cert
cert-1
cert-2

Pass Cisco 350-601 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers to Pass the Actual Exam!
30 Days Free Updates, Instant Download!

cert-5
cert-6
350-601 Exam - Verified By Experts
350-601 Premium Bundle
$29.98

350-601 Premium Bundle

$79.99
$109.97
  • Premium File 613 Questions & Answers. Last update: Nov 10, 2026
  • Training Course 143 Video Lectures
  • Study Guide 1923 Pages
 
$109.97
$79.99
accept 46 downloads in last 7 days
block-screenshots
Purchase Cisco 350-601 Exam Training Products Individually
Cisco 350-601 Premium File
Premium File 613 Q&A
$76.99$69.99
Cisco 350-601 Video Training Course
Training Course 143 Lectures
$21.99 $19.99
Cisco 350-601 PDF Study Guide
Study Guide 1923 Pages
$21.99 $19.99
Cisco 350-601 Practice Test 1

Question 1

Two Nexus leaf switches share an Ethernet segment, but OSPF neighbors never form after the teams assigned different areas. What is the BEST supported implementation or corrective action?

  1. Align OSPF area assignments on the adjoining interfaces and recheck adjacency formation.
  2. Set a static default route and ignore the failed adjacency.
  3. Disable authentication on every routing interface to force convergence.
  4. Move the affected interfaces into unrelated VRFs without a design change.

Explanation

Correct Answer

A:

This directly addresses OSPF area mismatch because OSPF neighbors on a common link must agree on area and required adjacency parameters before exchanging a full link-state database. Confirm the change against interface OSPF area settings, neighbor state, hello fields, and resulting link-state database synchronization.

Incorrect Answers

B:

Adding an unrelated static route does not repair the OSPF area mismatch, leaving the expected adjacency and learned routes absent. The relevant correction is to align OSPF area assignments on the adjoining interfaces and recheck adjacency formation.

C:

That option would disable authentication on every routing interface to force convergence, but it addresses a different concern. This directly addresses OSPF area mismatch because OSPF neighbors on a common link must agree on area and required adjacency parameters before exchanging a full link-state database.

D:

Adding an unrelated static route does not repair the OSPF area mismatch, leaving the expected adjacency and learned routes absent. The appropriate action remains to align OSPF area assignments on the adjoining interfaces and recheck adjacency formation.

Question 2

Two Nexus leaf switches share an Ethernet segment, but OSPF neighbors never form after the teams assigned different areas. Which evidence BEST verifies the intended technical behavior?

  1. A pre-change network diagram with no live control-plane state.
  2. Interface OSPF area settings, neighbor state, hello fields, and resulting link-state database synchronization.
  3. A healthy optical light without checking protocol neighbors or forwarding entries.
  4. An up management interface without the relevant routing or forwarding table.

Explanation

Correct Answer

B:

These observations test the actual OSPF area mismatch mechanism rather than a superficial management status. OSPF neighbors on a common link must agree on area and required adjacency parameters before exchanging a full link-state database.

Incorrect Answers

A:

A pre-change network diagram with no live control-plane state. This information cannot independently verify OSPF area mismatch. The decisive records instead include interface OSPF area settings, neighbor state, hello fields, and resulting link-state database synchronization. OSPF neighbors on a common link must agree on area and required adjacency parameters before exchanging a full link-state database.

C:

A healthy optical light without checking protocol neighbors or forwarding entries. This information cannot independently verify OSPF area mismatch. The decisive records instead include interface OSPF area settings, neighbor state, hello fields, and resulting link-state database synchronization. OSPF neighbors on a common link must agree on area and required adjacency parameters before exchanging a full link-state database.

D:

An up management interface without the relevant routing or forwarding table. This information cannot independently verify OSPF area mismatch. The decisive records instead include interface OSPF area settings, neighbor state, hello fields, and resulting link-state database synchronization. OSPF neighbors on a common link must agree on area and required adjacency parameters before exchanging a full link-state database.

Question 3

Two Nexus leaf switches share an Ethernet segment, but OSPF neighbors never form after the teams assigned different areas. Which principle BEST explains why the recommended solution is appropriate?

  1. All control-plane protocols exchange state automatically after a cable is inserted.
  2. Physical link carrier guarantees all overlay and routing states are correct.
  3. OSPF neighbors on a common link must agree on area and required adjacency parameters before exchanging a full link-state database.
  4. A working management-plane ping proves every tenant and application path is healthy.

Explanation

Correct Answer

C:

Validation depends on interface OSPF area settings, neighbor state, hello fields, and resulting link-state database synchronization. This explains why the most appropriate response is to align OSPF area assignments on the adjoining interfaces and recheck adjacency formation.

Incorrect Answers

A:

All control-plane protocols exchange state automatically after a cable is inserted. This is an incorrect generalization for OSPF area mismatch. The applicable technical behavior is that OSPF neighbors on a common link must agree on area and required adjacency parameters before exchanging a full link-state database. The operator should verify interface OSPF area settings, neighbor state, hello fields, and resulting link-state database synchronization.

B:

Physical link carrier guarantees all overlay and routing states are correct. This is an incorrect generalization for OSPF area mismatch. The applicable technical behavior is that OSPF neighbors on a common link must agree on area and required adjacency parameters before exchanging a full link-state database. The operator should verify interface OSPF area settings, neighbor state, hello fields, and resulting link-state database synchronization.

D:

A working management-plane ping proves every tenant and application path is healthy. This is an incorrect generalization for OSPF area mismatch. The applicable technical behavior is that OSPF neighbors on a common link must agree on area and required adjacency parameters before exchanging a full link-state database. The operator should verify interface OSPF area settings, neighbor state, hello fields, and resulting link-state database synchronization.

Question 4

Two Nexus leaf switches share an Ethernet segment, but OSPF neighbors never form after the teams assigned different areas. Assume an engineer instead chooses to set a static default route and ignore the failed adjacency. What is the MOST significant failure introduced by that shortcut?

  1. Preserving neighbor-state evidence is itself the source of the observed outage.
  2. Investigating the forwarding table is the reason a broken route cannot converge.
  3. The only consequence of the wrong change is a different device description.
  4. Adding an unrelated static route does not repair the OSPF area mismatch, leaving the expected adjacency and learned routes absent.

Explanation

Correct Answer

D:

OSPF neighbors on a common link must agree on area and required adjacency parameters before exchanging a full link-state database. That is the direct consequence of choosing the misleading shortcut.

Incorrect Answers

A:

This does not explain the actual OSPF area mismatch defect after the shortcut. The meaningful failure is that adding an unrelated static route does not repair the OSPF area mismatch, leaving the expected adjacency and learned routes absent.

B:

This does not explain the actual OSPF area mismatch defect after the shortcut. The relevant evidence is interface OSPF area settings, neighbor state, hello fields, and resulting link-state database synchronization.

C:

This does not explain the actual OSPF area mismatch defect after the shortcut. The only consequence of the wrong change is a different device description.

Question 5

Two Nexus leaf switches share an Ethernet segment, but OSPF neighbors never form after the teams assigned different areas. The observed failure is: adding an unrelated static route does not repair the OSPF area mismatch, leaving the expected adjacency and learned routes absent. What is the BEST controlled recovery once this failure is recognized?

  1. Correct the area inconsistency, clear only the affected adjacency if required, and verify full neighbor state.
  2. Disable authentication on every routing interface to force convergence.
  3. Move the affected interfaces into unrelated VRFs without a design change.
  4. Set a static default route and ignore the failed adjacency.

Explanation

Correct Answer

A:

OSPF neighbors on a common link must agree on area and required adjacency parameters before exchanging a full link-state database. This addresses the observable fault while preserving a check of the expected result.

Incorrect Answers

B:

That option would disable authentication on every routing interface to force convergence, but it addresses a different concern. This addresses the observable fault while preserving a check of the expected result.

C:

Move the affected interfaces into unrelated VRFs without a design change. This would not reliably restore service after the stated fault. Adding an unrelated static route does not repair the OSPF area mismatch, leaving the expected adjacency and learned routes absent. The controlled recovery is to correct the area inconsistency, clear only the affected adjacency if required, and verify full neighbor state.

D:

That option would set a static default route and ignore the failed adjacency, but it addresses a different concern. This addresses the observable fault while preserving a check of the expected result.

Question 6

A newly added routed transit link shows bidirectional hellos, but the OSPF peers cannot become fully adjacent because their interface area identifiers differ. Which configuration decision MOST directly resolves the issue?

  1. On this affected device, the engineer should disable authentication on every routing interface to force convergence.
  2. On this affected device, the engineer should align OSPF area assignments on the adjoining interfaces and recheck adjacency formation.
  3. On this affected device, the engineer should move the affected interfaces into unrelated VRFs without a design change.
  4. On this affected device, the engineer should set a static default route and ignore the failed adjacency.

Explanation

Correct Answer

B:

This directly addresses OSPF area mismatch because OSPF neighbors on a common link must agree on area and required adjacency parameters before exchanging a full link-state database.

Incorrect Answers

A:

Disable authentication on every routing interface to force convergence. The proposed change targets the wrong mechanism or lacks essential validation. OSPF neighbors on a common link must agree on area and required adjacency parameters before exchanging a full link-state database. Relevant evidence is interface OSPF area settings, neighbor state, hello fields, and resulting link-state database synchronization.

C:

Adding an unrelated static route does not repair the OSPF area mismatch, leaving the expected adjacency and learned routes absent. Move the affected interfaces into unrelated VRFs without a design change.

D:

Adding an unrelated static route does not repair the OSPF area mismatch, leaving the expected adjacency and learned routes absent.

Question 7

A newly added routed transit link shows bidirectional hellos, but the OSPF peers cannot become fully adjacent because their interface area identifiers differ. What should the engineer inspect to confirm the actual state?

  1. For this deployment, examine one successful ping to an unrelated management address.
  2. For this deployment, examine a pre-change network diagram with no live control-plane state.
  3. For this deployment, examine interface OSPF area settings, neighbor state, hello fields, and resulting link-state database synchronization.
  4. For this deployment, examine a healthy optical light without checking protocol neighbors or forwarding entries.

Explanation

Correct Answer

C:

These observations test the actual OSPF area mismatch mechanism rather than a superficial management status. They should be checked after align OSPF area assignments on the adjoining interfaces and recheck adjacency formation.

Incorrect Answers

A:

One successful ping to an unrelated management address. This information cannot independently verify OSPF area mismatch. The decisive records instead include interface OSPF area settings, neighbor state, hello fields, and resulting link-state database synchronization. OSPF neighbors on a common link must agree on area and required adjacency parameters before exchanging a full link-state database.

B:

A pre-change network diagram with no live control-plane state. This information cannot independently verify OSPF area mismatch. The decisive records instead include interface OSPF area settings, neighbor state, hello fields, and resulting link-state database synchronization. OSPF neighbors on a common link must agree on area and required adjacency parameters before exchanging a full link-state database.

D:

A healthy optical light without checking protocol neighbors or forwarding entries. This information cannot independently verify OSPF area mismatch. The decisive records instead include interface OSPF area settings, neighbor state, hello fields, and resulting link-state database synchronization. OSPF neighbors on a common link must agree on area and required adjacency parameters before exchanging a full link-state database.

Question 8

A newly added routed transit link shows bidirectional hellos, but the OSPF peers cannot become fully adjacent because their interface area identifiers differ. What technical behavior underlies the correct decision?

  1. For this condition, the applicable principle is that a working management-plane ping proves every tenant and application path is healthy.
  2. For this condition, the applicable principle is that all control-plane protocols exchange state automatically after a cable is inserted.
  3. For this condition, the applicable principle is that configuration differences between peer switches cannot affect network traffic.
  4. For this condition, the applicable principle is that OSPF neighbors on a common link must agree on area and required adjacency parameters before exchanging a full link-state database.

Explanation

Correct Answer

D:

Validation depends on interface OSPF area settings, neighbor state, hello fields, and resulting link-state database synchronization.

Incorrect Answers

A:

A working management-plane ping proves every tenant and application path is healthy. This is an incorrect generalization for OSPF area mismatch. The applicable technical behavior is that OSPF neighbors on a common link must agree on area and required adjacency parameters before exchanging a full link-state database. The operator should verify interface OSPF area settings, neighbor state, hello fields, and resulting link-state database synchronization.

B:

All control-plane protocols exchange state automatically after a cable is inserted. This is an incorrect generalization for OSPF area mismatch. The applicable technical behavior is that OSPF neighbors on a common link must agree on area and required adjacency parameters before exchanging a full link-state database. The operator should verify interface OSPF area settings, neighbor state, hello fields, and resulting link-state database synchronization.

C:

Configuration differences between peer switches cannot affect network traffic. This is an incorrect generalization for OSPF area mismatch. The applicable technical behavior is that OSPF neighbors on a common link must agree on area and required adjacency parameters before exchanging a full link-state database. The operator should verify interface OSPF area settings, neighbor state, hello fields, and resulting link-state database synchronization.

Question 9

A newly added routed transit link shows bidirectional hellos, but the OSPF peers cannot become fully adjacent because their interface area identifiers differ. Assume an engineer instead chooses to set a static default route and ignore the failed adjacency. Which resulting risk or fault should the reviewer identify?

  1. The resulting defect is that adding an unrelated static route does not repair the OSPF area mismatch, leaving the expected adjacency and learned routes absent.
  2. The resulting defect is that the only consequence of the wrong change is a different device description.
  3. The resulting defect is that verifying topology after maintenance automatically creates a switching loop.
  4. The resulting defect is that investigating the forwarding table is the reason a broken route cannot converge.

Explanation

Correct Answer

A:

OSPF neighbors on a common link must agree on area and required adjacency parameters before exchanging a full link-state database. The proper corrective action is to align OSPF area assignments on the adjoining interfaces and recheck adjacency formation.

Incorrect Answers

B:

The only consequence of the wrong change is a different device description. This does not explain the actual OSPF area mismatch defect after the shortcut. The meaningful failure is that adding an unrelated static route does not repair the OSPF area mismatch, leaving the expected adjacency and learned routes absent. The relevant evidence is interface OSPF area settings, neighbor state, hello fields, and resulting link-state database synchronization.

C:

Verifying topology after maintenance automatically creates a switching loop. This does not explain the actual OSPF area mismatch defect after the shortcut. The meaningful failure is that adding an unrelated static route does not repair the OSPF area mismatch, leaving the expected adjacency and learned routes absent. The relevant evidence is interface OSPF area settings, neighbor state, hello fields, and resulting link-state database synchronization.

D:

Investigating the forwarding table is the reason a broken route cannot converge. This does not explain the actual OSPF area mismatch defect after the shortcut. The meaningful failure is that adding an unrelated static route does not repair the OSPF area mismatch, leaving the expected adjacency and learned routes absent. The relevant evidence is interface OSPF area settings, neighbor state, hello fields, and resulting link-state database synchronization.

Question 10

A newly added routed transit link shows bidirectional hellos, but the OSPF peers cannot become fully adjacent because their interface area identifiers differ. The observed failure is: adding an unrelated static route does not repair the OSPF area mismatch, leaving the expected adjacency and learned routes absent. Which remediation most directly restores the intended behavior?

  1. The controlled remediation is to move the affected interfaces into unrelated VRFs without a design change.
  2. The controlled remediation is to correct the area inconsistency, clear only the affected adjacency if required, and verify full neighbor state.
  3. The controlled remediation is to set a static default route and ignore the failed adjacency.
  4. The controlled remediation is to disable authentication on every routing interface to force convergence.

Explanation

Correct Answer

B:

OSPF neighbors on a common link must agree on area and required adjacency parameters before exchanging a full link-state database. Validate against interface OSPF area settings, neighbor state, hello fields, and resulting link-state database synchronization.

Incorrect Answers

A:

Move the affected interfaces into unrelated VRFs without a design change. This would not reliably restore service after the stated fault. Adding an unrelated static route does not repair the OSPF area mismatch, leaving the expected adjacency and learned routes absent. The controlled recovery is to correct the area inconsistency, clear only the affected adjacency if required, and verify full neighbor state.

C:

Set a static default route and ignore the failed adjacency. This would not reliably restore service after the stated fault. Adding an unrelated static route does not repair the OSPF area mismatch, leaving the expected adjacency and learned routes absent. The controlled recovery is to correct the area inconsistency, clear only the affected adjacency if required, and verify full neighbor state.

D:

Disable authentication on every routing interface to force convergence. This would not reliably restore service after the stated fault. Adding an unrelated static route does not repair the OSPF area mismatch, leaving the expected adjacency and learned routes absent. The controlled recovery is to correct the area inconsistency, clear only the affected adjacency if required, and verify full neighbor state.

Implementing and Operating Cisco Data Center Core Technologies (DCCOR) (350-601) Practice Tests