cert
cert-1
cert-2

Pass Fortinet NSE5_FSW_AD-7.6 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers to Pass the Actual Exam!
30 Days Free Updates, Instant Download!

cert-5
cert-6
NSE5_FSW_AD-7.6 Exam - Verified By Experts
NSE5_FSW_AD-7.6 Premium File

NSE5_FSW_AD-7.6 Premium File

$69.99
$76.99
  • Premium File 64 Questions & Answers. Last Update: Nov 15, 2026

Whats Included:

  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
 
$76.99
$69.99
accept 42 downloads in the last 7 days
block-screenshots
Fortinet NSE5_FSW_AD-7.6 Practice Test 74

Question 730

The active FortiGate is restarted before the team verifies how managed-switch authorization behaves on the peer. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. Voice packets receive intended treatment without allowing arbitrary untrusted hosts to claim top priority.
  2. The intended tenant configuration changes while other tenants retain their segmentation and service.
  3. A tenant reaches only its approved VDOM resources and does not inherit another tenant's policies.
  4. A controlled FortiGate HA failover leaves managed switches authorized and required client access functioning.

Explanation

Correct Answer

D:

A controlled FortiGate HA failover leaves managed switches authorized and required client access functioning. FortiGate HA design and FortiSwitch stacking/MCLAG are separate mechanisms; their failure paths must both be evaluated.

Incorrect Answers

A:

Voice packets receive intended treatment without allowing arbitrary untrusted hosts to claim top priority. This result relates to QoS ingress classification and trust boundaries, not the acceptance condition under test. The relevant result is: A controlled FortiGate HA failover leaves managed switches authorized and required client access functioning.

B:

The intended tenant configuration changes while other tenants retain their segmentation and service. This result relates to Multi-tenant change verification and rollback, not the acceptance condition under test. The relevant result is: A controlled FortiGate HA failover leaves managed switches authorized and required client access functioning.

C:

A tenant reaches only its approved VDOM resources and does not inherit another tenant's policies. This result relates to FortiGate VDOM-based FortiSwitch tenant assignment, not the acceptance condition under test. The relevant result is: A controlled FortiGate HA failover leaves managed switches authorized and required client access functioning.

Question 731

A new guest VLAN works on one FortiSwitch but is omitted from the FortiLink interswitch path. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. Identify FortiLink failures caused by split-interface, HA, MCLAG peer or ISL mismatches before changing unrelated ports.
  2. Verify FortiLink management status and user VLAN reachability independently when a switch is authorized but clients fail.
  3. The intended VLAN survives a switch restart without unexpected controller overwrite or unauthorized local change.
  4. Inspect Discover/Offer/Request/Ack sequence, ARP requests/replies, VLAN tags, DHCP snooping and DAI counters.
  5. Inspect FortiLink management state, native/tagged VLANs, port membership, FortiGate interface and active firewall policy.

Explanation

Correct Answers

B:

Verify FortiLink management status and user VLAN reachability independently when a switch is authorized but clients fail. FortiLink transports management and data; a successful controller heartbeat does not guarantee a user VLAN or firewall session is permitted. Verify the action with: Inspect FortiLink management state, native/tagged VLANs, port membership, FortiGate interface and active firewall policy. This is the configuration or remediation half of the requested TWO-step pair.

E:

Inspect FortiLink management state, native/tagged VLANs, port membership, FortiGate interface and active firewall policy. FortiLink transports management and data; a successful controller heartbeat does not guarantee a user VLAN or firewall session is permitted. The paired action is: Verify FortiLink management status and user VLAN reachability independently when a switch is authorized but clients fail. This is the diagnostic or verification half of the requested TWO-step pair.

Incorrect Answers

A:

Identify FortiLink failures caused by split-interface, HA, MCLAG peer or ISL mismatches before changing unrelated ports. This step concerns FortiLink HA and MCLAG topology faults and is not part of the required paired solution. The correct action and evidence are: Verify FortiLink management status and user VLAN reachability independently when a switch is authorized but clients fail. Together with: Inspect FortiLink management state, native/tagged VLANs, port membership, FortiGate interface and active firewall policy.

C:

The intended VLAN survives a switch restart without unexpected controller overwrite or unauthorized local change. This step concerns VLAN configuration persistence and drift control and is not part of the required paired solution. The correct action and evidence are: Verify FortiLink management status and user VLAN reachability independently when a switch is authorized but clients fail. Together with: Inspect FortiLink management state, native/tagged VLANs, port membership, FortiGate interface and active firewall policy.

D:

Inspect Discover/Offer/Request/Ack sequence, ARP requests/replies, VLAN tags, DHCP snooping and DAI counters. This step concerns Capture-based DHCP and ARP path isolation and is not part of the required paired solution. The correct action and evidence are: Verify FortiLink management status and user VLAN reachability independently when a switch is authorized but clients fail. Together with: Inspect FortiLink management state, native/tagged VLANs, port membership, FortiGate interface and active firewall policy.

Question 732

A new low storm-control threshold prevents otherwise healthy phones from obtaining DHCP leases. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. Use supported MAC-based access controls with narrow authorized device roles and avoid treating MAC addresses as strong identity proof.
  2. Set measured storm-control thresholds for broadcast, multicast or unknown unicast as supported and validate needed discovery protocols.
  3. Inspect frame-rate counters by class, threshold configuration, affected VLANs and protocol health under controlled load.
  4. Review RADIUS Access-Accept attributes, CoA path, session identifier, switch port role, DACL installation and packet test.
  5. Critical telephony and wireless endpoints receive continuous intended power without overrunning PSU capacity.

Explanation

Correct Answers

B:

Set measured storm-control thresholds for broadcast, multicast or unknown unicast as supported and validate needed discovery protocols. Overaggressive storm control can break DHCP, ARP or group discovery even when physical links remain healthy. Verify the action with: Inspect frame-rate counters by class, threshold configuration, affected VLANs and protocol health under controlled load. This is the configuration or remediation half of the requested TWO-step pair.

C:

Inspect frame-rate counters by class, threshold configuration, affected VLANs and protocol health under controlled load. Overaggressive storm control can break DHCP, ARP or group discovery even when physical links remain healthy. The paired action is: Set measured storm-control thresholds for broadcast, multicast or unknown unicast as supported and validate needed discovery protocols. This is the diagnostic or verification half of the requested TWO-step pair.

Incorrect Answers

A:

Use supported MAC-based access controls with narrow authorized device roles and avoid treating MAC addresses as strong identity proof. This step concerns MAC-based authentication and restricted legacy devices and is not part of the required paired solution. The correct action and evidence are: Set measured storm-control thresholds for broadcast, multicast or unknown unicast as supported and validate needed discovery protocols. Together with: Inspect frame-rate counters by class, threshold configuration, affected VLANs and protocol health under controlled load.

D:

Review RADIUS Access-Accept attributes, CoA path, session identifier, switch port role, DACL installation and packet test. This step concerns RADIUS change of authorization and applied session policy and is not part of the required paired solution. The correct action and evidence are: Set measured storm-control thresholds for broadcast, multicast or unknown unicast as supported and validate needed discovery protocols. Together with: Inspect frame-rate counters by class, threshold configuration, affected VLANs and protocol health under controlled load.

E:

Critical telephony and wireless endpoints receive continuous intended power without overrunning PSU capacity. This step concerns Power over Ethernet port controls and budgets and is not part of the required paired solution. The correct action and evidence are: Set measured storm-control thresholds for broadcast, multicast or unknown unicast as supported and validate needed discovery protocols. Together with: Inspect frame-rate counters by class, threshold configuration, affected VLANs and protocol health under controlled load.

Question 733

A coworker plugs an unmanaged eight-port switch into a desk port and hundreds of new MACs are learned. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. Set model-supported dynamic MAC address learning limits and specific violation action on access-facing switch ports.
  2. A rogue root candidate is blocked or a looped path remains safely contained without wiping all STP configuration.
  3. Verify that supported CoA or dynamic user security profiles are enforced on authenticated sessions under the deployed topology.
  4. Inspect MAC table usage, configured learning limit, learned device count, port-security event and violation action.
  5. Check learned client MAC, RADIUS MAC authentication response, access policy, fallback sequence and effective VLAN.

Explanation

Correct Answers

A:

Set model-supported dynamic MAC address learning limits and specific violation action on access-facing switch ports. Dynamic MAC learning limits reduce accidental fan-out but should be tuned for legitimate multi-device access designs. Verify the action with: Inspect MAC table usage, configured learning limit, learned device count, port-security event and violation action. This is the configuration or remediation half of the requested TWO-step pair.

D:

Inspect MAC table usage, configured learning limit, learned device count, port-security event and violation action. Dynamic MAC learning limits reduce accidental fan-out but should be tuned for legitimate multi-device access designs. The paired action is: Set model-supported dynamic MAC address learning limits and specific violation action on access-facing switch ports. This is the diagnostic or verification half of the requested TWO-step pair.

Incorrect Answers

B:

A rogue root candidate is blocked or a looped path remains safely contained without wiping all STP configuration. This step concerns Root guard and loop guard failure response and is not part of the required paired solution. The correct action and evidence are: Set model-supported dynamic MAC address learning limits and specific violation action on access-facing switch ports. Together with: Inspect MAC table usage, configured learning limit, learned device count, port-security event and violation action.

C:

Verify that supported CoA or dynamic user security profiles are enforced on authenticated sessions under the deployed topology. This step concerns RADIUS change of authorization and applied session policy and is not part of the required paired solution. The correct action and evidence are: Set model-supported dynamic MAC address learning limits and specific violation action on access-facing switch ports. Together with: Inspect MAC table usage, configured learning limit, learned device count, port-security event and violation action.

E:

Check learned client MAC, RADIUS MAC authentication response, access policy, fallback sequence and effective VLAN. This step concerns MAC-based authentication and restricted legacy devices and is not part of the required paired solution. The correct action and evidence are: Set model-supported dynamic MAC address learning limits and specific violation action on access-facing switch ports. Together with: Inspect MAC table usage, configured learning limit, learned device count, port-security event and violation action.

Question 734

A new staff VLAN exists on FortiGate but nobody has assigned it to access ports on the managed switch. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. Check client MAC learning, VLAN database, switch uplink tags, gateway ARP and port assignment on every hop.
  2. The suspect device is restricted without interrupting unrelated tenants and can be restored after review.
  3. Change managed switch VLAN membership through the FortiGate controller and verify the installed configuration stays consistent.
  4. Build FortiSwitch VLAN interfaces in the correct FortiLink context and assign ports through the managed switch controller.
  5. Check FortiLink parent, VLAN ID, VDOM membership, port assignment, subnet and firewall-policy path.

Explanation

Correct Answers

D:

Build FortiSwitch VLAN interfaces in the correct FortiLink context and assign ports through the managed switch controller. A named VLAN in FortiOS is not proof its switch-port membership and L3 policy are correct. Verify the action with: Check FortiLink parent, VLAN ID, VDOM membership, port assignment, subnet and firewall-policy path. This is the configuration or remediation half of the requested TWO-step pair.

E:

Check FortiLink parent, VLAN ID, VDOM membership, port assignment, subnet and firewall-policy path. A named VLAN in FortiOS is not proof its switch-port membership and L3 policy are correct. The paired action is: Build FortiSwitch VLAN interfaces in the correct FortiLink context and assign ports through the managed switch controller. This is the diagnostic or verification half of the requested TWO-step pair.

Incorrect Answers

A:

Check client MAC learning, VLAN database, switch uplink tags, gateway ARP and port assignment on every hop. This step concerns VLAN access isolation and troubleshooting of membership and is not part of the required paired solution. The correct action and evidence are: Build FortiSwitch VLAN interfaces in the correct FortiLink context and assign ports through the managed switch controller. Together with: Check FortiLink parent, VLAN ID, VDOM membership, port assignment, subnet and firewall-policy path.

B:

The suspect device is restricted without interrupting unrelated tenants and can be restored after review. This step concerns VLAN security policy and quarantine actions and is not part of the required paired solution. The correct action and evidence are: Build FortiSwitch VLAN interfaces in the correct FortiLink context and assign ports through the managed switch controller. Together with: Check FortiLink parent, VLAN ID, VDOM membership, port assignment, subnet and firewall-policy path.

C:

Change managed switch VLAN membership through the FortiGate controller and verify the installed configuration stays consistent. This step concerns VLAN configuration persistence and drift control and is not part of the required paired solution. The correct action and evidence are: Build FortiSwitch VLAN interfaces in the correct FortiLink context and assign ports through the managed switch controller. Together with: Check FortiLink parent, VLAN ID, VDOM membership, port assignment, subnet and firewall-policy path.

Question 735

A third-party optic fits the switch but platform logs report it as unsupported after a firmware change. Which FortiSwitch configuration or corrective action BEST addresses the requirement?

  1. Choose supported Fortinet transceivers and link media based on switch capability, optical reach and wavelength.
  2. Enable IPv4 source guard on supported switch interfaces only with appropriate DHCP snooping or static bindings.
  3. Verify model-specific PoE class, total switch power budget and per-port policy before enabling new powered devices.
  4. Set only mutually supported Ethernet port rates and verify operational negotiation instead of forcing mismatched speeds.

Explanation

Correct Answer

A:

Choose supported Fortinet transceivers and link media based on switch capability, optical reach and wavelength. Matching a mechanical optic cage is insufficient to prove optical or firmware compatibility. Verify the action with: Inspect transceiver SKU, supported compatibility table, Tx/Rx optical power, interface alarms and cable plant type.

Incorrect Answers

B:

Enable IPv4 source guard on supported switch interfaces only with appropriate DHCP snooping or static bindings. This action is relevant to IPv4 source guard and binding-based packet filtering, not the controlling requirement in this case. Source guard is an ingress source-binding check, not a full replacement for routed firewall policies or endpoint security. The targeted response is: Choose supported Fortinet transceivers and link media based on switch capability, optical reach and wavelength.

C:

Verify model-specific PoE class, total switch power budget and per-port policy before enabling new powered devices. This action is relevant to Power over Ethernet port controls and budgets, not the controlling requirement in this case. Not every FortiSwitch model or port supports identical PoE allocation or every attached device's peak draw. The targeted response is: Choose supported Fortinet transceivers and link media based on switch capability, optical reach and wavelength.

D:

Set only mutually supported Ethernet port rates and verify operational negotiation instead of forcing mismatched speeds. This action is relevant to Switch port speed and duplex commissioning, not the controlling requirement in this case. Incorrect forced port speed or duplex can mimic application loss even when the VLAN configuration is valid. The targeted response is: Choose supported Fortinet transceivers and link media based on switch capability, optical reach and wavelength.

Question 736

A technician isolates management over FortiLink but mistakenly blocks the same link's approved client VLAN traffic. Which FortiSwitch configuration or corrective action BEST addresses the requirement?

  1. Correlate stack and ISL status to identify the failed path instead of reconfiguring all access VLANs.
  2. Use a supported direct FortiLink connection and confirm controller traffic and client forwarding on the intended interfaces.
  3. Assign FortiSwitch VLANs and ports to the intended FortiGate VDOM with explicit isolation and governed shared infrastructure.
  4. Use documented peer-group and downstream trunk configuration for MCLAG rather than creating ad hoc parallel Ethernet links.

Explanation

Correct Answer

B:

Use a supported direct FortiLink connection and confirm controller traffic and client forwarding on the intended interfaces. FortiLink carries management and data traffic; a valid management handshake does not prove every user VLAN is forwarded. Verify the action with: Inspect FortiLink mode, physical or aggregate link state, switch authorization, VLAN interfaces and test-client path.

Incorrect Answers

A:

Correlate stack and ISL status to identify the failed path instead of reconfiguring all access VLANs. This action is relevant to Stack failure isolation and switch-to-switch port roles, not the controlling requirement in this case. A missing switch in a FortiLink managed chain may be caused by the upstream ISL even if its access ports still carry local traffic. The targeted response is: Use a supported direct FortiLink connection and confirm controller traffic and client forwarding on the intended interfaces.

C:

Assign FortiSwitch VLANs and ports to the intended FortiGate VDOM with explicit isolation and governed shared infrastructure. This action is relevant to FortiGate VDOM-based FortiSwitch tenant assignment, not the controlling requirement in this case. A VDOM creates a separate policy and routing context; it does not by itself make a shared physical switch port safe for all tenants. The targeted response is: Use a supported direct FortiLink connection and confirm controller traffic and client forwarding on the intended interfaces.

D:

Use documented peer-group and downstream trunk configuration for MCLAG rather than creating ad hoc parallel Ethernet links. This action is relevant to MCLAG multichassis access redundancy, not the controlling requirement in this case. MCLAG requires peer coordination and correct downstream aggregation; it is not equivalent to connecting independent switches in parallel. The targeted response is: Use a supported direct FortiLink connection and confirm controller traffic and client forwarding on the intended interfaces.

Question 737

An unknown device bypasses the intended quarantine profile because a static port policy takes precedence unexpectedly. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Inspect FortiLink mode, physical or aggregate link state, switch authorization, VLAN interfaces and test-client path.
  2. Review RADIUS Access-Accept attributes, CoA path, session identifier, switch port role, DACL installation and packet test.
  3. Inspect device fingerprint, policy rule order, assigned VLAN, security profile, client identity and enforcement state.
  4. Inspect MAC table usage, configured learning limit, learned device count, port-security event and violation action.

Explanation

Correct Answer

C:

Inspect device fingerprint, policy rule order, assigned VLAN, security profile, client identity and enforcement state. NAC assignment relies on reliable detection and a defined precedence; a class label is not a substitute for switch-port policy. The paired action is: Apply authorized device-class rules and dynamic port policies after confirming device detection evidence and fallback outcomes.

Incorrect Answers

A:

Inspect FortiLink mode, physical or aggregate link state, switch authorization, VLAN interfaces and test-client path. These observations are applicable to Single FortiGate and single FortiSwitch topology, but would not isolate the main failure first. The decisive evidence is: Inspect device fingerprint, policy rule order, assigned VLAN, security profile, client identity and enforcement state.

B:

Review RADIUS Access-Accept attributes, CoA path, session identifier, switch port role, DACL installation and packet test. These observations are applicable to RADIUS change of authorization and applied session policy, but would not isolate the main failure first. The decisive evidence is: Inspect device fingerprint, policy rule order, assigned VLAN, security profile, client identity and enforcement state.

D:

Inspect MAC table usage, configured learning limit, learned device count, port-security event and violation action. These observations are applicable to Port MAC learning-limit and violation controls, but would not isolate the main failure first. The decisive evidence is: Inspect device fingerprint, policy rule order, assigned VLAN, security profile, client identity and enforcement state.

Question 738

A data closet trunk sends untagged management frames into a partner's tagged-only management VLAN. Which FortiSwitch configuration or corrective action BEST addresses the requirement?

  1. Check that selected switch series and transceiver support split port or PHY breakout, and plan the related interface remapping.
  2. Create an appropriate FortiGate FortiLink physical or logical interface with supported addressing and controller capabilities before onboarding a switch.
  3. Assign the intended untagged native VLAN and explicitly permit tagged VLANs on an uplink; compare both ends before cutover.
  4. Validate the supported PoE budget and LLDP-MED endpoint power negotiation rather than equating link up with adequate wattage.

Explanation

Correct Answer

C:

Assign the intended untagged native VLAN and explicitly permit tagged VLANs on an uplink; compare both ends before cutover. Native VLAN handling and tagged VLAN membership are different controls; a working physical link does not validate VLAN carriage. Verify the action with: Inspect the port native VLAN, allowed VLAN list, peer tags, learned MACs and relevant FortiGate VLAN interface.

Incorrect Answers

A:

Check that selected switch series and transceiver support split port or PHY breakout, and plan the related interface remapping. This action is relevant to FortiSwitch split port breakout mode, not the controlling requirement in this case. A physical QSFP cage does not guarantee that four independent Ethernet child ports can be enabled on every model. The targeted response is: Assign the intended untagged native VLAN and explicitly permit tagged VLANs on an uplink; compare both ends before cutover.

B:

Create an appropriate FortiGate FortiLink physical or logical interface with supported addressing and controller capabilities before onboarding a switch. This action is relevant to FortiLink management interface provisioning, not the controlling requirement in this case. A FortiGate port not configured for FortiLink cannot assume managed-switch ownership from physical connection alone. The targeted response is: Assign the intended untagged native VLAN and explicitly permit tagged VLANs on an uplink; compare both ends before cutover.

D:

Validate the supported PoE budget and LLDP-MED endpoint power negotiation rather than equating link up with adequate wattage. This action is relevant to PoE and LLDP-MED endpoint power coordination, not the controlling requirement in this case. Port count and Ethernet link state do not guarantee sufficient power for high-draw endpoints. The targeted response is: Assign the intended untagged native VLAN and explicitly permit tagged VLANs on an uplink; compare both ends before cutover.

Question 739

A client cannot reach DHCP and an analyst captures a trunk that does not carry that client VLAN. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. Check captured port, protocol/MAC/IP filter, platform buffer capacity, capture timestamps and exported packet headers.
  2. Trace DHCP and ARP exchanges at ingress and uplink to distinguish missing requests from blocked or malformed responses.
  3. Create a bounded packet-capture profile on the right switch interface with a narrow filter, then start/stop and inspect frames.
  4. The suspect device is restricted without interrupting unrelated tenants and can be restored after review.
  5. Inspect mirror direction, source and destination ports, speed constraints, physical capture link and switch statistics.

Explanation

Correct Answers

A:

Check captured port, protocol/MAC/IP filter, platform buffer capacity, capture timestamps and exported packet headers. Packet captures are interface and filter scoped, and platform buffer limits differ; a capture file is not proof of all traffic on every switch port. The paired action is: Create a bounded packet-capture profile on the right switch interface with a narrow filter, then start/stop and inspect frames. This is the diagnostic or verification half of the requested TWO-step pair.

C:

Create a bounded packet-capture profile on the right switch interface with a narrow filter, then start/stop and inspect frames. Packet captures are interface and filter scoped, and platform buffer limits differ; a capture file is not proof of all traffic on every switch port. Verify the action with: Check captured port, protocol/MAC/IP filter, platform buffer capacity, capture timestamps and exported packet headers. This is the configuration or remediation half of the requested TWO-step pair.

Incorrect Answers

B:

Trace DHCP and ARP exchanges at ingress and uplink to distinguish missing requests from blocked or malformed responses. This step concerns Capture-based DHCP and ARP path isolation and is not part of the required paired solution. The correct action and evidence are: Create a bounded packet-capture profile on the right switch interface with a narrow filter, then start/stop and inspect frames. Together with: Check captured port, protocol/MAC/IP filter, platform buffer capacity, capture timestamps and exported packet headers.

D:

The suspect device is restricted without interrupting unrelated tenants and can be restored after review. This step concerns VLAN security policy and quarantine actions and is not part of the required paired solution. The correct action and evidence are: Create a bounded packet-capture profile on the right switch interface with a narrow filter, then start/stop and inspect frames. Together with: Check captured port, protocol/MAC/IP filter, platform buffer capacity, capture timestamps and exported packet headers.

E:

Inspect mirror direction, source and destination ports, speed constraints, physical capture link and switch statistics. This step concerns FortiSwitch port mirroring to network analyzer and is not part of the required paired solution. The correct action and evidence are: Create a bounded packet-capture profile on the right switch interface with a narrow filter, then start/stop and inspect frames. Together with: Check captured port, protocol/MAC/IP filter, platform buffer capacity, capture timestamps and exported packet headers.

Question 740

A cabinet with many cameras exceeds its switch PoE watt budget although enough physical ports exist. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. Use supported native and voice VLAN policies so phones and downstream workstations receive appropriate separate traffic treatment.
  2. FortiGate captures the suspected frames at the chosen observation point without altering the user traffic policy.
  3. Check client MAC learning, VLAN database, switch uplink tags, gateway ARP and port assignment on every hop.
  4. Inspect power supply reserve, current draw, negotiated PoE class, priority shedding and port events.
  5. Verify model-specific PoE class, total switch power budget and per-port policy before enabling new powered devices.

Explanation

Correct Answers

D:

Inspect power supply reserve, current draw, negotiated PoE class, priority shedding and port events. Not every FortiSwitch model or port supports identical PoE allocation or every attached device's peak draw. The paired action is: Verify model-specific PoE class, total switch power budget and per-port policy before enabling new powered devices. This is the diagnostic or verification half of the requested TWO-step pair.

E:

Verify model-specific PoE class, total switch power budget and per-port policy before enabling new powered devices. Not every FortiSwitch model or port supports identical PoE allocation or every attached device's peak draw. Verify the action with: Inspect power supply reserve, current draw, negotiated PoE class, priority shedding and port events. This is the configuration or remediation half of the requested TWO-step pair.

Incorrect Answers

A:

Use supported native and voice VLAN policies so phones and downstream workstations receive appropriate separate traffic treatment. This step concerns Voice and data VLAN separation on shared access ports and is not part of the required paired solution. The correct action and evidence are: Verify model-specific PoE class, total switch power budget and per-port policy before enabling new powered devices. Together with: Inspect power supply reserve, current draw, negotiated PoE class, priority shedding and port events.

B:

FortiGate captures the suspected frames at the chosen observation point without altering the user traffic policy. This step concerns FortiGate one-arm sniffer across managed switching and is not part of the required paired solution. The correct action and evidence are: Verify model-specific PoE class, total switch power budget and per-port policy before enabling new powered devices. Together with: Inspect power supply reserve, current draw, negotiated PoE class, priority shedding and port events.

C:

Check client MAC learning, VLAN database, switch uplink tags, gateway ARP and port assignment on every hop. This step concerns VLAN access isolation and troubleshooting of membership and is not part of the required paired solution. The correct action and evidence are: Verify model-specific PoE class, total switch power budget and per-port policy before enabling new powered devices. Together with: Inspect power supply reserve, current draw, negotiated PoE class, priority shedding and port events.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests