Cisco 350-601 Practice Test 117
Question 1160
An approved host replacement cannot log in because its new initiator WWPN is not present in the FC port-security database. The observed failure is: a stale binding denies a legitimate replacement, while absent policy can admit unauthorized initiators. What is the BEST controlled recovery once this failure is recognized?
- The controlled remediation is to assume Ethernet DAI provides Fibre Channel port security.
- The controlled remediation is to disable all fabric security checks when replacing one HBA.
- The controlled remediation is to set every WWPN binding to a wildcard on all switch ports.
- The controlled remediation is to update the authorized binding and confirm legitimate logins while unknown WWPNs are denied.
Explanation
Correct Answer
D:FC port security restricts which devices may log into specified ports based on approved identities. Validate against port security binding database, port WWPN login attempts, violations and permitted host registration.
Incorrect Answers
A:Assume Ethernet DAI provides Fibre Channel port security. This would not reliably restore service after the stated fault. A stale binding denies a legitimate replacement, while absent policy can admit unauthorized initiators. The controlled recovery is to update the authorized binding and confirm legitimate logins while unknown WWPNs are denied.
B:Disable all fabric security checks when replacing one HBA. This would not reliably restore service after the stated fault. A stale binding denies a legitimate replacement, while absent policy can admit unauthorized initiators. The controlled recovery is to update the authorized binding and confirm legitimate logins while unknown WWPNs are denied.
C:Set every WWPN binding to a wildcard on all switch ports. This would not reliably restore service after the stated fault. A stale binding denies a legitimate replacement, while absent policy can admit unauthorized initiators. The controlled recovery is to update the authorized binding and confirm legitimate logins while unknown WWPNs are denied.
Question 1161
An unauthorized SAN switch attempts to join a fabric ISL and the existing fabric accepts it without peer identity restrictions. What is the BEST supported implementation or corrective action?
- Configure and maintain supported MDS fabric-binding allowed peer switch identities.
- Use a server's DHCP snooping binding to authorize an MDS E-port.
- Disable switch peer validation because all devices are in one rack.
- Enter a random user-friendly switch name without verifying the peer WWN.
Explanation
Correct Answer
A:This directly addresses Fibre Channel fabric binding because fabric binding restricts which peer switches may join a protected Fibre Channel fabric. Confirm the change against fabric binding database, neighboring switch WWN, E-port login and allowed or denied ISL records.
Incorrect Answers
B:Outdated authorized-peer records block legitimate replacements, while missing restrictions can admit unknown peers. The relevant correction is to configure and maintain supported MDS fabric-binding allowed peer switch identities.
C:Disable switch peer validation because all devices are in one rack. The proposed change targets the wrong mechanism or lacks essential validation. Fabric binding restricts which peer switches may join a protected Fibre Channel fabric. Relevant evidence is fabric binding database, neighboring switch WWN, E-port login and allowed or denied ISL records.
D:Outdated authorized-peer records block legitimate replacements, while missing restrictions can admit unknown peers. The appropriate action remains to configure and maintain supported MDS fabric-binding allowed peer switch identities.
Question 1162
An unauthorized SAN switch attempts to join a fabric ISL and the existing fabric accepts it without peer identity restrictions. Which evidence BEST verifies the intended technical behavior?
- An old role mapping that ignores the observed denial or unwanted permission.
- Fabric binding database, neighboring switch WWN, E-port login and allowed or denied ISL records.
- A green link LED without confirming authentication, inspection or encryption state.
- A signed design diagram that lacks current access-policy or violation counters.
Explanation
Correct Answer
B:These observations test the actual Fibre Channel fabric binding mechanism rather than a superficial management status. Fabric binding restricts which peer switches may join a protected Fibre Channel fabric.
Incorrect Answers
A:This information cannot independently verify Fibre Channel fabric binding. The decisive records instead include fabric binding database, neighboring switch WWN, E-port login and allowed or denied ISL records.
C:This information cannot independently verify Fibre Channel fabric binding. Fabric binding restricts which peer switches may join a protected Fibre Channel fabric.
D:This information cannot independently verify Fibre Channel fabric binding. A signed design diagram that lacks current access-policy or violation counters.
Question 1163
An unauthorized SAN switch attempts to join a fabric ISL and the existing fabric accepts it without peer identity restrictions. Which principle BEST explains why the recommended solution is appropriate?
- One security mechanism always replaces all other layer-specific access controls.
- All traffic within a VLAN is necessarily authorized regardless of identity or policy.
- Fabric binding restricts which peer switches may join a protected Fibre Channel fabric.
- A recognized device name establishes authentication and trust without checking keys.
Explanation
Correct Answer
C:Validation depends on fabric binding database, neighboring switch WWN, E-port login and allowed or denied ISL records. This explains why the most appropriate response is to configure and maintain supported MDS fabric-binding allowed peer switch identities.
Incorrect Answers
A:One security mechanism always replaces all other layer-specific access controls. This is an incorrect generalization for Fibre Channel fabric binding. The applicable technical behavior is that fabric binding restricts which peer switches may join a protected Fibre Channel fabric. The operator should verify fabric binding database, neighboring switch WWN, E-port login and allowed or denied ISL records.
B:All traffic within a VLAN is necessarily authorized regardless of identity or policy. This is an incorrect generalization for Fibre Channel fabric binding. The applicable technical behavior is that fabric binding restricts which peer switches may join a protected Fibre Channel fabric. The operator should verify fabric binding database, neighboring switch WWN, E-port login and allowed or denied ISL records.
D:A recognized device name establishes authentication and trust without checking keys. This is an incorrect generalization for Fibre Channel fabric binding. The applicable technical behavior is that fabric binding restricts which peer switches may join a protected Fibre Channel fabric. The operator should verify fabric binding database, neighboring switch WWN, E-port login and allowed or denied ISL records.
Question 1164
An unauthorized SAN switch attempts to join a fabric ISL and the existing fabric accepts it without peer identity restrictions. Assume an engineer instead chooses to use a server's DHCP snooping binding to authorize an MDS E-port. What is the MOST significant failure introduced by that shortcut?
- Reviewing an ACI contract causes the pre-existing permit rule to vanish.
- Testing one denied unauthorized connection proves the policy was absent.
- A correctly scoped role assignment is the source of the earlier over-privilege.
- Outdated authorized-peer records block legitimate replacements, while missing restrictions can admit unknown peers.
Explanation
Correct Answer
D:The proper corrective action is to configure and maintain supported MDS fabric-binding allowed peer switch identities. That is the direct consequence of choosing the misleading shortcut.
Incorrect Answers
A:This does not explain the actual Fibre Channel fabric binding defect after the shortcut. The meaningful failure is that outdated authorized-peer records block legitimate replacements, while missing restrictions can admit unknown peers.
B:This does not explain the actual Fibre Channel fabric binding defect after the shortcut. The relevant evidence is fabric binding database, neighboring switch WWN, E-port login and allowed or denied ISL records.
C:This does not explain the actual Fibre Channel fabric binding defect after the shortcut. In the given case, an unauthorized SAN switch attempts to join a fabric ISL and the existing fabric accepts it without peer identity restrictions.
Question 1165
An unauthorized SAN switch attempts to join a fabric ISL and the existing fabric accepts it without peer identity restrictions. The observed failure is: outdated authorized-peer records block legitimate replacements, while missing restrictions can admit unknown peers. What is the BEST controlled recovery once this failure is recognized?
- Update validated peer identity and verify accepted sanctioned ISLs and rejected unknown switches.
- Disable switch peer validation because all devices are in one rack.
- Enter a random user-friendly switch name without verifying the peer WWN.
- Use a server's DHCP snooping binding to authorize an MDS E-port.
Explanation
Correct Answer
A:Validate against fabric binding database, neighboring switch WWN, E-port login and allowed or denied ISL records. This addresses the observable fault while preserving a check of the expected result.
Incorrect Answers
B:Disable switch peer validation because all devices are in one rack. This would not reliably restore service after the stated fault. Outdated authorized-peer records block legitimate replacements, while missing restrictions can admit unknown peers. The controlled recovery is to update validated peer identity and verify accepted sanctioned ISLs and rejected unknown switches.
C:Enter a random user-friendly switch name without verifying the peer WWN. This would not reliably restore service after the stated fault. Outdated authorized-peer records block legitimate replacements, while missing restrictions can admit unknown peers. The controlled recovery is to update validated peer identity and verify accepted sanctioned ISLs and rejected unknown switches.
D:Use a server's DHCP snooping binding to authorize an MDS E-port. This would not reliably restore service after the stated fault. Outdated authorized-peer records block legitimate replacements, while missing restrictions can admit unknown peers. The controlled recovery is to update validated peer identity and verify accepted sanctioned ISLs and rejected unknown switches.
Question 1166
A planned MDS switch replacement fails to form an ISL because fabric binding still references the old peer WWN. Which configuration decision MOST directly resolves the issue?
- On this affected device, the engineer should disable switch peer validation because all devices are in one rack.
- On this affected device, the engineer should configure and maintain supported MDS fabric-binding allowed peer switch identities.
- On this affected device, the engineer should enter a random user-friendly switch name without verifying the peer WWN.
- On this affected device, the engineer should use a server's DHCP snooping binding to authorize an MDS E-port.
Explanation
Correct Answer
B:This directly addresses Fibre Channel fabric binding because fabric binding restricts which peer switches may join a protected Fibre Channel fabric.
Incorrect Answers
A:Disable switch peer validation because all devices are in one rack. The proposed change targets the wrong mechanism or lacks essential validation. Fabric binding restricts which peer switches may join a protected Fibre Channel fabric. Relevant evidence is fabric binding database, neighboring switch WWN, E-port login and allowed or denied ISL records.
C:Outdated authorized-peer records block legitimate replacements, while missing restrictions can admit unknown peers. Enter a random user-friendly switch name without verifying the peer WWN.
D:Outdated authorized-peer records block legitimate replacements, while missing restrictions can admit unknown peers. In the given case, a planned MDS switch replacement fails to form an ISL because fabric binding still references the old peer WWN.
Question 1167
A planned MDS switch replacement fails to form an ISL because fabric binding still references the old peer WWN. What should the engineer inspect to confirm the actual state?
- For this deployment, examine a user account name without the effective role or security enforcement record.
- For this deployment, examine an old role mapping that ignores the observed denial or unwanted permission.
- For this deployment, examine fabric binding database, neighboring switch WWN, E-port login and allowed or denied ISL records.
- For this deployment, examine a green link LED without confirming authentication, inspection or encryption state.
Explanation
Correct Answer
C:These observations test the actual Fibre Channel fabric binding mechanism rather than a superficial management status. They should be checked after configure and maintain supported MDS fabric-binding allowed peer switch identities.
Incorrect Answers
A:This information cannot independently verify Fibre Channel fabric binding. A user account name without the effective role or security enforcement record.
B:This information cannot independently verify Fibre Channel fabric binding. In the given case, a planned MDS switch replacement fails to form an ISL because fabric binding still references the old peer WWN.
D:This information cannot independently verify Fibre Channel fabric binding. A green link LED without confirming authentication, inspection or encryption state.
Question 1168
A planned MDS switch replacement fails to form an ISL because fabric binding still references the old peer WWN. What technical behavior underlies the correct decision?
- For this condition, the applicable principle is that a recognized device name establishes authentication and trust without checking keys.
- For this condition, the applicable principle is that one security mechanism always replaces all other layer-specific access controls.
- For this condition, the applicable principle is that successful login automatically grants every management privilege.
- For this condition, the applicable principle is that fabric binding restricts which peer switches may join a protected Fibre Channel fabric.
Explanation
Correct Answer
D:Validation depends on fabric binding database, neighboring switch WWN, E-port login and allowed or denied ISL records.
Incorrect Answers
A:A recognized device name establishes authentication and trust without checking keys. This is an incorrect generalization for Fibre Channel fabric binding. The applicable technical behavior is that fabric binding restricts which peer switches may join a protected Fibre Channel fabric. The operator should verify fabric binding database, neighboring switch WWN, E-port login and allowed or denied ISL records.
B:One security mechanism always replaces all other layer-specific access controls. This is an incorrect generalization for Fibre Channel fabric binding. The applicable technical behavior is that fabric binding restricts which peer switches may join a protected Fibre Channel fabric. The operator should verify fabric binding database, neighboring switch WWN, E-port login and allowed or denied ISL records.
C:Successful login automatically grants every management privilege. This is an incorrect generalization for Fibre Channel fabric binding. The applicable technical behavior is that fabric binding restricts which peer switches may join a protected Fibre Channel fabric. The operator should verify fabric binding database, neighboring switch WWN, E-port login and allowed or denied ISL records.
Question 1169
A planned MDS switch replacement fails to form an ISL because fabric binding still references the old peer WWN. Assume an engineer instead chooses to use a server's DHCP snooping binding to authorize an MDS E-port. Which resulting risk or fault should the reviewer identify?
- The resulting defect is that outdated authorized-peer records block legitimate replacements, while missing restrictions can admit unknown peers.
- The resulting defect is that a correctly scoped role assignment is the source of the earlier over-privilege.
- The resulting defect is that auditing administrative actions is the cause of the initial unauthorized access.
- The resulting defect is that testing one denied unauthorized connection proves the policy was absent.
Explanation
Correct Answer
A:The proper corrective action is to configure and maintain supported MDS fabric-binding allowed peer switch identities. Fabric binding restricts which peer switches may join a protected Fibre Channel fabric.
Incorrect Answers
B:This does not explain the actual Fibre Channel fabric binding defect after the shortcut. In the given case, a planned MDS switch replacement fails to form an ISL because fabric binding still references the old peer WWN.
C:This does not explain the actual Fibre Channel fabric binding defect after the shortcut. Auditing administrative actions is the cause of the initial unauthorized access.
D:This does not explain the actual Fibre Channel fabric binding defect after the shortcut. Testing one denied unauthorized connection proves the policy was absent.
Question 1170
A planned MDS switch replacement fails to form an ISL because fabric binding still references the old peer WWN. The observed failure is: outdated authorized-peer records block legitimate replacements, while missing restrictions can admit unknown peers. Which remediation most directly restores the intended behavior?
- The controlled remediation is to enter a random user-friendly switch name without verifying the peer WWN.
- The controlled remediation is to update validated peer identity and verify accepted sanctioned ISLs and rejected unknown switches.
- The controlled remediation is to use a server's DHCP snooping binding to authorize an MDS E-port.
- The controlled remediation is to disable switch peer validation because all devices are in one rack.
Explanation
Correct Answer
B:Validate against fabric binding database, neighboring switch WWN, E-port login and allowed or denied ISL records. Fabric binding restricts which peer switches may join a protected Fibre Channel fabric.
Incorrect Answers
A:Enter a random user-friendly switch name without verifying the peer WWN. This would not reliably restore service after the stated fault. Outdated authorized-peer records block legitimate replacements, while missing restrictions can admit unknown peers. The controlled recovery is to update validated peer identity and verify accepted sanctioned ISLs and rejected unknown switches.
C:Use a server's DHCP snooping binding to authorize an MDS E-port. This would not reliably restore service after the stated fault. Outdated authorized-peer records block legitimate replacements, while missing restrictions can admit unknown peers. The controlled recovery is to update validated peer identity and verify accepted sanctioned ISLs and rejected unknown switches.
D:Disable switch peer validation because all devices are in one rack. This would not reliably restore service after the stated fault. Outdated authorized-peer records block legitimate replacements, while missing restrictions can admit unknown peers. The controlled recovery is to update validated peer identity and verify accepted sanctioned ISLs and rejected unknown switches.