Cisco 350-601 Practice Test 67
Question 660
An MDS SAN has the expected zone database edits but the active zone set remains the old version in the target VSAN. The observed failure is: inactive zone edits cannot authorize new host-target communication in the running fabric. What should the engineer do to recover and validate the service?
- The controlled remediation is to move the target to an arbitrary unrelated VSAN to avoid activation.
- The controlled remediation is to edit interface descriptions and assume they activate zoning automatically.
- The controlled remediation is to delete all existing zones before enabling one new target.
- The controlled remediation is to commit and activate the approved zoneset and verify FCNS discovery and initiator access.
Explanation
Correct Answer
D:Defining a zone is not the same as activating a zoneset that enforces the connectivity policy. Validate against full zoning database, currently active zoneset, VSAN ID and host login visibility.
Incorrect Answers
A:Move the target to an arbitrary unrelated VSAN to avoid activation. This would not reliably restore service after the stated fault. Inactive zone edits cannot authorize new host-target communication in the running fabric. The controlled recovery is to commit and activate the approved zoneset and verify FCNS discovery and initiator access.
B:Edit interface descriptions and assume they activate zoning automatically. This would not reliably restore service after the stated fault. Inactive zone edits cannot authorize new host-target communication in the running fabric. The controlled recovery is to commit and activate the approved zoneset and verify FCNS discovery and initiator access.
C:Delete all existing zones before enabling one new target. This would not reliably restore service after the stated fault. Inactive zone edits cannot authorize new host-target communication in the running fabric. The controlled recovery is to commit and activate the approved zoneset and verify FCNS discovery and initiator access.
Question 661
A storage zone uses an old device alias whose WWPN was replaced during a host migration. Which operator action best meets this technical requirement?
- Update the device alias or zone membership to the verified current WWPN and activate the intended zoneset.
- Rename the alias without verifying the WWPN target it resolves.
- Use the HBA's IP address in place of a Fibre Channel WWPN.
- Add every server port to the zone to avoid maintaining aliases.
Explanation
Correct Answer
A:This directly addresses zoning alias WWPN resolution because wWPN-based zoning must reference the initiator's active identity rather than a historical alias label. Confirm the change against actual HBA WWPN, device-alias resolution, active zone membership and successful target login.
Incorrect Answers
B:Stale aliases can silently deny legitimate initiators even when the SAN links and target are healthy. The relevant correction is to update the device alias or zone membership to the verified current WWPN and activate the intended zoneset.
C:Use the HBA's IP address in place of a Fibre Channel WWPN. The proposed change targets the wrong mechanism or lacks essential validation. WWPN-based zoning must reference the initiator's active identity rather than a historical alias label. Relevant evidence is actual HBA WWPN, device-alias resolution, active zone membership and successful target login.
D:Stale aliases can silently deny legitimate initiators even when the SAN links and target are healthy. The appropriate action remains to update the device alias or zone membership to the verified current WWPN and activate the intended zoneset.
Question 662
A storage zone uses an old device alias whose WWPN was replaced during a host migration. Which collection of observations most directly tests the suspected cause?
- A historical FC topology drawing with no current WWPN or port state.
- Actual HBA WWPN, device-alias resolution, active zone membership and successful target login.
- A storage vendor slogan without the relevant login and path counters.
- A copied zoneset name without its active effective members.
Explanation
Correct Answer
B:These observations test the actual zoning alias WWPN resolution mechanism rather than a superficial management status. WWPN-based zoning must reference the initiator's active identity rather than a historical alias label.
Incorrect Answers
A:This information cannot independently verify zoning alias WWPN resolution. The decisive records instead include actual HBA WWPN, device-alias resolution, active zone membership and successful target login.
C:This information cannot independently verify zoning alias WWPN resolution. WWPN-based zoning must reference the initiator's active identity rather than a historical alias label.
D:This information cannot independently verify zoning alias WWPN resolution. A copied zoneset name without its active effective members.
Question 663
A storage zone uses an old device alias whose WWPN was replaced during a host migration. Which statement most accurately explains this scenario?
- Every storage protocol provides the same file and block semantics.
- Fibre Channel name service entries are identical to host multipath device state.
- WWPN-based zoning must reference the initiator's active identity rather than a historical alias label.
- An unused VSAN number can replace an active zoning or port security rule.
Explanation
Correct Answer
C:Validation depends on actual HBA WWPN, device-alias resolution, active zone membership and successful target login. This explains why the most appropriate response is to update the device alias or zone membership to the verified current WWPN and activate the intended zoneset.
Incorrect Answers
A:Every storage protocol provides the same file and block semantics. This is an incorrect generalization for zoning alias WWPN resolution. The applicable technical behavior is that wWPN-based zoning must reference the initiator's active identity rather than a historical alias label. The operator should verify actual HBA WWPN, device-alias resolution, active zone membership and successful target login.
B:Fibre Channel name service entries are identical to host multipath device state. This is an incorrect generalization for zoning alias WWPN resolution. The applicable technical behavior is that wWPN-based zoning must reference the initiator's active identity rather than a historical alias label. The operator should verify actual HBA WWPN, device-alias resolution, active zone membership and successful target login.
D:An unused VSAN number can replace an active zoning or port security rule. This is an incorrect generalization for zoning alias WWPN resolution. The applicable technical behavior is that wWPN-based zoning must reference the initiator's active identity rather than a historical alias label. The operator should verify actual HBA WWPN, device-alias resolution, active zone membership and successful target login.
Question 664
A storage zone uses an old device alias whose WWPN was replaced during a host migration. Assume an engineer instead chooses to rename the alias without verifying the WWPN target it resolves. What is the principal technical consequence of the mistaken choice?
- The sole error was using a verified SAN maintenance window for a risky operation.
- Inspecting credit counters prevents FC frames from forwarding.
- A well-documented host multipath test is the source of the original fabric fault.
- Stale aliases can silently deny legitimate initiators even when the SAN links and target are healthy.
Explanation
Correct Answer
D:The proper corrective action is to update the device alias or zone membership to the verified current WWPN and activate the intended zoneset. WWPN-based zoning must reference the initiator's active identity rather than a historical alias label.
Incorrect Answers
A:This does not explain the actual zoning alias WWPN resolution defect after the shortcut. The meaningful failure is that stale aliases can silently deny legitimate initiators even when the SAN links and target are healthy.
B:This does not explain the actual zoning alias WWPN resolution defect after the shortcut. The relevant evidence is actual HBA WWPN, device-alias resolution, active zone membership and successful target login.
C:This does not explain the actual zoning alias WWPN resolution defect after the shortcut. A well-documented host multipath test is the source of the original fabric fault.
Question 665
A storage zone uses an old device alias whose WWPN was replaced during a host migration. The observed failure is: stale aliases can silently deny legitimate initiators even when the SAN links and target are healthy. What should the engineer do to recover and validate the service?
- Correct identity mapping, reactivate the required zone policy and confirm host LUN discovery.
- Use the HBA's IP address in place of a Fibre Channel WWPN.
- Add every server port to the zone to avoid maintaining aliases.
- Rename the alias without verifying the WWPN target it resolves.
Explanation
Correct Answer
A:This addresses the observable fault while preserving a check of the expected result. WWPN-based zoning must reference the initiator's active identity rather than a historical alias label.
Incorrect Answers
B:Use the HBA's IP address in place of a Fibre Channel WWPN. This would not reliably restore service after the stated fault. Stale aliases can silently deny legitimate initiators even when the SAN links and target are healthy. The controlled recovery is to correct identity mapping, reactivate the required zone policy and confirm host LUN discovery.
C:Add every server port to the zone to avoid maintaining aliases. This would not reliably restore service after the stated fault. Stale aliases can silently deny legitimate initiators even when the SAN links and target are healthy. The controlled recovery is to correct identity mapping, reactivate the required zone policy and confirm host LUN discovery.
D:Rename the alias without verifying the WWPN target it resolves. This would not reliably restore service after the stated fault. Stale aliases can silently deny legitimate initiators even when the SAN links and target are healthy. The controlled recovery is to correct identity mapping, reactivate the required zone policy and confirm host LUN discovery.
Question 666
A server vHBA receives a new WWPN from its identity pool, but the active MDS zone continues referencing the prior initiator identity. Which next step should the data center engineer select?
- On this affected device, the engineer should use the HBA's IP address in place of a Fibre Channel WWPN.
- On this affected device, the engineer should update the device alias or zone membership to the verified current WWPN and activate the intended zoneset.
- On this affected device, the engineer should add every server port to the zone to avoid maintaining aliases.
- On this affected device, the engineer should rename the alias without verifying the WWPN target it resolves.
Explanation
Correct Answer
B:This directly addresses zoning alias WWPN resolution because wWPN-based zoning must reference the initiator's active identity rather than a historical alias label.
Incorrect Answers
A:Use the HBA's IP address in place of a Fibre Channel WWPN. The proposed change targets the wrong mechanism or lacks essential validation. WWPN-based zoning must reference the initiator's active identity rather than a historical alias label. Relevant evidence is actual HBA WWPN, device-alias resolution, active zone membership and successful target login.
C:Stale aliases can silently deny legitimate initiators even when the SAN links and target are healthy. In the given case, a server vHBA receives a new WWPN from its identity pool, but the active MDS zone continues referencing the prior initiator identity.
D:Stale aliases can silently deny legitimate initiators even when the SAN links and target are healthy. Rename the alias without verifying the WWPN target it resolves.
Question 667
A server vHBA receives a new WWPN from its identity pool, but the active MDS zone continues referencing the prior initiator identity. Which diagnostic record would most strongly confirm the result?
- For this deployment, examine a green physical FC link light without fabric login, zoning or I/O evidence.
- For this deployment, examine a historical FC topology drawing with no current WWPN or port state.
- For this deployment, examine actual HBA WWPN, device-alias resolution, active zone membership and successful target login.
- For this deployment, examine a storage vendor slogan without the relevant login and path counters.
Explanation
Correct Answer
C:These observations test the actual zoning alias WWPN resolution mechanism rather than a superficial management status. They should be checked after update the device alias or zone membership to the verified current WWPN and activate the intended zoneset.
Incorrect Answers
A:This information cannot independently verify zoning alias WWPN resolution. A green physical FC link light without fabric login, zoning or I/O evidence.
B:This information cannot independently verify zoning alias WWPN resolution. In the given case, a server vHBA receives a new WWPN from its identity pool, but the active MDS zone continues referencing the prior initiator identity.
D:This information cannot independently verify zoning alias WWPN resolution. A storage vendor slogan without the relevant login and path counters.
Question 668
A server vHBA receives a new WWPN from its identity pool, but the active MDS zone continues referencing the prior initiator identity. Which platform concept should guide the engineer’s assessment?
- For this condition, the applicable principle is that an unused VSAN number can replace an active zoning or port security rule.
- For this condition, the applicable principle is that every storage protocol provides the same file and block semantics.
- For this condition, the applicable principle is that a lit Fibre Channel link proves end-to-end LUN visibility and authorized I/O.
- For this condition, the applicable principle is that wWPN-based zoning must reference the initiator's active identity rather than a historical alias label.
Explanation
Correct Answer
D:Validation depends on actual HBA WWPN, device-alias resolution, active zone membership and successful target login.
Incorrect Answers
A:An unused VSAN number can replace an active zoning or port security rule. This is an incorrect generalization for zoning alias WWPN resolution. The applicable technical behavior is that wWPN-based zoning must reference the initiator's active identity rather than a historical alias label. The operator should verify actual HBA WWPN, device-alias resolution, active zone membership and successful target login.
B:Every storage protocol provides the same file and block semantics. This is an incorrect generalization for zoning alias WWPN resolution. The applicable technical behavior is that wWPN-based zoning must reference the initiator's active identity rather than a historical alias label. The operator should verify actual HBA WWPN, device-alias resolution, active zone membership and successful target login.
C:A lit Fibre Channel link proves end-to-end LUN visibility and authorized I/O. This is an incorrect generalization for zoning alias WWPN resolution. The applicable technical behavior is that wWPN-based zoning must reference the initiator's active identity rather than a historical alias label. The operator should verify actual HBA WWPN, device-alias resolution, active zone membership and successful target login.
Question 669
A server vHBA receives a new WWPN from its identity pool, but the active MDS zone continues referencing the prior initiator identity. Assume an engineer instead chooses to rename the alias without verifying the WWPN target it resolves. Which root-cause observation follows from that incorrect change?
- The resulting defect is that stale aliases can silently deny legitimate initiators even when the SAN links and target are healthy.
- The resulting defect is that a well-documented host multipath test is the source of the original fabric fault.
- The resulting defect is that examining FCNS entries automatically removes the authorized zoning policy.
- The resulting defect is that inspecting credit counters prevents FC frames from forwarding.
Explanation
Correct Answer
A:The proper corrective action is to update the device alias or zone membership to the verified current WWPN and activate the intended zoneset. That is the direct consequence of choosing the misleading shortcut.
Incorrect Answers
B:This does not explain the actual zoning alias WWPN resolution defect after the shortcut. In the given case, a server vHBA receives a new WWPN from its identity pool, but the active MDS zone continues referencing the prior initiator identity.
C:This does not explain the actual zoning alias WWPN resolution defect after the shortcut. Examining FCNS entries automatically removes the authorized zoning policy.
D:The meaningful failure is that stale aliases can silently deny legitimate initiators even when the SAN links and target are healthy.
Question 670
A server vHBA receives a new WWPN from its identity pool, but the active MDS zone continues referencing the prior initiator identity. The observed failure is: stale aliases can silently deny legitimate initiators even when the SAN links and target are healthy. Which recovery action addresses the underlying technical fault?
- The controlled remediation is to add every server port to the zone to avoid maintaining aliases.
- The controlled remediation is to correct identity mapping, reactivate the required zone policy and confirm host LUN discovery.
- The controlled remediation is to rename the alias without verifying the WWPN target it resolves.
- The controlled remediation is to use the HBA's IP address in place of a Fibre Channel WWPN.
Explanation
Correct Answer
B:This addresses the observable fault while preserving a check of the expected result. Validate against actual HBA WWPN, device-alias resolution, active zone membership and successful target login.
Incorrect Answers
A:Add every server port to the zone to avoid maintaining aliases. This would not reliably restore service after the stated fault. Stale aliases can silently deny legitimate initiators even when the SAN links and target are healthy. The controlled recovery is to correct identity mapping, reactivate the required zone policy and confirm host LUN discovery.
C:Rename the alias without verifying the WWPN target it resolves. This would not reliably restore service after the stated fault. Stale aliases can silently deny legitimate initiators even when the SAN links and target are healthy. The controlled recovery is to correct identity mapping, reactivate the required zone policy and confirm host LUN discovery.
D:Use the HBA's IP address in place of a Fibre Channel WWPN. This would not reliably restore service after the stated fault. Stale aliases can silently deny legitimate initiators even when the SAN links and target are healthy. The controlled recovery is to correct identity mapping, reactivate the required zone policy and confirm host LUN discovery.