Cisco 350-601 Practice Test 11
Question 100
A shared VLAN's HSRP active device loses its routed uplink yet retains the virtual gateway role and blackholes hosts. The observed failure is: without tracking, an active gateway can continue attracting traffic despite loss of essential upstream reachability. What should the engineer do to recover and validate the service?
- The controlled remediation is to give both physical routers the exact same unique management address.
- The controlled remediation is to modify the hosts' DNS suffix to influence FHRP elections.
- The controlled remediation is to disable FHRP on both devices during normal production.
- The controlled remediation is to repair tracking and election policy, simulate controlled uplink failure, and validate gateway continuity.
Explanation
Correct Answer
D:Validate against fHRP active and standby states, tracked-object status, priority changes, and host default-gateway reachability. First-hop redundancy requires a health-aware election so the reachable device carries the virtual gateway.
Incorrect Answers
A:Give both physical routers the exact same unique management address. This would not reliably restore service after the stated fault. Without tracking, an active gateway can continue attracting traffic despite loss of essential upstream reachability. The controlled recovery is to repair tracking and election policy, simulate controlled uplink failure, and validate gateway continuity.
B:Modify the hosts' DNS suffix to influence FHRP elections. This would not reliably restore service after the stated fault. Without tracking, an active gateway can continue attracting traffic despite loss of essential upstream reachability. The controlled recovery is to repair tracking and election policy, simulate controlled uplink failure, and validate gateway continuity.
C:Disable FHRP on both devices during normal production. This would not reliably restore service after the stated fault. Without tracking, an active gateway can continue attracting traffic despite loss of essential upstream reachability. The controlled recovery is to repair tracking and election policy, simulate controlled uplink failure, and validate gateway continuity.
Question 101
An access switch wins spanning-tree root unexpectedly and produces long paths through a low-bandwidth server-row link. Which operator action best meets this technical requirement?
- Set deterministic bridge priorities on the designated root and secondary switches and inspect path selection.
- Disable spanning tree on all participating VLANs to force faster convergence.
- Change switch hostnames to influence root election directly.
- Insert static host routes to control Ethernet BPDU processing.
Explanation
Correct Answer
A:This directly addresses rSTP topology root selection because rSTP chooses its root using bridge identifiers and computes roles to avoid Layer 2 loops. Confirm the change against rSTP root bridge ID, root-port roles, topology-change counts, and loop-free forwarding path.
Incorrect Answers
B:Uncontrolled root election can redirect traffic and create unstable or suboptimal Layer 2 forwarding. The relevant correction is to set deterministic bridge priorities on the designated root and secondary switches and inspect path selection.
C:Change switch hostnames to influence root election directly. The proposed change targets the wrong mechanism or lacks essential validation. RSTP chooses its root using bridge identifiers and computes roles to avoid Layer 2 loops. Relevant evidence is rSTP root bridge ID, root-port roles, topology-change counts, and loop-free forwarding path.
D:Uncontrolled root election can redirect traffic and create unstable or suboptimal Layer 2 forwarding. The appropriate action remains to set deterministic bridge priorities on the designated root and secondary switches and inspect path selection.
Question 102
An access switch wins spanning-tree root unexpectedly and produces long paths through a low-bandwidth server-row link. Which collection of observations most directly tests the suspected cause?
- A pre-change network diagram with no live control-plane state.
- RSTP root bridge ID, root-port roles, topology-change counts, and loop-free forwarding path.
- A healthy optical light without checking protocol neighbors or forwarding entries.
- An up management interface without the relevant routing or forwarding table.
Explanation
Correct Answer
B:These observations test the actual rSTP topology root selection mechanism rather than a superficial management status. RSTP chooses its root using bridge identifiers and computes roles to avoid Layer 2 loops.
Incorrect Answers
A:This information cannot independently verify rSTP topology root selection. The decisive records instead include rSTP root bridge ID, root-port roles, topology-change counts, and loop-free forwarding path.
C:This information cannot independently verify rSTP topology root selection. RSTP chooses its root using bridge identifiers and computes roles to avoid Layer 2 loops.
D:This information cannot independently verify rSTP topology root selection. An up management interface without the relevant routing or forwarding table.
Question 103
An access switch wins spanning-tree root unexpectedly and produces long paths through a low-bandwidth server-row link. Which statement most accurately explains this scenario?
- All control-plane protocols exchange state automatically after a cable is inserted.
- Physical link carrier guarantees all overlay and routing states are correct.
- RSTP chooses its root using bridge identifiers and computes roles to avoid Layer 2 loops.
- A working management-plane ping proves every tenant and application path is healthy.
Explanation
Correct Answer
C:Validation depends on rSTP root bridge ID, root-port roles, topology-change counts, and loop-free forwarding path. This explains why the most appropriate response is to set deterministic bridge priorities on the designated root and secondary switches and inspect path selection.
Incorrect Answers
A:All control-plane protocols exchange state automatically after a cable is inserted. This is an incorrect generalization for rSTP topology root selection. The applicable technical behavior is that rSTP chooses its root using bridge identifiers and computes roles to avoid Layer 2 loops. The operator should verify rSTP root bridge ID, root-port roles, topology-change counts, and loop-free forwarding path.
B:Physical link carrier guarantees all overlay and routing states are correct. This is an incorrect generalization for rSTP topology root selection. The applicable technical behavior is that rSTP chooses its root using bridge identifiers and computes roles to avoid Layer 2 loops. The operator should verify rSTP root bridge ID, root-port roles, topology-change counts, and loop-free forwarding path.
D:A working management-plane ping proves every tenant and application path is healthy. This is an incorrect generalization for rSTP topology root selection. The applicable technical behavior is that rSTP chooses its root using bridge identifiers and computes roles to avoid Layer 2 loops. The operator should verify rSTP root bridge ID, root-port roles, topology-change counts, and loop-free forwarding path.
Question 104
An access switch wins spanning-tree root unexpectedly and produces long paths through a low-bandwidth server-row link. Assume an engineer instead chooses to disable spanning tree on all participating VLANs to force faster convergence. What is the principal technical consequence of the mistaken choice?
- Preserving neighbor-state evidence is itself the source of the observed outage.
- Investigating the forwarding table is the reason a broken route cannot converge.
- The only consequence of the wrong change is a different device description.
- Uncontrolled root election can redirect traffic and create unstable or suboptimal Layer 2 forwarding.
Explanation
Correct Answer
D:RSTP chooses its root using bridge identifiers and computes roles to avoid Layer 2 loops. That is the direct consequence of choosing the misleading shortcut.
Incorrect Answers
A:This does not explain the actual rSTP topology root selection defect after the shortcut. The meaningful failure is that uncontrolled root election can redirect traffic and create unstable or suboptimal Layer 2 forwarding.
B:This does not explain the actual rSTP topology root selection defect after the shortcut. The relevant evidence is rSTP root bridge ID, root-port roles, topology-change counts, and loop-free forwarding path.
C:This does not explain the actual rSTP topology root selection defect after the shortcut. The only consequence of the wrong change is a different device description.
Question 105
An access switch wins spanning-tree root unexpectedly and produces long paths through a low-bandwidth server-row link. The observed failure is: uncontrolled root election can redirect traffic and create unstable or suboptimal Layer 2 forwarding. What should the engineer do to recover and validate the service?
- Restore the intended root hierarchy and verify port roles without disrupting required connectivity.
- Change switch hostnames to influence root election directly.
- Insert static host routes to control Ethernet BPDU processing.
- Disable spanning tree on all participating VLANs to force faster convergence.
Explanation
Correct Answer
A:RSTP chooses its root using bridge identifiers and computes roles to avoid Layer 2 loops. This addresses the observable fault while preserving a check of the expected result.
Incorrect Answers
B:Change switch hostnames to influence root election directly. This would not reliably restore service after the stated fault. Uncontrolled root election can redirect traffic and create unstable or suboptimal Layer 2 forwarding. The controlled recovery is to restore the intended root hierarchy and verify port roles without disrupting required connectivity.
C:Insert static host routes to control Ethernet BPDU processing. This would not reliably restore service after the stated fault. Uncontrolled root election can redirect traffic and create unstable or suboptimal Layer 2 forwarding. The controlled recovery is to restore the intended root hierarchy and verify port roles without disrupting required connectivity.
D:Disable spanning tree on all participating VLANs to force faster convergence. This would not reliably restore service after the stated fault. Uncontrolled root election can redirect traffic and create unstable or suboptimal Layer 2 forwarding. The controlled recovery is to restore the intended root hierarchy and verify port roles without disrupting required connectivity.
Question 106
A leaf migration changes STP priority and shifts the root bridge away from the intended distribution pair. Which next step should the data center engineer select?
- On this affected device, the engineer should change switch hostnames to influence root election directly.
- On this affected device, the engineer should set deterministic bridge priorities on the designated root and secondary switches and inspect path selection.
- On this affected device, the engineer should insert static host routes to control Ethernet BPDU processing.
- On this affected device, the engineer should disable spanning tree on all participating VLANs to force faster convergence.
Explanation
Correct Answer
B:This directly addresses rSTP topology root selection because rSTP chooses its root using bridge identifiers and computes roles to avoid Layer 2 loops.
Incorrect Answers
A:Change switch hostnames to influence root election directly. The proposed change targets the wrong mechanism or lacks essential validation. RSTP chooses its root using bridge identifiers and computes roles to avoid Layer 2 loops. Relevant evidence is rSTP root bridge ID, root-port roles, topology-change counts, and loop-free forwarding path.
C:Uncontrolled root election can redirect traffic and create unstable or suboptimal Layer 2 forwarding. Insert static host routes to control Ethernet BPDU processing.
D:Uncontrolled root election can redirect traffic and create unstable or suboptimal Layer 2 forwarding.
Question 107
A leaf migration changes STP priority and shifts the root bridge away from the intended distribution pair. Which diagnostic record would most strongly confirm the result?
- For this deployment, examine one successful ping to an unrelated management address.
- For this deployment, examine a pre-change network diagram with no live control-plane state.
- For this deployment, examine rSTP root bridge ID, root-port roles, topology-change counts, and loop-free forwarding path.
- For this deployment, examine a healthy optical light without checking protocol neighbors or forwarding entries.
Explanation
Correct Answer
C:These observations test the actual rSTP topology root selection mechanism rather than a superficial management status. They should be checked after set deterministic bridge priorities on the designated root and secondary switches and inspect path selection.
Incorrect Answers
A:This information cannot independently verify rSTP topology root selection. In the given case, a leaf migration changes STP priority and shifts the root bridge away from the intended distribution pair.
B:This information cannot independently verify rSTP topology root selection. A pre-change network diagram with no live control-plane state.
D:This information cannot independently verify rSTP topology root selection. A healthy optical light without checking protocol neighbors or forwarding entries.
Question 108
A leaf migration changes STP priority and shifts the root bridge away from the intended distribution pair. Which platform concept should guide the engineer’s assessment?
- For this condition, the applicable principle is that a working management-plane ping proves every tenant and application path is healthy.
- For this condition, the applicable principle is that all control-plane protocols exchange state automatically after a cable is inserted.
- For this condition, the applicable principle is that configuration differences between peer switches cannot affect network traffic.
- For this condition, the applicable principle is that rSTP chooses its root using bridge identifiers and computes roles to avoid Layer 2 loops.
Explanation
Correct Answer
D:Validation depends on rSTP root bridge ID, root-port roles, topology-change counts, and loop-free forwarding path.
Incorrect Answers
A:A working management-plane ping proves every tenant and application path is healthy. This is an incorrect generalization for rSTP topology root selection. The applicable technical behavior is that rSTP chooses its root using bridge identifiers and computes roles to avoid Layer 2 loops. The operator should verify rSTP root bridge ID, root-port roles, topology-change counts, and loop-free forwarding path.
B:All control-plane protocols exchange state automatically after a cable is inserted. This is an incorrect generalization for rSTP topology root selection. The applicable technical behavior is that rSTP chooses its root using bridge identifiers and computes roles to avoid Layer 2 loops. The operator should verify rSTP root bridge ID, root-port roles, topology-change counts, and loop-free forwarding path.
C:Configuration differences between peer switches cannot affect network traffic. This is an incorrect generalization for rSTP topology root selection. The applicable technical behavior is that rSTP chooses its root using bridge identifiers and computes roles to avoid Layer 2 loops. The operator should verify rSTP root bridge ID, root-port roles, topology-change counts, and loop-free forwarding path.
Question 109
A leaf migration changes STP priority and shifts the root bridge away from the intended distribution pair. Assume an engineer instead chooses to disable spanning tree on all participating VLANs to force faster convergence. Which root-cause observation follows from that incorrect change?
- The resulting defect is that uncontrolled root election can redirect traffic and create unstable or suboptimal Layer 2 forwarding.
- The resulting defect is that the only consequence of the wrong change is a different device description.
- The resulting defect is that verifying topology after maintenance automatically creates a switching loop.
- The resulting defect is that investigating the forwarding table is the reason a broken route cannot converge.
Explanation
Correct Answer
A:RSTP chooses its root using bridge identifiers and computes roles to avoid Layer 2 loops. The proper corrective action is to set deterministic bridge priorities on the designated root and secondary switches and inspect path selection.
Incorrect Answers
B:This does not explain the actual rSTP topology root selection defect after the shortcut. In the given case, a leaf migration changes STP priority and shifts the root bridge away from the intended distribution pair.
C:This does not explain the actual rSTP topology root selection defect after the shortcut. Verifying topology after maintenance automatically creates a switching loop.
D:This does not explain the actual rSTP topology root selection defect after the shortcut. Investigating the forwarding table is the reason a broken route cannot converge.
Question 110
A leaf migration changes STP priority and shifts the root bridge away from the intended distribution pair. The observed failure is: uncontrolled root election can redirect traffic and create unstable or suboptimal Layer 2 forwarding. Which recovery action addresses the underlying technical fault?
- The controlled remediation is to insert static host routes to control Ethernet BPDU processing.
- The controlled remediation is to restore the intended root hierarchy and verify port roles without disrupting required connectivity.
- The controlled remediation is to disable spanning tree on all participating VLANs to force faster convergence.
- The controlled remediation is to change switch hostnames to influence root election directly.
Explanation
Correct Answer
B:RSTP chooses its root using bridge identifiers and computes roles to avoid Layer 2 loops. Validate against rSTP root bridge ID, root-port roles, topology-change counts, and loop-free forwarding path.
Incorrect Answers
A:Insert static host routes to control Ethernet BPDU processing. This would not reliably restore service after the stated fault. Uncontrolled root election can redirect traffic and create unstable or suboptimal Layer 2 forwarding. The controlled recovery is to restore the intended root hierarchy and verify port roles without disrupting required connectivity.
C:Disable spanning tree on all participating VLANs to force faster convergence. This would not reliably restore service after the stated fault. Uncontrolled root election can redirect traffic and create unstable or suboptimal Layer 2 forwarding. The controlled recovery is to restore the intended root hierarchy and verify port roles without disrupting required connectivity.
D:Change switch hostnames to influence root election directly. This would not reliably restore service after the stated fault. Uncontrolled root election can redirect traffic and create unstable or suboptimal Layer 2 forwarding. The controlled recovery is to restore the intended root hierarchy and verify port roles without disrupting required connectivity.