Cisco 300-410 Practice Test 59
Question 580
During a scheduled validation at the Frisco service-provider handoff, a WAN outage makes the configured RADIUS service unreachable, and local emergency access to network devices also fails. Engineers must restore a customer routing segment without disturbing unrelated production services. The attempted fix creates a regression. Which scoped recovery action is most appropriate?
- Revert an overly broad login method list if it bypasses centralized authentication during normal operations.
- Restore the previous server command set if the change unintentionally expands administrator access.
- Restore the old learning configuration if the change pollutes binding state or affects other ports.
- Restore approved router trust settings if legitimate SLAAC configuration stops working.
Explanation
Correct Answer
A:Revert an overly broad login method list if it bypasses centralized authentication during normal operations. AAA method lists try subsequent methods for server errors, not necessarily for a definitive authentication rejection.
Incorrect Answers
B:Restore the previous server command set if the change unintentionally expands administrator access. This is a rollback for a different component (TACACS+ command authorization), where TACACS+ can authorize individual CLI commands separately from successful login authentication. Here the evidence instead concerns radius aaa fallback: AAA method lists try subsequent methods for server errors, not necessarily for a definitive authentication rejection.
C:Restore the old learning configuration if the change pollutes binding state or affects other ports. This is a rollback for a different component (IPv6 address binding table), where Several IPv6 first-hop security features rely on accurate host address and port bindings. Here the evidence instead concerns radius aaa fallback: AAA method lists try subsequent methods for server errors, not necessarily for a definitive authentication rejection.
D:Restore approved router trust settings if legitimate SLAAC configuration stops working. This is a rollback for a different component (IPv6 Router Advertisement Guard), where RA Guard controls where IPv6 Router Advertisements are accepted on Layer 2 access segments. Here the evidence instead concerns radius aaa fallback: AAA method lists try subsequent methods for server errors, not necessarily for a definitive authentication rejection.
Question 581
During a scheduled validation at the Trenton manufacturing plant, iPv6 hosts receive router advertisements but cannot obtain the required stateful configuration from a remote DHCPv6 service. Engineers must restore a tenant service without disturbing unrelated production services. Which investigation should be prioritized before the engineer modifies configuration?
- Run the supported Cisco Catalyst Center Assurance path trace and examine hop-by-hop forwarding evidence.
- Inspect NTP synchronization, time zone representation, and logging timestamp precision.
- Check RA managed-config flag, DHCPv6 relay destination, and routed reachability to the service.
- Inspect HTTPS service status and certificate subject or SAN against the accessed DNS name.
Explanation
Correct Answer
C:Check RA managed-config flag, DHCPv6 relay destination, and routed reachability to the service. DHCPv6 relaying transports client messages to a remote server; Router Advertisements still convey default-router details.
Incorrect Answers
A:Run the supported Cisco Catalyst Center Assurance path trace and examine hop-by-hop forwarding evidence. This is an investigation for a different failure condition (Catalyst Center path trace), where Assurance path-trace capabilities can isolate the segment traversed by traffic and support focused troubleshooting. Here the evidence instead concerns dhcpv6 relay: DHCPv6 relaying transports client messages to a remote server; Router Advertisements still convey default-router details.
B:Inspect NTP synchronization, time zone representation, and logging timestamp precision. This is an investigation for a different failure condition (Time synchronization for logs), where Reliable timestamps depend on synchronized device clocks and appropriately configured log timestamps. Here the evidence instead concerns dhcpv6 relay: DHCPv6 relaying transports client messages to a remote server; Router Advertisements still convey default-router details.
D:Inspect HTTPS service status and certificate subject or SAN against the accessed DNS name. This is an investigation for a different failure condition (HTTPS device management), where HTTPS management depends on TLS trust and correct certificate identity, not just an enabled port. Here the evidence instead concerns dhcpv6 relay: DHCPv6 relaying transports client messages to a remote server; Router Advertisements still convey default-router details.
Question 582
During a scheduled validation at the Trenton manufacturing plant, iPv6 hosts receive router advertisements but cannot obtain the required stateful configuration from a remote DHCPv6 service. Engineers must restore a tenant service without disturbing unrelated production services. Which targeted configuration or policy correction best resolves the described fault?
- Correct the IOS DHCP pool default-router option and renew affected leases.
- Configure the correct ip helper-address on the client-facing routed interface.
- Configure an authorized DHCPv6 relay destination on the correct client-facing interface.
- Add a least-privilege VTY access-class exception for the authorized administration subnet.
Explanation
Correct Answer
C:Configure an authorized DHCPv6 relay destination on the correct client-facing interface. DHCPv6 relaying transports client messages to a remote server; Router Advertisements still convey default-router details.
Incorrect Answers
A:Correct the IOS DHCP pool default-router option and renew affected leases. This is a configuration change for a different root cause (DHCP default-router option), where DHCP option 3/default-router tells IPv4 clients which gateway to use; leases can be valid despite a wrong option. Here the evidence instead concerns dhcpv6 relay: DHCPv6 relaying transports client messages to a remote server; Router Advertisements still convey default-router details.
B:Configure the correct ip helper-address on the client-facing routed interface. This is a configuration change for a different root cause (IPv4 DHCP relay), where IPv4 DHCP Discover broadcasts require a relay when the DHCP server resides beyond a Layer 3 boundary. Here the evidence instead concerns dhcpv6 relay: DHCPv6 relaying transports client messages to a remote server; Router Advertisements still convey default-router details.
D:Add a least-privilege VTY access-class exception for the authorized administration subnet. This is a configuration change for a different root cause (VTY access-class), where A VTY access-class restricts which source addresses can open remote terminal sessions to the router. Here the evidence instead concerns dhcpv6 relay: DHCPv6 relaying transports client messages to a remote server; Router Advertisements still convey default-router details.
Question 583
During a scheduled validation at the Trenton manufacturing plant, iPv6 hosts receive router advertisements but cannot obtain the required stateful configuration from a remote DHCPv6 service. Engineers must restore a tenant service without disturbing unrelated production services. Which post-change check most directly establishes that the repair is correct?
- Verify hosts receive expected DHCPv6 replies while default-router information still comes from RA.
- Request new test leases and confirm no protected printer address is offered.
- Verify authenticated encrypted SNMP operations succeed and insecure requests are denied.
- Repeat path trace and an application-level test to confirm the failing segment is corrected.
Explanation
Correct Answer
A:Verify hosts receive expected DHCPv6 replies while default-router information still comes from RA. DHCPv6 relaying transports client messages to a remote server; Router Advertisements still convey default-router details.
Incorrect Answers
B:Request new test leases and confirm no protected printer address is offered. This is a validation for another mechanism (DHCP address exclusions), where IOS DHCP address exclusions keep reserved addresses out of automatic lease allocation. Here the evidence instead concerns dhcpv6 relay: DHCPv6 relaying transports client messages to a remote server; Router Advertisements still convey default-router details.
C:Verify authenticated encrypted SNMP operations succeed and insecure requests are denied. This is a validation for another mechanism (SNMPv3 security level), where SNMPv3 authPriv requires both authentication and privacy protection to match the client's requirements. Here the evidence instead concerns dhcpv6 relay: DHCPv6 relaying transports client messages to a remote server; Router Advertisements still convey default-router details.
D:Repeat path trace and an application-level test to confirm the failing segment is corrected. This is a validation for another mechanism (Catalyst Center path trace), where Assurance path-trace capabilities can isolate the segment traversed by traffic and support focused troubleshooting. Here the evidence instead concerns dhcpv6 relay: DHCPv6 relaying transports client messages to a remote server; Router Advertisements still convey default-router details.
Question 584
During a scheduled validation at the Trenton manufacturing plant, iPv6 hosts receive router advertisements but cannot obtain the required stateful configuration from a remote DHCPv6 service. Engineers must restore a tenant service without disturbing unrelated production services. Select TWO actions: one investigation and one targeted remediation that belong together for this incident.
- Inspect the DHCP pool range and configured excluded-address entries against reservations.
- Configure an authorized DHCPv6 relay destination on the correct client-facing interface.
- Set the appropriate remote logging level and destination for the intended operational events.
- Check RA managed-config flag, DHCPv6 relay destination, and routed reachability to the service.
Explanation
Correct Answers
B:Configure an authorized DHCPv6 relay destination on the correct client-facing interface. DHCPv6 relaying transports client messages to a remote server; Router Advertisements still convey default-router details.
D:Check RA managed-config flag, DHCPv6 relay destination, and routed reachability to the service. DHCPv6 relaying transports client messages to a remote server; Router Advertisements still convey default-router details.
Incorrect Answers
A:Inspect the DHCP pool range and configured excluded-address entries against reservations. This is an investigation for a different failure condition (DHCP address exclusions), where IOS DHCP address exclusions keep reserved addresses out of automatic lease allocation. Here the evidence instead concerns dhcpv6 relay: DHCPv6 relaying transports client messages to a remote server; Router Advertisements still convey default-router details.
C:Set the appropriate remote logging level and destination for the intended operational events. This is a configuration change for a different root cause (Syslog severity filtering), where Local logging and remote syslog use separate targets and severity thresholds. Here the evidence instead concerns dhcpv6 relay: DHCPv6 relaying transports client messages to a remote server; Router Advertisements still convey default-router details.
Question 585
During a scheduled validation at the Aurora warehouse network, an operations collector receives no interface telemetry from a router even though the device has network reachability. Engineers must restore management access without disturbing unrelated production services. Which investigation should be prioritized before the engineer modifies configuration?
- Check community string, configured NMS source ACL, UDP 161 reachability, and SNMP service counters.
- Check SCP server enablement, privilege, AAA authorization, and management path reachability.
- Check telemetry subscription encoding, sensor path, transport destination, and subscription state.
- Check UDP/69 transfer initiation, server write permissions, and return data-channel filtering.
Explanation
Correct Answer
C:Check telemetry subscription encoding, sensor path, transport destination, and subscription state. Streaming telemetry depends on a supported sensor model and an active subscription to the receiver.
Incorrect Answers
A:Check community string, configured NMS source ACL, UDP 161 reachability, and SNMP service counters. This is an investigation for a different failure condition (SNMPv2c read access), where SNMPv2c community matching and ACL restrictions determine polling access, but v2c itself lacks modern encryption. Here the evidence instead concerns model-driven telemetry subscriptions: Streaming telemetry depends on a supported sensor model and an active subscription to the receiver.
B:Check SCP server enablement, privilege, AAA authorization, and management path reachability. This is an investigation for a different failure condition (SCP configuration backup), where SCP uses SSH transport but requires appropriate service support and file privileges. Here the evidence instead concerns model-driven telemetry subscriptions: Streaming telemetry depends on a supported sensor model and an active subscription to the receiver.
D:Check UDP/69 transfer initiation, server write permissions, and return data-channel filtering. This is an investigation for a different failure condition (TFTP configuration transfer), where TFTP is a UDP file-transfer service; successful ICMP reachability does not prove file-transfer access. Here the evidence instead concerns model-driven telemetry subscriptions: Streaming telemetry depends on a supported sensor model and an active subscription to the receiver.
Question 586
During a scheduled validation at the Aurora warehouse network, an operations collector receives no interface telemetry from a router even though the device has network reachability. Engineers must restore management access without disturbing unrelated production services. Which targeted configuration or policy correction best resolves the described fault?
- Deploy an appropriately timed UDP-jitter operation to a supported responder for the voice path.
- Use targeted Assurance findings to remediate the documented WLAN, authentication, or upstream issue.
- Correct the supported model-driven telemetry sensor path or receiver settings for the intended interface counters.
- Configure an authorized DHCPv6 relay destination on the correct client-facing interface.
Explanation
Correct Answer
C:Correct the supported model-driven telemetry sensor path or receiver settings for the intended interface counters. Streaming telemetry depends on a supported sensor model and an active subscription to the receiver.
Incorrect Answers
A:Deploy an appropriately timed UDP-jitter operation to a supported responder for the voice path. This is a configuration change for a different root cause (IP SLA UDP jitter monitoring), where Jitter-sensitive applications need measurements of delay variation and loss, not just ICMP reachability. Here the evidence instead concerns model-driven telemetry subscriptions: Streaming telemetry depends on a supported sensor model and an active subscription to the receiver.
B:Use targeted Assurance findings to remediate the documented WLAN, authentication, or upstream issue. This is a configuration change for a different root cause (Catalyst Center client assurance), where Catalyst Center Assurance correlates client experience with network/device telemetry to support diagnosis. Here the evidence instead concerns model-driven telemetry subscriptions: Streaming telemetry depends on a supported sensor model and an active subscription to the receiver.
D:Configure an authorized DHCPv6 relay destination on the correct client-facing interface. This is a configuration change for a different root cause (DHCPv6 relay), where DHCPv6 relaying transports client messages to a remote server; Router Advertisements still convey default-router details. Here the evidence instead concerns model-driven telemetry subscriptions: Streaming telemetry depends on a supported sensor model and an active subscription to the receiver.
Question 587
During a scheduled validation at the Aurora warehouse network, an operations collector receives no interface telemetry from a router even though the device has network reachability. Engineers must restore management access without disturbing unrelated production services. Which post-change check most directly establishes that the repair is correct?
- Request new test leases and confirm no protected printer address is offered.
- Verify timestamped interface samples arrive at the collector at the configured cadence.
- Confirm successful SNMPv3 authentication to the new engine ID after credential repair.
- Test SSH access from the approved source and denial from unauthorized sources.
Explanation
Correct Answer
B:Verify timestamped interface samples arrive at the collector at the configured cadence. Streaming telemetry depends on a supported sensor model and an active subscription to the receiver.
Incorrect Answers
A:Request new test leases and confirm no protected printer address is offered. This is a validation for another mechanism (DHCP address exclusions), where IOS DHCP address exclusions keep reserved addresses out of automatic lease allocation. Here the evidence instead concerns model-driven telemetry subscriptions: Streaming telemetry depends on a supported sensor model and an active subscription to the receiver.
C:Confirm successful SNMPv3 authentication to the new engine ID after credential repair. This is a validation for another mechanism (SNMPv3 engine identity), where SNMPv3 localized authentication keys depend on the engine identity, so device replacement can require credential regeneration. Here the evidence instead concerns model-driven telemetry subscriptions: Streaming telemetry depends on a supported sensor model and an active subscription to the receiver.
D:Test SSH access from the approved source and denial from unauthorized sources. This is a validation for another mechanism (VTY access-class), where A VTY access-class restricts which source addresses can open remote terminal sessions to the router. Here the evidence instead concerns model-driven telemetry subscriptions: Streaming telemetry depends on a supported sensor model and an active subscription to the receiver.
Question 588
During a scheduled validation at the Aurora warehouse network, an operations collector receives no interface telemetry from a router even though the device has network reachability. Engineers must restore management access without disturbing unrelated production services. Select TWO actions: one investigation and one targeted remediation that belong together for this incident.
- Exclude the reserved range from automatic assignment and correct affected leases.
- Run the supported Cisco Catalyst Center Assurance path trace and examine hop-by-hop forwarding evidence.
- Check telemetry subscription encoding, sensor path, transport destination, and subscription state.
- Correct the supported model-driven telemetry sensor path or receiver settings for the intended interface counters.
Explanation
Correct Answers
C:Check telemetry subscription encoding, sensor path, transport destination, and subscription state. Streaming telemetry depends on a supported sensor model and an active subscription to the receiver.
D:Correct the supported model-driven telemetry sensor path or receiver settings for the intended interface counters. Streaming telemetry depends on a supported sensor model and an active subscription to the receiver.
Incorrect Answers
A:Exclude the reserved range from automatic assignment and correct affected leases. This is a configuration change for a different root cause (DHCP address exclusions), where IOS DHCP address exclusions keep reserved addresses out of automatic lease allocation. Here the evidence instead concerns model-driven telemetry subscriptions: Streaming telemetry depends on a supported sensor model and an active subscription to the receiver.
B:Run the supported Cisco Catalyst Center Assurance path trace and examine hop-by-hop forwarding evidence. This is an investigation for a different failure condition (Catalyst Center path trace), where Assurance path-trace capabilities can isolate the segment traversed by traffic and support focused troubleshooting. Here the evidence instead concerns model-driven telemetry subscriptions: Streaming telemetry depends on a supported sensor model and an active subscription to the receiver.
Question 589
During a scheduled validation at the Irvine branch site, dynamic routing neighbors fail on a DMVPN spoke even though unicast ping to the hub's tunnel IP succeeds. Engineers must restore a voice service path without disturbing unrelated production services. Which investigation should be prioritized before the engineer modifies configuration?
- Inspect route-target extended communities on exported VPN routes and VRF import policy at the receiver.
- Check NHRP multicast mapping and the GRE mode used to carry multicast routing hellos.
- Inspect NHRP redirect generation on the hub and shortcut handling on spokes.
- Check how the PE constructs VPNv4 routes and whether each VRF uses a distinct route distinguisher.
Explanation
Correct Answer
B:Check NHRP multicast mapping and the GRE mode used to carry multicast routing hellos. Dynamic routing across GRE/mGRE requires the overlay to carry its multicast or broadcast control traffic.
Incorrect Answers
A:Inspect route-target extended communities on exported VPN routes and VRF import policy at the receiver. This is an investigation for a different failure condition (MPLS VPN route target import), where Route targets control which VPNv4 routes a VRF imports and exports; an RD provides uniqueness rather than membership. Here the evidence instead concerns dmvpn multicast neighbor discovery: Dynamic routing across GRE/mGRE requires the overlay to carry its multicast or broadcast control traffic.
C:Inspect NHRP redirect generation on the hub and shortcut handling on spokes. This is an investigation for a different failure condition (DMVPN phase 3 shortcut), where DMVPN phase 3 uses hub redirects and spoke shortcuts to facilitate direct spoke-to-spoke forwarding. Here the evidence instead concerns dmvpn multicast neighbor discovery: Dynamic routing across GRE/mGRE requires the overlay to carry its multicast or broadcast control traffic.
D:Check how the PE constructs VPNv4 routes and whether each VRF uses a distinct route distinguisher. This is an investigation for a different failure condition (MPLS VPN route distinguisher), where A route distinguisher makes overlapping customer prefixes unique in VPNv4, but does not itself authorize route imports. Here the evidence instead concerns dmvpn multicast neighbor discovery: Dynamic routing across GRE/mGRE requires the overlay to carry its multicast or broadcast control traffic.
Question 590
During a scheduled validation at the Irvine branch site, dynamic routing neighbors fail on a DMVPN spoke even though unicast ping to the hub's tunnel IP succeeds. Engineers must restore a voice service path without disturbing unrelated production services. Which targeted configuration or policy correction best resolves the described fault?
- Enable the intended hub NHRP redirect and spoke NHRP shortcut behavior with a compatible routing design.
- Repair the NHRP multicast map or dynamic mapping appropriate to hub/spoke roles.
- Correct the spoke's NHRP next-hop server and hub tunnel-to-NBMA map for its reachable hub.
- Bind the tunnel to the correct reachable underlay source and update dependent NBMA mapping as needed.
Explanation
Correct Answer
B:Repair the NHRP multicast map or dynamic mapping appropriate to hub/spoke roles. Dynamic routing across GRE/mGRE requires the overlay to carry its multicast or broadcast control traffic.
Incorrect Answers
A:Enable the intended hub NHRP redirect and spoke NHRP shortcut behavior with a compatible routing design. This is a configuration change for a different root cause (DMVPN phase 3 shortcut), where DMVPN phase 3 uses hub redirects and spoke shortcuts to facilitate direct spoke-to-spoke forwarding. Here the evidence instead concerns dmvpn multicast neighbor discovery: Dynamic routing across GRE/mGRE requires the overlay to carry its multicast or broadcast control traffic.
C:Correct the spoke's NHRP next-hop server and hub tunnel-to-NBMA map for its reachable hub. This is a configuration change for a different root cause (DMVPN NHS mapping), where A spoke typically needs valid NHRP hub mappings and an NHS to bootstrap DMVPN registration. Here the evidence instead concerns dmvpn multicast neighbor discovery: Dynamic routing across GRE/mGRE requires the overlay to carry its multicast or broadcast control traffic.
D:Bind the tunnel to the correct reachable underlay source and update dependent NBMA mapping as needed. This is a configuration change for a different root cause (DMVPN tunnel source), where DMVPN GRE tunnel reachability depends on a working NBMA underlay and correct tunnel source association. Here the evidence instead concerns dmvpn multicast neighbor discovery: Dynamic routing across GRE/mGRE requires the overlay to carry its multicast or broadcast control traffic.