Log into your Prepaway Account
Please Log In to download ETE file or view Training Course
Registration is free and easy - just provide your E-mail address.
Click Here to Register
Exam: | 300-208 - CCNP Security Implementing Cisco Secure Access Solutions (SISAS) |
Size: | 8.78 MB |
Posted: | Friday, October 6, 2017 |
Download:
|
Cisco.Braindumps.300-208.v2017-10-06.by.kylie.170q.ete |
Download Free 300-208 Exam Questions |
Log in to make your opinion count.
Registration is free and easy - just provide your E-mail address.
Click Here to Register
Use Discount Code:
A confirmation link was sent to your e-mail.
Please check your mailbox for a message from [email protected] and follow the directions.
I failed yesterday with 681/1000 and got 15 questions which are not in this file, i.e. when did the ISE purge something.
Passed with 9xx.
cause i need it very urgently
Thanks
Latest actualtests is valid , I passed the exam yesterday
57 Q 1 DD , 2 SIM
Passed 300.208 with 9xx.
I Saw only one question that wasnt in this file
Good Luck Guys
I have just finshed passed the exact today just now.
I have new question who are not in dump.
Two simulation questions
Number of questions: 57
Passing Score: 846
My Score: 948
Vadilidy: 97 %
Thank you in advance!
Jim
i pass with 960/1000
Exam A
Q22
Refer to the exhibit
asa1(config)# time-range WeekendHours
asa1(config-time-range)# periodic friday 18:00 to monday 8:00
asa1(config)# access-list Outside extended deny ip any object-group vpnservers time-range WeekendHours
log
asa1(config)# access-group Outside in outside
If the given configuration is applied to the object-group vpnservers, during which time period are external
users able to connect ?
A - From Monday at 8:01 a.m until Friday at 5:59 p.m
B - From Friday at 6:01 p.m until Monday at 8:01 a.m
C - From Friday at 6:00 p.m until Monday at 8:00 a.m
D - From Monday at 8:00 a.m until Friday at 6:00 p.m
In dump the exact answer is C.
But due to the type of permission "deny" in the "Outside" access-list, I think that the good answer is A.
I very sure that those who try this question in lab simulation can approve it.
I am sure that the following configuration will already be done (No need to write the following commands):
Int Fastethernet 0/19
description Employee PC
Switchport access VLAN 9
Switchport mode access
IP access-group Basic-ACL in
Authentication host-mode multi-auth
Authentication open
Authentication port-control auto
Authentication periodic
Authentication timer reauthenticate server
dot1x pae authenticator
dot1x timeout tx-period 10
spanning-tree portfast
What we have to do is to configure the following:
conf t
interface fa 0/19
mab
authentication order mab dot1x
authentication priority dot1x mab
shut
no shut
end
How to check the Authentication succeeded, Authentication failed on ISE.
I means where to click (which options to click to check these authentications).
Kindly help me.
Regards
Thanks mate for your consideration.
I have passed the exam today.
Ralph dump is valid.
1 DD, 2 LABs, 4 MCQs (Topolgy)
Regards
Int Fastethernet 0/19
description Employee PC
Switchport access VLAN 9
Switchport mode access
IP access-group Basic-ACL in
Authentication host-mode multi-auth
Authentication open
Authentication port-control auto
Authentication periodic
Authentication timer reauthenticate server
dot1x pae authenticator
dot1x timeout tx-period 10
spanning-tree portfast
----------------------------
I have only to configurate this?
conf t
interface fa 0/19
mab
authentication order mab dot1x
authentication priority dot1x mab
shut
no shut
end
show authentication sessions int fa 0/19
copy running-conf startup-config
-------------------------------
Please I need your help! Thank you in advance!
The exam was from Ralph.
1 DD, 2 LABs, 4 MCQs (Topolgy)
If you know how to use ISE then the labs and MCQs (Topology) will be easy for you.
Regards
(1) We have to configure the following or the following configuration will already be done.
Int Fastethernet 0/19
description Employee PC
Switchport access VLAN 9
Switchport mode access
IP access-group Basic-ACL in
Authentication host-mode multi-auth
Authentication open
Authentication port-control auto
Authentication periodic
Authentication timer reauthenticate server
dot1x pae authenticator
dot1x timeout tx-period 10
spanning-tree portfast
(2) We have to configure the following only?
conf t
interface fa 0/19
mab
authentication order mab dot1x
authentication priority dot1x mab
shut
no shut
end
(3) OR We have to configure the following only
conf t
interface fa 0/19
mab
shut
no shut
end
Is dump still valid?
Kindly let me know because tomorrow (15th October) is my test day.
Regards
170 is a good one with a couple of errors in the labs and maybe for access hours acl question
in the labs the question abuot the dot1x auth for user is
The IT_Corp authorization profile were applied.and not the one regarding the authorization policy
and the lab about the switch conf requires:
conf t
interface fa 0/19
mab
authentication order mab dot1x
authentication priority dot1x mab
shut
no shut
end
show authentication sessions int fa 0/19
copy running-conf startup-config
(last line to check as required in the lab)
174 dump is still valid. One thing for mab sim, after shut and no shut int fa0/19, the interface is only UP for a few seconds and after that both line and protocol ar down. When check with show authentication session int fa0/19, I see that mab is successfully authenticated.
Is there any Lab Simulation sites for practice prior to take an exam. Your invaluable advise would be much appreciated. Thanks
When the MAC authentication bypass feature is enabled on an 802.1x port, the switch uses the MAC
address as the client identity. The authentication server has a database of client MAC addresses that are
allowed network access. After detecting a client on an 802.1x port, the switch waits for an Ethernet
packet from the client. The switch sends the authentication server a RADIUS-access/request frame with
a username and password based on the MAC address. If authorization succeeds, the switch grants the
client access to the network. If authorization fails, the switch assigns the port to the guest VLAN if one
is configured.
If an EAPOL packet is detected on the interface during the lifetime of the link, the switch determines
that the device connected to that interface is an 802.1x-capable supplicant and uses 802.1x
authentication (not MAC authentication bypass) to authorize the interface. EAPOL history is cleared if
the interface link status goes down.
conf t
interface fa 0/19
authentication port-control auto
mab
end
copy running-conf startup-conf
The lab already says that 802.1x works and if you look all of the needed features of AAA is already done. If you do authentication order mab dot1x, you will force mab first and the dot1x will not go through. Leave that one auto and it will perform dot1x first. If it fails, then there is a timeout set to re-authenticate in 10 minutes. Don't believe me - confirm it with Configure IEEE 802.1x Port-Based Authentication PDF ("Security Software Configuration Guide or Cisco IE 2000U and Connected Grid Switches")
Is there any Lab Simulation sites for practice prior to take an exam. Your invaluable advise would be much appreciated. Thanks