Rules are comprised of three criteria and an action
B. By default, the schedule is set to office hours.
C. At least one rule applies to a web request.
D. In the evaluation of a rule set, the best match wins.
Answer A or C ?
please can help?
What did your exam consist of by way of drag & drops, simulations and sims? Thanks
I passed 300-210 something around 960, preparing from: 196q + redouane 42q
I had 60 question 4 drag and drops and 2 simlets ESA and IDS, Passing score something around 860
I want to draw your attention on some points:
On exam there was one new question which was not in the above mentioned docs, something about configuring inspection with class maps, Which command is neccesery to configure traffic inspection on cisco IOS - there were 4 options, 2 were obvious wrong and 2 of them were access-list with wildcard mask and normal. I choose option with wildcard mask (I assumed its for router not ASA).
2 drag and drops need to aline from top to down and 2 of them should match from left side to right - be carefull when learning!
IDS simlet: 1 question vary from test to test its:
Which three statements about the Cisco IPS appliance configurations are true?
In my case it was:
- The maximum number of denied attackers is set to 10000
- The Meta Event Generator is globally enabled?
BUt others reported and this one in combination:
- The block action duration is set to 3600sec
This info you can find in: Configuration>Policies>EventActionRules>Rules0 and then select the General tab at the far right.
Good luck to all!
The pdf file of 196Q says it is version 11.0
Free 271q is ok about 50%.
But both contain 1-2 mistakes in answers.
new questions.
1.
|--------------------------------------|
|Router(config)#line vty 5 15 |
|Router(config-line)#access-class 23 in|
|--------------------------------------|
a. Refer to the exhibit Which description of the result of this configuration is true?
a. Only clients denied in access list 23 can manage the router.
b. Only telnet access (TCP) is allowed on the VTY lines of this router
c. Only clients permitted in access list 23 can manage the router
d. Only SSH access (TCP 23) is allowed on the VTY lines of this router.
2.
|-------------------------------|
|authUserName: LAB\user1 |
|authenticated: true |
|companyName: Companyl |
|countryCode: US |
|externalIP: 209.165.200.241 |
|groupNames: |
|- Test Lab |
|- "LAB://testgroup'l |
|logicalTowerNumber: 197 |
|staticGroupNames: |
|- Test Lab |
|- "LAB://testgroup'l |
|userName: userl |
|-------------------------------|
Referent to the exhibit . The security engineer has configured cisco cloud web security redirection on a cisco ASA firewall. Which statement describes what can be determined from exhibit?
a. In case of issues, the next step should be to perform debugging on the cisco ASA.
b. The URL visited by the user was LAB://testgroup.
c. This out has been obtained by browsing to whoami.scansafe.net
d. The IP address of the Scansafe tower is 209.165.200.241
3.
|------------------------------------------------|
|Router (config) #username admin secret cisco |
|Router (config) #no service password-encryption |
|------------------------------------------------|
Refer to the exhibit. How is the “cisco” password stored?
a. As MD5 hash
b. As Type 0
c. As Type 7
d. As Clear Text
4.
|--------------------------------------------|
|Router(config)#service password-encryption |
|Router(config)#username admin password cisco|
|--------------------------------------------|
Refer to the exhibit. What type of password is “cisco”?
a. Enhanced
b. CHAP
c. Type 7
d. Type 0
5.
|------------------------------------------------------|
|asafwl (config) #http server enable |
|asafw1(config)#http 10.10.10.1 255.255.255.255 inside |
|------------------------------------------------------|
Refer to the exhibit. Which option describe the result of this configuration on a Cisco ASA firewall?
a. The firewall allows command-line access from 10.10.10.1
b. The firewall allows ASDM access from a client on 10.10.10.1
c. The management IP address of the firewall is 10.10.10.1
d. The inside interface IP address of the firewall is 10.10.10.1
6.
|---------------------------------------------------------------|
|r01 (config) #ip wccp web-cache redirect-list 80 password local|
|---------------------------------------------------------------|
Refer to the exhibit. What can be determined from this router configuration command for Cisco WSA?
a. Traffic permitted in access-list 80 is redirected to the Cisco WSA.
b. The default “cisco” password is configured on the cisco WSA.
c. Traffic denied in prefix-list 80 is redirecred to the Cisco WSA.
d. Traffic using TCP port 80 is redirected to the Cisco WSA.
Anyone preaparing to take the exam soon - go ahead and go quickly with full confidence before they change the exam.
Thanks to this site owners
God Bless
Can you share :
-the drag and drops question faced at exam ---if lab sim occured
-any new questions different from dumps
-Major topics to focus.
-Currently most accurate dumps.
Q1: refer to the exibit
R01(config)#ip wccp web-cache redirect-list 80 password-local
A-Traffic denied in prefix-list 80 is redirected to the Cisco WSA
B-The default "cisco" password is configured on the Cisco WSA
C-Traffic permitted in access-list 80 is redirected to the Cisco WSA
D-Traffic using TCP port 80 is redirected to the Cisco WSA
Answer is : C
Q-2 For which task can PRSM be used ?
A-To configure Cisco ASA CX firewalls
B-To monitor Cisco intelliShield
C-To monitor CWS traffic
D-To configure Cisco ESA
Answer is : A
Q-3: which command applies WCCP redirection on the inside interface of a cisco asa 5500-x firewall?
A-wccp interface inside 90 redirect in
B-web-cache interface inside 90 redirect in
C-wccp interface inside redirect out
D-wccp web-cache
Answer is : A
Q-4: Which IPS signature engine inspects the IP protocol packets and the Layer TCP
A-String TCP
B-Atomic TCP
C-Service HTTP
D-Atomic IP
Answer is : D
https://www.dropbox.com/s/nzt96tif3t5rexm/Cisco%20300%20207%20Exam%20New%20Questions.pdf?dl=0
Use the 196q dumps and my PDF file with 42 new questions.
Best regards
fidelity rating : degree of attack certainty
severity rating : amount of potential damage
target value rating : criticality of attack target
promiscuous delta : accuracy difference from inline sensing
relevancy rating : vulnerability of attack target
watch list rating : cisco security agent rating
Drag and Drop IPS signature, approximatively as follow:
Step 1: Find the description of the
attack or exploit
Step 2: describe the attack trigger or
consequence in the IPS engine
configuration language
Step 3: test the signature
Step 4: tune the signature for false
positives and negatives
Step 5: deploy the signature
Also there another new question about ECLB load balancing with IPS, the correct answer is :
The IPS solution does not maintain state if a sensor goes down and that TCP flow is forced through a different IPS appliance.
Another new question about Cisco ASA, take care the mask used by the ASA in ACL is not a widcard mask, the answer is:
Which a set of IOS commands enable inspection from 10.1.1.0/24 to 192.168.1.0/24 in the default class-map?
hostname(config)#access-list inspect extended permit ip 10.1.1.0 255.255.255.0 192.168.1.0 255.255.255.0
hostname(config)# class-map inspection_default
hostname(config-cmap)# match access-list inspect
New cuestión, please valid
21. Drag and drop the steps on the left into the correct order on the right to configure a Cisco ASA NGFW with multiple security contexts.
Deploy to generate the virtual firewall as children of the base appliance.
define additional settings for each security context.
-Define each virtual firewall on the base appliance.
-Define interfaces and subinterfaces on the physical appliance.
-Define an admin context for administering the base security appliance.
Respuesta
Step 1 : Define interfaces and subinterfaces on the physical appliance.
Step 2: Define an admin context for administering the base security appliance.
Step 3: Define each virtual firewall on the base appliance.
Step 4: Define additional settings for each security context.
Link: http://www.cisco.com/c/en/us/td/docs/security/security_management/cisco_security_manager/security_manager/4-4/user/guide/CSMUserGuide_wrapper/pxcontexts.pdf. Pagina 57
22. Drag and drop the Cisco Security InstelliShield Alert MAnager Services Components on the left onto the corresponding description on the right.
web portal customer interface
back-end intelligence engine threat data collection
threat outbreak alert latest data regarding threats
built-in workflow system tracking vulnerability remediation
historical database past threat and vulnerability information
vulnerability alerts based on the CVSS rating system
-tracking vulnerability remediation
- customer interface
-past threat and vulnerability information
-based on the CVSS rating system
--threat data collection
- latest data regarding threats
Link: https://books.google.com.pe/books?id=HYunn5qa9i0C
I've bought 196Q file 3 months ago but unfortunately i've failed my first attemp.If i look the number of questions it seem to be still the same file,am i right? Could anyone confirm it? If that's the case i would use it Redouane and Pebe questions.
Man, you are da Man!
Thank you so much for your valuable contribution to community. I guess we now know about half of new questions, just need another 10 or so and that would be it.
here the new questions that you should use in combination with 196q dump, two Lab Simlet, IPS IDM manager and Email Security Appliance. it's enough to success.
Question-2: For which task can PRSM be used ?
A-To configure Cisco ASA CX firewalls
B-To monitor Cisco intelliShield
C-To monitor CWS traffic
D-To configure Cisco ESA
Answer is : A
Question-3: which command applies WCCP redirection on the inside interface of a cisco asa 5500-x firewall?
A-wccp interface inside 90 redirect in
B-web-cache interface inside 90 redirect in
C-wccp interface inside redirect out
D-wccp web-cache
Answer is : A
Question-4: Which IPS signature engine inspects the IP protocol packets and the Layer TCP
A-String TCP
B-Atomic TCP
C-Service HTTP
D-Atomic IP
Answer is : D
Question-5: Which statement about the Cisco CWS web filtering policy behavior is true?
A. Rules are comprised of three criteria and an action.
B. By default, the schedule is set to office hours.
C. At least one rule applies to a web request.
D. In the evaluation of a rule set, the best match wins.
Answer A
Question-6: How are HTTP requests handled by the Cisco WSA
a. A transparent request has a destination IP address of the configured proxy.
b. The URI for an implicit request doest not contain the DNS host.
c. An explict request has a destination IP address of the intended web server.
d. The URI for an explicit request contains the host with the protocol information.
Answer D
Question-7: Which option describes what occurs with asymmetric routing when an IPS normalization engine is enable?
a. It allows the return packets back to the source path.
b. It must see a valud SYN/ACK before it lets a flow pass, otherwise the IPS normalization engine assumes that is is encountering a fragmentation attack, and it drops the retun packets
c. It must see a valid ACK/ACK before it lets a flow pass.
d. It must see a valid SYN/ACK before it lets a flow pass, otherwise the IPS normalization engine assumes that it is in encountering an evasion attack and drops the return packets.
Answer D
Question-8: Which statement about the Cisco ASA CX role in inspecting SSL traffic is true?
a. To decrypt traffic, the Cisco ASA CX must accept the websites' certificates as Trusted Root CAs.
b. If the administrator elects to decrypt traffic, the Cisco ASA CX acts as a man-in—me-middle.
c. Either all traffic is decrypted, or no traffic is decrypted by the Cisco ASA CX.
d. The traffic is encrypted, so the Cisco ASA CX cannot determine the content of the traffic.
Answer B
Question-9: When https traffic is scanned, which component of the full URL does CWS log?
a. only path
b. only host
c. host and query
d. path and query
Answer B
Question-10: Using the Cisco WSA GUI, where should an operator navigate to determine the running sotfware image on the Cisco WSA?
a. Systems Administration > Feature Keys
b. Systems Administration > System Upgrade
c. Admin > System info
d. Systems Administration > General
Answer B
Question-11: Which step is required when you configure URL filtering to Cisco Cloud Web Security?
a. configure URL filtering policies in Cisco ScanCenter
b. install the ASA FirePOWER module on the Cisco ASA.
c. Implement Next Generation IPS instrusion rules.
d. Configure URL filtering criteria in the Cisco ASA FirePOWER access rules.
Answer A
Question-12: Which action cloud reduce the security of the management interface of the Cisco ESA appliance?
a. Assing delegated administrator roles to engineers who manage the mail policies.
b. create a network access list to allow all connections to the management interface
c. Display a login banner indicating that all appliance use is logged and reviewed
d. configure a web UI session timeout of 30 minutes for connected users.
Answer A
Question-13: A security engineer is configuring user identity for the Cisco ASA connector for Cisco CWS. How many AAA server groups must the engineer configure
a. 1
b. 3
c. 4
d. 2
Answer D
Question-14: which option represents the cisco event aggregation product?
a. CVSS system
b. IntelliShield
c. ASA CX Event Viewer
d. ASDM 7.5
Answer: C
Question-16: Which information does the show scansafe statistics command provide?
A-ESA message tracking
B-PRSM events
C-AV statistics
D-Cisco CWS activity
Answer: D
Question-17: On which plateforms can you run CWS connector? (choose two)
A-Cisco ASA Firewall
B-Cisco IPS module
C-Standalone deployment
D-Cisco ISR router
E-Cisco Firepower NGIPS
Answer: A and D
Question-19: What does the anomaly detection Cisco IOS IPS component detection ?
A-ARP Spoofing
B-Worm-infected hosts
C-Signature changes
D-Network Congestion
Answer: B (I think)
Question-20: exhibit . The security engineer has configured cisco cloud web security redirection on a cisco ASA firewall. Which statement describes what can be determined from exhibit?
authUserName: LAB\user1
authenticated: true
companyName: Companyl
countryCode: US
externalIP: 209.165.200.241
groupNames:
- Test Lab
- "LAB://testgroup'l
logicalTowerNumber: 197
staticGroupNames:
- Test Lab
- "LAB://testgroup'l
userName: userl
A-In case of issues, the next step should be to perform debugging on the cisco ASA.
B-The URL visited by the user was LAB://testgroup.
C-This out has been obtained by browsing to whoami.scansafe.net
D-The IP address of the Scansafe tower is 209.165.200.241
Answer: C
Question-21: exhibit. How is the “cisco” password stored?
Router ( config )
a. Sensors, when placed in-line, can impact network functionality during sensor failure.
b. IDS has impact on the network (thatis, latency and jitter).
c. Response actions cannot stop triggered packet or guarantee to stop a connection techniques.
d. Response actions cannot stop malicious packets or cannot guarantee to stop any DOS attack
A. Rules are comprised of three criteria and an action.
B. By default, the schedule is set to office hours.
C. At least one rule applies to a web request.
D. In the evaluation of a rule set, the best match wins.
Answer A
How are HTTP requests handled by the Cisco WSA
a. A transparent request has a destination IP address of the configured proxy.
b. The URI for an implicit request doest not contain the DNS host.
c. An explict request has a destination IP address of the intended web server.
d. The URI for an explicit request contains the host with the protocol information.
Answer D
Which option describes what occurs with asymmetric routing when an IPS normalization engine is enable?
a. It allows the return packets back to the source path.
b. It must see a valud SYN/ACK before it lets a flow pass, otherwise the IPS normalization engine assumes that is is encountering a fragmentation attack, and it drops the retun packets
c. It must see a valid ACK/ACK before it lets a flow pass.
d. It must see a valid SYN/ACK before it lets a flow pass, otherwise the IPS normalization engine assumes that it is in encountering an evasion attack and drops the return packets.
Answer D
Which statement about the Cisco ASA CX role in inspecting SSL traffic is true?
a. To decrypt traffic, the Cisco ASA CX must accept the websites' certificates as Trusted Root CAs.
b. If the administrator elects to decrypt traffic, the Cisco ASA CX acts as a man-in—me-middle.
c. Either all traffic is decrypted, or no traffic is decrypted by the Cisco ASA CX.
d. The traffic is encrypted, so the Cisco ASA CX cannot determine the content of the traffic.
Answer B
When https traffic is scanned, which componet of the full URL does CWS log?
a. only path
b. only host Y
c. host and query
d. path and query
Answer B
Using the Cisco WSA GUI, where should an operator navigate to determine the running sotfware image on the Cisco WSA?
a. Systems Administration > Feature Keys
b. Systems Administration > System Upgrade
c. Admin > System info
d. Systems Administration > General
Answer B
Which step is required when you configure URL filtering to Cisco Cloud Web Security?
a. configure URL filtering policies in Cisco ScanCenter
b. install the ASA FirePOWER module on the Cisco ASA.
c. Implement Next Generation IPS instrusion rules.
d. Configure URL filtering criteria in the Cisco ASA FirePOWER access rules.
Answer A
12. Which action cloud reduce the security of the management interface of the Cisco ESA appliance?
a. Assing delegated administrator roles to engineers who manage the mail policies.
b. create a network access list to allow all connections to the management interface
c. Display a login banner indicating that all appliance use is logged and reviewed
d. configure a web UI session timeout of 30 minutes for connected users.
Answer A
13. A security engineer is configuring user identity for the Cisco ASA connector for Cisco CWS. How many AAA server groups must the engineer configure
a. 1
b. 3
c. 4
d. 2 yes
Answer D
which option represents the cisco event aggregation product?
a. CVSS system
b. IntelliShield
c. ASA CX Event Viewer
d. ASDM 7.5
No idea!!!!
Which statement about the default configuration of an IPS sensor's management security settings is true?
a. There is no login banner
b. The web server port is TCP 80
c. Telnet and SSH are enable
d. User accounts lock after three attempts
Answer A
Thank you!
18. An enginner manages a Cisco Intrusion Prevention System via IME. A new user must be able to tune signatures, but must not be able to create new users. Which role for the new user is correct?
a.viewer
b.service
c.operator
d.administrator
Respuesta: C correct?
Link: http://www.cisco.com/c/en/us/td/docs/security/ips/7-2/configuration/guide/ime/imeguide72.pdf
Which two pieces of information are required to implement transparent user identification using context Directory Agent? (Choose two)
a.the backup context Directory Agent
b.the shared secret
c.the server name where Context Directory Agent is installed
d.the server name of the global catalog domaint controller
e.the syslog server IP address
Respuesta b, C
27. Which settings are required when deploying Cisco IPS in high-availability mode using EtherChannel load balancy?
a.ECLB IPS appliances must be in on-a-stick mode, ECLB IPS solution maintains state if a sensor goes down, and TCP flow is forced through the same IPS appliance.
b.ECLB IPS appliances must not be in on-a-stick mode, ECLB IPS solution maintains state if a sensor goes down, and TCP flow is forced through the same IPS appliance flow
c.ECLB IPS appliances must be in on-a-stick mode, ECLB IPS solution does not maintain state if a sensor goes down, and TCP flow is ofrced through a different IPS appliance.
d.ECLB IPS appliances must not be in on-a-stick mode, ECLB IPS solution does not maintain state if a sensor goes down, and TCP flow is forced through a different IPS appliance.
28. Which Cisco technology secures the network through malware filtering, category-base control, and reputation-based control?
a.Cisco WSA
b.Cisco IPS
c.Cisco ASA 5500 series appliances
d.Cisco remote-access VPNs
30. Which option describes the role of the Learning Accept Mode for anomaly detection?
a.It creates a knowledge base of the network traffic
b.It detects ongoing attacks and adds them to a database.
c.It configures the anomaly detection zones.
d.It identifies incomplete connections and flags them.
33. Which description of an advantage of utilizing IPS virtual sensors is true?
a.Different configurations can be applied to different sets of traffic.
b.The persistent store is unlimited for the IPS virtual sensor.
c.The virtual sensor does not require 802.1q headers for inbound traffic.
d.Asymmetric traffic can be split between multiple virtual sensors
34. Elliptic curve cryptography is a stronger more efficient cryptography method meant to replace which current encryption technology?
a.3DES
b.RSA
c.DES
d.AES
35. Which action is possible when a signature is triggered on the Cisco IOS IPS?
a.Deny all packets with the same soruce address
b.Send an email via SMTP to the administrator
c.Deny all packets with the same port destination
d.Send an SNMP alert to a monitoring system
36. Which signature engine is responsible for ICMP inspection on Cisco IPS?
a.AIC Engine
b.Fixed Engine
c.Service Engine
d.Atomic IP Engine
A network security design engineer is considering using a Cisco Intrusion Detection System in the DMZ of the network. Which option is the drawback to using IDS in the DMZ as opposed to using Intrusion Prevention System?
a.Sensors, when placed in-line, can impact network functionality during sensor failure.
b.IDS has impact on the network (thatis, latency and jitter).
c.Response actions cannot stop triggered packet or guarantee to stop a connection techniques.
d.Response actions cannot stop malicious packets or cannot guarantee to stop any DOS attack.
6.
|---------------------------------------------------------------|
|r01 (config)
What is the default login and password of IPS IME GUI ?
The answer is: username cisco password cisco
please let me know
Do anyone knows if they updated this exam with new questios/Drag & Drop and stuff?
Thanks
and which dump has the labs?
Many new drag and drop questions
many new single and multiple choice questions
18. An enginner manages a Cisco Intrusion Prevention System via IME. A new user must be able to tune signatures, but must not be able to create new users. Which role for the new user is correct?
a.viewer
b.service
c.operator
d.administrator
Answer: C
Source: http://www.cisco.com/c/en/us/td/docs/security/ips/7-0/command/reference/cmdref/crIntro.html
Which two pieces of information are required to implement transparent user identification using context Directory Agent? (Choose two)
a.the backup context Directory Agent
b.the shared secret
c.the server name where Context Directory Agent is installed
d.the server name of the global catalog domaint controller
e.the syslog server IP address
Answers are: B and C
27. Which settings are required when deploying Cisco IPS in high-availability mode using EtherChannel load balancy?
a.ECLB IPS appliances must be in on-a-stick mode, ECLB IPS solution maintains state if a sensor goes down, and TCP flow is forced through the same IPS appliance.
b.ECLB IPS appliances must not be in on-a-stick mode, ECLB IPS solution maintains state if a sensor goes down, and TCP flow is forced through the same IPS appliance flow
c.ECLB IPS appliances must be in on-a-stick mode, ECLB IPS solution does not maintain state if a sensor goes down, and TCP flow is forced through a different IPS appliance.
d.ECLB IPS appliances must not be in on-a-stick mode, ECLB IPS solution does not maintain state if a sensor goes down, and TCP flow is forced through a different IPS appliance.
Answer is: C
Source: http://www.cisco.com/en/US/products/hw/vpndevc/ps4077/products_configuration_example09186a0080671a8d.shtml
28. Which Cisco technology secures the network through malware filtering, category-base control, and reputation-based control?
a.Cisco WSA
b.Cisco IPS
c.Cisco ASA 5500 series appliances
d.Cisco remote-access VPNs
Answer is: A
30. Which option describes the role of the Learning Accept Mode for anomaly detection?
a.It creates a knowledge base of the network traffic
b.It detects ongoing attacks and adds them to a database.
c.It configures the anomaly detection zones.
d.It identifies incomplete connections and flags them.
Answer is: A
Source: http://www.cisco.com/c/en/us/td/docs/security/security_management/cisco_security_manager/security_manager/4-0/user/guide/CSMUserGuide_wrapper/ipsanom.html
33. Which description of an advantage of utilizing IPS virtual sensors is true?
a.Different configurations can be applied to different sets of traffic.
b.The persistent store is unlimited for the IPS virtual sensor.
c.The virtual sensor does not require 802.1q headers for inbound traffic.
d.Asymmetric traffic can be split between multiple virtual sensors
Answer is: A
Source : http://www.cisco.com/c/en/us/td/docs/security/ips/7-0/configuration/guide/cli/cliguide7/cli_virtual_sensors.pdf
34. Elliptic curve cryptography is a stronger more efficient cryptography method meant to replace which current encryption technology?
a.3DES
b.RSA
c.DES
d.AES
Answer is: B
35. Which action is possible when a signature is triggered on the Cisco IOS IPS?
a.Deny all packets with the same source address
b.Send an email via SMTP to the administrator
c.Deny all packets with the same port destination
d.Send an SNMP alert to a monitoring system
Answer: A (but you should confirm)
36. Which signature engine is responsible for ICMP inspection on Cisco IPS?
a.AIC Engine
b.Fixed Engine
c.Service Engine
d.Atomic IP Engine
Anwer is: D
A network security design engineer is considering using a Cisco Intrusion Detection System in the DMZ of the network. Which option is the drawback to using IDS in the DMZ as opposed to using Intrusion Prevention System?
a.Sensors, when placed in-line, can impact network functionality during sensor failure.
b.IDS has impact on the network (thatis, latency and jitter).
c.Response actions cannot stop triggered packet or guarantee to stop a connection techniques.
d.Response actions cannot stop malicious packets or cannot guarantee to stop any DOS attack.
Answer is: C
When the new dumps will be available ?
There are three Labs I have found in 196q dump - Q 75/191/192 -- Are these showing up or should we just ignore them?
I am ready with rest of the stuff. Thanks Amis and Amigos.
When will be here an update? The exams have to actualised
A-ESA message tracking
B-PRSM events
C-AV statistics
D-Cisco CWS activity
Answer: D
Question-2: On which plateforms can you run CWS connector? (choose two)
A-Cisco ASA Firewall
B-Cisco IPS module
C-Standalone deployment
D-Cisco ISR router
E-Cisco Firepower NGIPS
Answer: A and D
Question-3: Refer to the exhibit Which description of the result of this configuration is true?
Router(config)#line vty 5 15
Router(config-line)#access-class 23 in
A-Only clients denied in access list 23 can manage the router.
B-Only telnet access (TCP) is allowed on the VTY lines of this router
C-Only clients permitted in access list 23 can manage the router
D-Only SSH access (TCP 23) is allowed on the VTY lines of this router.
Answer: C
Question-4: What does the anomaly detection Cisco IOS IPS component detection ?
A-ARP Spoofing
B-Worm-infected hosts
C-Signature changes
D-Network Congestion
Answer: B (I think)
Question-5: Refer to the exhibit . The security engineer has configured cisco cloud web security redirection on a cisco ASA firewall. Which statement describes what can be determined from exhibit?
authUserName: LAB\user1
authenticated: true
companyName: Companyl
countryCode: US
externalIP: 209.165.200.241
groupNames:
- Test Lab
- "LAB://testgroup'l
logicalTowerNumber: 197
staticGroupNames:
- Test Lab
- "LAB://testgroup'l
userName: userl
A-In case of issues, the next step should be to perform debugging on the cisco ASA.
B-The URL visited by the user was LAB://testgroup.
C-This out has been obtained by browsing to whoami.scansafe.net
D-The IP address of the Scansafe tower is 209.165.200.241
Answer: C
Question-6: Refer to the exhibit. How is the “cisco” password stored?
Router (config) #username admin secret cisco
Router (config) #no service password-encryption
a. As MD5 hash
b. As Type 0
c. As Type 7
d. As Clear Text
Answer: A
Question-7: Refer to the exhibit. What type of password is “cisco”?
Router(config)#service password-encryption
Router(config)#username admin password cisco
a. Enhanced
b. CHAP
c. Type 7
d. Type 0
Answer: C
Question-8: Which Option of SNMPv3 ensure authentication but no encryption?
Correct answer: Auth
Question-9: Which commands are required to configure SSH on router? (Choose two)
Correct answers are:
1-configure domain name using ip domain-name command
2-generate a key using crypto key generate rsa
There are couple of a new drag&drop questions, and ca. 80% of new questions.LABs are the same (one with ESA, and one with IPS).
When can we expect new accurate dumps? How much time it usually takes for updating dumps with new questions?
I have to show up for my exam anyway, there is no other way now or option to cancel the exam for tomorrow.
I will keep you updated about what I can remember from the new questions.
Thank you very much for the update about the exam and sorry to hear that you did not make it. It looks like 30% of questions are new. Do you remember any new questions or possible choices? Anything at all?
Do you think it will ever be a dump ready for this version?
Thanks!
Good luck ;)
And I am looking for exam question of 300-206, 300-208, 300-209. Thanks.
when you say dump is invalid be specific whether its file you are referring to.
3. How are HTTP requests handled by the Cisco WSA
a. A transparent request has a destination IP address of the configured proxy.
b. The URI for an implicit request doest not contain the DNS host.
c. An explict request has a destination IP address of the intended web server.
d. The URI for an explicit request contains the host with the protocol information.
4. Which option describes what occurs with asymmetric routing when an IPS normalization engine is enable?
a. It allows the return packets back to the source path.
b. It must see a valud SYN/ACK before it lets a flow pass, otherwise the IPS normalization engine assumes that is is encountering a fragmentation attack, and it drops the retun packets
c. It must see a valid ACK/ACK before it lets a flow pass.
d. It must see a valid SYN/ACK before it lets a flow pass, otherwise the IPS normalization engine assumes that it is in encountering an evasion attack and drops the return packets.
7.Which statement about the Cisco ASA CX role in inspecting SSL traffic is true?
a. To decrypt traffic, the Cisco ASA CX must accept the websites' certificates as Trusted Root CAs.
b. If the administrator elects to decrypt traffic, the Cisco ASA CX acts as a man-in—me-middle.
c. Either all traffic is decrypted, or no traffic is decrypted by the Cisco ASA CX.
d. The traffic is encrypted, so the Cisco ASA CX cannot determine the content of the traffic.
8. When https traffic is scanned, which componet of the full URL does CWS log?
a. only path
b. only host
c. host and query
d. path and query
10. Using the Cisco WSA GUI, where should an operator navigate to determine the running sotfware image on the Cisco WSA?
a. Systems Administration > Feature Keys
b. Systems Administration > System Upgrade
c. Admin > System info
d. Systems Administration > General
11. Which step is required when you configure URL filtering to Cisco Cloud Web Security?
a. configure URL filtering policies in Cisco ScanCenter
b. install the ASA FirePOWER module on the Cisco ASA.
c. Implement Next Generation IPS instrusion rules.
d. Configure URL filtering criteria in the Cisco ASA FirePOWER access rules.
12. Which action cloud reduce the security onf the management interface of the Cisco ESA appliance?
a. Assing delegated administrator roles to engineers who manage the mail policies.
b. create a network access list to allow all connections to the management interface
c. Display a login banner indicating that all appliance use is logged and reviewed
d. configure a web UI session timeout of 30 minutes for connected users.
13. A security engineer is configuring user identity for the Cisco ASA connector for Cisco CWS. How many AAA server groups must the engineer configure
a. 1
b. 3
c. 4
d. 2
15. which option represents the cisco event aggregation product?
a. CVSS system
b. IntelliShield
c. ASA CX Event Viewer
d. ASDM 7.5
16. Which statement about the default configuration of an IPS sensor's management security settings is true?
a. There is no login banner
b. The web server port is TCP 80
c. Telnet and SSH are enable
d. User accounts lock after three attempts
Buddy, you are beyond awesome!! While others just ask questions, you deliver. Hats off to your good work.
How many drag and drops and new questions (not covered in 196 dump) did you encounter in your exam?
And once again, thanks a million for your help.
Need to configure command under parameter- map "source interface fe0/1". Proxy will come up.
Good luck
does anyone know what other 2 questions are like? The 4 drag drop questions are pretty much sure to be in exam so if we can get them right we can for sure ace the exam.
I have heard there are at least 5 D&Drop Questions and a few encryption questions, the IDM Question, Questions 100,189,190 and 193 from the 300-210, 196 Questions are the same, hope the updated one is out soon, hope this helps
score
Good Luck and thanks again for having this side it really helps a lot
CWS lab
interface f0/1
content-scan out
1. IDM sensor related Simulation MCQs
Which two statements about the Cisco IPS appliance configurations are true? (Choose three.)
A. The maximum number of denied attackers is set to 10000.(correct)
B. The block actionduraton is set to 3600 seconds.(its 60s and Deny Action Duration is 3600 - incorrect)
C. The Meta Event Generator is globally enabled.(correct)
D. Events Summarization is globally disabled.
E. Threat Rating Adjustment is globally disabled
2. ASA CX software module in ASA Lab(fail-close)
3. Configuring CWS Connector on ISR-G2 Lab(parameter-map)
After config, the primary and secondary proxy dows not come up.
so in parameter-map, enter the command:
"source interface FE0/1"
and it will go up.
4. Email Security Virtual Appliance Simulation
Please let me know if anyone need help.
Can someone tell me the answer for questions 194,195 and 196 ? I have a problem with ETE Player when i press the "answer" button for the last questions.
for cx module management 0/0 ip address is 192.168.1.2
ips traffic switch issue correct answer is trunk not access
no cli simulation with parameter-map
don't forget line source interface as is missing from dump
btw pass
Thanks!
How many labs on the exam?
Which dumps did you find these questions from? I can try to find answers but please share more info about the questions' source first. No point in wasting time on something that is not appearing in exam?
Thank you
[email protected]
There were IPS lab and the ESA lab, IPS terminlogy/NGFW security context config/IntelliSHield components drag and drop questions.
there were some very easy questions about SSH config and ACL for management access on router service password encryption command effect on passwords which is like CCNA level....
If people can share what they remember here would be nice.
passed today
put 0 xxxx at the front of licence key
do not forget source int fa 0/1
196 Q valid.. all exact
ASA to CX module config
IOS to CWS config --> dont forget the source interface fa0/1 command
Practiced nuggets and INE videos
Read the
Next on -- CCIE
thanks all
Score received: 846 :)
Read this and you'll pass:
Labs:
CWS via ISR G2
parameter-map type content-scan global
server scansafe primary name proxy-a.scansafe.net port http 8080 https 8080
server secondary............
server content-scan on-failure block-all
license..............
int fa0/1
no shut
content-scan out
sh content-scan sess active
sh content-scan stat
sh content-scan sum
copy run start
CXSC Lab (Redirection from ASA to CXSC Module):
policy-map inside-policy
class class-default
cxsc fail-close authentication-proxy
exit
service-policy inside-policy int inside
exit
sh service-policy cxsc
copy run start
ESA Question lab:
Which domain can send 5000 max messages:
orange.public (This has a rep score of -4 but is whitelisted)
How much mail per hour will green.public be able to send? 20 (suspect list bc of rep score aka throttled mail flow policy)
What domain color.pub (forgot color) will send how much mail (10MB is default for accept mail flow)
Which domain will be rejected when sending mail? Red domain (orange is whitelisted)
IPS question lab:
reputation filtering is off
max denied attackers: 10000
Meta event generator: globally enabled (these two can be viewed by general tab under sig policy 0)
Sig 11004: High and produce alert
Questions I remember:
whoami.scansafe.net (view group connections in CWS)
WPAD- Download script
Bridged interfaces in IPS: inline vlan pair
Data center with IPS question: Inline vlan pair and ECLB
AVC question- Deep packet inspection
IPS question on interface capacity is limited: Inline vlan group mode
Native vlan question: Default native vlan variable per interface of IPS
Image question of WSA: Sys Admin>Sys Upgrade
And then about 25 questions are the same from dump. Good luck.
I will take the exam tomorrow :(
Best Of Luck
I can't find dumbs 196Q . Did JOHAN 271Q is same ??
Thanks
Note If the paired interfaces are connected to the same switch, you should configure them on the switch as access ports with different access VLANs for the two ports. Otherwise, traffic does not flow through the inline interface.
Taken from http://www.cisco.com/c/en/us/td/docs/security/ips/5-1/configuration/guide/cli/cliguide.pdf
Thanks
[email protected]
Can you please send me the updated 196 Q file?
I have 100% valid 300-208 materials used 3 days ago.
Thanks a lot!
[email protected]
Just finished studying and would like to test myself please.
my email is [email protected]
passed 980
All question are from 196Q
total 55q
got 2 lab all cli asa cx redirection
ISR connector - with scansafe
all new set of questions
add
ips vlan pair config but switch cannot pas traffic, how to set interface on switch
access
trunk
....
....
WPAD
discovery file
discovery and download
....
....
score 825 passing is 846
Thanks
dump is 100 percent valid.
1-configuring CWS connnector on isr-g2
do not forgot to set
source interface f0/1 under
parameter-map.
2-create policy map name inside-policy
3- IDM lab
all question from dump dum
Be-careful from this question!
Which three statements about the Cisco IPS appliance configurations are true? (Choose three.)
A. The maximum number of denied attackers is set to 10000.
B. The block action duraton is set to 3600 seconds.
C. The Meta Event Generator is globally enabled.
D. Events Summarization is globally disabled.
E. Threat Rating Adjustment is globally disabled
Also, for one of the simulation in the actual exam, the "cxsc on-failure block-all" command didn't seem to work.
Good Luck.
Is the dump ETE still valid or not?
Only 1 remark:
In the simulation where the Fa0/1 needs to be enabled, the "no shutdown" command doesn't work. Neither the "copy run start".
For those two reasons, it is impossible to activate the content-scan configuration. So, the "show" commands don't show the configuration active.
I believe it is a failure of the Exam setup, so my recommendation is that you don't waste your time trying to solve that problem, we cannot do nothing.
Good luck !!
why is none ?
why we didn't use SBRS (Sender Base)
Can you please send me the updated 196 Q file?
I have 100% valid 300-208 materials used 3 days ago.
Thanks a lot!
[email protected]
I have read 161q, Do I need read 271q?
Please give me advice.
Thanks!
Could someone share with me a valid exam questions for Cisco 300-210 & 300-209 with a valid ETE Simulator for windows?
appreciate if you could send it to me on [email protected].
Many Thanks in advance
It's more important because I'm going to take exam this weekend :(.
I Passed the exam, question # 73 of the IPS Scenario has to be checked =, it let's you choose 2 answers while the answered questions are 3!!
Be-careful from this questions!
Which three statements about the Cisco IPS appliance configurations are true? (Choose three.)
A. The maximum number of denied attackers is set to 10000.
B. The block actionduraton is set to 3600 seconds.
C. The Meta Event Generator is globally enabled.
D. Events Summarization is globally disabled.
E. Threat Rating Adjustment is globally disabled
In the exam you will be allowed to choose 2 answers only, so check the setting properly from the IPS device.
Best luck all.
Ronaldo
10/8/2017
please who has down Exam to confirm
60% questions are diffrent and all the labs are diffrent...
Please could anyone advise on the latest dumb for 300-210 - i have exam scheduled for the 4th of Jan and would greatly appreciate feedback - you could drop here: [email protected] - thank you kindly!
Just 2 Update and you can achieve 1000/1000
1. IDM sensor related Simulation MCQs
Which two statements about the Cisco IPS appliance configurations are true? (Choose three.)
A. The maximum number of denied attackers is set to 10000.(correct)
B. The block actionduraton is set to 3600 seconds.(its 60s and Deny Action Duration is 3600 - incorrect)
C. The Meta Event Generator is globally enabled.(correct)
D. Events Summarization is globally disabled.
E. Threat Rating Adjustment is globally disabled
2. Configuring CWS Connector on ISR-G2 Lab(parameter-map)
In the simulation where the Fa0/1 needs to be enabled, the "no shutdown" command doesn't work and interface won't goes up
After config, the primary and secondary proxy does not come up.
so in parameter-map, enter the command:
"source interface FE0/1"
and it will go up.
Save the Simulations with "copy run start", its working.
All the Best
1) Configure IOS to redirect traffic to CWS - given license , etc
2) Redirect traffic in ASA to ASA-CX (class default). You must do it using CLI.
Give me your email or add my email [email protected], I have a question about experience in this exams.
If you learn carefully, I think you should pass this exam . . .
Some question I remember:
- Show scansafe (summary, statitics, session)
- Tools to manage IPS (Cisco IDM)
You should read Hybyd ESA.
any one confirm about it i want to take exam
if anybody take exam please tell me about dump
Some of the questions I remember;
ssh enabled by default on ESA, data1 data2 mgmt1 or not enabled by default
The benefit of a company using hybrid ESA - advanced outbound control and onsite dlp
Difference between Appliance and Virtual ESA -
A user receives an encrypted message from ESA, how is the key retrieved - registered envelope service
What location can you find the version of AsyncOS (ESA Software) running on the Ironport? - Software upgrade
What options can be used to search in message tracking - envlope sender, envlope receipnt, message id, sender ip/domain/owner
What port is used for ESA cluster communication - TCP/22
What is the default username and password for cisco esa - admin/ironport
what methods can be used to deplyo a Cisco WSA transparently? - pbr, wccp
A cisco IPS has been configured using inline vlan pair, how should the switch interfaces be configured (trunk)
What can occur when a Cisco IPS is configured in promiscious mode vs inline pair mode - cannot stop malicious traffic (another answer required but no other answers are correct)
What functionality does web proxy authentication protocol provide? - download proxy auto-config script via DHCP or DNS
### SIMULATIONS ###
New simulation requires you to configure fail-close cxsc policy-map and attach it to the inside interface via CLI.
New simulation requires you to configure scansafe on ISR using proxy-a.scansafe.net, proxy-b.scansafe.net, license key provided and attach it to egress interface FastEthernet0/1 (Note that this simulation cannot be verified as both interfaces on the router show down/down)
New Simlet with 4 questions asking you to identify reputation based email policies using domains red.public, orange.public, green.public, blue.public and violet.public. Q1 - Which color.public can send email to 50,000 recipients, Q2 - what is the maximum size email that green.public can send (10mb) Q3 - How many emails can orange.public send per hour, Q4 - Which domain name will block all received emails (red.public and orange.public)
Old Simulation on the Cisco IPS with 3 questions (Q1 - info on Signature 1004, Q2, reputation, Q3, max drops and timer - 10,000/3600)
3 simulators 51 questions
can you please provide me valid dump please
Thanks
196Q is 100% valid.
All Q are from 196q only.
all d best
I am glad to share those new 300-210 exam questions, please leave your e-mail.
Good Luck, All Guys!
Labs accurate.
Good luck
Test questions were from this only at 50%.
I got 825 point, while passing score is 846 :(((( (Of course I learned lot, but for such a crazy questions which Cisco used to asks, without dump you has poor chance :( )
Questions I remember and new :
- What is the difference between Physical and Virtual WSA.
- - What is the difference between Physical and Virtual ESA.
- What is the difference between ESA and Hybrid ESA.
- What is Hybrid ESA benefit ?
- How WPAD (Web Proxy Auto-Detection) works ?
- What are the technical solutions for WSA transparent installation ? (WCCP,PBR, L4 & L7 switch ?)
LAB :
- Configure ASA for CWS : Proxy name, license and Interface for policy-map (inside-out) given.
- ESA : Based on HAT table and Mail-Policy and Reputation for 5 example domain ( red.public,orange.public,etc) decide :
- which domain can send email to 50.000 recipients (Whitlist - but no domain was at here, so pass..)
- Which domain mails will be rejected (Blacklist : WBRS : -3 - -10)
- color.public can send which size of email ( Trusted mail policy - 10Mbyte)
- color2.public can send how mail mails per hour (Suspect list - 20 mail/hour)
- Same lab with IPS like dump : Sig 1104 props, reputation is off,10000 drops max for 3600 sec.
I hope someone will post a new dump at next 1 month and also hope that meantime 300-206 will be still actual, and they not change just before I go for that :)
Good luck !
why all ansers on this q is acces , i think the right answer is trunk .. any one has another idea
congratulations
could you please send me the new questions to me for 300-210
my email is [email protected]
i am waiting
thanks alot
196q is valid 100%
Can someone verify if the 161q dump is still good? Thanks!
Good Luck !