Test Prep ASVAB Test Practice Test 37
Question 360
Which instrument measures voltage when connected across two nodes?
- Tachometer
- Voltmeter
- Hygrometer
- Ammeter in series only
Explanation
Correct Answer
B:Best answer. A voltmeter is connected in parallel with the points of interest.
Incorrect Answers
A:Not best. Tachometer: A tachometer measures rotational speed.
C:Not best. Hygrometer: A hygrometer measures humidity. It does not meet the specific requirement in the question.
D:Not best. Ammeter in series only: An ammeter measures current through a path.
Question 361
Where should an ammeter normally be placed to measure current through a circuit branch?
- Across the supply as a near-short
- Across a disconnected capacitor only
- Between unrelated ground points
- In series with that branch
Explanation
Correct Answer
D:Best answer. The same branch current passes through the ammeter.
Incorrect Answers
A:Not best. Across the supply as a near-short: An ammeter's low resistance can cause a dangerous short.
B:Not best. Across a disconnected capacitor only: That does not measure the branch current.
C:Not best. Between unrelated ground points: Such a connection does not establish branch current measurement.
Question 362
What does a transformer use to transfer AC energy between coils?
- Light refraction
- Direct mechanical gearing
- Chemical oxidation
- Magnetic induction
Explanation
Correct Answer
D:Best answer. Changing magnetic flux links primary and secondary windings.
Incorrect Answers
A:Not best. Light refraction: Refraction does not transfer power between coils.
B:Not best. Direct mechanical gearing: A transformer has no gear train.
C:Not best. Chemical oxidation: Transformers are not batteries.
Question 363
Why does a conventional transformer not work normally with steady DC?
- DC always has infinite frequency
- Steady current creates no continuing changing flux
- Copper cannot carry DC
- DC contains no energy
Explanation
Correct Answer
B:Best answer. Transformer action requires varying flux for sustained induction.
Incorrect Answers
A:Not best. DC always has infinite frequency: Steady DC is zero-frequency.
C:Not best. Copper cannot carry DC: Copper conducts DC and AC.
D:Not best. DC contains no energy: DC can deliver energy to loads.
Question 364
What is a rectifier used for?
- Generating acoustic waves
- Converting AC into one-directional current
- Measuring rotational speed
- Increasing metal hardness
Explanation
Correct Answer
B:Best answer. Rectification changes alternating polarity into pulsating DC.
Incorrect Answers
A:Not best. Generating acoustic waves: Speakers create sound.
C:Not best. Measuring rotational speed: A tachometer measures rpm.
D:Not best. Increasing metal hardness: Heat treatment affects hardness.
Question 365
What is the main purpose of a resistor in a basic circuit?
- Limiting current or setting voltage relationships
- Producing mechanical motion always
- Storing a magnetic field indefinitely
- Creating electrons from nothing
Explanation
Correct Answer
A:Best answer. Resistance controls current and voltage drop.
Incorrect Answers
B:Not best. Producing mechanical motion always: Resistors are passive elements.
C:Not best. Storing a magnetic field indefinitely: Inductors are magnetic storage components.
D:Not best. Creating electrons from nothing: Conductors do not create charge.
Question 366
What does electrical grounding commonly provide in equipment?
- A substitute for insulation
- A source of unlimited electrical power
- A reference and fault-current safety path when designed correctly
- A guarantee that every conductor is harmless
Explanation
Correct Answer
C:Best answer. Protective earthing helps clear faults with correct wiring and protection.
Incorrect Answers
A:Not best. A substitute for insulation: Insulation remains necessary.
B:Not best. A source of unlimited electrical power: Grounding does not generate energy.
D:Not best. A guarantee that every conductor is harmless: Live parts can remain dangerous.
Question 367
Which component is most associated with electrical amplification and switching?
- Mechanical spring
- Thermistor alone
- Fuse
- Transistor
Explanation
Correct Answer
D:Best answer. A transistor can control a larger output using a smaller input.
Incorrect Answers
A:Not best. Mechanical spring: A spring stores mechanical energy.
B:Not best. Thermistor alone: A thermistor primarily changes resistance with temperature.
C:Not best. Fuse: A fuse is an overcurrent device. It does not meet the specific requirement in the question.
Question 368
What is alternating current?
- A current that exists only in batteries
- A current that cannot deliver power
- Current whose direction varies with time
- A current with no magnetic effects
Explanation
Correct Answer
C:Best answer. AC reverses direction periodically in common systems.
Incorrect Answers
A:Not best. A current that exists only in batteries: Batteries normally provide DC.
B:Not best. A current that cannot deliver power: AC supplies useful power.
D:Not best. A current with no magnetic effects: AC produces magnetic fields.
Question 369
What does frequency in hertz describe?
- Force per unit area
- Energy per unit charge
- Amperes per volt
- Cycles per second
Explanation
Correct Answer
D:Best answer. One hertz equals one cycle each second. This is the concept directly requested by the question.
Incorrect Answers
A:Not best. Force per unit area: That quantity is pressure.
B:Not best. Energy per unit charge: That quantity is voltage.
C:Not best. Amperes per volt: That quantity is conductance.
Question 370
How does an LED produce visible light?
- Electron-hole recombination in a semiconductor
- Magnetizing iron until luminous
- Heating a filament until incandescent
- Vibrating air with a cone
Explanation
Correct Answer
A:Best answer. An energized junction emits photons. This is the concept directly requested by the question.
Incorrect Answers
B:Not best. Magnetizing iron until luminous: Magnetism alone does not make a visible LED beam.
C:Not best. Heating a filament until incandescent: That describes an incandescent lamp.
D:Not best. Vibrating air with a cone: That describes a loudspeaker.