Cisco 350-601 Practice Test 112
Question 1110
Two routing devices have the same keychain name but different current key IDs and send authenticated packets that fail validation. The observed failure is: uncoordinated rotation can drop legitimate control-plane messages and cause routing instability. Which recovery action addresses the underlying technical fault?
- The controlled remediation is to assume matching keychain labels guarantee matching cryptographic secrets.
- The controlled remediation is to stage overlapping valid keys and verify authenticated adjacency through planned rotation.
- The controlled remediation is to disable all routing authentication without a compensating policy.
- The controlled remediation is to change only the local hostname to match the keychain.
Explanation
Correct Answer
B:This addresses the observable fault while preserving a check of the expected result. Validate against keychain ID and lifetime settings, routing authentication logs and adjacency recovery.
Incorrect Answers
A:Assume matching keychain labels guarantee matching cryptographic secrets. This would not reliably restore service after the stated fault. Uncoordinated rotation can drop legitimate control-plane messages and cause routing instability. The controlled recovery is to stage overlapping valid keys and verify authenticated adjacency through planned rotation.
C:Disable all routing authentication without a compensating policy. This would not reliably restore service after the stated fault. Uncoordinated rotation can drop legitimate control-plane messages and cause routing instability. The controlled recovery is to stage overlapping valid keys and verify authenticated adjacency through planned rotation.
D:Change only the local hostname to match the keychain. This would not reliably restore service after the stated fault. Uncoordinated rotation can drop legitimate control-plane messages and cause routing instability. The controlled recovery is to stage overlapping valid keys and verify authenticated adjacency through planned rotation.
Question 1111
A data center inter-switch link transports sensitive traffic unencrypted despite platform support for MACsec. Which next step should the data center engineer select?
- Rely on plain VLAN tags as a substitute for link encryption.
- Use Fibre Channel zoning to encrypt all Ethernet MACsec frames.
- Configure compatible MACsec and MKA key agreement and policy on both supported Ethernet endpoints.
- Disable all key agreement and assume traffic becomes encrypted automatically.
Explanation
Correct Answer
C:This directly addresses MACsec link-layer encryption because MACsec secures Ethernet links using peer agreement and authenticated encryption at the link layer. Confirm the change against MACsec session status, MKA association, active cipher suite, interface counters and encryption state.
Incorrect Answers
A:A one-sided or mismatched MACsec setup cannot establish protected traffic as intended. The relevant correction is to configure compatible MACsec and MKA key agreement and policy on both supported Ethernet endpoints.
B:Use Fibre Channel zoning to encrypt all Ethernet MACsec frames. The proposed change targets the wrong mechanism or lacks essential validation. MACsec secures Ethernet links using peer agreement and authenticated encryption at the link layer. Relevant evidence is MACsec session status, MKA association, active cipher suite, interface counters and encryption state.
D:A one-sided or mismatched MACsec setup cannot establish protected traffic as intended. The appropriate action remains to configure compatible MACsec and MKA key agreement and policy on both supported Ethernet endpoints.
Question 1112
A data center inter-switch link transports sensitive traffic unencrypted despite platform support for MACsec. Which diagnostic record would most strongly confirm the result?
- An old role mapping that ignores the observed denial or unwanted permission.
- A green link LED without confirming authentication, inspection or encryption state.
- A signed design diagram that lacks current access-policy or violation counters.
- MACsec session status, MKA association, active cipher suite, interface counters and encryption state.
Explanation
Correct Answer
D:These observations test the actual MACsec link-layer encryption mechanism rather than a superficial management status. MACsec secures Ethernet links using peer agreement and authenticated encryption at the link layer.
Incorrect Answers
A:An old role mapping that ignores the observed denial or unwanted permission. This information cannot independently verify MACsec link-layer encryption. The decisive records instead include MACsec session status, MKA association, active cipher suite, interface counters and encryption state. MACsec secures Ethernet links using peer agreement and authenticated encryption at the link layer.
B:A green link LED without confirming authentication, inspection or encryption state. This information cannot independently verify MACsec link-layer encryption. The decisive records instead include MACsec session status, MKA association, active cipher suite, interface counters and encryption state. MACsec secures Ethernet links using peer agreement and authenticated encryption at the link layer.
C:A signed design diagram that lacks current access-policy or violation counters. This information cannot independently verify MACsec link-layer encryption. The decisive records instead include MACsec session status, MKA association, active cipher suite, interface counters and encryption state. MACsec secures Ethernet links using peer agreement and authenticated encryption at the link layer.
Question 1113
A data center inter-switch link transports sensitive traffic unencrypted despite platform support for MACsec. Which platform concept should guide the engineer’s assessment?
- MACsec secures Ethernet links using peer agreement and authenticated encryption at the link layer.
- One security mechanism always replaces all other layer-specific access controls.
- All traffic within a VLAN is necessarily authorized regardless of identity or policy.
- A recognized device name establishes authentication and trust without checking keys.
Explanation
Correct Answer
A:Validation depends on MACsec session status, MKA association, active cipher suite, interface counters and encryption state. This explains why the most appropriate response is to configure compatible MACsec and MKA key agreement and policy on both supported Ethernet endpoints.
Incorrect Answers
B:One security mechanism always replaces all other layer-specific access controls. This is an incorrect generalization for MACsec link-layer encryption. The applicable technical behavior is that MACsec secures Ethernet links using peer agreement and authenticated encryption at the link layer. The operator should verify MACsec session status, MKA association, active cipher suite, interface counters and encryption state.
C:All traffic within a VLAN is necessarily authorized regardless of identity or policy. This is an incorrect generalization for MACsec link-layer encryption. The applicable technical behavior is that MACsec secures Ethernet links using peer agreement and authenticated encryption at the link layer. The operator should verify MACsec session status, MKA association, active cipher suite, interface counters and encryption state.
D:A recognized device name establishes authentication and trust without checking keys. This is an incorrect generalization for MACsec link-layer encryption. The applicable technical behavior is that MACsec secures Ethernet links using peer agreement and authenticated encryption at the link layer. The operator should verify MACsec session status, MKA association, active cipher suite, interface counters and encryption state.
Question 1114
A data center inter-switch link transports sensitive traffic unencrypted despite platform support for MACsec. Assume an engineer instead chooses to rely on plain VLAN tags as a substitute for link encryption. Which root-cause observation follows from that incorrect change?
- Reviewing an ACI contract causes the pre-existing permit rule to vanish.
- A one-sided or mismatched MACsec setup cannot establish protected traffic as intended.
- Testing one denied unauthorized connection proves the policy was absent.
- A correctly scoped role assignment is the source of the earlier over-privilege.
Explanation
Correct Answer
B:The proper corrective action is to configure compatible MACsec and MKA key agreement and policy on both supported Ethernet endpoints. That is the direct consequence of choosing the misleading shortcut.
Incorrect Answers
A:This does not explain the actual MACsec link-layer encryption defect after the shortcut. The meaningful failure is that a one-sided or mismatched MACsec setup cannot establish protected traffic as intended.
C:This does not explain the actual MACsec link-layer encryption defect after the shortcut. The relevant evidence is MACsec session status, MKA association, active cipher suite, interface counters and encryption state.
D:This does not explain the actual MACsec link-layer encryption defect after the shortcut. A correctly scoped role assignment is the source of the earlier over-privilege.
Question 1115
A data center inter-switch link transports sensitive traffic unencrypted despite platform support for MACsec. The observed failure is: a one-sided or mismatched MACsec setup cannot establish protected traffic as intended. Which recovery action addresses the underlying technical fault?
- Use Fibre Channel zoning to encrypt all Ethernet MACsec frames.
- Disable all key agreement and assume traffic becomes encrypted automatically.
- Align compatible MKA parameters and verify encrypt and decrypt counters on both ends.
- Rely on plain VLAN tags as a substitute for link encryption.
Explanation
Correct Answer
C:Validate against MACsec session status, MKA association, active cipher suite, interface counters and encryption state. This addresses the observable fault while preserving a check of the expected result.
Incorrect Answers
A:Use Fibre Channel zoning to encrypt all Ethernet MACsec frames. This would not reliably restore service after the stated fault. A one-sided or mismatched MACsec setup cannot establish protected traffic as intended. The controlled recovery is to align compatible MKA parameters and verify encrypt and decrypt counters on both ends.
B:Disable all key agreement and assume traffic becomes encrypted automatically. This would not reliably restore service after the stated fault. A one-sided or mismatched MACsec setup cannot establish protected traffic as intended. The controlled recovery is to align compatible MKA parameters and verify encrypt and decrypt counters on both ends.
D:Rely on plain VLAN tags as a substitute for link encryption. This would not reliably restore service after the stated fault. A one-sided or mismatched MACsec setup cannot establish protected traffic as intended. The controlled recovery is to align compatible MKA parameters and verify encrypt and decrypt counters on both ends.
Question 1116
An NX-OS link with MACsec configured on one side fails to encrypt because peer key agreement parameters differ. What is the BEST supported implementation or corrective action?
- On this affected device, the engineer should use Fibre Channel zoning to encrypt all Ethernet MACsec frames.
- On this affected device, the engineer should disable all key agreement and assume traffic becomes encrypted automatically.
- On this affected device, the engineer should rely on plain VLAN tags as a substitute for link encryption.
- On this affected device, the engineer should configure compatible MACsec and MKA key agreement and policy on both supported Ethernet endpoints.
Explanation
Correct Answer
D:This directly addresses MACsec link-layer encryption because MACsec secures Ethernet links using peer agreement and authenticated encryption at the link layer. In the given case, an NX-OS link with MACsec configured on one side fails to encrypt because peer key agreement parameters differ.
Incorrect Answers
A:Use Fibre Channel zoning to encrypt all Ethernet MACsec frames. The proposed change targets the wrong mechanism or lacks essential validation. MACsec secures Ethernet links using peer agreement and authenticated encryption at the link layer. Relevant evidence is MACsec session status, MKA association, active cipher suite, interface counters and encryption state.
B:A one-sided or mismatched MACsec setup cannot establish protected traffic as intended. In the given case, an NX-OS link with MACsec configured on one side fails to encrypt because peer key agreement parameters differ.
C:A one-sided or mismatched MACsec setup cannot establish protected traffic as intended. Rely on plain VLAN tags as a substitute for link encryption.
Question 1117
An NX-OS link with MACsec configured on one side fails to encrypt because peer key agreement parameters differ. Which evidence BEST verifies the intended technical behavior?
- For this deployment, examine MACsec session status, MKA association, active cipher suite, interface counters and encryption state.
- For this deployment, examine a user account name without the effective role or security enforcement record.
- For this deployment, examine an old role mapping that ignores the observed denial or unwanted permission.
- For this deployment, examine a green link LED without confirming authentication, inspection or encryption state.
Explanation
Correct Answer
A:These observations test the actual MACsec link-layer encryption mechanism rather than a superficial management status. They should be checked after configure compatible MACsec and MKA key agreement and policy on both supported Ethernet endpoints.
Incorrect Answers
B:A user account name without the effective role or security enforcement record. This information cannot independently verify MACsec link-layer encryption. The decisive records instead include MACsec session status, MKA association, active cipher suite, interface counters and encryption state. MACsec secures Ethernet links using peer agreement and authenticated encryption at the link layer.
C:An old role mapping that ignores the observed denial or unwanted permission. This information cannot independently verify MACsec link-layer encryption. The decisive records instead include MACsec session status, MKA association, active cipher suite, interface counters and encryption state. MACsec secures Ethernet links using peer agreement and authenticated encryption at the link layer.
D:A green link LED without confirming authentication, inspection or encryption state. This information cannot independently verify MACsec link-layer encryption. The decisive records instead include MACsec session status, MKA association, active cipher suite, interface counters and encryption state. MACsec secures Ethernet links using peer agreement and authenticated encryption at the link layer.
Question 1118
An NX-OS link with MACsec configured on one side fails to encrypt because peer key agreement parameters differ. Which principle BEST explains why the recommended solution is appropriate?
- For this condition, the applicable principle is that a recognized device name establishes authentication and trust without checking keys.
- For this condition, the applicable principle is that MACsec secures Ethernet links using peer agreement and authenticated encryption at the link layer.
- For this condition, the applicable principle is that one security mechanism always replaces all other layer-specific access controls.
- For this condition, the applicable principle is that successful login automatically grants every management privilege.
Explanation
Correct Answer
B:Validation depends on MACsec session status, MKA association, active cipher suite, interface counters and encryption state.
Incorrect Answers
A:A recognized device name establishes authentication and trust without checking keys. This is an incorrect generalization for MACsec link-layer encryption. The applicable technical behavior is that MACsec secures Ethernet links using peer agreement and authenticated encryption at the link layer. The operator should verify MACsec session status, MKA association, active cipher suite, interface counters and encryption state.
C:One security mechanism always replaces all other layer-specific access controls. This is an incorrect generalization for MACsec link-layer encryption. The applicable technical behavior is that MACsec secures Ethernet links using peer agreement and authenticated encryption at the link layer. The operator should verify MACsec session status, MKA association, active cipher suite, interface counters and encryption state.
D:Successful login automatically grants every management privilege. This is an incorrect generalization for MACsec link-layer encryption. The applicable technical behavior is that MACsec secures Ethernet links using peer agreement and authenticated encryption at the link layer. The operator should verify MACsec session status, MKA association, active cipher suite, interface counters and encryption state.
Question 1119
An NX-OS link with MACsec configured on one side fails to encrypt because peer key agreement parameters differ. Assume an engineer instead chooses to rely on plain VLAN tags as a substitute for link encryption. What is the MOST significant failure introduced by that shortcut?
- The resulting defect is that a correctly scoped role assignment is the source of the earlier over-privilege.
- The resulting defect is that auditing administrative actions is the cause of the initial unauthorized access.
- The resulting defect is that a one-sided or mismatched MACsec setup cannot establish protected traffic as intended.
- The resulting defect is that testing one denied unauthorized connection proves the policy was absent.
Explanation
Correct Answer
C:The proper corrective action is to configure compatible MACsec and MKA key agreement and policy on both supported Ethernet endpoints. MACsec secures Ethernet links using peer agreement and authenticated encryption at the link layer.
Incorrect Answers
A:This does not explain the actual MACsec link-layer encryption defect after the shortcut. In the given case, an NX-OS link with MACsec configured on one side fails to encrypt because peer key agreement parameters differ.
B:This does not explain the actual MACsec link-layer encryption defect after the shortcut. Auditing administrative actions is the cause of the initial unauthorized access.
D:This does not explain the actual MACsec link-layer encryption defect after the shortcut. Testing one denied unauthorized connection proves the policy was absent.
Question 1120
An NX-OS link with MACsec configured on one side fails to encrypt because peer key agreement parameters differ. The observed failure is: a one-sided or mismatched MACsec setup cannot establish protected traffic as intended. What is the BEST controlled recovery once this failure is recognized?
- The controlled remediation is to disable all key agreement and assume traffic becomes encrypted automatically.
- The controlled remediation is to rely on plain VLAN tags as a substitute for link encryption.
- The controlled remediation is to use Fibre Channel zoning to encrypt all Ethernet MACsec frames.
- The controlled remediation is to align compatible MKA parameters and verify encrypt and decrypt counters on both ends.
Explanation
Correct Answer
D:Validate against MACsec session status, MKA association, active cipher suite, interface counters and encryption state. MACsec secures Ethernet links using peer agreement and authenticated encryption at the link layer.
Incorrect Answers
A:Disable all key agreement and assume traffic becomes encrypted automatically. This would not reliably restore service after the stated fault. A one-sided or mismatched MACsec setup cannot establish protected traffic as intended. The controlled recovery is to align compatible MKA parameters and verify encrypt and decrypt counters on both ends.
B:Rely on plain VLAN tags as a substitute for link encryption. This would not reliably restore service after the stated fault. A one-sided or mismatched MACsec setup cannot establish protected traffic as intended. The controlled recovery is to align compatible MKA parameters and verify encrypt and decrypt counters on both ends.
C:Use Fibre Channel zoning to encrypt all Ethernet MACsec frames. This would not reliably restore service after the stated fault. A one-sided or mismatched MACsec setup cannot establish protected traffic as intended. The controlled recovery is to align compatible MKA parameters and verify encrypt and decrypt counters on both ends.