PMI CAPM Practice Test 45
Question 440
For an original CAPM project delivery study scenario, consider: A contractor substitutes a component under a formal request but execution teams never receive the approved drawing version and quality criteria. Select TWO complementary steps: the targeted correction and its strongest prechange validation.
- Check: Inspect change disposition, document revision IDs, work authorization, updated budgets, dates and acceptance tests across stakeholders.
- Check: Map each proposed activity to its purpose, authorization, baseline, performance information and closure evidence.
- Change: Maintain a consistent integrated plan and update all impacted baselines, requirements and communications following an authorized change.
- Revise only the easiest spreadsheet and assume remaining project documents automatically receive identical approved changes.
- Change: Forecast final cost using an appropriate earned-value assumption, such as EAC=BAC divided by CPI when current cost efficiency is expected to continue.
Explanation
Correct Answer
A:Scope, schedule and cost baselines are interdependent control references; an approved change must be translated into coherent current execution documents. Required intervention: Maintain a consistent integrated plan and update all impacted baselines, requirements and communications following an authorized change.
C:Scope, schedule and cost baselines are interdependent control references; an approved change must be translated into coherent current execution documents. Evidence: Inspect change disposition, document revision IDs, work authorization, updated budgets, dates and acceptance tests across stakeholders.
Incorrect Answers
B:Applied case: A contractor substitutes a component under a formal request but execution teams never receive the approved drawing version and quality criteria.
D:Scope, schedule and cost baselines are interdependent control references; an approved change must be translated into coherent current execution documents.
E:This option addresses a different CAPM project management topic (Estimate at completion forecasting) rather than the documented Integrated baseline and change control decision.
Question 441
A CAPM project team analyst is reviewing this delivery scenario: A municipal pipeline project defines leak-test criteria but the delivery team runs only a final visual inspection and declares quality assurance completed. An unsafe shortcut would be: Delete failed test results and claim an approved quality plan itself proves the output meets every contract tolerance. What should the project team analyst recommend as the narrowly scoped correction? Select ONE best answer.
- Compute cost variance as EV minus AC, using comparable value and actual-cost units; negative means over budget for performed work.
- Plan prevention and verification methods, measurement thresholds and nonconformance responses, then execute the documented quality controls.
- Identify the actual controlling path and available total float before deciding whether fast-tracking, crashing or no compression is justified.
- Delete failed test results and claim an approved quality plan itself proves the output meets every contract tolerance.
Explanation
Correct Answer
B:Quality planning specifies how processes and deliverables meet requirements; control measurements demonstrate observed conformance to those requirements.
Incorrect Answers
A:Compute cost variance as EV minus AC, using comparable value and actual-cost units; negative means over budget for performed work. Quality planning specifies how processes and deliverables meet requirements; control measurements demonstrate observed conformance to those requirements.
C:Identify the actual controlling path and available total float before deciding whether fast-tracking, crashing or no compression is justified. Quality planning specifies how processes and deliverables meet requirements; control measurements demonstrate observed conformance to those requirements.
D:Quality planning specifies how processes and deliverables meet requirements; control measurements demonstrate observed conformance to those requirements.
Question 442
A project delivery review finds: A municipal pipeline project defines leak-test criteria but the delivery team runs only a final visual inspection and declares quality assurance completed. The team proposes: Plan prevention and verification methods, measurement thresholds and nonconformance responses, then execute the documented quality controls. Which project management principle most strongly supports the proposed response? Select ONE best answer.
- Predictive monitoring depends on traceable baseline comparisons and controlled records; one status narrative cannot replace underlying evidence.
- Quality planning specifies how processes and deliverables meet requirements; control measurements demonstrate observed conformance to those requirements.
- Predictive planning is effective when major outcomes and dependencies can be defined before substantial execution and changes need visible authorization.
- A work package is a WBS control unit for estimating and responsibility; its constituent activities consume time to produce its deliverable.
Explanation
Correct Answer
B:Demonstrable success requires: Product measurements and documented controls meet the agreed standard, and deviations have explicit corrective or acceptance decisions.
Incorrect Answers
A:Predictive monitoring depends on traceable baseline comparisons and controlled records; one status narrative cannot replace underlying evidence. Quality planning specifies how processes and deliverables meet requirements; control measurements demonstrate observed conformance to those requirements.
C:Predictive planning is effective when major outcomes and dependencies can be defined before substantial execution and changes need visible authorization. Quality planning specifies how processes and deliverables meet requirements; control measurements demonstrate observed conformance to those requirements.
D:This option addresses a different CAPM project management topic (Work packages versus activities) rather than the documented Quality management plan and control decision.
Question 443
The project team has not approved a broad project-plan change. Available evidence indicates: A municipal pipeline project defines leak-test criteria but the delivery team runs only a final visual inspection and declares quality assurance completed. Which evidence best tests the project diagnosis before approving a disruptive change? Select ONE best answer.
- Compare planned test methods, sampling, calibration or audit evidence and actual failure handling against acceptance tolerances.
- Verify EV and PV at the same status date, the units of value and the reported subtraction rather than using actual cost.
- Review the activity list, predecessor links, dependency type, lag assumptions and consequences of each violated relationship.
- Verify that requirements are sufficiently stable, mandatory approvals are known and schedule or contract constraints justify baseline control.
Explanation
Correct Answer
A:Quality planning specifies how processes and deliverables meet requirements; control measurements demonstrate observed conformance to those requirements.
Incorrect Answers
B:Verify EV and PV at the same status date, the units of value and the reported subtraction rather than using actual cost. Quality planning specifies how processes and deliverables meet requirements; control measurements demonstrate observed conformance to those requirements.
C:Review the activity list, predecessor links, dependency type, lag assumptions and consequences of each violated relationship. Quality planning specifies how processes and deliverables meet requirements; control measurements demonstrate observed conformance to those requirements.
D:Verify that requirements are sufficiently stable, mandatory approvals are known and schedule or contract constraints justify baseline control. Quality planning specifies how processes and deliverables meet requirements; control measurements demonstrate observed conformance to those requirements.
Question 444
A candidate project response has been piloted and stakeholders require a post-change acceptance check. Original problem: A municipal pipeline project defines leak-test criteria but the delivery team runs only a final visual inspection and declares quality assurance completed. The accountable project owner requires evidence that outcomes are met without disrupting planned work. Which acceptance result demonstrates that the project response meets the intended outcome? Select ONE best answer.
- Product measurements and documented controls meet the agreed standard, and deviations have explicit corrective or acceptance decisions.
- Reports and source controls reconcile at the reporting date, exposing variance, ownership and authorized changes without contradictory status.
- The report correctly shows CV=-30 for EV120/AC150 or CV=+15 for EV210/AC195, with no false comparison to elapsed days.
- Compliance deliverables meet predefined criteria and unavoidable changes are assessed instead of introducing untraceable requirements drift.
Explanation
Correct Answer
A:Quality planning specifies how processes and deliverables meet requirements; control measurements demonstrate observed conformance to those requirements.
Incorrect Answers
B:Reports and source controls reconcile at the reporting date, exposing variance, ownership and authorized changes without contradictory status. Quality planning specifies how processes and deliverables meet requirements; control measurements demonstrate observed conformance to those requirements.
C:The report correctly shows CV=-30 for EV120/AC150 or CV=+15 for EV210/AC195, with no false comparison to elapsed days. Quality planning specifies how processes and deliverables meet requirements; control measurements demonstrate observed conformance to those requirements.
D:Compliance deliverables meet predefined criteria and unavoidable changes are assessed instead of introducing untraceable requirements drift. Quality planning specifies how processes and deliverables meet requirements; control measurements demonstrate observed conformance to those requirements.
Question 445
An implementation sign-off request identifies the following problem: A municipal pipeline project defines leak-test criteria but the delivery team runs only a final visual inspection and declares quality assurance completed. Which paired project management action and verification should close the review? Select ONE best answer.
- Change: Model real task precedence and suitable finish-to-start or other valid relationships with explicit lags before calculating the project network schedule. Verify: Review the activity list, predecessor links, dependency type, lag assumptions and consequences of each violated relationship.
- Change: Compute schedule variance as EV minus PV and interpret negative as behind the value baseline and positive as ahead in earned-value terms. Verify: Verify EV and PV at the same status date, the units of value and the reported subtraction rather than using actual cost.
- Change: Compute cost variance as EV minus AC, using comparable value and actual-cost units; negative means over budget for performed work. Verify: Check EV earned through status and AC booked for the same work, then calculate the signed difference and variance narrative.
- Change: Plan prevention and verification methods, measurement thresholds and nonconformance responses, then execute the documented quality controls. Verify: Compare planned test methods, sampling, calibration or audit evidence and actual failure handling against acceptance tolerances.
Explanation
Correct Answer
D:The change is successful only when: Product measurements and documented controls meet the agreed standard, and deviations have explicit corrective or acceptance decisions.
Incorrect Answers
A:Change: Model real task precedence and suitable finish-to-start or other valid relationships with explicit lags before calculating the project network schedule. Quality planning specifies how processes and deliverables meet requirements; control measurements demonstrate observed conformance to those requirements.
B:Change: Compute schedule variance as EV minus PV and interpret negative as behind the value baseline and positive as ahead in earned-value terms. Quality planning specifies how processes and deliverables meet requirements; control measurements demonstrate observed conformance to those requirements.
C:Change: Compute cost variance as EV minus AC, using comparable value and actual-cost units; negative means over budget for performed work. Quality planning specifies how processes and deliverables meet requirements; control measurements demonstrate observed conformance to those requirements.
Question 446
A CAPM project team analyst is reviewing this delivery scenario: A regulated software release uses defect counts to prove the product is compliant but has not demonstrated required traceable test coverage. An unsafe shortcut would be: Delete failed test results and claim an approved quality plan itself proves the output meets every contract tolerance. What should the project team analyst recommend as the narrowly scoped correction? Select ONE best answer.
- Decompose approved scope into a deliverable-oriented WBS whose lowest work packages can be estimated, assigned and verified.
- Distinguish initiating authorization, planning baselines, executing work, monitoring and controlling deviations, and closing or handover tasks.
- Plan prevention and verification methods, measurement thresholds and nonconformance responses, then execute the documented quality controls.
- Delete failed test results and claim an approved quality plan itself proves the output meets every contract tolerance.
Explanation
Correct Answer
C:Quality planning specifies how processes and deliverables meet requirements; control measurements demonstrate observed conformance to those requirements.
Incorrect Answers
A:Decompose approved scope into a deliverable-oriented WBS whose lowest work packages can be estimated, assigned and verified. Quality planning specifies how processes and deliverables meet requirements; control measurements demonstrate observed conformance to those requirements.
B:Distinguish initiating authorization, planning baselines, executing work, monitoring and controlling deviations, and closing or handover tasks. Quality planning specifies how processes and deliverables meet requirements; control measurements demonstrate observed conformance to those requirements.
D:Quality planning specifies how processes and deliverables meet requirements; control measurements demonstrate observed conformance to those requirements.
Question 447
A project delivery review finds: A regulated software release uses defect counts to prove the product is compliant but has not demonstrated required traceable test coverage. The team proposes: Plan prevention and verification methods, measurement thresholds and nonconformance responses, then execute the documented quality controls. Which project management principle most strongly supports the proposed response? Select ONE best answer.
- The WBS organizes all approved project scope by deliverables and supports a scope baseline; activities and calendar dates are planned from that work.
- Quality planning specifies how processes and deliverables meet requirements; control measurements demonstrate observed conformance to those requirements.
- Total float is schedule flexibility before project finish or successor constraints are affected; compressing work off the critical path may not improve completion.
- Sequence logic represents technical or contractual dependencies; calendar dates cannot replace a correct dependency network.
Explanation
Correct Answer
B:Demonstrable success requires: Product measurements and documented controls meet the agreed standard, and deviations have explicit corrective or acceptance decisions.
Incorrect Answers
A:The WBS organizes all approved project scope by deliverables and supports a scope baseline; activities and calendar dates are planned from that work. Quality planning specifies how processes and deliverables meet requirements; control measurements demonstrate observed conformance to those requirements.
C:Total float is schedule flexibility before project finish or successor constraints are affected; compressing work off the critical path may not improve completion. Quality planning specifies how processes and deliverables meet requirements; control measurements demonstrate observed conformance to those requirements.
D:Sequence logic represents technical or contractual dependencies; calendar dates cannot replace a correct dependency network. Quality planning specifies how processes and deliverables meet requirements; control measurements demonstrate observed conformance to those requirements.
Question 448
The project team has not approved a broad project-plan change. Available evidence indicates: A regulated software release uses defect counts to prove the product is compliant but has not demonstrated required traceable test coverage. Which evidence best tests the project diagnosis before approving a disruptive change? Select ONE best answer.
- Compare early and late dates, current critical-path activities, float remaining, technical dependencies and risk of overlapping tasks.
- Compare planned test methods, sampling, calibration or audit evidence and actual failure handling against acceptance tolerances.
- Compare the scope statement against WBS coverage, work package descriptions and exclusions to detect omitted deliverables or duplicate branches.
- Calculate each candidate start-to-finish path, compare durations and verify the converging successor begins only after all required predecessors finish.
Explanation
Correct Answer
B:This check evaluates the actual project, quality or delivery decision before a risky project-wide change.
Incorrect Answers
A:Compare early and late dates, current critical-path activities, float remaining, technical dependencies and risk of overlapping tasks. Quality planning specifies how processes and deliverables meet requirements; control measurements demonstrate observed conformance to those requirements.
C:Compare the scope statement against WBS coverage, work package descriptions and exclusions to detect omitted deliverables or duplicate branches. Quality planning specifies how processes and deliverables meet requirements; control measurements demonstrate observed conformance to those requirements.
D:Calculate each candidate start-to-finish path, compare durations and verify the converging successor begins only after all required predecessors finish. Quality planning specifies how processes and deliverables meet requirements; control measurements demonstrate observed conformance to those requirements.
Question 449
A candidate project response has been piloted and stakeholders require a post-change acceptance check. Original problem: A regulated software release uses defect counts to prove the product is compliant but has not demonstrated required traceable test coverage. The accountable project owner requires evidence that outcomes are met without disrupting planned work. Which acceptance result demonstrates that the project response meets the intended outcome? Select ONE best answer.
- The status states SV=-20 for EV80/PV100 or SV=+15 for EV150/PV135 and draws the correct baseline comparison.
- Product measurements and documented controls meet the agreed standard, and deviations have explicit corrective or acceptance decisions.
- Everyone executes one approved baseline set and reports performance against the same current definitions.
- CPI and SPI match the inputs and the narrative distinguishes cost overrun from schedule advancement instead of combining them.
Explanation
Correct Answer
B:Quality planning specifies how processes and deliverables meet requirements; control measurements demonstrate observed conformance to those requirements. The approved implementation step was: Plan prevention and verification methods, measurement thresholds and nonconformance responses, then execute the documented quality controls.
Incorrect Answers
A:The status states SV=-20 for EV80/PV100 or SV=+15 for EV150/PV135 and draws the correct baseline comparison. Quality planning specifies how processes and deliverables meet requirements; control measurements demonstrate observed conformance to those requirements.
C:Everyone executes one approved baseline set and reports performance against the same current definitions. Quality planning specifies how processes and deliverables meet requirements; control measurements demonstrate observed conformance to those requirements.
D:This option addresses a different CAPM project management topic (CPI and SPI index interpretation) rather than the documented Quality management plan and control decision.
Question 450
For an original CAPM project delivery study scenario, consider: A regulated software release uses defect counts to prove the product is compliant but has not demonstrated required traceable test coverage. Select TWO complementary steps: the targeted correction and its strongest prechange validation.
- Delete failed test results and claim an approved quality plan itself proves the output meets every contract tolerance.
- Change: Plan prevention and verification methods, measurement thresholds and nonconformance responses, then execute the documented quality controls.
- Check: Verify EV and PV at the same status date, the units of value and the reported subtraction rather than using actual cost.
- Check: Compare planned test methods, sampling, calibration or audit evidence and actual failure handling against acceptance tolerances.
- Change: Determine the longest dependent path through the activity network and calculate finish time after respecting parallel branches and convergence.
Explanation
Correct Answer
B:Quality planning specifies how processes and deliverables meet requirements; control measurements demonstrate observed conformance to those requirements. Evidence: Compare planned test methods, sampling, calibration or audit evidence and actual failure handling against acceptance tolerances.
D:Quality planning specifies how processes and deliverables meet requirements; control measurements demonstrate observed conformance to those requirements. Required intervention: Plan prevention and verification methods, measurement thresholds and nonconformance responses, then execute the documented quality controls.
Incorrect Answers
A:For this select two assessment, the shortcut changes or bypasses the necessary delivery, governance or operational boundary rather than correcting it.
C:Check: Verify EV and PV at the same status date, the units of value and the reported subtraction rather than using actual cost. Quality planning specifies how processes and deliverables meet requirements; control measurements demonstrate observed conformance to those requirements.
E:Change: Determine the longest dependent path through the activity network and calculate finish time after respecting parallel branches and convergence. Quality planning specifies how processes and deliverables meet requirements; control measurements demonstrate observed conformance to those requirements.