Cisco 300-420 Practice Test 31
Question 300
An access layer needs redundant uplink capacity without an L2 loop and with simple logical links. The observed fault is: Aggregating links across unrelated switches without a supported multichassis feature can create miswiring and outages. Which recovery is BEST once this fault is identified?
- The controlled recovery is to disable spanning tree to hide aggregation incompatibility.
- The controlled recovery is to configure ordinary LACP across unrelated distribution switches with no shared logical system.
- The controlled recovery is to select the matching MEC or Layer 3 model and test chassis and uplink failures.
- The controlled recovery is to assume two physical uplinks automatically create one valid LACP aggregate.
Explanation
Correct Answer
C:EtherChannel requires compatible aggregation peers and multichassis aggregation needs a common supported logical endpoint or alternative routed design. Relevant evidence includes port-channel membership, control-plane domain, link diversity, hash distribution and failure simulation.
Incorrect Answers
A:Disable spanning tree to hide aggregation incompatibility. Aggregating links across unrelated switches without a supported multichassis feature can create miswiring and outages. Use the controlled remediation: select the matching MEC or Layer 3 model and test chassis and uplink failures.
B:Configure ordinary LACP across unrelated distribution switches with no shared logical system. Aggregating links across unrelated switches without a supported multichassis feature can create miswiring and outages. Use the controlled remediation: select the matching MEC or Layer 3 model and test chassis and uplink failures.
D:Assume two physical uplinks automatically create one valid LACP aggregate. Aggregating links across unrelated switches without a supported multichassis feature can create miswiring and outages. Use the controlled remediation: select the matching MEC or Layer 3 model and test chassis and uplink failures.
Question 301
A wiring closet serves many phones and access points but the chosen access switch cannot provide sufficient PoE under maximum load. Which enterprise design procedure best meets this requirement?
- Calculate total PoE class demand and reserve budget for expected powered endpoints and redundant supplies.
- Assume every switchport supplies unlimited PoE regardless of platform rating.
- Size only to average active watts without power supply failure headroom.
- Treat a faster uplink interface as a substitute for adequate PoE capacity.
Explanation
Correct Answer
A:Switch PoE budget and redundancy must be sized for connected device demand rather than only Ethernet data throughput. This is the specific corrective action for Campus PoE budget and endpoint failover.
Incorrect Answers
B:An underbudgeted access closet can shut off critical powered devices during peak demand or PSU failure. This change targets the wrong mechanism for Campus PoE budget and endpoint failover.
C:Size only to average active watts without power supply failure headroom. Switch PoE budget and redundancy must be sized for connected device demand rather than only Ethernet data throughput. Instead inspect device power classes, switch PoE capacity, actual consumption, PSU redundancy and failover tests.
D:An underbudgeted access closet can shut off critical powered devices during peak demand or PSU failure.
Question 302
A wiring closet serves many phones and access points but the chosen access switch cannot provide sufficient PoE under maximum load. Which evidence best distinguishes the intended state from a superficial indicator?
- An old network diagram with no current route, policy, or redundancy state.
- Device power classes, switch PoE capacity, actual consumption, PSU redundancy and failover tests.
- One successful ping to an unrelated test host without a path or failover test.
- A marketing claim without measured routing, capacity or failure-domain evidence.
Explanation
Correct Answer
B:Switch PoE budget and redundancy must be sized for connected device demand rather than only Ethernet data throughput. This evidence observes the actual campus PoE budget and endpoint failover mechanism and its result.
Incorrect Answers
A:This observation alone cannot establish campus PoE budget and endpoint failover. Switch PoE budget and redundancy must be sized for connected device demand rather than only Ethernet data throughput.
C:This observation alone cannot establish campus PoE budget and endpoint failover. The decisive evidence instead includes device power classes, switch PoE capacity, actual consumption, PSU redundancy and failover tests.
D:This observation alone cannot establish campus PoE budget and endpoint failover. A marketing claim without measured routing, capacity or failure-domain evidence.
Question 303
A wiring closet serves many phones and access points but the chosen access switch cannot provide sufficient PoE under maximum load. Which underlying principle explains the correct decision?
- An operational up state alone proves every security and design objective is met.
- Switch PoE budget and redundancy must be sized for connected device demand rather than only Ethernet data throughput.
- Any single device automatically guarantees high availability for every site.
- A longer IP prefix is always less specific than the default route.
Explanation
Correct Answer
B:This is why the appropriate action is calculate total PoE class demand and reserve budget for expected powered endpoints and redundant supplies. Confirm it with device power classes, switch PoE capacity, actual consumption, PSU redundancy and failover tests.
Incorrect Answers
A:An operational up state alone proves every security and design objective is met. This is an incorrect generalization for campus PoE budget and endpoint failover. The relevant rule is switch PoE budget and redundancy must be sized for connected device demand rather than only Ethernet data throughput. Verify using device power classes, switch PoE capacity, actual consumption, PSU redundancy and failover tests.
C:Any single device automatically guarantees high availability for every site. This is an incorrect generalization for campus PoE budget and endpoint failover. The relevant rule is switch PoE budget and redundancy must be sized for connected device demand rather than only Ethernet data throughput. Verify using device power classes, switch PoE capacity, actual consumption, PSU redundancy and failover tests.
D:A longer IP prefix is always less specific than the default route. This is an incorrect generalization for campus PoE budget and endpoint failover. The relevant rule is switch PoE budget and redundancy must be sized for connected device demand rather than only Ethernet data throughput. Verify using device power classes, switch PoE capacity, actual consumption, PSU redundancy and failover tests.
Question 304
A wiring closet serves many phones and access points but the chosen access switch cannot provide sufficient PoE under maximum load. Suppose the operator instead makes this incorrect change: Assume every switchport supplies unlimited PoE regardless of platform rating. What is the most material consequence of that mistake?
- The failure is entirely cosmetic because all control-plane changes are harmless.
- Collecting telemetry originally caused the missing route or service outage.
- An underbudgeted access closet can shut off critical powered devices during peak demand or PSU failure.
- A correct change-control review makes all WAN carriers fail simultaneously.
Explanation
Correct Answer
C:This explains why the proposed shortcut does not solve campus PoE budget and endpoint failover. Switch PoE budget and redundancy must be sized for connected device demand rather than only Ethernet data throughput.
Incorrect Answers
A:The failure is entirely cosmetic because all control-plane changes are harmless. The actual failure is an underbudgeted access closet can shut off critical powered devices during peak demand or PSU failure. Check device power classes, switch PoE capacity, actual consumption, PSU redundancy and failover tests.
B:Collecting telemetry originally caused the missing route or service outage. The actual failure is an underbudgeted access closet can shut off critical powered devices during peak demand or PSU failure. Check device power classes, switch PoE capacity, actual consumption, PSU redundancy and failover tests.
D:A correct change-control review makes all WAN carriers fail simultaneously. The actual failure is an underbudgeted access closet can shut off critical powered devices during peak demand or PSU failure. Check device power classes, switch PoE capacity, actual consumption, PSU redundancy and failover tests.
Question 305
A wiring closet serves many phones and access points but the chosen access switch cannot provide sufficient PoE under maximum load. The observed fault is: An underbudgeted access closet can shut off critical powered devices during peak demand or PSU failure. Which controlled remediation should be used?
- Size only to average active watts without power supply failure headroom.
- Choose sufficient PoE-capable equipment and verify worst-case active endpoints.
- Treat a faster uplink interface as a substitute for adequate PoE capacity.
- Assume every switchport supplies unlimited PoE regardless of platform rating.
Explanation
Correct Answer
B:Switch PoE budget and redundancy must be sized for connected device demand rather than only Ethernet data throughput. This corrects the described failure and provides a verifiable outcome.
Incorrect Answers
A:Size only to average active watts without power supply failure headroom. An underbudgeted access closet can shut off critical powered devices during peak demand or PSU failure. Use the controlled remediation: choose sufficient PoE-capable equipment and verify worst-case active endpoints.
C:Treat a faster uplink interface as a substitute for adequate PoE capacity. An underbudgeted access closet can shut off critical powered devices during peak demand or PSU failure. Use the controlled remediation: choose sufficient PoE-capable equipment and verify worst-case active endpoints.
D:Assume every switchport supplies unlimited PoE regardless of platform rating. An underbudgeted access closet can shut off critical powered devices during peak demand or PSU failure. Use the controlled remediation: choose sufficient PoE-capable equipment and verify worst-case active endpoints.
Question 306
A facility needs power continuity for wireless APs and IP phones after one access switch power supply fails. What is the most defensible configuration decision?
- For this enterprise design, the architect should size only to average active watts without power supply failure headroom.
- For this enterprise design, the architect should treat a faster uplink interface as a substitute for adequate PoE capacity.
- For this enterprise design, the architect should calculate total PoE class demand and reserve budget for expected powered endpoints and redundant supplies.
- For this enterprise design, the architect should assume every switchport supplies unlimited PoE regardless of platform rating.
Explanation
Correct Answer
C:Switch PoE budget and redundancy must be sized for connected device demand rather than only Ethernet data throughput. Confirm the result using device power classes, switch PoE capacity, actual consumption, PSU redundancy and failover tests.
Incorrect Answers
A:Size only to average active watts without power supply failure headroom. Switch PoE budget and redundancy must be sized for connected device demand rather than only Ethernet data throughput. Instead inspect device power classes, switch PoE capacity, actual consumption, PSU redundancy and failover tests.
B:An underbudgeted access closet can shut off critical powered devices during peak demand or PSU failure.
D:An underbudgeted access closet can shut off critical powered devices during peak demand or PSU failure. The relevant action is calculate total PoE class demand and reserve budget for expected powered endpoints and redundant supplies.
Question 307
A facility needs power continuity for wireless APs and IP phones after one access switch power supply fails. Which evidence BEST confirms the actual technical behavior?
- Inspect the following evidence: a hostname inventory without effective configuration or operational measurements.
- Inspect the following evidence: an old network diagram with no current route, policy, or redundancy state.
- Inspect the following evidence: device power classes, switch PoE capacity, actual consumption, PSU redundancy and failover tests.
- Inspect the following evidence: one successful ping to an unrelated test host without a path or failover test.
Explanation
Correct Answer
C:Switch PoE budget and redundancy must be sized for connected device demand rather than only Ethernet data throughput. The intended procedure is calculate total PoE class demand and reserve budget for expected powered endpoints and redundant supplies.
Incorrect Answers
A:This observation alone cannot establish campus PoE budget and endpoint failover. A hostname inventory without effective configuration or operational measurements.
B:This observation alone cannot establish campus PoE budget and endpoint failover. In this case, a facility needs power continuity for wireless APs and IP phones after one access switch power supply fails.
D:This observation alone cannot establish campus PoE budget and endpoint failover. One successful ping to an unrelated test host without a path or failover test.
Question 308
A facility needs power continuity for wireless APs and IP phones after one access switch power supply fails. What networking or enterprise network design concept best explains this scenario?
- The relevant principle is that switch PoE budget and redundancy must be sized for connected device demand rather than only Ethernet data throughput.
- The relevant principle is that a longer IP prefix is always less specific than the default route.
- The relevant principle is that an operational up state alone proves every security and design objective is met.
- The relevant principle is that encryption and segmentation are identical mechanisms and can replace each other.
Explanation
Correct Answer
A:This is why the appropriate action is calculate total PoE class demand and reserve budget for expected powered endpoints and redundant supplies. In this case, a facility needs power continuity for wireless APs and IP phones after one access switch power supply fails.
Incorrect Answers
B:A longer IP prefix is always less specific than the default route. This is an incorrect generalization for campus PoE budget and endpoint failover. The relevant rule is switch PoE budget and redundancy must be sized for connected device demand rather than only Ethernet data throughput. Verify using device power classes, switch PoE capacity, actual consumption, PSU redundancy and failover tests.
C:An operational up state alone proves every security and design objective is met. This is an incorrect generalization for campus PoE budget and endpoint failover. The relevant rule is switch PoE budget and redundancy must be sized for connected device demand rather than only Ethernet data throughput. Verify using device power classes, switch PoE capacity, actual consumption, PSU redundancy and failover tests.
D:Encryption and segmentation are identical mechanisms and can replace each other. This is an incorrect generalization for campus PoE budget and endpoint failover. The relevant rule is switch PoE budget and redundancy must be sized for connected device demand rather than only Ethernet data throughput. Verify using device power classes, switch PoE capacity, actual consumption, PSU redundancy and failover tests.
Question 309
A facility needs power continuity for wireless APs and IP phones after one access switch power supply fails. Suppose the operator instead makes this incorrect change: Assume every switchport supplies unlimited PoE regardless of platform rating. Which resulting fault should the reviewer identify?
- The resulting technical fault is that a correct change-control review makes all WAN carriers fail simultaneously.
- The resulting technical fault is that the only issue is an inaccurate hostname while traffic paths are unaffected.
- The resulting technical fault is that an underbudgeted access closet can shut off critical powered devices during peak demand or PSU failure.
- The resulting technical fault is that collecting telemetry originally caused the missing route or service outage.
Explanation
Correct Answer
C:This explains why the proposed shortcut does not solve campus PoE budget and endpoint failover. The right response is calculate total PoE class demand and reserve budget for expected powered endpoints and redundant supplies.
Incorrect Answers
A:A correct change-control review makes all WAN carriers fail simultaneously. The actual failure is an underbudgeted access closet can shut off critical powered devices during peak demand or PSU failure. Check device power classes, switch PoE capacity, actual consumption, PSU redundancy and failover tests.
B:The only issue is an inaccurate hostname while traffic paths are unaffected. The actual failure is an underbudgeted access closet can shut off critical powered devices during peak demand or PSU failure. Check device power classes, switch PoE capacity, actual consumption, PSU redundancy and failover tests.
D:Collecting telemetry originally caused the missing route or service outage. The actual failure is an underbudgeted access closet can shut off critical powered devices during peak demand or PSU failure. Check device power classes, switch PoE capacity, actual consumption, PSU redundancy and failover tests.
Question 310
A facility needs power continuity for wireless APs and IP phones after one access switch power supply fails. The observed fault is: An underbudgeted access closet can shut off critical powered devices during peak demand or PSU failure. How should the issue be corrected and verified?
- The controlled recovery is to treat a faster uplink interface as a substitute for adequate PoE capacity.
- The controlled recovery is to assume every switchport supplies unlimited PoE regardless of platform rating.
- The controlled recovery is to size only to average active watts without power supply failure headroom.
- The controlled recovery is to choose sufficient PoE-capable equipment and verify worst-case active endpoints.
Explanation
Correct Answer
D:Switch PoE budget and redundancy must be sized for connected device demand rather than only Ethernet data throughput. Relevant evidence includes device power classes, switch PoE capacity, actual consumption, PSU redundancy and failover tests.
Incorrect Answers
A:Treat a faster uplink interface as a substitute for adequate PoE capacity. An underbudgeted access closet can shut off critical powered devices during peak demand or PSU failure. Use the controlled remediation: choose sufficient PoE-capable equipment and verify worst-case active endpoints.
B:Assume every switchport supplies unlimited PoE regardless of platform rating. An underbudgeted access closet can shut off critical powered devices during peak demand or PSU failure. Use the controlled remediation: choose sufficient PoE-capable equipment and verify worst-case active endpoints.
C:Size only to average active watts without power supply failure headroom. An underbudgeted access closet can shut off critical powered devices during peak demand or PSU failure. Use the controlled remediation: choose sufficient PoE-capable equipment and verify worst-case active endpoints.