cert
cert-1
cert-2

Pass Fortinet NSE5_FSW_AD-7.6 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers to Pass the Actual Exam!
30 Days Free Updates, Instant Download!

cert-5
cert-6
NSE5_FSW_AD-7.6 Exam - Verified By Experts
NSE5_FSW_AD-7.6 Premium File

NSE5_FSW_AD-7.6 Premium File

$69.99
$76.99
  • Premium File 64 Questions & Answers. Last Update: Nov 15, 2026

Whats Included:

  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
 
$76.99
$69.99
accept 42 downloads in the last 7 days
block-screenshots
Fortinet NSE5_FSW_AD-7.6 Practice Test 75

Question 740

A cabinet with many cameras exceeds its switch PoE watt budget although enough physical ports exist. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. Use supported native and voice VLAN policies so phones and downstream workstations receive appropriate separate traffic treatment.
  2. FortiGate captures the suspected frames at the chosen observation point without altering the user traffic policy.
  3. Check client MAC learning, VLAN database, switch uplink tags, gateway ARP and port assignment on every hop.
  4. Inspect power supply reserve, current draw, negotiated PoE class, priority shedding and port events.
  5. Verify model-specific PoE class, total switch power budget and per-port policy before enabling new powered devices.

Explanation

Correct Answers

D:

Inspect power supply reserve, current draw, negotiated PoE class, priority shedding and port events. Not every FortiSwitch model or port supports identical PoE allocation or every attached device's peak draw. The paired action is: Verify model-specific PoE class, total switch power budget and per-port policy before enabling new powered devices. This is the diagnostic or verification half of the requested TWO-step pair.

E:

Verify model-specific PoE class, total switch power budget and per-port policy before enabling new powered devices. Not every FortiSwitch model or port supports identical PoE allocation or every attached device's peak draw. Verify the action with: Inspect power supply reserve, current draw, negotiated PoE class, priority shedding and port events. This is the configuration or remediation half of the requested TWO-step pair.

Incorrect Answers

A:

Use supported native and voice VLAN policies so phones and downstream workstations receive appropriate separate traffic treatment. This step concerns Voice and data VLAN separation on shared access ports and is not part of the required paired solution. The correct action and evidence are: Verify model-specific PoE class, total switch power budget and per-port policy before enabling new powered devices. Together with: Inspect power supply reserve, current draw, negotiated PoE class, priority shedding and port events.

B:

FortiGate captures the suspected frames at the chosen observation point without altering the user traffic policy. This step concerns FortiGate one-arm sniffer across managed switching and is not part of the required paired solution. The correct action and evidence are: Verify model-specific PoE class, total switch power budget and per-port policy before enabling new powered devices. Together with: Inspect power supply reserve, current draw, negotiated PoE class, priority shedding and port events.

C:

Check client MAC learning, VLAN database, switch uplink tags, gateway ARP and port assignment on every hop. This step concerns VLAN access isolation and troubleshooting of membership and is not part of the required paired solution. The correct action and evidence are: Verify model-specific PoE class, total switch power budget and per-port policy before enabling new powered devices. Together with: Inspect power supply reserve, current draw, negotiated PoE class, priority shedding and port events.

Question 741

An MCLAG access uplink fails after a peer link replacement and the team tests only physical LEDs. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Inspect MCLAG peer status, inter-chassis link, negotiated aggregate IDs, VLAN consistency and controller topology.
  2. Check ingress port, assigned VLAN ID, owner VDOM, gateway, firewall session path and cross-tenant deny counters.
  3. Inspect FortiLink interface type, split-interface setting, connected peer count, STP state and active management path.
  4. Check FortiLink parent, VLAN ID, VDOM membership, port assignment, subnet and firewall-policy path.

Explanation

Correct Answer

A:

Inspect MCLAG peer status, inter-chassis link, negotiated aggregate IDs, VLAN consistency and controller topology. MCLAG redundancy depends on supported peer-link and aggregate design; two cables alone do not constitute working multichassis aggregation. The paired action is: Configure supported FortiSwitch MCLAG peer groups and peer links before connecting downstream redundant bundles.

Incorrect Answers

B:

Check ingress port, assigned VLAN ID, owner VDOM, gateway, firewall session path and cross-tenant deny counters. These observations are applicable to Managed tenant troubleshooting across controller and access layer, but would not isolate the main failure first. The decisive evidence is: Inspect MCLAG peer status, inter-chassis link, negotiated aggregate IDs, VLAN consistency and controller topology.

C:

Inspect FortiLink interface type, split-interface setting, connected peer count, STP state and active management path. These observations are applicable to FortiLink split-interface and standby path design, but would not isolate the main failure first. The decisive evidence is: Inspect MCLAG peer status, inter-chassis link, negotiated aggregate IDs, VLAN consistency and controller topology.

D:

Check FortiLink parent, VLAN ID, VDOM membership, port assignment, subnet and firewall-policy path. These observations are applicable to FortiGate managed FortiSwitch VLAN interface placement, but would not isolate the main failure first. The decisive evidence is: Inspect MCLAG peer status, inter-chassis link, negotiated aggregate IDs, VLAN consistency and controller topology.

Question 742

A branch uplink uses a multimode optic across a single-mode campus fiber run and never achieves light. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Inspect trusted-port state, Discover/Offer path, DHCP binding table, VLAN and counters for dropped offers.
  2. Inspect source MAC entries by VLAN, ingress/egress port, address aging, LAG membership and broadcast counters.
  3. Inspect transceiver SKU, supported compatibility table, Tx/Rx optical power, interface alarms and cable plant type.
  4. Inspect incoming 802.1p and DSCP markings, trust mode, QoS map, physical port and classification counters.

Explanation

Correct Answer

C:

Inspect transceiver SKU, supported compatibility table, Tx/Rx optical power, interface alarms and cable plant type. Matching a mechanical optic cage is insufficient to prove optical or firmware compatibility. The paired action is: Choose supported Fortinet transceivers and link media based on switch capability, optical reach and wavelength.

Incorrect Answers

A:

Inspect trusted-port state, Discover/Offer path, DHCP binding table, VLAN and counters for dropped offers. These observations are applicable to DHCP snooping trust-boundary enforcement, but would not isolate the main failure first. The decisive evidence is: Inspect transceiver SKU, supported compatibility table, Tx/Rx optical power, interface alarms and cable plant type.

B:

Inspect source MAC entries by VLAN, ingress/egress port, address aging, LAG membership and broadcast counters. These observations are applicable to Layer 2 MAC-learning and forwarding decisions, but would not isolate the main failure first. The decisive evidence is: Inspect transceiver SKU, supported compatibility table, Tx/Rx optical power, interface alarms and cable plant type.

D:

Inspect incoming 802.1p and DSCP markings, trust mode, QoS map, physical port and classification counters. These observations are applicable to QoS ingress classification and trust boundaries, but would not isolate the main failure first. The decisive evidence is: Inspect transceiver SKU, supported compatibility table, Tx/Rx optical power, interface alarms and cable plant type.

Question 743

A landlord shares one uplink among tenant VDOMs without restricting customer-tagged VLANs. Which FortiSwitch configuration or corrective action BEST addresses the requirement?

  1. Use FortiGate FortiSwitch Ports statistics or supported switch commands to isolate errors, utilization and port status at the right location.
  2. Assign FortiSwitch VLANs and ports to the intended FortiGate VDOM with explicit isolation and governed shared infrastructure.
  3. Plan S-VLAN and C-VLAN mapping with the correct FortiLink VDOM and platform support for tenant-tagged traffic.
  4. Permit shared FortiSwitch hardware across VDOMs only with verified port and feature support and explicit tenant VLAN tagging.

Explanation

Correct Answer

D:

Permit shared FortiSwitch hardware across VDOMs only with verified port and feature support and explicit tenant VLAN tagging. Shared physical ports can support some per-port controls across VDOMs, but feature support and tagging must be checked for the exact release. Verify the action with: Check VDOM assignment, sharing support, allowed VLANs, policy scope, QoS or port-security support and MAC-learning state.

Incorrect Answers

A:

Use FortiGate FortiSwitch Ports statistics or supported switch commands to isolate errors, utilization and port status at the right location. This action is relevant to Managed switch port statistics and counter analysis, not the controlling requirement in this case. A port-up indicator or one successful ping is not proof that a congested or errored uplink is healthy. The targeted response is: Permit shared FortiSwitch hardware across VDOMs only with verified port and feature support and explicit tenant VLAN tagging.

B:

Assign FortiSwitch VLANs and ports to the intended FortiGate VDOM with explicit isolation and governed shared infrastructure. This action is relevant to FortiGate VDOM-based FortiSwitch tenant assignment, not the controlling requirement in this case. A VDOM creates a separate policy and routing context; it does not by itself make a shared physical switch port safe for all tenants. The targeted response is: Permit shared FortiSwitch hardware across VDOMs only with verified port and feature support and explicit tenant VLAN tagging.

C:

Plan S-VLAN and C-VLAN mapping with the correct FortiLink VDOM and platform support for tenant-tagged traffic. This action is relevant to QinQ outer and inner VLAN tenant mapping, not the controlling requirement in this case. QinQ layering and VDOM assignment are separate controls; wrong outer tagging can mix customers even when inner VLAN IDs differ. The targeted response is: Permit shared FortiSwitch hardware across VDOMs only with verified port and feature support and explicit tenant VLAN tagging.

Question 744

A voice rollout advertises the new voice VLAN but its DHCP scope is still unreachable from the phone segment. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. A redundant topology recovers after a link failure without simultaneous independent forwarding paths causing loops.
  2. An access host receives the right subnet while only approved tagged VLANs traverse the uplink.
  3. Controller and switch return to supported synchronized software and configuration with test-client services restored.
  4. The handset and attached workstation use the intended separate networks and retain their authorized access.

Explanation

Correct Answer

D:

The handset and attached workstation use the intended separate networks and retain their authorized access. Voice tagging is not secured merely because its VLAN ID differs from the workstation's native VLAN.

Incorrect Answers

A:

A redundant topology recovers after a link failure without simultaneous independent forwarding paths causing loops. This result relates to FortiLink split-interface and standby path design, not the acceptance condition under test. The relevant result is: The handset and attached workstation use the intended separate networks and retain their authorized access.

B:

An access host receives the right subnet while only approved tagged VLANs traverse the uplink. This result relates to FortiSwitch native VLAN versus allowed VLANs, not the acceptance condition under test. The relevant result is: The handset and attached workstation use the intended separate networks and retain their authorized access.

C:

Controller and switch return to supported synchronized software and configuration with test-client services restored. This result relates to FortiLink synchronization and upgrade troubleshooting, not the acceptance condition under test. The relevant result is: The handset and attached workstation use the intended separate networks and retain their authorized access.

Question 745

A mispatched access switch creates a broadcast storm that saturates multiple closets. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. Runaway flooding is contained without blocking legitimate broadcast-based onboarding or multicast subscribers.
  2. Spoofed ARP replies are dropped while legitimate endpoints maintain gateway ARP resolution.
  3. Legitimate clients lease addresses while rogue DHCP servers connected to untrusted access ports cannot answer.
  4. The expected known switch becomes authorized and synchronizes without accepting an unrelated device.

Explanation

Correct Answer

A:

Runaway flooding is contained without blocking legitimate broadcast-based onboarding or multicast subscribers. Overaggressive storm control can break DHCP, ARP or group discovery even when physical links remain healthy.

Incorrect Answers

B:

Spoofed ARP replies are dropped while legitimate endpoints maintain gateway ARP resolution. This result relates to Dynamic ARP inspection with DHCP snooping bindings, not the acceptance condition under test. The relevant result is: Runaway flooding is contained without blocking legitimate broadcast-based onboarding or multicast subscribers.

C:

Legitimate clients lease addresses while rogue DHCP servers connected to untrusted access ports cannot answer. This result relates to DHCP snooping trust-boundary enforcement, not the acceptance condition under test. The relevant result is: Runaway flooding is contained without blocking legitimate broadcast-based onboarding or multicast subscribers.

D:

The expected known switch becomes authorized and synchronizes without accepting an unrelated device. This result relates to Controller authorization and pending-switch state, not the acceptance condition under test. The relevant result is: Runaway flooding is contained without blocking legitimate broadcast-based onboarding or multicast subscribers.

Question 746

A wireless bridge carries a FortiLink interswitch segment but does not forward expected discovery multicast frames. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. Management connectivity is established across the supported intermediate network without losing segmentation or authentication assumptions.
  2. The handset and attached workstation use the intended separate networks and retain their authorized access.
  3. Management control and authorized user traffic work over the direct connection without confusing them.
  4. Exactly the intended serial joins managed inventory and receives approved controller settings after authorization.

Explanation

Correct Answer

A:

Management connectivity is established across the supported intermediate network without losing segmentation or authentication assumptions. FortiLink over intermediate networks requires topology-specific settings; ordinary IP reachability alone does not establish FortiLink discovery.

Incorrect Answers

B:

The handset and attached workstation use the intended separate networks and retain their authorized access. This result relates to Voice and data VLAN separation on shared access ports, not the acceptance condition under test. The relevant result is: Management connectivity is established across the supported intermediate network without losing segmentation or authentication assumptions.

C:

Management control and authorized user traffic work over the direct connection without confusing them. This result relates to Single FortiGate and single FortiSwitch topology, not the acceptance condition under test. The relevant result is: Management connectivity is established across the supported intermediate network without losing segmentation or authentication assumptions.

D:

Exactly the intended serial joins managed inventory and receives approved controller settings after authorization. This result relates to Discovered versus authorized FortiSwitch state, not the acceptance condition under test. The relevant result is: Management connectivity is established across the supported intermediate network without losing segmentation or authentication assumptions.

Question 747

An office printer sends DHCP Discover repeatedly but never sees an Offer after a trust-boundary change. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. Trace DHCP and ARP exchanges at ingress and uplink to distinguish missing requests from blocked or malformed responses.
  2. Inspect controller switch list, interface events, authentication logs, current configuration, timestamps and recent change history.
  3. Distinguish FortiSwitch discovery from authorization, and restore the correct controller ownership without automatically trusting unknown devices.
  4. Inspect Discover/Offer/Request/Ack sequence, ARP requests/replies, VLAN tags, DHCP snooping and DAI counters.
  5. The managed switch retains the intended controller-pushed policy after a controlled synchronization and restart.

Explanation

Correct Answers

A:

Trace DHCP and ARP exchanges at ingress and uplink to distinguish missing requests from blocked or malformed responses. A DHCP lease failure can originate at the client, switch, relay or server; capturing at one side alone is not always conclusive. Verify the action with: Inspect Discover/Offer/Request/Ack sequence, ARP requests/replies, VLAN tags, DHCP snooping and DAI counters. This is the configuration or remediation half of the requested TWO-step pair.

D:

Inspect Discover/Offer/Request/Ack sequence, ARP requests/replies, VLAN tags, DHCP snooping and DAI counters. A DHCP lease failure can originate at the client, switch, relay or server; capturing at one side alone is not always conclusive. The paired action is: Trace DHCP and ARP exchanges at ingress and uplink to distinguish missing requests from blocked or malformed responses. This is the diagnostic or verification half of the requested TWO-step pair.

Incorrect Answers

B:

Inspect controller switch list, interface events, authentication logs, current configuration, timestamps and recent change history. This step concerns FortiSwitch diagnostic commands and logs and is not part of the required paired solution. The correct action and evidence are: Trace DHCP and ARP exchanges at ingress and uplink to distinguish missing requests from blocked or malformed responses. Together with: Inspect Discover/Offer/Request/Ack sequence, ARP requests/replies, VLAN tags, DHCP snooping and DAI counters.

C:

Distinguish FortiSwitch discovery from authorization, and restore the correct controller ownership without automatically trusting unknown devices. This step concerns Controller authorization and pending-switch state and is not part of the required paired solution. The correct action and evidence are: Trace DHCP and ARP exchanges at ingress and uplink to distinguish missing requests from blocked or malformed responses. Together with: Inspect Discover/Offer/Request/Ack sequence, ARP requests/replies, VLAN tags, DHCP snooping and DAI counters.

E:

The managed switch retains the intended controller-pushed policy after a controlled synchronization and restart. This step concerns Managed switch configuration synchronization and is not part of the required paired solution. The correct action and evidence are: Trace DHCP and ARP exchanges at ingress and uplink to distinguish missing requests from blocked or malformed responses. Together with: Inspect Discover/Offer/Request/Ack sequence, ARP requests/replies, VLAN tags, DHCP snooping and DAI counters.

Question 748

A shared FortiSwitch port carries two tenants but the controller creates both VLANs inside the wrong VDOM. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. All expected child interfaces enumerate at supported speeds without disrupting unrelated uplinks.
  2. A tenant reaches only its approved VDOM resources and does not inherit another tenant's policies.
  3. The offending misassignment is corrected with both permitted traffic and forbidden cross-tenant traffic tested.
  4. The new FortiSwitch discovers the designated controller while unrelated FortiGate interfaces retain their normal function.

Explanation

Correct Answer

B:

A tenant reaches only its approved VDOM resources and does not inherit another tenant's policies. A VDOM creates a separate policy and routing context; it does not by itself make a shared physical switch port safe for all tenants.

Incorrect Answers

A:

All expected child interfaces enumerate at supported speeds without disrupting unrelated uplinks. This result relates to FortiSwitch split port breakout mode, not the acceptance condition under test. The relevant result is: A tenant reaches only its approved VDOM resources and does not inherit another tenant's policies.

C:

The offending misassignment is corrected with both permitted traffic and forbidden cross-tenant traffic tested. This result relates to Managed tenant troubleshooting across controller and access layer, not the acceptance condition under test. The relevant result is: A tenant reaches only its approved VDOM resources and does not inherit another tenant's policies.

D:

The new FortiSwitch discovers the designated controller while unrelated FortiGate interfaces retain their normal function. This result relates to FortiLink management interface provisioning, not the acceptance condition under test. The relevant result is: A tenant reaches only its approved VDOM resources and does not inherit another tenant's policies.

Question 749

An engineer trusts every edge port to stop false positives, removing the anti-spoofing boundary. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. Examine port binding list, packet source IP, ingress VLAN, IP-source guard counters and expected host subnet.
  2. Use supported dynamic ARP inspection with valid switch bindings to reject spoofed IP-MAC claims at untrusted edges.
  3. Enable supported DHCP snooping on client VLANs and trust only known DHCP-server or relay-facing links.
  4. Inspect ARP inspection status, DHCP snooping binding database, source MAC/IP, trusted ports and violation logs.
  5. The exact dropped direction or incorrect address binding is evidenced before changing a security feature.

Explanation

Correct Answers

B:

Use supported dynamic ARP inspection with valid switch bindings to reject spoofed IP-MAC claims at untrusted edges. DAI validation needs a reliable binding or exception policy; enabling it blindly can interrupt static-IP devices. Verify the action with: Inspect ARP inspection status, DHCP snooping binding database, source MAC/IP, trusted ports and violation logs. This is the configuration or remediation half of the requested TWO-step pair.

D:

Inspect ARP inspection status, DHCP snooping binding database, source MAC/IP, trusted ports and violation logs. DAI validation needs a reliable binding or exception policy; enabling it blindly can interrupt static-IP devices. The paired action is: Use supported dynamic ARP inspection with valid switch bindings to reject spoofed IP-MAC claims at untrusted edges. This is the diagnostic or verification half of the requested TWO-step pair.

Incorrect Answers

A:

Examine port binding list, packet source IP, ingress VLAN, IP-source guard counters and expected host subnet. This step concerns IPv4 source guard and binding-based packet filtering and is not part of the required paired solution. The correct action and evidence are: Use supported dynamic ARP inspection with valid switch bindings to reject spoofed IP-MAC claims at untrusted edges. Together with: Inspect ARP inspection status, DHCP snooping binding database, source MAC/IP, trusted ports and violation logs.

C:

Enable supported DHCP snooping on client VLANs and trust only known DHCP-server or relay-facing links. This step concerns DHCP snooping trust-boundary enforcement and is not part of the required paired solution. The correct action and evidence are: Use supported dynamic ARP inspection with valid switch bindings to reject spoofed IP-MAC claims at untrusted edges. Together with: Inspect ARP inspection status, DHCP snooping binding database, source MAC/IP, trusted ports and violation logs.

E:

The exact dropped direction or incorrect address binding is evidenced before changing a security feature. This step concerns Capture-based DHCP and ARP path isolation and is not part of the required paired solution. The correct action and evidence are: Use supported dynamic ARP inspection with valid switch bindings to reject spoofed IP-MAC claims at untrusted edges. Together with: Inspect ARP inspection status, DHCP snooping binding database, source MAC/IP, trusted ports and violation logs.

Question 750

A second floor switch is cabled through an undocumented uplink and never appears in managed FortiSwitch inventory. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. The handset and attached workstation use the intended separate networks and retain their authorized access.
  2. The new FortiSwitch discovers the designated controller while unrelated FortiGate interfaces retain their normal function.
  3. The user VLAN reaches the authorized gateway without being placed on an unrelated physical FortiGate interface.
  4. Each intended managed switch appears with valid upstream connectivity and no unintended layer-2 loop.

Explanation

Correct Answer

D:

Each intended managed switch appears with valid upstream connectivity and no unintended layer-2 loop. The FortiGate-managed FortiSwitch stack is a managed L2 topology, not automatically a single chassis or universal VSF-like control plane.

Incorrect Answers

A:

The handset and attached workstation use the intended separate networks and retain their authorized access. This result relates to Voice and data VLAN separation on shared access ports, not the acceptance condition under test. The relevant result is: Each intended managed switch appears with valid upstream connectivity and no unintended layer-2 loop.

B:

The new FortiSwitch discovers the designated controller while unrelated FortiGate interfaces retain their normal function. This result relates to FortiLink management interface provisioning, not the acceptance condition under test. The relevant result is: Each intended managed switch appears with valid upstream connectivity and no unintended layer-2 loop.

C:

The user VLAN reaches the authorized gateway without being placed on an unrelated physical FortiGate interface. This result relates to FortiGate managed FortiSwitch VLAN interface placement, not the acceptance condition under test. The relevant result is: Each intended managed switch appears with valid upstream connectivity and no unintended layer-2 loop.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests