Test Prep ASVAB Test Practice Test 39
Question 380
A capacitor in a DC circuit has fully charged and an ideal steady state is reached. What happens to current through it?
- It generates alternating current spontaneously
- It increases without limit
- It approaches zero
- It becomes an ideal short forever
Explanation
Correct Answer
C:Best answer. An ideal charged capacitor blocks steady DC current.
Incorrect Answers
A:Not best. It generates alternating current spontaneously: A passive capacitor does not oscillate by itself.
B:Not best. It increases without limit: Steady capacitor conduction does not diverge.
D:Not best. It becomes an ideal short forever: An ideal capacitor is open to steady DC after charging.
Question 381
What happens when identical resistors are connected in parallel?
- The supply frequency must change
- Equivalent resistance doubles
- Their equivalent resistance decreases
- They stop drawing current
Explanation
Correct Answer
C:Best answer. Additional parallel branches increase total conductance.
Incorrect Answers
A:Not best. The supply frequency must change: Resistor arrangement does not dictate frequency.
B:Not best. Equivalent resistance doubles: Series connection doubles resistance for two identical resistors.
D:Not best. They stop drawing current: Parallel resistors still conduct.
Question 382
What material property makes copper useful for electrical wiring?
- Zero mass
- High electrical conductivity
- High electrical insulation
- Guaranteed corrosion immunity
Explanation
Correct Answer
B:Best answer. Copper offers relatively low resistance for a given geometry.
Incorrect Answers
A:Not best. Zero mass: Copper has normal mass. It does not meet the specific requirement in the question.
C:Not best. High electrical insulation: Copper is a conductor, not an insulator.
D:Not best. Guaranteed corrosion immunity: Copper can oxidize.
Question 383
What is a relay?
- A unit of electrical charge
- An electrically operated switch
- A light-sensing resistor
- A passive temperature scale
Explanation
Correct Answer
B:Best answer. A coil or electronic control actuates contacts.
Incorrect Answers
A:Not best. A unit of electrical charge: Coulomb is the charge unit.
C:Not best. A light-sensing resistor: Photoresistors respond to light.
D:Not best. A passive temperature scale: A relay is a device, not a scale.
Question 384
What does a circuit breaker allow after a fault is cleared?
- Creating new current from no source
- Increasing all circuit resistance to infinity permanently
- Resetting its protective mechanism
- Eliminating the need for safe inspection
Explanation
Correct Answer
C:Best answer. Many breakers can be reset after a trip, unlike a blown fuse.
Incorrect Answers
A:Not best. Creating new current from no source: A breaker does not generate electrical energy.
B:Not best. Increasing all circuit resistance to infinity permanently: A reset breaker can close again.
D:Not best. Eliminating the need for safe inspection: Fault causes still need correction.
Question 385
Which physical effect causes a wire with current to generate a magnetic field?
- Photosynthesis
- Osmosis
- Electromagnetism
- Crystallization
Explanation
Correct Answer
C:Best answer. Moving electric charge produces a magnetic field.
Incorrect Answers
A:Not best. Photosynthesis: Photosynthesis captures light in plants.
B:Not best. Osmosis: Osmosis is water diffusion across a membrane.
D:Not best. Crystallization: Crystal formation is structural ordering.
Question 386
What does a battery primarily transform during discharge?
- Mechanical rotation into sound
- Electrical energy into nuclear energy
- Chemical energy into electrical energy
- Temperature directly into mass
Explanation
Correct Answer
C:Best answer. Electrochemical reactions supply electric work.
Incorrect Answers
A:Not best. Mechanical rotation into sound: That is an electromechanical process.
B:Not best. Electrical energy into nuclear energy: Chemical cells do not perform nuclear conversion.
D:Not best. Temperature directly into mass: Battery operation does not transmute matter.
Question 387
When capacitors are connected in parallel, what adds?
- Reciprocal capacitances only
- Capacitances
- Atomic numbers
- Their frequencies
Explanation
Correct Answer
B:Best answer. Parallel capacitors share voltage and their capacitances add.
Incorrect Answers
A:Not best. Reciprocal capacitances only: Reciprocal sum applies to series capacitor combination.
C:Not best. Atomic numbers: Circuit wiring does not alter elements.
D:Not best. Their frequencies: Capacitors have no inherent line frequency to add.
Question 388
Which AC component tends to oppose changes in current?
- Straight piece of insulator
- Inductor
- Ideal closed switch
- Pure resistor only
Explanation
Correct Answer
B:Best answer. Inductive voltage responds to current change.
Incorrect Answers
A:Not best. Straight piece of insulator: An insulator is not an inductor by definition.
C:Not best. Ideal closed switch: A switch offers a conducting path.
D:Not best. Pure resistor only: A resistor opposes current but not changes specifically.
Question 389
Which diode characteristic is essential in reverse-bias operation?
- It blocks most reverse current up to its breakdown regime
- It always has zero reverse voltage
- It becomes a battery
- It conducts exactly the same both directions
Explanation
Correct Answer
A:Best answer. A junction is normally nonconducting in reverse bias before breakdown.
Incorrect Answers
B:Not best. It always has zero reverse voltage: Reverse bias has voltage across it.
C:Not best. It becomes a battery: A diode is not an energy source.
D:Not best. It conducts exactly the same both directions: That contradicts rectification.
Question 390
For a conventional silicon BJT in forward-active operation, what controls the collector current?
- The color of its enclosure
- Atmospheric wind speed directly
- Thermal insulation thickness alone
- Base-emitter drive
Explanation
Correct Answer
D:Best answer. The base-emitter junction controls conduction, with gain depending on operating conditions.
Incorrect Answers
A:Not best. The color of its enclosure: Color does not set collector conduction.
B:Not best. Atmospheric wind speed directly: Wind speed is unrelated to transistor bias.
C:Not best. Thermal insulation thickness alone: Insulation is not the transistor input.