Cisco 350-601 Practice Test 105
Question 1040
An infrastructure team creates a custom NX-OS role whose rule matches more commands than intended. The observed failure is: overbroad permissions undermine separation of duties and permit unauthorized changes. What is the BEST controlled recovery once this failure is recognized?
- The controlled remediation is to disable authorization checks when custom roles require review.
- The controlled remediation is to rely on switch interface descriptions to enforce management privilege.
- The controlled remediation is to use one shared root credential for all users to simplify auditing.
- The controlled remediation is to restrict the role, test permitted and denied commands, and verify session assignments.
Explanation
Correct Answer
D:This addresses the observable fault while preserving a check of the expected result. Validate against role definitions, assigned users, authorized command tests and accounting logs.
Incorrect Answers
A:Disable authorization checks when custom roles require review. This would not reliably restore service after the stated fault. Overbroad permissions undermine separation of duties and permit unauthorized changes. The controlled recovery is to restrict the role, test permitted and denied commands, and verify session assignments.
B:Rely on switch interface descriptions to enforce management privilege. This would not reliably restore service after the stated fault. Overbroad permissions undermine separation of duties and permit unauthorized changes. The controlled recovery is to restrict the role, test permitted and denied commands, and verify session assignments.
C:Use one shared root credential for all users to simplify auditing. This would not reliably restore service after the stated fault. Overbroad permissions undermine separation of duties and permit unauthorized changes. The controlled recovery is to restrict the role, test permitted and denied commands, and verify session assignments.
Question 1041
Two ACI EPGs are attached correctly but traffic between them is blocked because no contract permits the required service. What is the BEST supported implementation or corrective action?
- Attach the specific ACI contract and filter to the correct provider and consumer EPGs.
- Disable tenant isolation by putting all servers into one shared EPG.
- Assume an IP route automatically permits all inter-EPG sessions.
- Assign new server WWPNs to bypass ACI contracts.
Explanation
Correct Answer
A:This directly addresses ACI contract permit rules because ACI contracts express permitted traffic between EPGs; physical reachability does not imply inter-EPG permission. Confirm the change against aPIC contract subjects, TCP filter entries, provider and consumer relationships and contract hit or flow evidence.
Incorrect Answers
B:Disable tenant isolation by putting all servers into one shared EPG. This is not a valid substitute for the specified fix. Missing or wrongly directed contract relationships block otherwise routable application flows. The relevant correction is to attach the specific ACI contract and filter to the correct provider and consumer EPGs.
C:Assume an IP route automatically permits all inter-EPG sessions. The proposed change targets the wrong mechanism or lacks essential validation. ACI contracts express permitted traffic between EPGs; physical reachability does not imply inter-EPG permission. Relevant evidence is aPIC contract subjects, TCP filter entries, provider and consumer relationships and contract hit or flow evidence.
D:Assign new server WWPNs to bypass ACI contracts. This would leave the diagnosed requirement unresolved. Missing or wrongly directed contract relationships block otherwise routable application flows. The appropriate action remains to attach the specific ACI contract and filter to the correct provider and consumer EPGs.
Question 1042
Two ACI EPGs are attached correctly but traffic between them is blocked because no contract permits the required service. Which evidence BEST verifies the intended technical behavior?
- A green link LED without confirming authentication, inspection or encryption state.
- APIC contract subjects, TCP filter entries, provider and consumer relationships and contract hit or flow evidence.
- A user account name without the effective role or security enforcement record.
- An old role mapping that ignores the observed denial or unwanted permission.
Explanation
Correct Answer
B:These observations test the actual ACI contract permit rules mechanism rather than a superficial management status. ACI contracts express permitted traffic between EPGs; physical reachability does not imply inter-EPG permission.
Incorrect Answers
A:This information cannot independently verify ACI contract permit rules. The decisive records instead include aPIC contract subjects, TCP filter entries, provider and consumer relationships and contract hit or flow evidence.
C:This information cannot independently verify ACI contract permit rules. ACI contracts express permitted traffic between EPGs; physical reachability does not imply inter-EPG permission.
D:This information cannot independently verify ACI contract permit rules. In the given case, two ACI EPGs are attached correctly but traffic between them is blocked because no contract permits the required service.
Question 1043
Two ACI EPGs are attached correctly but traffic between them is blocked because no contract permits the required service. Which principle BEST explains why the recommended solution is appropriate?
- Successful login automatically grants every management privilege.
- A recognized device name establishes authentication and trust without checking keys.
- ACI contracts express permitted traffic between EPGs; physical reachability does not imply inter-EPG permission.
- One security mechanism always replaces all other layer-specific access controls.
Explanation
Correct Answer
C:Validation depends on aPIC contract subjects, TCP filter entries, provider and consumer relationships and contract hit or flow evidence. This explains why the most appropriate response is to attach the specific ACI contract and filter to the correct provider and consumer EPGs.
Incorrect Answers
A:Successful login automatically grants every management privilege. This is an incorrect generalization for ACI contract permit rules. The applicable technical behavior is that ACI contracts express permitted traffic between EPGs; physical reachability does not imply inter-EPG permission. The operator should verify aPIC contract subjects, TCP filter entries, provider and consumer relationships and contract hit or flow evidence.
B:A recognized device name establishes authentication and trust without checking keys. This is an incorrect generalization for ACI contract permit rules. The applicable technical behavior is that ACI contracts express permitted traffic between EPGs; physical reachability does not imply inter-EPG permission. The operator should verify aPIC contract subjects, TCP filter entries, provider and consumer relationships and contract hit or flow evidence.
D:One security mechanism always replaces all other layer-specific access controls. This is an incorrect generalization for ACI contract permit rules. The applicable technical behavior is that ACI contracts express permitted traffic between EPGs; physical reachability does not imply inter-EPG permission. The operator should verify aPIC contract subjects, TCP filter entries, provider and consumer relationships and contract hit or flow evidence.
Question 1044
Two ACI EPGs are attached correctly but traffic between them is blocked because no contract permits the required service. Assume an engineer instead chooses to disable tenant isolation by putting all servers into one shared EPG. What is the MOST significant failure introduced by that shortcut?
- Testing one denied unauthorized connection proves the policy was absent.
- A correctly scoped role assignment is the source of the earlier over-privilege.
- Auditing administrative actions is the cause of the initial unauthorized access.
- Missing or wrongly directed contract relationships block otherwise routable application flows.
Explanation
Correct Answer
D:The proper corrective action is to attach the specific ACI contract and filter to the correct provider and consumer EPGs. ACI contracts express permitted traffic between EPGs; physical reachability does not imply inter-EPG permission.
Incorrect Answers
A:This does not explain the actual ACI contract permit rules defect after the shortcut. The meaningful failure is that missing or wrongly directed contract relationships block otherwise routable application flows.
B:This does not explain the actual ACI contract permit rules defect after the shortcut. The relevant evidence is aPIC contract subjects, TCP filter entries, provider and consumer relationships and contract hit or flow evidence.
C:This does not explain the actual ACI contract permit rules defect after the shortcut. In the given case, two ACI EPGs are attached correctly but traffic between them is blocked because no contract permits the required service.
Question 1045
Two ACI EPGs are attached correctly but traffic between them is blocked because no contract permits the required service. The observed failure is: missing or wrongly directed contract relationships block otherwise routable application flows. What is the BEST controlled recovery once this failure is recognized?
- Create or repair the narrow contract and verify only approved service paths work.
- Assume an IP route automatically permits all inter-EPG sessions.
- Assign new server WWPNs to bypass ACI contracts.
- Disable tenant isolation by putting all servers into one shared EPG.
Explanation
Correct Answer
A:Validate against aPIC contract subjects, TCP filter entries, provider and consumer relationships and contract hit or flow evidence. This addresses the observable fault while preserving a check of the expected result.
Incorrect Answers
B:Assume an IP route automatically permits all inter-EPG sessions. This would not reliably restore service after the stated fault. Missing or wrongly directed contract relationships block otherwise routable application flows. The controlled recovery is to create or repair the narrow contract and verify only approved service paths work.
C:Assign new server WWPNs to bypass ACI contracts. This would not reliably restore service after the stated fault. Missing or wrongly directed contract relationships block otherwise routable application flows. The controlled recovery is to create or repair the narrow contract and verify only approved service paths work.
D:Disable tenant isolation by putting all servers into one shared EPG. This would not reliably restore service after the stated fault. Missing or wrongly directed contract relationships block otherwise routable application flows. The controlled recovery is to create or repair the narrow contract and verify only approved service paths work.
Question 1046
A new three-tier app has separate EPGs yet a TCP application connection fails after a policy change removes its consumer relationship. Which configuration decision MOST directly resolves the issue?
- On this affected device, the engineer should assume an IP route automatically permits all inter-EPG sessions.
- On this affected device, the engineer should attach the specific ACI contract and filter to the correct provider and consumer EPGs.
- On this affected device, the engineer should assign new server WWPNs to bypass ACI contracts.
- On this affected device, the engineer should disable tenant isolation by putting all servers into one shared EPG.
Explanation
Correct Answer
B:This directly addresses ACI contract permit rules because ACI contracts express permitted traffic between EPGs; physical reachability does not imply inter-EPG permission.
Incorrect Answers
A:Assume an IP route automatically permits all inter-EPG sessions. The proposed change targets the wrong mechanism or lacks essential validation. ACI contracts express permitted traffic between EPGs; physical reachability does not imply inter-EPG permission. Relevant evidence is aPIC contract subjects, TCP filter entries, provider and consumer relationships and contract hit or flow evidence.
C:Assign new server WWPNs to bypass ACI contracts. This would leave the diagnosed requirement unresolved. Missing or wrongly directed contract relationships block otherwise routable application flows. The appropriate action remains to attach the specific ACI contract and filter to the correct provider and consumer EPGs.
D:Disable tenant isolation by putting all servers into one shared EPG. This is not a valid substitute for the specified fix. Missing or wrongly directed contract relationships block otherwise routable application flows. The relevant correction is to attach the specific ACI contract and filter to the correct provider and consumer EPGs.
Question 1047
A new three-tier app has separate EPGs yet a TCP application connection fails after a policy change removes its consumer relationship. What should the engineer inspect to confirm the actual state?
- For this deployment, examine one successful management ping without validating the applicable policy.
- For this deployment, examine a green link LED without confirming authentication, inspection or encryption state.
- For this deployment, examine aPIC contract subjects, TCP filter entries, provider and consumer relationships and contract hit or flow evidence.
- For this deployment, examine a user account name without the effective role or security enforcement record.
Explanation
Correct Answer
C:These observations test the actual ACI contract permit rules mechanism rather than a superficial management status. They should be checked after attach the specific ACI contract and filter to the correct provider and consumer EPGs.
Incorrect Answers
A:This information cannot independently verify ACI contract permit rules. One successful management ping without validating the applicable policy.
B:This information cannot independently verify ACI contract permit rules. A green link LED without confirming authentication, inspection or encryption state.
D:This information cannot independently verify ACI contract permit rules. A user account name without the effective role or security enforcement record.
Question 1048
A new three-tier app has separate EPGs yet a TCP application connection fails after a policy change removes its consumer relationship. What technical behavior underlies the correct decision?
- For this condition, the applicable principle is that one security mechanism always replaces all other layer-specific access controls.
- For this condition, the applicable principle is that successful login automatically grants every management privilege.
- For this condition, the applicable principle is that physical connectivity makes all ACI contract and security policies optional.
- For this condition, the applicable principle is that ACI contracts express permitted traffic between EPGs; physical reachability does not imply inter-EPG permission.
Explanation
Correct Answer
D:Validation depends on aPIC contract subjects, TCP filter entries, provider and consumer relationships and contract hit or flow evidence.
Incorrect Answers
A:One security mechanism always replaces all other layer-specific access controls. This is an incorrect generalization for ACI contract permit rules. The applicable technical behavior is that ACI contracts express permitted traffic between EPGs; physical reachability does not imply inter-EPG permission. The operator should verify aPIC contract subjects, TCP filter entries, provider and consumer relationships and contract hit or flow evidence.
B:Successful login automatically grants every management privilege. This is an incorrect generalization for ACI contract permit rules. The applicable technical behavior is that ACI contracts express permitted traffic between EPGs; physical reachability does not imply inter-EPG permission. The operator should verify aPIC contract subjects, TCP filter entries, provider and consumer relationships and contract hit or flow evidence.
C:Physical connectivity makes all ACI contract and security policies optional. This is an incorrect generalization for ACI contract permit rules. The applicable technical behavior is that ACI contracts express permitted traffic between EPGs; physical reachability does not imply inter-EPG permission. The operator should verify aPIC contract subjects, TCP filter entries, provider and consumer relationships and contract hit or flow evidence.
Question 1049
A new three-tier app has separate EPGs yet a TCP application connection fails after a policy change removes its consumer relationship. Assume an engineer instead chooses to disable tenant isolation by putting all servers into one shared EPG. Which resulting risk or fault should the reviewer identify?
- The resulting defect is that missing or wrongly directed contract relationships block otherwise routable application flows.
- The resulting defect is that auditing administrative actions is the cause of the initial unauthorized access.
- The resulting defect is that keeping valid key rotation records automatically disables the correct peer trust.
- The resulting defect is that a correctly scoped role assignment is the source of the earlier over-privilege.
Explanation
Correct Answer
A:The proper corrective action is to attach the specific ACI contract and filter to the correct provider and consumer EPGs. That is the direct consequence of choosing the misleading shortcut.
Incorrect Answers
B:This does not explain the actual ACI contract permit rules defect after the shortcut. In the given case, a new three-tier app has separate EPGs yet a TCP application connection fails after a policy change removes its consumer relationship.
C:This does not explain the actual ACI contract permit rules defect after the shortcut. Keeping valid key rotation records automatically disables the correct peer trust.
D:This does not explain the actual ACI contract permit rules defect after the shortcut. A correctly scoped role assignment is the source of the earlier over-privilege.
Question 1050
A new three-tier app has separate EPGs yet a TCP application connection fails after a policy change removes its consumer relationship. The observed failure is: missing or wrongly directed contract relationships block otherwise routable application flows. Which remediation most directly restores the intended behavior?
- The controlled remediation is to assign new server WWPNs to bypass ACI contracts.
- The controlled remediation is to create or repair the narrow contract and verify only approved service paths work.
- The controlled remediation is to disable tenant isolation by putting all servers into one shared EPG.
- The controlled remediation is to assume an IP route automatically permits all inter-EPG sessions.
Explanation
Correct Answer
B:Validate against aPIC contract subjects, TCP filter entries, provider and consumer relationships and contract hit or flow evidence. ACI contracts express permitted traffic between EPGs; physical reachability does not imply inter-EPG permission.
Incorrect Answers
A:Assign new server WWPNs to bypass ACI contracts. This would not reliably restore service after the stated fault. Missing or wrongly directed contract relationships block otherwise routable application flows. The controlled recovery is to create or repair the narrow contract and verify only approved service paths work.
C:Disable tenant isolation by putting all servers into one shared EPG. This would not reliably restore service after the stated fault. Missing or wrongly directed contract relationships block otherwise routable application flows. The controlled recovery is to create or repair the narrow contract and verify only approved service paths work.
D:Assume an IP route automatically permits all inter-EPG sessions. This would not reliably restore service after the stated fault. Missing or wrongly directed contract relationships block otherwise routable application flows. The controlled recovery is to create or repair the narrow contract and verify only approved service paths work.