cert
cert-1
cert-2

Pass Cisco 500-220 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers to Pass the Actual Exam!
30 Days Free Updates, Instant Download!

cert-5
cert-6
500-220 Exam - Verified By Experts
500-220 Premium File

500-220 Premium File

$69.99
$76.99
  • Premium File 85 Questions & Answers. Last Update: Nov 13, 2026

Whats Included:

  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
 
$76.99
$69.99
accept 13 downloads in the last 7 days
block-screenshots
Cisco 500-220 Practice Test 47

Question 460

A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. A hospital secures the staff wired network with RADIUS but has configured only the MX firewall and no edge authenticator. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.

  1. Compare edge access policy, RADIUS response, assigned VLAN and MX permitted subnet flow.
  2. Check enrollment status, ownership classification, assigned profile capabilities and a sample compliance report.
  3. Place 802.1X enforcement on a supported access authenticator and coordinate the resulting VLAN with MX routing policy.
  4. Plan video retention against model capabilities, recording mode and compliance requirements before changing settings.
  5. Compare planned branch traffic aggregate, supported vMX scale, instance placement and failover path against requirements.

Explanation

Correct Answers

A:

The discriminating evidence is: Compare edge access policy, RADIUS response, assigned VLAN and MX permitted subnet flow.

C:

The targeted next step is: Place 802.1X enforcement on a supported access authenticator and coordinate the resulting VLAN with MX routing policy. The technical reason is: The security appliance's network-layer firewall policy does not by itself complete endpoint EAP authentication at a switch or WLAN port. A successful verification would use: Compare edge access policy, RADIUS response, assigned VLAN and MX permitted subnet flow.

Incorrect Answers

B:

That evidence is relevant to the distinct Meraki subject of Systems Manager managed enrollment versus BYOD privacy, not the specific MX access policies and switch-side authentication boundary requirement.

D:

That action is relevant to the distinct Meraki subject of MV camera retention and storage planning, not the specific MX access policies and switch-side authentication boundary requirement.

E:

That evidence is relevant to the distinct Meraki subject of Cloud concentrator scaling and failure domains, not the specific MX access policies and switch-side authentication boundary requirement.

Question 461

A Cisco Meraki deployment engineer investigates this operational case: An enterprise client authenticates at the MS switch yet receives a guest VLAN whose MX policy blocks the application. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.

  1. Place 802.1X enforcement on a supported access authenticator and coordinate the resulting VLAN with MX routing policy.
  2. Configure application-specific traffic shaping and flow preference using observed WAN behavior and a limited change plan.
  3. Apply guest SSID access, splash and LAN-isolation settings that preserve required DHCP, DNS and permitted Internet services.
  4. Use an authorized maintenance schedule and validate primary/secondary WAN or HA behavior for an MX firmware change.

Explanation

Correct Answer

A:

The targeted next step is: Place 802.1X enforcement on a supported access authenticator and coordinate the resulting VLAN with MX routing policy.

Incorrect Answers

B:

That action is relevant to the distinct Meraki subject of MX SD-WAN traffic preferences and shaping, not the specific MX access policies and switch-side authentication boundary requirement.

C:

That action is relevant to the distinct Meraki subject of MR guest SSID splash and isolation settings, not the specific MX access policies and switch-side authentication boundary requirement.

D:

That action is relevant to the distinct Meraki subject of MX firmware scheduled maintenance and WAN failover, not the specific MX access policies and switch-side authentication boundary requirement.

Question 462

A peer reviewer evaluates the following Meraki case. An enterprise client authenticates at the MS switch yet receives a guest VLAN whose MX policy blocks the application. The proposed action is: Place 802.1X enforcement on a supported access authenticator and coordinate the resulting VLAN with MX routing policy. Which technical principle BEST supports this decision? Select ONE best answer.

  1. An 802.1X enabled switch port needs the correct supplicant and server exchange, distinct from default VLAN forwarding.
  2. The security appliance's network-layer firewall policy does not by itself complete endpoint EAP authentication at a switch or WLAN port.
  3. SNMP polling samples device counters and state, and a single absolute counter is not equivalent to a measured rate.
  4. An MX can supply LAN VLAN interfaces and address service where supported; an IP conflict or wrong gateway breaks local network communication.

Explanation

Correct Answer

B:

The security appliance's network-layer firewall policy does not by itself complete endpoint EAP authentication at a switch or WLAN port. In this situation (An enterprise client authenticates at the MS switch yet receives a guest VLAN whose MX policy blocks the application.), it justifies the action: Place 802.1X enforcement on a supported access authenticator and coordinate the resulting VLAN with MX routing policy.

Incorrect Answers

A:

That principle is relevant to the distinct Meraki subject of MS 802.1X access control and RADIUS, not the specific MX access policies and switch-side authentication boundary requirement.

C:

That principle is relevant to the distinct Meraki subject of SNMP telemetry and counter interpretation, not the specific MX access policies and switch-side authentication boundary requirement.

D:

That principle is relevant to the distinct Meraki subject of MX VLAN interfaces and DHCP configuration, not the specific MX access policies and switch-side authentication boundary requirement.

Question 463

A Meraki support engineer must distinguish facts from assumptions. An enterprise client authenticates at the MS switch yet receives a guest VLAN whose MX policy blocks the application. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.

  1. Check the MX route list, downstream interface addressing and forward/return reachability to a test endpoint.
  2. Compare edge access policy, RADIUS response, assigned VLAN and MX permitted subnet flow.
  3. Compare configured hub priority, advertised networks and tunnel state during a controlled primary-hub outage.
  4. Inspect MS port configuration, VLAN tags, native VLAN choices and the endpoint's resulting IP lease.

Explanation

Correct Answer

B:

The discriminating evidence is: Compare edge access policy, RADIUS response, assigned VLAN and MX permitted subnet flow. Expected result: Authenticated endpoints receive the correct VLAN and only required upstream access.

Incorrect Answers

A:

That evidence is relevant to the distinct Meraki subject of MX static routes to downstream layer three network, not the specific MX access policies and switch-side authentication boundary requirement. For this scenario, the proper response is: Place 802.1X enforcement on a supported access authenticator and coordinate the resulting VLAN with MX routing policy. Verify it through: Compare edge access policy, RADIUS response, assigned VLAN and MX permitted subnet flow.

C:

That evidence is relevant to the distinct Meraki subject of Multi-hub Auto VPN resiliency and routing preference, not the specific MX access policies and switch-side authentication boundary requirement.

D:

That evidence is relevant to the distinct Meraki subject of MS access and trunk port VLAN assignment, not the specific MX access policies and switch-side authentication boundary requirement.

Question 464

An implementation lead needs a measurable acceptance criterion for a Meraki change. An enterprise client authenticates at the MS switch yet receives a guest VLAN whose MX policy blocks the application. The proposed validation is: Compare edge access policy, RADIUS response, assigned VLAN and MX permitted subnet flow. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.

  1. The appliance successfully establishes management communication while existing data policies remain scoped.
  2. Authorized clients obtain nonoverlapping addresses and reach their designated gateway and permitted resources.
  3. The field technician reports a specific management connectivity defect without unnecessarily resetting healthy equipment.
  4. Authenticated endpoints receive the correct VLAN and only required upstream access.

Explanation

Correct Answer

D:

The acceptance criterion is: Authenticated endpoints receive the correct VLAN and only required upstream access. Verify it using: Compare edge access policy, RADIUS response, assigned VLAN and MX permitted subnet flow.

Incorrect Answers

A:

That outcome is relevant to the distinct Meraki subject of Meraki device check-in requirements and upstream firewall rules, not the specific MX access policies and switch-side authentication boundary requirement.

B:

That outcome is relevant to the distinct Meraki subject of MX VLAN interfaces and DHCP configuration, not the specific MX access policies and switch-side authentication boundary requirement.

C:

That outcome is relevant to the distinct Meraki subject of Device local status page during cloud management loss, not the specific MX access policies and switch-side authentication boundary requirement.

Question 465

A Meraki operations reviewer examines this case. An enterprise client authenticates at the MS switch yet receives a guest VLAN whose MX policy blocks the application. Which assumption is the MOST DIRECTLY relevant unsafe or technically wrong shortcut to reject here? Select ONE best answer.

  1. Treat an MX L3 allow rule as proof that an attached unmanaged access switch is performing 802.1X authentication.
  2. Create an allow-any MX firewall rule as the only remedy for an absent static route to a warehouse VLAN.
  3. Use only maximum download Mbps to decide whether a WAN link is suitable for delay-sensitive voice.
  4. Force every site to use an identical overlapping LAN subnet merely because all are template-bound.

Explanation

Correct Answer

A:

It conflicts with the relevant behavior: The security appliance's network-layer firewall policy does not by itself complete endpoint EAP authentication at a switch or WLAN port.

Incorrect Answers

B:

That proposal is unsafe in its own context (the separate topic of MX static routes to downstream layer three network), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns MX access policies and switch-side authentication boundary: Treat an MX L3 allow rule as proof that an attached unmanaged access switch is performing 802.1X authentication.

C:

That proposal is unsafe in its own context (the separate topic of Performance-class loss latency and jitter thresholds), but it is not the shortcut tied most directly to this incident.

D:

That proposal is unsafe in its own context (the separate topic of Configuration templates and network binding), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns MX access policies and switch-side authentication boundary: Treat an MX L3 allow rule as proof that an attached unmanaged access switch is performing 802.1X authentication.

Question 466

A Cisco Meraki deployment engineer investigates this operational case: A new printer is connected to an MS port assigned to the guest VLAN rather than the server VLAN. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.

  1. Set a switch access port to the required VLAN and use supported tagged trunk connections for multi-VLAN uplinks.
  2. Review Air Marshal detections against an authorized SSID inventory and choose proportionate investigation instead of blindly blocking neighbors.
  3. Verify configured syslog event categories, remote collector reachability and timestamp alignment before concluding logs were never generated.
  4. Configure supported MS port access policies with a reachable RADIUS service and documented noncompliant-device handling.

Explanation

Correct Answer

A:

The targeted next step is: Set a switch access port to the required VLAN and use supported tagged trunk connections for multi-VLAN uplinks. The technical reason is: An access port normally carries one untagged client VLAN while a trunk can carry explicitly permitted tagged VLANs.

Incorrect Answers

B:

That action is relevant to the distinct Meraki subject of MR Air Marshal threat and rogue SSID monitoring, not the specific MS access and trunk port VLAN assignment requirement.

C:

That action is relevant to the distinct Meraki subject of Syslog event forwarding and remote collector reachability, not the specific MS access and trunk port VLAN assignment requirement.

D:

That action is relevant to the distinct Meraki subject of MS 802.1X access control and RADIUS, not the specific MS access and trunk port VLAN assignment requirement. For this scenario, the proper response is: Set a switch access port to the required VLAN and use supported tagged trunk connections for multi-VLAN uplinks.

Question 467

A peer reviewer evaluates the following Meraki case. A new printer is connected to an MS port assigned to the guest VLAN rather than the server VLAN. The proposed action is: Set a switch access port to the required VLAN and use supported tagged trunk connections for multi-VLAN uplinks. Which technical principle BEST supports this decision? Select ONE best answer.

  1. Rogue or interfering AP observations require classification; an external neighboring AP is not automatically malicious corporate infrastructure.
  2. A missing or mismatched VLAN tag can prevent DHCP or gateway reachability while other VLANs work on the same physical uplink.
  3. A routing-capable MS requires configured L3 interfaces and routes to forward between subnets; VLAN creation is not sufficient.
  4. An access port normally carries one untagged client VLAN while a trunk can carry explicitly permitted tagged VLANs.

Explanation

Correct Answer

D:

An access port normally carries one untagged client VLAN while a trunk can carry explicitly permitted tagged VLANs. In this situation (A new printer is connected to an MS port assigned to the guest VLAN rather than the server VLAN.), it justifies the action: Set a switch access port to the required VLAN and use supported tagged trunk connections for multi-VLAN uplinks.

Incorrect Answers

A:

That principle is relevant to the distinct Meraki subject of MR Air Marshal threat and rogue SSID monitoring, not the specific MS access and trunk port VLAN assignment requirement. For this scenario, the proper response is: Set a switch access port to the required VLAN and use supported tagged trunk connections for multi-VLAN uplinks.

B:

That principle is relevant to the distinct Meraki subject of VLAN trunk mismatch and missing DHCP across MS links, not the specific MS access and trunk port VLAN assignment requirement.

C:

Verify it through: Inspect MS port configuration, VLAN tags, native VLAN choices and the endpoint's resulting IP lease.

Question 468

A Meraki support engineer must distinguish facts from assumptions. A new printer is connected to an MS port assigned to the guest VLAN rather than the server VLAN. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.

  1. Inspect approved maintenance settings, stack member upgrade state and representative PoE/VLAN client recovery.
  2. Inspect the Site-to-site VPN topology, hub selection and route advertisements for the affected branch.
  3. Compare source and destination port roles, VLANs, PoE, labels and actual endpoint connectivity.
  4. Inspect MS port configuration, VLAN tags, native VLAN choices and the endpoint's resulting IP lease.

Explanation

Correct Answer

D:

The discriminating evidence is: Inspect MS port configuration, VLAN tags, native VLAN choices and the endpoint's resulting IP lease. Expected result: A client reaches its intended subnet and no unauthorized VLAN is transported to an access port.

Incorrect Answers

A:

That evidence is relevant to the distinct Meraki subject of MS firmware and switch stack sequencing, not the specific MS access and trunk port VLAN assignment requirement.

B:

That evidence is relevant to the distinct Meraki subject of Auto VPN hub-and-spoke site reachability, not the specific MS access and trunk port VLAN assignment requirement. For this scenario, the proper response is: Set a switch access port to the required VLAN and use supported tagged trunk connections for multi-VLAN uplinks.

C:

That evidence is relevant to the distinct Meraki subject of MS configuration templates and switch port cloning, not the specific MS access and trunk port VLAN assignment requirement. For this scenario, the proper response is: Set a switch access port to the required VLAN and use supported tagged trunk connections for multi-VLAN uplinks.

Question 469

An implementation lead needs a measurable acceptance criterion for a Meraki change. A new printer is connected to an MS port assigned to the guest VLAN rather than the server VLAN. The proposed validation is: Inspect MS port configuration, VLAN tags, native VLAN choices and the endpoint's resulting IP lease. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.

  1. A client reaches its intended subnet and no unauthorized VLAN is transported to an access port.
  2. New access ports match the approved role while exceptional trunk and security settings remain correct.
  3. The branch receives shared security settings while retaining its correct local VLAN and addressing requirements.
  4. Both older and newer clients connect through documented supported bands without unnecessary interference.

Explanation

Correct Answer

A:

The acceptance criterion is: A client reaches its intended subnet and no unauthorized VLAN is transported to an access port. Verify it using: Inspect MS port configuration, VLAN tags, native VLAN choices and the endpoint's resulting IP lease.

Incorrect Answers

B:

That outcome is relevant to the distinct Meraki subject of MS configuration templates and switch port cloning, not the specific MS access and trunk port VLAN assignment requirement.

C:

That outcome is relevant to the distinct Meraki subject of Configuration templates and network binding, not the specific MS access and trunk port VLAN assignment requirement.

D:

That outcome is relevant to the distinct Meraki subject of MR RF profile and band planning across device generations, not the specific MS access and trunk port VLAN assignment requirement.

Question 470

A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. A new printer is connected to an MS port assigned to the guest VLAN rather than the server VLAN. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.

  1. Inspect MS port configuration, VLAN tags, native VLAN choices and the endpoint's resulting IP lease.
  2. Check peer state, accepted and advertised prefixes and next-hop reachability at the intended datacenter edge.
  3. Inspect the Site-to-site VPN topology, hub selection and route advertisements for the affected branch.
  4. Set a switch access port to the required VLAN and use supported tagged trunk connections for multi-VLAN uplinks.
  5. Compare spectrum survey, channel overlap, expected client count, airtime use and retries at peak occupancy.

Explanation

Correct Answers

A:

The discriminating evidence is: Inspect MS port configuration, VLAN tags, native VLAN choices and the endpoint's resulting IP lease.

D:

The targeted next step is: Set a switch access port to the required VLAN and use supported tagged trunk connections for multi-VLAN uplinks. The technical reason is: An access port normally carries one untagged client VLAN while a trunk can carry explicitly permitted tagged VLANs. A successful verification would use: Inspect MS port configuration, VLAN tags, native VLAN choices and the endpoint's resulting IP lease.

Incorrect Answers

B:

That evidence is relevant to the distinct Meraki subject of BGP route exchange at VPN hub and datacenter, not the specific MS access and trunk port VLAN assignment requirement.

C:

That evidence is relevant to the distinct Meraki subject of Auto VPN hub-and-spoke site reachability, not the specific MS access and trunk port VLAN assignment requirement. For this scenario, the proper response is: Set a switch access port to the required VLAN and use supported tagged trunk connections for multi-VLAN uplinks. Verify it through: Inspect MS port configuration, VLAN tags, native VLAN choices and the endpoint's resulting IP lease.

E:

That evidence is relevant to the distinct Meraki subject of High-density RF channel and AP count planning, not the specific MS access and trunk port VLAN assignment requirement.

Cisco Meraki Solutions Specialist (500-220) Practice Tests