Cisco 350-601 Practice Test 13
Question 120
A new two-link uplink carries only half its expected capacity and logs report incompatible bundle member parameters. The observed failure is: forcing mismatched member interfaces into a bundle may create inconsistent forwarding or loops. What is the BEST controlled recovery once this failure is recognized?
- The controlled remediation is to disable LACP negotiation and blindly force the incompatible links into service.
- The controlled remediation is to use an OSPF area change to resolve LACP partner mismatches.
- The controlled remediation is to put the two physical member ports in unrelated access VLANs.
- The controlled remediation is to correct channel member settings and verify all intended links are collecting and distributing.
Explanation
Correct Answer
D:Validate against lACP neighbor and actor status, suspended member reasons, interface parameters, and port-channel operational state. LACP negotiates compatible bundled links and rejects or suspends members that violate aggregation conditions.
Incorrect Answers
A:Disable LACP negotiation and blindly force the incompatible links into service. This would not reliably restore service after the stated fault. Forcing mismatched member interfaces into a bundle may create inconsistent forwarding or loops. The controlled recovery is to correct channel member settings and verify all intended links are collecting and distributing.
B:Use an OSPF area change to resolve LACP partner mismatches. This would not reliably restore service after the stated fault. Forcing mismatched member interfaces into a bundle may create inconsistent forwarding or loops. The controlled recovery is to correct channel member settings and verify all intended links are collecting and distributing.
C:Put the two physical member ports in unrelated access VLANs. This would not reliably restore service after the stated fault. Forcing mismatched member interfaces into a bundle may create inconsistent forwarding or loops. The controlled recovery is to correct channel member settings and verify all intended links are collecting and distributing.
Question 121
A pair of Nexus vPC peers lose their peer link during maintenance and one peer suspends vPC member ports to protect the topology. What is the BEST supported implementation or corrective action?
- Restore the supported peer-link trunk and validate vPC control-plane and VLAN consistency.
- Treat the separate peer-keepalive network as a full data-carrying substitute.
- Make both peers use unrelated vPC domain identifiers.
- Disable all peer-link monitoring to conceal loss of the link.
Explanation
Correct Answer
A:This directly addresses vPC peer link health because the vPC peer link carries necessary control and selected data traffic between the cooperating switches. Confirm the change against vPC peer-link operational state, consistency checks, role state, and downstream member suspension logs.
Incorrect Answers
B:A failed peer link can trigger protective suspension or topology-specific disruption. The relevant correction is to restore the supported peer-link trunk and validate vPC control-plane and VLAN consistency.
C:Make both peers use unrelated vPC domain identifiers. The proposed change targets the wrong mechanism or lacks essential validation. The vPC peer link carries necessary control and selected data traffic between the cooperating switches. Relevant evidence is vPC peer-link operational state, consistency checks, role state, and downstream member suspension logs.
D:A failed peer link can trigger protective suspension or topology-specific disruption. The appropriate action remains to restore the supported peer-link trunk and validate vPC control-plane and VLAN consistency.
Question 122
A pair of Nexus vPC peers lose their peer link during maintenance and one peer suspends vPC member ports to protect the topology. Which evidence BEST verifies the intended technical behavior?
- An up management interface without the relevant routing or forwarding table.
- vPC peer-link operational state, consistency checks, role state, and downstream member suspension logs.
- A pre-change network diagram with no live control-plane state.
- An interface description without the effective peer or VXLAN policy.
Explanation
Correct Answer
B:These observations test the actual vPC peer link health mechanism rather than a superficial management status. The vPC peer link carries necessary control and selected data traffic between the cooperating switches.
Incorrect Answers
A:This information cannot independently verify vPC peer link health. The decisive records instead include vPC peer-link operational state, consistency checks, role state, and downstream member suspension logs.
C:This information cannot independently verify vPC peer link health. The vPC peer link carries necessary control and selected data traffic between the cooperating switches.
D:This information cannot independently verify vPC peer link health. An interface description without the effective peer or VXLAN policy.
Question 123
A pair of Nexus vPC peers lose their peer link during maintenance and one peer suspends vPC member ports to protect the topology. Which principle BEST explains why the recommended solution is appropriate?
- A working management-plane ping proves every tenant and application path is healthy.
- A device description always determines actual forwarding policy regardless of running configuration.
- The vPC peer link carries necessary control and selected data traffic between the cooperating switches.
- Physical link carrier guarantees all overlay and routing states are correct.
Explanation
Correct Answer
C:Validation depends on vPC peer-link operational state, consistency checks, role state, and downstream member suspension logs. This explains why the most appropriate response is to restore the supported peer-link trunk and validate vPC control-plane and VLAN consistency.
Incorrect Answers
A:A working management-plane ping proves every tenant and application path is healthy. This is an incorrect generalization for vPC peer link health. The applicable technical behavior is that the vPC peer link carries necessary control and selected data traffic between the cooperating switches. The operator should verify vPC peer-link operational state, consistency checks, role state, and downstream member suspension logs.
B:A device description always determines actual forwarding policy regardless of running configuration. This is an incorrect generalization for vPC peer link health. The applicable technical behavior is that the vPC peer link carries necessary control and selected data traffic between the cooperating switches. The operator should verify vPC peer-link operational state, consistency checks, role state, and downstream member suspension logs.
D:Physical link carrier guarantees all overlay and routing states are correct. This is an incorrect generalization for vPC peer link health. The applicable technical behavior is that the vPC peer link carries necessary control and selected data traffic between the cooperating switches. The operator should verify vPC peer-link operational state, consistency checks, role state, and downstream member suspension logs.
Question 124
A pair of Nexus vPC peers lose their peer link during maintenance and one peer suspends vPC member ports to protect the topology. Assume an engineer instead chooses to treat the separate peer-keepalive network as a full data-carrying substitute. What is the MOST significant failure introduced by that shortcut?
- The defect exists solely because the engineer documented the change.
- Preserving neighbor-state evidence is itself the source of the observed outage.
- Investigating the forwarding table is the reason a broken route cannot converge.
- A failed peer link can trigger protective suspension or topology-specific disruption.
Explanation
Correct Answer
D:The vPC peer link carries necessary control and selected data traffic between the cooperating switches. That is the direct consequence of choosing the misleading shortcut.
Incorrect Answers
A:This does not explain the actual vPC peer link health defect after the shortcut. The meaningful failure is that a failed peer link can trigger protective suspension or topology-specific disruption.
B:This does not explain the actual vPC peer link health defect after the shortcut. The relevant evidence is vPC peer-link operational state, consistency checks, role state, and downstream member suspension logs.
C:This does not explain the actual vPC peer link health defect after the shortcut. Investigating the forwarding table is the reason a broken route cannot converge.
Question 125
A pair of Nexus vPC peers lose their peer link during maintenance and one peer suspends vPC member ports to protect the topology. The observed failure is: a failed peer link can trigger protective suspension or topology-specific disruption. What is the BEST controlled recovery once this failure is recognized?
- Repair peer-link capacity and configuration, then confirm vPC consistency and server redundancy.
- Make both peers use unrelated vPC domain identifiers.
- Disable all peer-link monitoring to conceal loss of the link.
- Treat the separate peer-keepalive network as a full data-carrying substitute.
Explanation
Correct Answer
A:Validate against vPC peer-link operational state, consistency checks, role state, and downstream member suspension logs. This addresses the observable fault while preserving a check of the expected result.
Incorrect Answers
B:Make both peers use unrelated vPC domain identifiers. This would not reliably restore service after the stated fault. A failed peer link can trigger protective suspension or topology-specific disruption. The controlled recovery is to repair peer-link capacity and configuration, then confirm vPC consistency and server redundancy.
C:Disable all peer-link monitoring to conceal loss of the link. This would not reliably restore service after the stated fault. A failed peer link can trigger protective suspension or topology-specific disruption. The controlled recovery is to repair peer-link capacity and configuration, then confirm vPC consistency and server redundancy.
D:Treat the separate peer-keepalive network as a full data-carrying substitute. This would not reliably restore service after the stated fault. A failed peer link can trigger protective suspension or topology-specific disruption. The controlled recovery is to repair peer-link capacity and configuration, then confirm vPC consistency and server redundancy.
Question 126
Dual-attached servers lose connectivity after the inter-peer trunk is misconfigured and vPC consistency state changes. Which configuration decision MOST directly resolves the issue?
- On this affected device, the engineer should make both peers use unrelated vPC domain identifiers.
- On this affected device, the engineer should restore the supported peer-link trunk and validate vPC control-plane and VLAN consistency.
- On this affected device, the engineer should disable all peer-link monitoring to conceal loss of the link.
- On this affected device, the engineer should treat the separate peer-keepalive network as a full data-carrying substitute.
Explanation
Correct Answer
B:This directly addresses vPC peer link health because the vPC peer link carries necessary control and selected data traffic between the cooperating switches.
Incorrect Answers
A:Make both peers use unrelated vPC domain identifiers. The proposed change targets the wrong mechanism or lacks essential validation. The vPC peer link carries necessary control and selected data traffic between the cooperating switches. Relevant evidence is vPC peer-link operational state, consistency checks, role state, and downstream member suspension logs.
C:A failed peer link can trigger protective suspension or topology-specific disruption. In the given case, dual-attached servers lose connectivity after the inter-peer trunk is misconfigured and vPC consistency state changes.
D:A failed peer link can trigger protective suspension or topology-specific disruption. Treat the separate peer-keepalive network as a full data-carrying substitute.
Question 127
Dual-attached servers lose connectivity after the inter-peer trunk is misconfigured and vPC consistency state changes. What should the engineer inspect to confirm the actual state?
- For this deployment, examine a healthy optical light without checking protocol neighbors or forwarding entries.
- For this deployment, examine an up management interface without the relevant routing or forwarding table.
- For this deployment, examine vPC peer-link operational state, consistency checks, role state, and downstream member suspension logs.
- For this deployment, examine a pre-change network diagram with no live control-plane state.
Explanation
Correct Answer
C:These observations test the actual vPC peer link health mechanism rather than a superficial management status. They should be checked after restore the supported peer-link trunk and validate vPC control-plane and VLAN consistency.
Incorrect Answers
A:This information cannot independently verify vPC peer link health. A healthy optical light without checking protocol neighbors or forwarding entries.
B:This information cannot independently verify vPC peer link health. An up management interface without the relevant routing or forwarding table.
D:This information cannot independently verify vPC peer link health. In the given case, dual-attached servers lose connectivity after the inter-peer trunk is misconfigured and vPC consistency state changes.
Question 128
Dual-attached servers lose connectivity after the inter-peer trunk is misconfigured and vPC consistency state changes. What technical behavior underlies the correct decision?
- For this condition, the applicable principle is that physical link carrier guarantees all overlay and routing states are correct.
- For this condition, the applicable principle is that a working management-plane ping proves every tenant and application path is healthy.
- For this condition, the applicable principle is that all control-plane protocols exchange state automatically after a cable is inserted.
- For this condition, the applicable principle is that the vPC peer link carries necessary control and selected data traffic between the cooperating switches.
Explanation
Correct Answer
D:Validation depends on vPC peer-link operational state, consistency checks, role state, and downstream member suspension logs.
Incorrect Answers
A:Physical link carrier guarantees all overlay and routing states are correct. This is an incorrect generalization for vPC peer link health. The applicable technical behavior is that the vPC peer link carries necessary control and selected data traffic between the cooperating switches. The operator should verify vPC peer-link operational state, consistency checks, role state, and downstream member suspension logs.
B:A working management-plane ping proves every tenant and application path is healthy. This is an incorrect generalization for vPC peer link health. The applicable technical behavior is that the vPC peer link carries necessary control and selected data traffic between the cooperating switches. The operator should verify vPC peer-link operational state, consistency checks, role state, and downstream member suspension logs.
C:All control-plane protocols exchange state automatically after a cable is inserted. This is an incorrect generalization for vPC peer link health. The applicable technical behavior is that the vPC peer link carries necessary control and selected data traffic between the cooperating switches. The operator should verify vPC peer-link operational state, consistency checks, role state, and downstream member suspension logs.
Question 129
Dual-attached servers lose connectivity after the inter-peer trunk is misconfigured and vPC consistency state changes. Assume an engineer instead chooses to treat the separate peer-keepalive network as a full data-carrying substitute. Which resulting risk or fault should the reviewer identify?
- The resulting defect is that a failed peer link can trigger protective suspension or topology-specific disruption.
- The resulting defect is that investigating the forwarding table is the reason a broken route cannot converge.
- The resulting defect is that the only consequence of the wrong change is a different device description.
- The resulting defect is that preserving neighbor-state evidence is itself the source of the observed outage.
Explanation
Correct Answer
A:The vPC peer link carries necessary control and selected data traffic between the cooperating switches. The proper corrective action is to restore the supported peer-link trunk and validate vPC control-plane and VLAN consistency.
Incorrect Answers
B:This does not explain the actual vPC peer link health defect after the shortcut. In the given case, dual-attached servers lose connectivity after the inter-peer trunk is misconfigured and vPC consistency state changes.
C:This does not explain the actual vPC peer link health defect after the shortcut. The only consequence of the wrong change is a different device description.
D:This does not explain the actual vPC peer link health defect after the shortcut. Preserving neighbor-state evidence is itself the source of the observed outage.
Question 130
Dual-attached servers lose connectivity after the inter-peer trunk is misconfigured and vPC consistency state changes. The observed failure is: a failed peer link can trigger protective suspension or topology-specific disruption. Which remediation most directly restores the intended behavior?
- The controlled remediation is to disable all peer-link monitoring to conceal loss of the link.
- The controlled remediation is to repair peer-link capacity and configuration, then confirm vPC consistency and server redundancy.
- The controlled remediation is to treat the separate peer-keepalive network as a full data-carrying substitute.
- The controlled remediation is to make both peers use unrelated vPC domain identifiers.
Explanation
Correct Answer
B:Validate against vPC peer-link operational state, consistency checks, role state, and downstream member suspension logs. The vPC peer link carries necessary control and selected data traffic between the cooperating switches.
Incorrect Answers
A:Disable all peer-link monitoring to conceal loss of the link. This would not reliably restore service after the stated fault. A failed peer link can trigger protective suspension or topology-specific disruption. The controlled recovery is to repair peer-link capacity and configuration, then confirm vPC consistency and server redundancy.
C:Treat the separate peer-keepalive network as a full data-carrying substitute. This would not reliably restore service after the stated fault. A failed peer link can trigger protective suspension or topology-specific disruption. The controlled recovery is to repair peer-link capacity and configuration, then confirm vPC consistency and server redundancy.
D:Make both peers use unrelated vPC domain identifiers. This would not reliably restore service after the stated fault. A failed peer link can trigger protective suspension or topology-specific disruption. The controlled recovery is to repair peer-link capacity and configuration, then confirm vPC consistency and server redundancy.