cert
cert-1
cert-2

Pass Fortinet NSE5_FSW_AD-7.6 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers to Pass the Actual Exam!
30 Days Free Updates, Instant Download!

cert-5
cert-6
NSE5_FSW_AD-7.6 Exam - Verified By Experts
NSE5_FSW_AD-7.6 Premium File

NSE5_FSW_AD-7.6 Premium File

$69.99
$76.99
  • Premium File 64 Questions & Answers. Last Update: Nov 15, 2026

Whats Included:

  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
 
$76.99
$69.99
accept 42 downloads in the last 7 days
block-screenshots
Fortinet NSE5_FSW_AD-7.6 Practice Test 76

Question 750

A second floor switch is cabled through an undocumented uplink and never appears in managed FortiSwitch inventory. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. The handset and attached workstation use the intended separate networks and retain their authorized access.
  2. The new FortiSwitch discovers the designated controller while unrelated FortiGate interfaces retain their normal function.
  3. The user VLAN reaches the authorized gateway without being placed on an unrelated physical FortiGate interface.
  4. Each intended managed switch appears with valid upstream connectivity and no unintended layer-2 loop.

Explanation

Correct Answer

D:

Each intended managed switch appears with valid upstream connectivity and no unintended layer-2 loop. The FortiGate-managed FortiSwitch stack is a managed L2 topology, not automatically a single chassis or universal VSF-like control plane.

Incorrect Answers

A:

The handset and attached workstation use the intended separate networks and retain their authorized access. This result relates to Voice and data VLAN separation on shared access ports, not the acceptance condition under test. The relevant result is: Each intended managed switch appears with valid upstream connectivity and no unintended layer-2 loop.

B:

The new FortiSwitch discovers the designated controller while unrelated FortiGate interfaces retain their normal function. This result relates to FortiLink management interface provisioning, not the acceptance condition under test. The relevant result is: Each intended managed switch appears with valid upstream connectivity and no unintended layer-2 loop.

C:

The user VLAN reaches the authorized gateway without being placed on an unrelated physical FortiGate interface. This result relates to FortiGate managed FortiSwitch VLAN interface placement, not the acceptance condition under test. The relevant result is: Each intended managed switch appears with valid upstream connectivity and no unintended layer-2 loop.

Question 751

A contractor requests a full week of unfiltered packet data from a production finance VLAN to diagnose one DHCP issue. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. Only intended traffic is accepted or rejected at the switch while allowed application sessions remain functional.
  2. Correlate LLDP neighbor inventory and VLAN-specific MAC entries to reconstruct actual endpoint and uplink paths.
  3. Use narrow capture windows, least-privilege access and approved storage/retention when collecting packet data for diagnostics.
  4. Review filter minimization, capture duration, administrator authorization, sensitive payloads and evidence-sharing restrictions.
  5. Inspect FortiGate FortiLink status, supported discovery port, LLDP frames, interface IP, link errors and switch serial.

Explanation

Correct Answers

C:

Use narrow capture windows, least-privilege access and approved storage/retention when collecting packet data for diagnostics. A packet-capture tool may record payloads and credentials, so evidence handling is part of the network security process. Verify the action with: Review filter minimization, capture duration, administrator authorization, sensitive payloads and evidence-sharing restrictions. This is the configuration or remediation half of the requested TWO-step pair.

D:

Review filter minimization, capture duration, administrator authorization, sensitive payloads and evidence-sharing restrictions. A packet-capture tool may record payloads and credentials, so evidence handling is part of the network security process. The paired action is: Use narrow capture windows, least-privilege access and approved storage/retention when collecting packet data for diagnostics. This is the diagnostic or verification half of the requested TWO-step pair.

Incorrect Answers

A:

Only intended traffic is accepted or rejected at the switch while allowed application sessions remain functional. This step concerns Static port ACL forwarding decisions and is not part of the required paired solution. The correct action and evidence are: Use narrow capture windows, least-privilege access and approved storage/retention when collecting packet data for diagnostics. Together with: Review filter minimization, capture duration, administrator authorization, sensitive payloads and evidence-sharing restrictions.

B:

Correlate LLDP neighbor inventory and VLAN-specific MAC entries to reconstruct actual endpoint and uplink paths. This step concerns LLDP and MAC forwarding table extraction and is not part of the required paired solution. The correct action and evidence are: Use narrow capture windows, least-privilege access and approved storage/retention when collecting packet data for diagnostics. Together with: Review filter minimization, capture duration, administrator authorization, sensitive payloads and evidence-sharing restrictions.

E:

Inspect FortiGate FortiLink status, supported discovery port, LLDP frames, interface IP, link errors and switch serial. This step concerns FortiLink discovery failure and physical uplink path and is not part of the required paired solution. The correct action and evidence are: Use narrow capture windows, least-privilege access and approved storage/retention when collecting packet data for diagnostics. Together with: Review filter minimization, capture duration, administrator authorization, sensitive payloads and evidence-sharing restrictions.

Question 752

A firewall-to-switch connection repeatedly flaps because each side assumes different negotiated speed. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. Troubleshooting evidence is sufficient to establish the fault without exporting unnecessary private communications.
  2. Expected members join the trunk and survive a member disconnect without loops or silent black holes.
  3. The correct link establishes at expected negotiated rate without recurring loss-of-signal or CRC errors.
  4. Both ends connect at compatible rates with stable errors and required throughput.

Explanation

Correct Answer

D:

Both ends connect at compatible rates with stable errors and required throughput. Incorrect forced port speed or duplex can mimic application loss even when the VLAN configuration is valid.

Incorrect Answers

A:

Troubleshooting evidence is sufficient to establish the fault without exporting unnecessary private communications. This result relates to Capture and confidentiality limits in incident response, not the acceptance condition under test. The relevant result is: Both ends connect at compatible rates with stable errors and required throughput.

B:

Expected members join the trunk and survive a member disconnect without loops or silent black holes. This result relates to Link aggregation and port error recovery, not the acceptance condition under test. The relevant result is: Both ends connect at compatible rates with stable errors and required throughput.

C:

The correct link establishes at expected negotiated rate without recurring loss-of-signal or CRC errors. This result relates to Optic compatibility and laser diagnostic evidence, not the acceptance condition under test. The relevant result is: Both ends connect at compatible rates with stable errors and required throughput.

Question 753

One access port has increasing CRC errors while its neighbor carries clean traffic under similar load. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Inspect monitoring credentials, SNMP version, sFlow export destination, sample rate, counter freshness and access policy.
  2. Review frame error type, CRC/FCS, traffic rates, drops, operational speed, port description and sampled timestamps.
  3. Review FortiGate/FortiSwitch version matrix, upgrade logs, auto-authorize state, synchronization events, switch restart and rollback image.
  4. Inspect MAC table usage, configured learning limit, learned device count, port-security event and violation action.

Explanation

Correct Answer

B:

Review frame error type, CRC/FCS, traffic rates, drops, operational speed, port description and sampled timestamps. A port-up indicator or one successful ping is not proof that a congested or errored uplink is healthy. The paired action is: Use FortiGate FortiSwitch Ports statistics or supported switch commands to isolate errors, utilization and port status at the right location.

Incorrect Answers

A:

Inspect monitoring credentials, SNMP version, sFlow export destination, sample rate, counter freshness and access policy. These observations are applicable to SNMP and sFlow monitoring configuration, but would not isolate the main failure first. The decisive evidence is: Review frame error type, CRC/FCS, traffic rates, drops, operational speed, port description and sampled timestamps.

C:

Review FortiGate/FortiSwitch version matrix, upgrade logs, auto-authorize state, synchronization events, switch restart and rollback image. These observations are applicable to FortiLink synchronization and upgrade troubleshooting, but would not isolate the main failure first. The decisive evidence is: Review frame error type, CRC/FCS, traffic rates, drops, operational speed, port description and sampled timestamps.

D:

Inspect MAC table usage, configured learning limit, learned device count, port-security event and violation action. These observations are applicable to Port MAC learning-limit and violation controls, but would not isolate the main failure first. The decisive evidence is: Review frame error type, CRC/FCS, traffic rates, drops, operational speed, port description and sampled timestamps.

Question 754

An MCLAG peer reports a keepalive or peer-link fault even though all physical uplink ports remain up. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. Inspect controller switch list, interface events, authentication logs, current configuration, timestamps and recent change history.
  2. The failed ISL or switch is isolated and recovered with all unaffected downstream switches remaining correctly managed.
  3. Inspect FortiGate HA active member, FortiLink aggregate state, ISL, MCLAG peer link, standby path and STP roles.
  4. Use FortiGate FortiSwitch Ports statistics or supported switch commands to isolate errors, utilization and port status at the right location.
  5. Identify FortiLink failures caused by split-interface, HA, MCLAG peer or ISL mismatches before changing unrelated ports.

Explanation

Correct Answers

C:

Inspect FortiGate HA active member, FortiLink aggregate state, ISL, MCLAG peer link, standby path and STP roles. FortiGate HA, FortiLink split-interface and FortiSwitch MCLAG have distinct failover behaviors that cannot be inferred from link LEDs alone. The paired action is: Identify FortiLink failures caused by split-interface, HA, MCLAG peer or ISL mismatches before changing unrelated ports. This is the diagnostic or verification half of the requested TWO-step pair.

E:

Identify FortiLink failures caused by split-interface, HA, MCLAG peer or ISL mismatches before changing unrelated ports. FortiGate HA, FortiLink split-interface and FortiSwitch MCLAG have distinct failover behaviors that cannot be inferred from link LEDs alone. Verify the action with: Inspect FortiGate HA active member, FortiLink aggregate state, ISL, MCLAG peer link, standby path and STP roles. This is the configuration or remediation half of the requested TWO-step pair.

Incorrect Answers

A:

Inspect controller switch list, interface events, authentication logs, current configuration, timestamps and recent change history. This step concerns FortiSwitch diagnostic commands and logs and is not part of the required paired solution. The correct action and evidence are: Identify FortiLink failures caused by split-interface, HA, MCLAG peer or ISL mismatches before changing unrelated ports. Together with: Inspect FortiGate HA active member, FortiLink aggregate state, ISL, MCLAG peer link, standby path and STP roles.

B:

The failed ISL or switch is isolated and recovered with all unaffected downstream switches remaining correctly managed. This step concerns Stack failure isolation and switch-to-switch port roles and is not part of the required paired solution. The correct action and evidence are: Identify FortiLink failures caused by split-interface, HA, MCLAG peer or ISL mismatches before changing unrelated ports. Together with: Inspect FortiGate HA active member, FortiLink aggregate state, ISL, MCLAG peer link, standby path and STP roles.

D:

Use FortiGate FortiSwitch Ports statistics or supported switch commands to isolate errors, utilization and port status at the right location. This step concerns Managed switch port statistics and counter analysis and is not part of the required paired solution. The correct action and evidence are: Identify FortiLink failures caused by split-interface, HA, MCLAG peer or ISL mismatches before changing unrelated ports. Together with: Inspect FortiGate HA active member, FortiLink aggregate state, ISL, MCLAG peer link, standby path and STP roles.

Question 755

A long full-packet trace fills the device RAM disk and discards the earliest evidence during an incident. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Inspect mirror direction, source and destination ports, speed constraints, physical capture link and switch statistics.
  2. Review queue maps, output drops, interface rate, strict versus weighted servicing and application latency.
  3. Check captured port, protocol/MAC/IP filter, platform buffer capacity, capture timestamps and exported packet headers.
  4. Check switch serial, active software version, current synchronized configuration, backup timestamp, integrity and recovery permissions.

Explanation

Correct Answer

C:

Check captured port, protocol/MAC/IP filter, platform buffer capacity, capture timestamps and exported packet headers. Packet captures are interface and filter scoped, and platform buffer limits differ; a capture file is not proof of all traffic on every switch port. The paired action is: Create a bounded packet-capture profile on the right switch interface with a narrow filter, then start/stop and inspect frames.

Incorrect Answers

A:

Inspect mirror direction, source and destination ports, speed constraints, physical capture link and switch statistics. These observations are applicable to FortiSwitch port mirroring to network analyzer, but would not isolate the main failure first. The decisive evidence is: Check captured port, protocol/MAC/IP filter, platform buffer capacity, capture timestamps and exported packet headers.

B:

Review queue maps, output drops, interface rate, strict versus weighted servicing and application latency. These observations are applicable to Egress priority scheduling and congestion visibility, but would not isolate the main failure first. The decisive evidence is: Check captured port, protocol/MAC/IP filter, platform buffer capacity, capture timestamps and exported packet headers.

D:

Check switch serial, active software version, current synchronized configuration, backup timestamp, integrity and recovery permissions. These observations are applicable to Config backup and firmware inventory evidence, but would not isolate the main failure first. The decisive evidence is: Check captured port, protocol/MAC/IP filter, platform buffer capacity, capture timestamps and exported packet headers.

Question 756

A phone ignores a newly created voice VLAN because the switch advertises an obsolete LLDP-MED network policy. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. Exactly the intended serial joins managed inventory and receives approved controller settings after authorization.
  2. Voice packets receive intended treatment without allowing arbitrary untrusted hosts to claim top priority.
  3. A capable handset reports the expected voice network policy and traffic uses the correct VLAN.
  4. The handset and attached workstation use the intended separate networks and retain their authorized access.

Explanation

Correct Answer

C:

A capable handset reports the expected voice network policy and traffic uses the correct VLAN. LLDP-MED exchanges policy hints with compatible endpoints; it does not substitute for port membership and DHCP.

Incorrect Answers

A:

Exactly the intended serial joins managed inventory and receives approved controller settings after authorization. This result relates to Discovered versus authorized FortiSwitch state, not the acceptance condition under test. The relevant result is: A capable handset reports the expected voice network policy and traffic uses the correct VLAN.

B:

Voice packets receive intended treatment without allowing arbitrary untrusted hosts to claim top priority. This result relates to QoS ingress classification and trust boundaries, not the acceptance condition under test. The relevant result is: A capable handset reports the expected voice network policy and traffic uses the correct VLAN.

D:

The handset and attached workstation use the intended separate networks and retain their authorized access. This result relates to Voice and data VLAN separation on shared access ports, not the acceptance condition under test. The relevant result is: A capable handset reports the expected voice network policy and traffic uses the correct VLAN.

Question 757

A replacement switch is installed without checking whether its old firmware supports the current FortiLink controller. Which FortiSwitch configuration or corrective action BEST addresses the requirement?

  1. Distinguish FortiSwitch discovery from authorization, and restore the correct controller ownership without automatically trusting unknown devices.
  2. Retrieve and maintain approved FortiSwitch model, firmware, configuration and authorized-controller records to support incident recovery.
  3. Set model-supported dynamic MAC address learning limits and specific violation action on access-facing switch ports.
  4. Use narrow capture windows, least-privilege access and approved storage/retention when collecting packet data for diagnostics.

Explanation

Correct Answer

B:

Retrieve and maintain approved FortiSwitch model, firmware, configuration and authorized-controller records to support incident recovery. Backups require correct model/version and an actual restore procedure; a saved file name is not proof a recovered switch will work. Verify the action with: Check switch serial, active software version, current synchronized configuration, backup timestamp, integrity and recovery permissions.

Incorrect Answers

A:

Distinguish FortiSwitch discovery from authorization, and restore the correct controller ownership without automatically trusting unknown devices. This action is relevant to Controller authorization and pending-switch state, not the controlling requirement in this case. Authorizing a switch is an administrative trust step; pending switch state is not evidence of a routing failure. The targeted response is: Retrieve and maintain approved FortiSwitch model, firmware, configuration and authorized-controller records to support incident recovery.

C:

Set model-supported dynamic MAC address learning limits and specific violation action on access-facing switch ports. This action is relevant to Port MAC learning-limit and violation controls, not the controlling requirement in this case. Dynamic MAC learning limits reduce accidental fan-out but should be tuned for legitimate multi-device access designs. The targeted response is: Retrieve and maintain approved FortiSwitch model, firmware, configuration and authorized-controller records to support incident recovery.

D:

Use narrow capture windows, least-privilege access and approved storage/retention when collecting packet data for diagnostics. This action is relevant to Capture and confidentiality limits in incident response, not the controlling requirement in this case. A packet-capture tool may record payloads and credentials, so evidence handling is part of the network security process. The targeted response is: Retrieve and maintain approved FortiSwitch model, firmware, configuration and authorized-controller records to support incident recovery.

Question 758

A VLAN on the firewall has an IP but no approved intra-VLAN or inter-VLAN policy for the intended client traffic. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. Check managed topology view, controller switch state, ISL port counters, peer LLDP and suspected link events.
  2. Trace MAC-learning and forwarding across the precise VLAN and repair only missing approved membership.
  3. Build FortiSwitch VLAN interfaces in the correct FortiLink context and assign ports through the managed switch controller.
  4. Check FortiLink parent, VLAN ID, VDOM membership, port assignment, subnet and firewall-policy path.
  5. Controller and switch return to supported synchronized software and configuration with test-client services restored.

Explanation

Correct Answers

C:

Build FortiSwitch VLAN interfaces in the correct FortiLink context and assign ports through the managed switch controller. A named VLAN in FortiOS is not proof its switch-port membership and L3 policy are correct. Verify the action with: Check FortiLink parent, VLAN ID, VDOM membership, port assignment, subnet and firewall-policy path. This is the configuration or remediation half of the requested TWO-step pair.

D:

Check FortiLink parent, VLAN ID, VDOM membership, port assignment, subnet and firewall-policy path. A named VLAN in FortiOS is not proof its switch-port membership and L3 policy are correct. The paired action is: Build FortiSwitch VLAN interfaces in the correct FortiLink context and assign ports through the managed switch controller. This is the diagnostic or verification half of the requested TWO-step pair.

Incorrect Answers

A:

Check managed topology view, controller switch state, ISL port counters, peer LLDP and suspected link events. This step concerns Stack failure isolation and switch-to-switch port roles and is not part of the required paired solution. The correct action and evidence are: Build FortiSwitch VLAN interfaces in the correct FortiLink context and assign ports through the managed switch controller. Together with: Check FortiLink parent, VLAN ID, VDOM membership, port assignment, subnet and firewall-policy path.

B:

Trace MAC-learning and forwarding across the precise VLAN and repair only missing approved membership. This step concerns VLAN access isolation and troubleshooting of membership and is not part of the required paired solution. The correct action and evidence are: Build FortiSwitch VLAN interfaces in the correct FortiLink context and assign ports through the managed switch controller. Together with: Check FortiLink parent, VLAN ID, VDOM membership, port assignment, subnet and firewall-policy path.

E:

Controller and switch return to supported synchronized software and configuration with test-client services restored. This step concerns FortiLink synchronization and upgrade troubleshooting and is not part of the required paired solution. The correct action and evidence are: Build FortiSwitch VLAN interfaces in the correct FortiLink context and assign ports through the managed switch controller. Together with: Check FortiLink parent, VLAN ID, VDOM membership, port assignment, subnet and firewall-policy path.

Question 759

An MCLAG access uplink fails after a peer link replacement and the team tests only physical LEDs. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. A rogue root candidate is blocked or a looped path remains safely contained without wiping all STP configuration.
  2. The user VLAN reaches the authorized gateway without being placed on an unrelated physical FortiGate interface.
  3. A downstream dual-homed switch retains service on one peer failure without duplicate independent forwarding loops.
  4. The expected known switch becomes authorized and synchronizes without accepting an unrelated device.

Explanation

Correct Answer

C:

A downstream dual-homed switch retains service on one peer failure without duplicate independent forwarding loops. MCLAG redundancy depends on supported peer-link and aggregate design; two cables alone do not constitute working multichassis aggregation.

Incorrect Answers

A:

A rogue root candidate is blocked or a looped path remains safely contained without wiping all STP configuration. This result relates to Root guard and loop guard failure response, not the acceptance condition under test. The relevant result is: A downstream dual-homed switch retains service on one peer failure without duplicate independent forwarding loops.

B:

The user VLAN reaches the authorized gateway without being placed on an unrelated physical FortiGate interface. This result relates to FortiGate managed FortiSwitch VLAN interface placement, not the acceptance condition under test. The relevant result is: A downstream dual-homed switch retains service on one peer failure without duplicate independent forwarding loops.

D:

The expected known switch becomes authorized and synchronizes without accepting an unrelated device. This result relates to Controller authorization and pending-switch state, not the acceptance condition under test. The relevant result is: A downstream dual-homed switch retains service on one peer failure without duplicate independent forwarding loops.

Question 760

A team claims an ACL encrypts traffic instead of recognizing its supported forwarding/filtering actions. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. Only intended traffic is accepted or rejected at the switch while allowed application sessions remain functional.
  2. The authenticated client receives the intended per-user or per-port restrictions and unauthenticated hosts do not inherit them.
  3. Authorized endpoints enter only permitted VLANs while failed authentication is denied or restricted according to policy.
  4. The correct link establishes at expected negotiated rate without recurring loss-of-signal or CRC errors.

Explanation

Correct Answer

A:

Only intended traffic is accepted or rejected at the switch while allowed application sessions remain functional. Switch ACLs and FortiGate firewall policies operate at different enforcement points; a deny on one does not prove the other applied.

Incorrect Answers

B:

The authenticated client receives the intended per-user or per-port restrictions and unauthenticated hosts do not inherit them. This result relates to DACL RADIUS attribute and per-session enforcement, not the acceptance condition under test. The relevant result is: Only intended traffic is accepted or rejected at the switch while allowed application sessions remain functional.

C:

Authorized endpoints enter only permitted VLANs while failed authentication is denied or restricted according to policy. This result relates to FortiSwitch 802.1X port-based authentication, not the acceptance condition under test. The relevant result is: Only intended traffic is accepted or rejected at the switch while allowed application sessions remain functional.

D:

The correct link establishes at expected negotiated rate without recurring loss-of-signal or CRC errors. This result relates to Optic compatibility and laser diagnostic evidence, not the acceptance condition under test. The relevant result is: Only intended traffic is accepted or rejected at the switch while allowed application sessions remain functional.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests