Log into your Prepaway Account
Please Log In to download ETE file or view Training Course
Registration is free and easy - just provide your E-mail address.
Click Here to Register
Exam: | 210-260 - CCNA Security Implementing Cisco Network Security |
Size: | 6.68 MB |
Posted: | Saturday, September 9, 2017 |
Download:
|
Cisco.Passguide.210-260.v2017-09-09.by.juan.138q.ete |
Download Free 210-260 Exam Questions |
Log in to make your opinion count.
Registration is free and easy - just provide your E-mail address.
Click Here to Register
Use Discount Code:
A confirmation link was sent to your e-mail.
Please check your mailbox for a message from [email protected] and follow the directions.
with https://www.youtube.com/watch?v=kyolMpIofOY labs.
For lab question “For which class map is used by the INBOUND rule” look under
CONFIGURE -> ROUTER -> ACL -> Firewall Rule (There you see the INBOUND Rule)
you can read here more about it:
http://www.securitytut.com/ccna-security-210-260/share-your-ccna-security-experience
Lab : NTP + ACL using CCP.
Hotspot : Same questions but Options are different.
Answers in different order. So memorize the answers not option code.
All the best for everyone going to give the exam.
Egypt
score 9xx
still valid
Not the exact date but an estimate, because if it is too long i might focus on other exams.
936/1000
thanks for every one and al hamdulillah
egypt
All I know about new exam:
You need to get 898/1000 points to pass
New questions:
- NTP + ACL and CCP HostSpot remain equal
- What’s the accces-list purpose in an VPN site-to-site config? (traffic to be encrypted, traffic to be allowed, etc..)
- There was a question showing two complete vpn site-to-site configs (one config per peer) and you have to guess what’s wrong and how to solve it.
- Lot of questions regarding CCP screens, such as what CCP screen would you use to configure a new security policy?. What CCP screen would you use to add a new AAA server? and so on..
- Radius and Tacacs+ drag and drops have been moved to multiple choice questions. One of them ask for what are the Radius properties (it uses UDP, encrypts the password only and is a standard protocol) and there’s another one asking for TACACS+ properties ( uses TCP, encrypts the entire packet and is cisco property).
- protocol numbers for ESP & AH
- question on Private VLAN- what it is
- IPV6 access-list features
- Purpose of ACL in IPsec
- how to protect CAM table overflow question
- What is used for controlling access to cisco appliances(NAS, AAA, RADIUS,TACACS+) as options.
Probably a lot more new questions than that.
Anybody write exam on today & dump is still valid
How many Sims are in this Exam?
what is the correct answer plz?.
U can install ccp in ur laptop & practice. Or memorize the steps
hey
question :
1/ are all CCP HOTSPOT questions the same ?
and
2/ Are all CCP HotSpot question the same Answer ???
I mean, CCP hotspot answer doesn't change from an exam to another ? it's exactly the same than on dump ?
thanks again
You need to get 898/1000 points to pass
New questions:
- NTP + ACL and CCP HostSpot remain equal
- What’s the accces-list purpose in an VPN site-to-site config? (traffic to be encrypted, traffic to be allowed, etc..)
- There was a question showing two complete vpn site-to-site configs (one config per peer) and you have to guess what’s wrong and how to solve it.
- Lot of questions regarding CCP screens, such as what CCP screen would you use to configure a new security policy?. What CCP screen would you use to add a new AAA server? and so on..
- Radius and Tacacs+ drag and drops have been moved to multiple choice questions. One of them ask for what are the Radius properties (it uses UDP, encrypts the password only and is a standard protocol) and there’s another one asking for TACACS+ properties ( uses TCP, encrypts the entire packet and is cisco property).
- protocol numbers for ESP & AH
- question on Private VLAN- what it is
- IPV6 access-list features
- Purpose of ACL in IPsec
- how to protect CAM table overflow question
- What is used for controlling access to cisco appliances(NAS, AAA, RADIUS,TACACS+) as options.
Probably a lot more new questions than that.
My exam is tomorrow... wish me luck
Also got problem with hotspot...
it seems like there is one new question for me about aaa...
ALCON, just FYI-P4S Their updated braindump. There are now 187 questions in the pool.Please any one can Provide the valid dump
70Qs, pass score 804, two labs CCP, no news questions
move to CCNP now !:-)
thx guys for dump
NTP and CCP labs
in USA 3/11/14
do you remember some of the new questions ?
I have the exam tomorrow.
Thanks in advance
Make sure you know ALL Q's and answers.
67 Q's, 5 D&D, and 1 testlet.
you can read here more about it:
http://www.securitytut.com/ccna-security-210-260/share-your-ccna-security-experience
I used , CBT nuggets , Udemy (for those who needs password to open the rar's file it is : nice , when you unrar the rar file , you got a second rar file to unrar with the same password ...I hope this help someone ...). I used also ProfSim for lab simulation (they don't have CCP but SDM :( , I just used the trial version , may be I will buy it for the next certification preparation like ccnp , ceh ...).. I can't forget Prepaway !!!! Thanky to all , See you guys ...
61 questions and totally changed , someone with new questions
New questions:
- NTP + ACL and CCP HostSpot remain equal
- What’s the accces-list purpose in an VPN site-to-site config? (traffic to be encrypted, traffic to be allowed, etc..)
- There was a question showing two complete vpn site-to-site configs (one config per peer) and you have to guess what’s wrong and how to solve it.
- Lot of questions regarding CCP screens, such as what CCP screen would you use to configure a new security policy?. What CCP screen would you use to add a new AAA server? and so on..
- Radius and Tacacs+ drag and drops have been moved to multiple choice questions. One of them ask for what are the Radius properties (it uses UDP, encrypts the password only and is a standard protocol) and there’s another one asking for TACACS+ properties ( uses TCP, encrypts the entire packet and is cisco property).
- protocol numbers for ESP & AH
- question on Private VLAN- what it is
- IPV6 access-list features
- Purpose of ACL in IPsec
- how to protect CAM table overflow question
- What is used for controlling access to cisco appliances(NAS, AAA, RADIUS,TACACS+) as options.
Probably a lot more new questions than that.
Passed the exam yesterday,,This dump is 100% valid
http://www.sendspace.com/file/6at7yg
Check this YouTube video it explains how to do the ACL+NTP lab clearly.
http://www.youtube.com/watch?v=kyolMpIofOY
cisco released the new CCNP sec books ???
Valid 100%
11:00 GMT 1-Mar-14
thank you all next stop CCNP route
and elhamdulilah
from Egypt
So you can find Labs from youtube for this exam
download latest dumps for 210-260, 187 questions.
http://www.sendspace.com/file/6at7yg
remember in prayers.
Egypt
still valid ...
958 marks
Thanks
iins.academy.centriumtech.com
70 questions. Too many D&D (at least 10).
Options from questions are rotated in the real exam.
I had problems with LABs.
In first lab after answering Question 4 and accessing Question 5 I was not able to browse into CCP (just got stacked on the output of the previous question and not able to display anything from the CCP menu).
In second Lab after configuring NTP and ACLs statements in CCP, after associating into the interface I was unable to click OK. Another error in the exam.
Too many short questions, but clear and understandable.
Stay close to the provided questions and explanations and understand differences between terms provided.
Best luck to all.
Log off CCNA Security.
Going toward New CCNP Security exams.
New CCNP Security ROCKS !!!!!
dump still valid but take care there is some changes in simulation.
Labs are: NTP+ACL & CCP hotspot (5 questions)
Passed with 958/1000
61 Questions.
898 Pass score.
Dump is no more valid.
Only about 10 questions came from it all other new questions can be found on securitytut.
What is the best way to practise sims
I recommend you to study well coz you can't use dump in real world.
did you get the lab sim question which has CISCO password ?
what should I do there ? just start from writing the enable command or at first use show run and then ....
thank you
Be careful ! The answer is wrong !
I took the exam today(08-11-2017) All questions came from here.
BTW. Does someone use CCP in real life :) ?
IMHO it's a complete piece of junk SW what I've ever seen! It was huge paint to install and get it to work, also it's hangs continuously...
- Protocols from Cisco CLASS-MAP inspection:
CONFIGURE -> SECURITY -> FIREWALL ->EDIT FIREWALL POLICY -> Select and edit SERVICE (= Class Map)
or CONFIGURE -> SECURITY -> C3PL -> CLASS MAP -> INSPECTION -> select cleass map
- ZBF: Zone-pair <-> assigned policies
CONFIGURE -> SECURITY -> FIREWALL -> FIREWALL COMPONENTS -> ZONE PAIRS -> Select zone pair (tab POLICY)
- NETWORK OBJECTS
CONFIGURE -> ROUTER -> ACL -> OBJECT GROUPS -> NETWORK OBJECT GROUPS
- ACL/NAT
CONFIGURE -> ROUTER -> ACL -> NAT Rules (down is ACTION for selected ACL)
- CLASS-MAP
CONFIGURE -> SECURITY -> FIREWALL -> FIREWALL -> EDIT FIREWALL POLICY -> Select and edit SERVICE (= Class Map)
- Which CLASS-MAP is used by the INBOUND Rule?
CONFIGURE -> ROUTER -> ACL -> Firewall Rule (There you see the INBOUND Rule)
Does someone can share this folder on dropbox with me? This folder containing 85 videos. Thank you very much in advance. my email is [email protected]
What are the recent SIMs
where can I download NTP and ACL simulation?
[email protected]
Just 10 questions from this
Pls wait for the new ones
I did the exam today and the exam questions are totally different
access-list 100 permit tcp 172.26.26.16 0.0.0.7 host 192.168.1.2 eq 80
access-list 100 deny tcp any host 192.168.1.2 eq telnet
access-list 100 deny tcp any host 192.168.1.2 eq www
access-list 100 permit ip any any
Which traffic is permitted by this ACL
A. TCP traffic sourced from any host in the 172.26.26.8/29 subnet on any port to host 192.168.1.2 port 80 or 443
B. TCP traffic sourced from host 172.26.26.21 on port 80 or 443 to host 192.168.1.2 on any port
C. Any TCP traffic sourced from host 172.26.26.30 destined to host 192.168.1.1
D. Any TCP traffic sourced from host1 172.26.26.20 to host 192.168.1.2
On the Dump it say the answer is D but how is that as the ACE (access-list 100 deny tcp any host 192.168.1.2) denies TCP traffic from ANY going to host 192.168.1.2 eq to telnet and http
shouldnt it the answer be C. as the source host 172.26.26.30 is not in the 172.26.26.16/29 subnet and 192.168.1.1 is not called upon in the ACL.
where can I download NTP and ACL simulation
A.
syslog
B.
SDEE
C.
FTP
D.
TFTP
E.
SSH
F.
HTTPS
??
RE: mouna - india
you can pass the exam without practicing CCP, but my advice is to go through at least once. It is very easy to setup using GNS3 & Oracle Virtual Box. Google it and you will find many articles.
Thanks
please let me know where can I download NTP and ACL simulation
Regards,
Dump valid, but CCP Hotspot changed.
Good luck!
iins.academy.centriumtech.com
Explained and labs also.
I'm From Libya
These Dumps are 100% valid , passed with 914/1000 Good Luck!
Total : 70 Questions Passing is : Above 804 Time : 120 Minutes
Following Dumps Are Valid
Please not only the sequence of the answers are changed in real Exam,meaning option A might be C etc.Only one different question was in the Exam regarding IPS True Negative,False Negative,True Position Etc.Otherwise,everything else is same from the above dumps
Thanks
how many drag and drops are in the exam?
thanx.
I'm currently studying ccna security and working to complete all my labs. I have a cisco 1841 router using ios 12.4(1)a. I'm looking for 12.4(20)T image. If you have one or know where to get one please let me know. Thanks in advance for your help.
can any help me to get link of the lab ntp.acl
can anyone tel how many labs are there in this exam? and what are they
http://www.youtube.com/watch?v=W_gjbgaHvuw&feature=youtu.be
Hello ..
Before the implementation of the fourth step .. Be sure to input and output (Interface)
Please write your comments
GOOD LUCK
Best Regards,
I'm currently studying ccna security and working to complete all my labs. I have a cisco 1841 router using ios 12.4(1)a. I'm looking for 12.4(20)T image. If you have one or know where to get one please let me know. my email is [email protected]. Thanks in advance for your help.
for a Lab which we have to enter cisco as a password, what should I do ? just write show run command and then type password, finally enter the configure terminal and so on ?
thank you
How can i answer the lab of (NTP) as GUI in real exam ?? and is it the same for (Hotspot) lab or not ?
In other hand please confirm if these labs are still valid or not (Site-to-site VPN SDM Lab Sim , Port Security Lab Sim & Zone-based Firewall SDM Simlet) ??
your support is highly appreciated and i will wait for your valuable feedback ...
I paased 210-260 exam on monday and scored 969 .
I have studied dump and books too however the book i am unable complete all the topics.Please study dumps for objective questions
i got 70 questions
out of that two simulations .the simulations question same however the answer is different please read check the answer name by realtime navigate it .
for NTP configs lab there is no deliver configs pop up window i have only configured on the CCP and unable to push configs to ROUTER i am unsure because of that i got 969 .
Any who can verify what kind of CLI configuration there is at this cert. ?
i think it's wierd that it's only CCP ?
LAB is NTP+ACL
What does level 5 in this enable secret global configuration mode command indicate?
A.router#enable secret level 5 password
B.The enable secret password is hashed using MD5.
C.The enable secret password is hashed using SHA.
D.The enable secret password is encrypted using Cisco proprietary level 5 encryption.
E.Set the enable secret command to privilege level 5.
F.The enable secret password is for accessing exec privilege level 5.
Need your help in getting valid data...kindly look into ur score card and please share total mark score as well as minimum passing score for exam !!!!!
Need data guys....Thanks in advance
Thanks!!!!!!!!!!!!!
Can someone please tell what are the labs available in the real exam ?
Is there any lab on Site-to-site VPN ??
Simulation labs in dump in the exam.
Thanks
Things to watch out.
1)the order of Q are not same.so practice.
2)NTP lab and ACl are the same.
All the best
Today i took this test, and i followed dump and this is 100% valid dump.
I would suggest first of all study well clear your concepts and then finally use dump as your brush up tool instead of preparation tool.
[email protected] is my mail id, please let me know if i can help you any way.
Thanks!
what are the passing score of 210-260 exam and can anyone provide me the exact detailed step on how to do the NTP/ACL access list simulation.
Thanks
Rockmss
Thanks Prepaway.
There was one additional question... inface the terminology is changed in the question..
I received 2 same questions on drag and drop regarding False negative, False Positive, True negative and True Positive.... Only difference is terminology is changed..that's it.
LAB is NTP+ACL
A. syslog
B. SDEE
C. FTP
D. TFTP
E. SSH
F. HTTPS
what is the correct answer AB or BF.
plz help
i need your help guys
Thank you.
All questions from dump, again study and understand is important.
Thanks a lot
2 new drag and drop questions.
thank you (Montreal canada)
Navigate through all the links in CCP Lab hotspot. Navigation mentioned in this may not be same but you will find the answers to it.
I've faced some problems.such as
* NTP lab simulation: No delivery option
* In hotspot:
-- Window is too slow to show 2 HOSTs in ACL.there was no way to wide that screen.its kind of locked.
-- Class map inbound ques: ans portion was locked.so i had to guess the ans.
My sugg: Do not memorize.read carefully.and if u can check misha 116 dumps too.
Good Luck guyz.
Thank you!
deliver window in ccp may be not appear with you it's normal don't worry
for any help https://www.facebook.com/koko.networkgeek
yes, when I click on "Show Answer" there is something like a reference, for example "8.3.2 IPsec Security Protocols". It's like a paragraph in some book where is explanation of the answer, but I don't know which book that is.
This dump is valid (except for the false positive question).
Answers are shuffled.
Thanks.....
I am unable to download dump from this website
Anybody having dump kindly mail me at
[email protected]
Passed the exams 15 mins ago.
Please do the hotspot qustions carefully.
Thanks to Noam and best of luck to all of you.
How many labs are there on exams?
guys if i passed this exam will my CCNA Routing and Switching be renewed
Used dump and CBT Security training video. Download the CCP and run
it in demo mode to practice the CCP portion of the test.
I had several drag and drops and the CCP simulation to configure NTP, ACL rules. I was expecting more CCP simulations.
one new question on IOS ACL. Understand IOS ACLs and you can figure it out.
i can't remember the exact wording of the question but something like this:
what traffic is allowed for ACL below
permit tcp 10.0.0.32 0.0.0.0.31 eq 23
permit tcp 10.0.0.32 0.0.0.0.31 eq 80
deny ip 10.0.0.32 0.0.0.21 any
permit any any
In the NTP lab, does the search function work in CCP? What I speak of is above the pane with Interface Management, Router Security and unified communications. I am using the Demo to practice, and the ability to use that would make the lab much easier.
what is a Hitspot lab sim?
@ my email : [email protected]
Thanks and highly regards...
Help -> Check for update
any site or forum like securitytut.com
Can anyone provide me the exact detailed step on how to do the NTP/ACL access list simulation.
Thanks
Thomas
signature/alarm fired - true
signature not fired/alarm - false
offending/malicious traffic - negative
non-offending/normal traffic - positive
You should read the material for the 210-260 exam. The 640-533 is the older exam version.
same LAB sim. is NAT/ACL , also the same CCP question.
GOOD LUCK TO ALL.
Brgrds,
This is 100% valid. Same simulations as well.
Simulations came was of ACL + NTP. Easy one. got 958/100
corect answer is "switchport nonegotiate " When you use this command, you are manually enabling trunking to ON so it does not try to negotiate with rogue switches and hackers from avoid VLAN hopping.
no switch-port trunk native VLAN1 will remove the default native VLAN1 on the trunk. On the trunk you need a native vlan or your trunk will not carry untagged frames. for example, if you have a hub connected to your switch that is vlan tag aware.
some points to keep in mind is,
1> Malicious traffic are bad so consider it as "0" (BAD)
2> Non Malicious traffic are good so consider it as "1" (GOOD)
3> Alert is bad, so when it comes then "0" (BAD) and when doesn't then "1" (GOOD)
Now:----------------------
If traffic type and Alert is similar (i mean same value) then the type is always True, and positive and negative depends on the alert.
If traffic type and Alert is dissimilar (i mean different value) then the type is always False, and positive and negative depends on the alert.
Example:-----------------------------------
a>Traffic is malicious (that means BAD or 0)
Alert did not come (that means GOOD or 1)
Here both (Traffic and Alert) has the different value so definitely the type is "False". Now the alert is "1" or "No Alert"..........SO this is "False" "Negative"
b> Traffic is malicious (BAD or 0)
Alert did come (BAD or 0)
Here both (Traffic and Alert) has the same value so definitely the type is "True". Now the alert is "0" or "Yes Alert"..........SO this is "True" "Positive"
Now practice for the rest two type......
Please let me know if it was helpful....@[email protected]
you can check that link bro
https://learningnetwork.cisco.com/thread/10795
Passed with high score.
All questions from this site. No changes.
sdee and https is the correct answer for IPS, but i do not agree with Cisco.
Thanks Prepaway, GNS3 team and All of you who contributes to keep updated the information.
thanks for your feedback. Can I ask you what is the 5 questions Hotspot you're talking about?
Also, pay attention on Q88 (the one asking for 5 answers on the allowed traffic in the zone-based firewall).if you simulate with random answers, most of the time they are wrong.
Cheers
@Abdul Latif from Pakistan, the pass mark for the 210-260 is 804
because it not explained clear on this Dump
thanks God
for ACL/NTP sim I recommend Misha Dumps.
Went through keith's barker 210-260. This dump as well as Anon's. posted july 30. Good thing with Anon's is that there are 3 sets, one is all objective type. The 2nd one are all drag&drop which is interactive. The last set would be the labs.
70 questions includes 5 DND, Hotspot questions and 1 CCP NTP Lab.
I have not tried CCP before, just make sure that you know how to navigate around to get the answers. Every point is inactive.You can refer to Elvin Dionisio's post last oct7 regarding this. Do not memorize the answer for the CCP as they change it, following the step by step process listed would be enough.
I encountered the same issue with Edward with regards to the Hotspot NAT ACL1 question in which i also can not navigate through it.
Thanks again for sharing the dumps and all your comments. Good luck to those who will be taking the exam.
Cheers!
Posted by seenagape on October 6, 2017 Leave a comment (0) Go to comments
Scenario:
You are the security admin for a small company. This morning your manager has supplied you with a list of Cisco ISR and CCP configuration questions. Using CCP, your job is to navigate the pre-configured CCP in
order to find answers to your business question.
1-) What NAT address will be assigned by ACL 1?
A.
192.168.1.0/25
B.
GigabitEthernet0/0 interface address
C.
172.25.223.0/24
D.
10.0.10.0/24
ANSWER is A
2-) What four protocols are included in the inspection Class Map OUT_SERVICE? (choose four)
A.
FTP
B.
HTTP
C.
HTTPS
D.
SMTP
E.
P2P
F.
ICMP
answers = a , b , c y f
Which Class Map is used by the INBOUND Rule?
A.
SERVICE_IN
B.
Class-map ccp-cls-2
C.
Ccp-cls-2
D.
Class-map SERVICE_IN
answer is B
4-) What is included in the Network Object Group INSIDE? (choose two)
A.
Network 192.168.1.0/24
B.
Network 172.25.133.0/24
C.
Network 10.0.10.0/24
D.
Network 10.0.0.0/8
E.
Network 192.168.1.0/8
Answers is B and C
Which policy is assigned to Zone Pair sdm-zp-OUT-IN?
A.
sdm-cls-http
B.
OUT_SERVICE
C.
ccp-policy-ccp-cls-1
D.
ccp-policy-ccp-cls-2
answers is D
IF you can not go through the CCP and get the answers , just memorize and choose those 5 answers and you will get 100 in this HOTSPOT , this is the HOTSPOT that everybody is mentioned
Just wanna share with you about my exam experience..
and as well to say that, This DUMP is STILL 100% VALID.
I have cleared today the ccna sec exam. and i must admit, i only study for about 5 or 6 days with ONLY THIS DUMP and nothing else (of couse i have attended a class here in India- Koenig). Its just few (2 or 3 quations) that i didnt see in this Dump, but still, that will not play that big Impact at all.
So for those thinking of taking this exams, please do so, coz if i made it within 5, 6 days of studying. so anyone of u can do it as well.but please make sure you study hard and dont just go for mem the quation, but get to know them practicaly, coz some quation and labs n Sim must change.
So thank you so much master NOAN with this 138 Dump quations that made my day. fully and total and deep appreciation.
And good luck for anyone getting ready to go for the exam,
so just go through dump over n over, ya´ll make it.
God bless n protect
Peace
switchport nonegotiate
no switch-port trunk native VLAN1
is the 2nd one is the answer.? correct me please..
You can pratice the labs on the packet tracer on 5.3 and above version. Better to go with the latest version of packet tracer for lab & ETE 3.2 version for exam dumps
A inside the firewall of the corporate headquarters internet connection
B at the entry point into the data centre
C outside the firewall of the corporate headquarters internet connection
D at the remote branch offices
on the prep eam by naomi it shows answers is D but i believe it's worng and the answer should be A
and the lab question What NAT address will be used ACL 1
As the pathway given in dumps is blocked in exams so To know the answer, ROUTER> ACL > NAT (option) check the translated address and go to interface and management and then click edit interface to see weather that address really matches with outbound address
And in Network objects group question, like in dumps where it shows both answers, in exam, it is little modified, you have to go to network object screen only one adress is being shown ,,, so you have to scroll down a little,,, you will see edit option click on edit to see both adress
The most confusing question of all,,, What class map will be used by inbound rule and the options given were confusing as hell why?
because when we go to Security>Firewall>Firewall
And all the options listed in MCQ is actually assigned to OUT TO IN rule instead of IN TO OUT rule
so I made an educated guess.
And lab was same, configure NTP and ACL
rest of questions were same
i got 70questions with 2 labs. CCP NTP Lab (u can find it in the misha dump) and the CCP Hotspot lab (misha dump again)
NTP Lab was the same
Hotspot lab not! different ip addresses. look @previous post from "Elvin Dionicio" in Hotspot Lab Q1 my answer was C not A.
I never worked in CCP before, but u dont have to worry, EVERY point in ccp is inactive (u cant click on it) or just empty, so u just have to click to every menu and u will have to get the right answer. whole lab took me about 8 minutes.
Can any one tell me the answer with Explanation.
i passed security exam
Valid dumps
can someone suggest me the best book to start my ccna-security?
please answer .
Thanks you
Link-local is not a unicast address, because unicast address are global.
Please help me, I am new to CCNA-Security, can someone help me find a good site for CCNA-Security lab practice
Thank you
Passed the exam yesterday (26-10-13), I got one question out of the dumps for which the options where similar to one having True Positive, True Negative, False Positive & False Negative.
Options are jumbled in the questions, so don't go with the option sequence.
Thanks to all who supported me over here in passing this exam and best wishes for those who are about to write the exam.
Thanks, Thomas
Passed 969/1000.
All questions from dump. Also make sure you know how to do the NTP/ACL simulation.
Please use the dump as a revision tool and not a learning one.
all questions from dump however answers are mixed up
Labs: NTP (from dump) and HOTSPOT (But not from dump in dump, though the concept is similar)
where i can find these?
give me some links to practice.
thanx.
Dumps are 100% valid. All the questions are from dumps. I got 900+ score, thanks to uploader.
Tips: Few answers in dumps must be incorrect because I did not get 100% in any section though answers were shuffled but I marked the exact choices. Still dumps lead to pass :)
I can help you understand some concepts.
http://juantron.wix.com/my-networking-online
Thank you.
There are two access list rule
1. permit any source and any destination for protocol eigrp
2. permit any source to the 10.0.2.0/24 network for protocol 80
then at the end there is a
Note: Allow CCP to add an entry rule to allow NTP traffic
So do we have to create another access list to allow NTP traffic???
Pls help.
Security and Cisco Routers 80%
AAA on Cisco Routers 100%
IOS ACLs 100%
Secure Network Management and Reporting 100%
Common Layer 2 Attacks 100%
Cisco Firewall Technologies 92%
Cisco IPS 100%
VPN Technologies 100%
Total Score: 979
This dump is a very helpful one but you need to keep in your minds there are some questions which need to be fixed.
Thanks for the one who uploaded dump and share it...
Dump is still valid, I passed the exam with good result.
I found a new drag & drop question regarding IPS. basically is the same that is in the dump (that is still there, I got both) where you're asked to identify what is the True positive, true negative and so on. very easy if you studied!!
Moreover ,the HOTSPOT lab is a little bit different from the dumps. In particular I was not able to navigate the NAT ACL 1 rule. so I had to "guess" checking the other active tab (i didn't memorize answers from DUMP, I am only familiar with CCP). However, answers are the one posted by Elvin but the first one is not A but C, as suggested guyfromhamburg.
As someone else said. be familiar with CCP before entering the exam room!!
So, good luck guys!!
Thanks to all guys who shared their experience and to them who shared dumps :)
Edgard
Cheers.
This dumps is still valid.I have passed my exam today.Thanks to Naom and prepawayl team.
Thanks again for your great support.
my Skype mata.lim1
A. syslog
B. SDEE
C. FTP
D. TFTP
E. SSH
F. HTTPS
the correct answer is BF
Passed 16.09.2017.
Thanks.
ACL/NTP Lab ,Navigate to find the answer , Drag and drop same from dump no new Questions apart from dump ,All the Very best to the future taker.
This is Sufficient to clear the Exam.
About the ccp hotspot questions 2 and 3 in the security>firewall>firewall graph.
In q 2 it shows ths class map OUT_SERVICE, in q 3 it show class map ccp-cls-2.
You follow the same steps for both, it is the same graph, but in q2 it doesn't show class map ccp-cls-2 and in q3 it doesn't show class map OUT_SERVICE.
I also see it is the same router. How can this be? Confusing.
Thank you.
Please help me, I am new to CCNA-Security, can someone help me find a good site for CCNA-Security lab practice and what about dumps
At the time I was concerned when i started the exam, but questions were still based on Noam.138q.ete .
Knowledge shoulden´t be denied for who want to learn!!! - by my own.
https://www.youtube.com/channel/UCm1yxGFa5zLKPls9Sw7hb4A/videos
all question from dump thank you so much Noam and all supprter
anyone gave the test from planwell for security. is the pool the same or changed.
please reply.
Please tell what are the new HOTSPOT questions and answers.
Thanks a lot for the dump.
I have a question regarding the simulatione of the Switch Port Security.
The exercise says that on fa0/12 we need to configure the port security allowing a maximum of 2 mac addresses. My doubt/question is the following. in real world, there are some IOS versions that require to first activate the switchport port-security and then add all the relative values. in this case, following real world, I should use commands like this:
# conf t
config # int fa0/12
config-if # switchport mode access
config-if # switchport port-security
config-if # switchport port-security maximum 2
config-if # switchport port-security violation shutdown
config-if # no shut
config-if # end
On the contrary, I see in the suggested answer that the first "config-if # switchport port-security" has not been used. What do you think about? Can we omit this command and have the answer validated?
Cheers
in other cve the order is different and the correct is correct too
1) ipv6 drag and drop - it is important the order of the items in the answer?
2) symmetric and asymmetric algorithm - it is important the order of the items in the answer?
3) ips/ids it is important the order of the items in the answer?
4) ike phases? . we have 2 drag and drop about it
5) initiation.. implementation .. acquisition.. ?
thanks to all, please help me guys
I had 2 labs NTP and CCP configuration questions as Elvin wrote.
And also about 8 D&D make sure you know them all
same questions but answers are jumbled.
any one with this book Implementing Cisco IOS Network Security (IINS 210-260) Foundation Learning Guide, Rough Cuts, 2nd Edition
please help me. i dont have the guts to buy it. please help. inbox me [email protected]
[email protected]
look for the Correct Cisco answer and and not what you think is correct,
what do they mean by this note
note: allow the ccp to add entry rule to allow NTP traffic
.
i realized that i should state
# permit udp any any eq ntp
or # permit udp any any eq 123
since ntp use port 123 .
what does level 5 in this enable secret global configuration mode command indicate ?
router# enable secret level 5 password
the correct answer is (F) the enable secret password is for accessing exec privilege level 5
rather than (E) set the enable secret command to privilege level 5
note: router(config)# privilege exec level 5 enable
this line of command does the option (E)
Add an additional Rule Entry to the Access Rule
Permit any source to the 10.0.2.0/24 network for protocol 80.
The answer says allow tcp port 80.
But I think it should be IP and pick protocol 80
Why permit tcp any 10.0.2.0 0.0.0.255 eq 80
But not permit 80 any 10.0.2.0 0.0.0.255
false negative
false positive
true negative
true positive
if its not from dump ? Wht were the questions ?
p.s.
Cli interface rulez,GUI sucks!
Yes it does have two permit statements saying that in the .16 network will be allowed to go to .1.2 host. via port 80 and port 443
and deny any others to .1.2
Congrats on all of you who have passed. I passed the CCNA R&S one month ago and now I'm going after the CCNA Security.
My question is where can I get the lab simulations for practice?
For the CCNA R&S the place to go was 9tut.
Most of you mentioned HotSpot and NTP/ACL.
So, can you please tell me where can I find these lab simulations?
10x
Dump is 100% Valid.
* HotSpot Questions similar and answers are different from dump.
* Lab Sim - Identical
* Had about 6 Drag n Drop (IKE Phases, TACACS/RADIUS etc.)
This dump is more than enough to get above 900/100
Thanks again!!
All the best to the rest of the test takers. :)
NTP , IOS Firewall Zone Pairs questions were on my exam.
Multiple choice questions were 95% identical, answers where just in different locations. As long as you know the overall logic, you should be good :) THANKS !!
True negative ----------- no attack no alarm
false negative ---------- attack no alarm
false positive ------------- no attack alarm
true positive -------------- attack alarm
Please correct
I have cleared ccie R&S written exam, can i appear ccna security or ccnp security. Kindly suggest as soon as possible.
NTP Lab and Hotspot
pretty easy
Answer C: "any TCP traffic sourced from host 172.26.26.30 destined to host 192.168.1.1"
will match "access-list 100 permit ip any any since none of the more specific ACL will match it.
you may need more CCNA training before taking this test.
Sender encrypts data using receceivers public key, and the reciever decrypts using the receivers private key.
Not totally sure, but Isn't the reverse also sometimes true? (Answer listed as A)
The sender encrypts the data using the senders private key, and the receiver decrypts the senders public key?
Meaning , I send data to you encrypted using my private key, so you need to decrypt using my public key ??
Many thanks
Training "CBT Nuggets"
1) CPP does not have a deliver button,so do waste your time looking for one. You would just have to just configure the CCP wizard.
2) As explained earlier , almost by everyone, the options are not in the same order. so learn the answers to perfection.
3) The order of the DND is not important as long as they belong to the correct phase.
Lab, NTP etc.you will not see the save botton to deliver the config to the device from CCP
Understand all the drag and drog in this Dump
understand how to find answer by navigating in CCP ( ACL Editor, Firewall etc.)
Total Question: 70
passed with 967
thanks to all.
Labs are NTP ACL from the dumps, zone based implementation questions using CCP to find the answers quiet easy if you are familiar wt CCP and even as amateur, a bit more drag and drop questions.
*MATERIALS USED*
1. CCNA Security 210-260 Official Cert by GuideKeith Barker, and CCIE No. 6783 Scott Morris, CCIE No. 4713
2.Don't have cash to set-up a home-lab but i used GNS3 with CCP, and it works perfectly just like a real world router operating with CCP.
3. Some few online videos by CBTNUTGETTS and TRAINSIGNAL.
Initiation
Acquisition and development
Implementation
Operations and maintenance
Disposition
Also the options are in random order, so be careful.All the best guys
The exercise is as follows
Lab simulation 1-) Configure NTP , preferred NTP Server IP 192.168.4.2 , source interface fe 0/1 , auth Key = 1
2-) Create a new access rule whith name INBOUND and Type EXTENDED RULE
3-) Create and add a new rule entry to the access rule , permit any soure and any destination for protocol EIGRP
4-) Add an additional Rule entry to the access rule , permitt any source to the 10.0.2.0 /24 netowrk protocol 80
5-) Associate this new Access Rule to the OUTSIDE interface in the INBOUND direction
Note : Allow CCP to add an entry rule to allow NTP traffic
BE SURE THAT YOU CAN DO THIS IN THE ccp before going inside that room
Please help me,i'm going to take the exam in 3rd august.If you have any update pls mail.Thanks.
best regards
Milton
Just want to thank Prem Kumar for his help.
Thanks also to prepaway
For Q73
Which traffic is permitted by this ACL?
access-list permit tcp 176.26.26.16 0.0.0.7 host 192.168.1.2 eq 443
access-list permit tcp 176.26.26.16 0.0.0.7 host 192.168.1.2 eq 80
access-list deny tcp any host 192.168.1.2 eq telnet
access-list deny tcp any host 192.168.1.2 eq www
access-list 100 permit ip any any.
The dump says that the correct answer is C:
any TCP traffic sourced from host 172.26.26.30 destined to host 192.168.1.1 is the correct answer.
I thought the correct answer would be D:
any TCP traffice sourced from host 172.26.26.20 to host 192.168.1.2
the 0.0.0.7 gives the range from 16 to 22 I think so the .20 would be inside that range not the .30, can someone please explain ?
Thank You
The life cycle should be :
1)Initiation
2)Acquisition and development
3)Implementation
4)Operations and maintenance
5)Disposition
http://www.ciscopress.com/articles/article.asp?p=1998559&seqNum=4
LAB: CCP HOTSPOT
NTP with CCP
passing score 969, 70 questions in my exam. Good Luck.
Got hot spot 5 qns. 1 is different you have to look under class map or policy map inspection to find out here is the out to in is. Edit firewall won't tell you.
And NAT you have to look under router NAT the other one is blocked.
I don't remember the qns. Only prob is for the NTP I didn't know how to on the ccp.
What resources do you recommend for passing CCNA-SEC ? How do you practice the labs ?
Thank you so much!
.....................
dump is valid
all questions from dump.
thank you Noam
the second case if there is a CA involved pls go thru the CBT nuggets videos he explains it very welll
Yes CCENT is valid as prerequisite to certify as CCNA Security, you no longer need CCNA Route to test for the security course.
Source: http://www.cisco.com/web/learning/certifications/associate/ccna_security/index.html
can i take this Exam to become a ( CCNA Security ) and bypass 200-105 ICND2
If you are about to take your exam just do it like i did.
use this test as a review. very good source
where in Pakistan did you take the test from
And Thankyou, Noam.
My study material was CBT Nuggets 210-260, labs on GNS3 + Cisco Security Manager and this sim.
Good luck to the future test takers :-)
If you pass and succeed your CCNS certicifation, your CCNA will be estend to three more years. Good luck.
Crispin
The only true question is the one whose destination is 192.168.1.1 that has no deny on ACL and it has a permit ip any any.
PS. Mine is Q73
Answer is SDEE and Syslog not HTTPS
I have a questions
Do I have to study and reviewing these questions only? "137"
or must study the 553 exam questions and 554 questions ?
I am surprised because in CCNA R&S almost 700 question?
What are the common labs that coming in the exam?
PLZ Help
Thank you very much, Drag and Drop plus sims all good.
You do not need to configure CCP, in the exam its preconfigured. As part of preparation just farmiliarize yourself with CCP in terms of navigation because some of the options are disabled in the exam, so you should know an alternative way of getting the required info.
The labs are pretty straight forward compared to the ones in CCNA
Thanks Exam collection
Do the dumps include the exam Labs or we have to get them from somewhere else?
Regards.
My ccna certificate 9 months later will be expire. If ı will pass ccna security exam (210-260). My ccna certificate will be expire or not?
Thanks to all
LABs : NTP with ACL
Hotspot : zone based implementation
All the Drag and Drops
dump is valid
all questions from dump.
thank you Noam
Same NTP question came
Hot spot had some little changes