cert
cert-1
cert-2

Pass Cisco 300-610 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers to Pass the Actual Exam!
30 Days Free Updates, Instant Download!

cert-5
cert-6
300-610 Exam - Verified By Experts
300-610 Premium File

300-610 Premium File

$69.99
$76.99
  • Premium File 350 Questions & Answers. Last Update: Nov 13, 2026

Whats Included:

  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
 
$76.99
$69.99
accept 10 downloads in the last 7 days
block-screenshots
Cisco 300-610 Practice Test 44

Question 430

At a storage-replication data center, the architecture standards group considers the recurring risk: A host logs into one storage target portal and assumes all target interfaces will automatically be discovered for MPIO. The team needs a defensible design decision rather than a vendor feature checklist. Which continuing design control best prevents the same problem from recurring?

  1. Monitor congestion and update class mappings when new backup applications are added.
  2. Retest path diversity after host NIC, switch or array changes.
  3. Include transport MTU and encapsulation budget in storage acceptance tests.
  4. Maintain target portal inventory and discovery change checks.

Explanation

Correct Answer

D:

The most relevant ongoing safeguard is: Maintain target portal inventory and discovery change checks. The risk it addresses is: A host logs into one storage target portal and assumes all target interfaces will automatically be discovered for MPIO. This check is tied to the technical principle: iSCSI target discovery and session login specify available target portals; MPIO requires the initiator to establish supported sessions to eligible distinct paths. The immediate correction remains: Configure the approved discovery portals and validate target identities and supported multipath sessions. Periodically validate the safeguard through two different observations. List discovered IQNs and portal IP addresses Inspect actual logged-in sessions and physical egress per target path. The continuing acceptance target is: The initiator sees all intended eligible storage paths without duplicate or unauthorized target logins.

Incorrect Answers

A:

This is a continuing control for iscsi congestion isolation from backup; its underlying principle is: iSCSI uses IP transport and benefits from bandwidth, loss, queueing and failure-domain design separate from ordinary bulk traffic. The recurring risk here is different: A host logs into one storage target portal and assumes all target interfaces will automatically be discovered for MPIO. The appropriate ongoing control must prevent recurrence of that particular failure, not just the separate issue of: An iSCSI network shares a congested access queue with bulk VM backups and storage write latency spikes under backup load. The intended long-term acceptance condition remains: The initiator sees all intended eligible storage paths without duplicate or unauthorized target logins.

B:

This is a continuing control for iscsi independent fabric multipathing; its underlying principle is: Multipathing only protects against independent faults when initiator ports, transport paths and target access domains are genuinely diverse. The recurring risk here is different: A host logs into one storage target portal and assumes all target interfaces will automatically be discovered for MPIO. The appropriate ongoing control must prevent recurrence of that particular failure, not just the separate issue of: A virtualization host discovers two iSCSI targets but both sessions traverse one physical NIC and access switch. The intended long-term acceptance condition remains: The initiator sees all intended eligible storage paths without duplicate or unauthorized target logins.

C:

This is a continuing control for iscsi jumbo mtu end-to-end; its underlying principle is: Ethernet MTU must be compatible end to end; enabling jumbo frames at endpoints does not change each transit interface or overlay overhead. The recurring risk here is different: A host logs into one storage target portal and assumes all target interfaces will automatically be discovered for MPIO. The appropriate ongoing control must prevent recurrence of that particular failure, not just the separate issue of: A storage operator enables 9000-byte MTU at the host and array but large iSCSI transfers fail on the intermediate switching path. The intended long-term acceptance condition remains: The initiator sees all intended eligible storage paths without duplicate or unauthorized target logins.

Question 431

At a storage-replication data center, a proposed deployment has this failure mode: A storage operator enables 9000-byte MTU at the host and array but large iSCSI transfers fail on the intermediate switching path. The maintenance plan must not disrupt unrelated tenants. Which design correction most directly addresses this specific failure or requirement?

  1. Align a supported storage path MTU across NIC, switch, fabric and target before accepting jumbo-frame requirements.
  2. Map storage vmkernel or initiator IPs and target subnets to distinct approved path routes and bindings.
  3. Correct authorized CHAP identity and shared secret values with appropriate secret-handling and rotation procedures.
  4. Configure the approved discovery portals and validate target identities and supported multipath sessions.

Explanation

Correct Answer

A:

The relevant failure is: A storage operator enables 9000-byte MTU at the host and array but large iSCSI transfers fail on the intermediate switching path. The technical distinction is: Ethernet MTU must be compatible end to end; enabling jumbo frames at endpoints does not change each transit interface or overlay overhead. The targeted correction is: Align a supported storage path MTU across NIC, switch, fabric and target before accepting jumbo-frame requirements. Before changing the design, check two independent observations. Compare configured and operational MTUs at each hop Run a permitted large-frame path test and correlate oversize/drop counters. Accept the change only if: Required iSCSI payload sizes traverse the fabric without size-specific blackholes.

Incorrect Answers

B:

This action targets iscsi multi-subnet addressing and mpio, where the mechanism is: Intended multipathing depends on source interface and target portal routing; different logical VLAN labels alone do not guarantee independent transport paths. That is a separate condition from the problem in this question: A storage operator enables 9000-byte MTU at the host and array but large iSCSI transfers fail on the intermediate switching path. Even a successful repair of the alternative would not establish the required result: Required iSCSI payload sizes traverse the fabric without size-specific blackholes. The applicable design change must address the diagnosed mechanism of the stated case, not the neighboring design problem.

C:

This action targets iscsi chap credential design, where the mechanism is: CHAP can authenticate iSCSI initiators or targets when configured consistently; bypassing it undermines storage access controls. That is a separate condition from the problem in this question: A storage operator enables 9000-byte MTU at the host and array but large iSCSI transfers fail on the intermediate switching path. Even a successful repair of the alternative would not establish the required result: Required iSCSI payload sizes traverse the fabric without size-specific blackholes. The applicable design change must address the diagnosed mechanism of the stated case, not the neighboring design problem.

D:

This action targets iscsi target portal discovery, where the mechanism is: iSCSI target discovery and session login specify available target portals; MPIO requires the initiator to establish supported sessions to eligible distinct paths. That is a separate condition from the problem in this question: A storage operator enables 9000-byte MTU at the host and array but large iSCSI transfers fail on the intermediate switching path. Even a successful repair of the alternative would not establish the required result: Required iSCSI payload sizes traverse the fabric without size-specific blackholes. The applicable design change must address the diagnosed mechanism of the stated case, not the neighboring design problem.

Question 432

At a dual-fabric enterprise SAN, the cause remains unconfirmed for this reported issue: A storage operator enables 9000-byte MTU at the host and array but large iSCSI transfers fail on the intermediate switching path. Acceptance requires evidence from the running system, not just the saved design. Which pair of observations most directly tests the proposed diagnosis before a change?

  1. Inspect each initiator source IP and route to its target portal; trace physical NIC utilization for simultaneous sessions.
  2. Inspect array path access state for each target; test failover and steady-state I/O throughput with the recommended path selection.
  3. Inspect negotiation and authentication failure logs without exposing secrets; validate login from the authorized initiator and rejection of an unauthorized test identity.
  4. Compare configured and operational MTUs at each hop; run a permitted large-frame path test and correlate oversize/drop counters.

Explanation

Correct Answer

D:

The first observation is: Compare configured and operational MTUs at each hop The independent second observation is: Run a permitted large-frame path test and correlate oversize/drop counters. Together they test the proposed diagnosis of this incident: A storage operator enables 9000-byte MTU at the host and array but large iSCSI transfers fail on the intermediate switching path. The underlying technical principle is: Ethernet MTU must be compatible end to end; enabling jumbo frames at endpoints does not change each transit interface or overlay overhead. If those checks confirm it, the appropriate next action is: Align a supported storage path MTU across NIC, switch, fabric and target before accepting jumbo-frame requirements. The expected measurable result is: Required iSCSI payload sizes traverse the fabric without size-specific blackholes.

Incorrect Answers

A:

These observations investigate iscsi multi-subnet addressing and mpio; they would be useful if the symptoms were: Two storage paths are configured on separate VLANs but the host's routing table sends both sessions through the same default gateway. That alternative rests on the principle: Intended multipathing depends on source interface and target portal routing; different logical VLAN labels alone do not guarantee independent transport paths. The question instead asks for evidence about: A storage operator enables 9000-byte MTU at the host and array but large iSCSI transfers fail on the intermediate switching path. The discriminating observations here are: Compare configured and operational MTUs at each hop Run a permitted large-frame path test and correlate oversize/drop counters.

B:

These observations investigate iscsi path policy active-active versus standby; they would be useful if the symptoms were: A storage host uses a round-robin multipath policy against an array that supports only particular active target paths and sees path thrashing. That alternative rests on the principle: MPIO load balancing and target asymmetric access states must match array ALUA or other vendor-specific path recommendations. The question instead asks for evidence about: A storage operator enables 9000-byte MTU at the host and array but large iSCSI transfers fail on the intermediate switching path. The discriminating observations here are: Compare configured and operational MTUs at each hop Run a permitted large-frame path test and correlate oversize/drop counters.

C:

These observations investigate iscsi chap credential design; they would be useful if the symptoms were: An iSCSI initiator attempts to log in with stale CHAP credentials and the support team proposes disabling authentication on the target. That alternative rests on the principle: CHAP can authenticate iSCSI initiators or targets when configured consistently; bypassing it undermines storage access controls. The question instead asks for evidence about: A storage operator enables 9000-byte MTU at the host and array but large iSCSI transfers fail on the intermediate switching path. The discriminating observations here are: Compare configured and operational MTUs at each hop Run a permitted large-frame path test and correlate oversize/drop counters.

Question 433

At a converged FCoE storage network, a failure review must identify the central technical cause of: A storage operator enables 9000-byte MTU at the host and array but large iSCSI transfers fail on the intermediate switching path. One component outage must remain inside the agreed availability budget. Which engineering principle best explains the observed behavior?

  1. Ethernet MTU must be compatible end to end; enabling jumbo frames at endpoints does not change each transit interface or overlay overhead.
  2. CHAP can authenticate iSCSI initiators or targets when configured consistently; bypassing it undermines storage access controls.
  3. iSCSI target discovery and session login specify available target portals; MPIO requires the initiator to establish supported sessions to eligible distinct paths.
  4. Intended multipathing depends on source interface and target portal routing; different logical VLAN labels alone do not guarantee independent transport paths.

Explanation

Correct Answer

A:

The controlling technical principle is: Ethernet MTU must be compatible end to end; enabling jumbo frames at endpoints does not change each transit interface or overlay overhead. This matters because the reported design failure is: A storage operator enables 9000-byte MTU at the host and array but large iSCSI transfers fail on the intermediate switching path. The first diagnostic check is: Compare configured and operational MTUs at each hop The independent check is: Run a permitted large-frame path test and correlate oversize/drop counters. These facts support the targeted intervention: Align a supported storage path MTU across NIC, switch, fabric and target before accepting jumbo-frame requirements. Confirm that the resulting design meets this condition: Required iSCSI payload sizes traverse the fabric without size-specific blackholes.

Incorrect Answers

B:

The offered principle describes iscsi chap credential design: CHAP can authenticate iSCSI initiators or targets when configured consistently; bypassing it undermines storage access controls. That is useful for a distinct incident, such as: An iSCSI initiator attempts to log in with stale CHAP credentials and the support team proposes disabling authentication on the target. It does not account for the reported failure: A storage operator enables 9000-byte MTU at the host and array but large iSCSI transfers fail on the intermediate switching path. The governing principle in this situation is: Ethernet MTU must be compatible end to end; enabling jumbo frames at endpoints does not change each transit interface or overlay overhead.

C:

The offered principle describes iscsi target portal discovery: iSCSI target discovery and session login specify available target portals; MPIO requires the initiator to establish supported sessions to eligible distinct paths. That is useful for a distinct incident, such as: A host logs into one storage target portal and assumes all target interfaces will automatically be discovered for MPIO. It does not account for the reported failure: A storage operator enables 9000-byte MTU at the host and array but large iSCSI transfers fail on the intermediate switching path. The governing principle in this situation is: Ethernet MTU must be compatible end to end; enabling jumbo frames at endpoints does not change each transit interface or overlay overhead.

D:

The offered principle describes iscsi multi-subnet addressing and mpio: Intended multipathing depends on source interface and target portal routing; different logical VLAN labels alone do not guarantee independent transport paths. That is useful for a distinct incident, such as: Two storage paths are configured on separate VLANs but the host's routing table sends both sessions through the same default gateway. It does not account for the reported failure: A storage operator enables 9000-byte MTU at the host and array but large iSCSI transfers fail on the intermediate switching path. The governing principle in this situation is: Ethernet MTU must be compatible end to end; enabling jumbo frames at endpoints does not change each transit interface or overlay overhead.

Question 434

At a distributed AI checkpoint storage service, the service owner needs evidence of resolution for: A storage operator enables 9000-byte MTU at the host and array but large iSCSI transfers fail on the intermediate switching path. The architect must preserve the intended failure domains. Which measured result most directly proves the original requirement is satisfied?

  1. Storage meets tail-latency targets during planned peak data movement.
  2. The initiator sees all intended eligible storage paths without duplicate or unauthorized target logins.
  3. Required iSCSI payload sizes traverse the fabric without size-specific blackholes.
  4. I/O uses eligible optimized paths and recovers predictably after a path failure.

Explanation

Correct Answer

C:

The relevant measurable success criterion is: Required iSCSI payload sizes traverse the fabric without size-specific blackholes. It addresses the original reported defect: A storage operator enables 9000-byte MTU at the host and array but large iSCSI transfers fail on the intermediate switching path. A saved design or configuration command alone does not establish that outcome. Observe the affected system in two independent ways: Compare configured and operational MTUs at each hop Run a permitted large-frame path test and correlate oversize/drop counters. The correction being evaluated is: Align a supported storage path MTU across NIC, switch, fabric and target before accepting jumbo-frame requirements. The underlying reason that correction matters is: Ethernet MTU must be compatible end to end; enabling jumbo frames at endpoints does not change each transit interface or overlay overhead.

Incorrect Answers

A:

This metric would help validate a correction to iscsi congestion isolation from backup, rather than the original reported issue. The other issue is: An iSCSI network shares a congested access queue with bulk VM backups and storage write latency spikes under backup load. Here the defect to be resolved is: A storage operator enables 9000-byte MTU at the host and array but large iSCSI transfers fail on the intermediate switching path. The expected measurable outcome for the actual incident is: Required iSCSI payload sizes traverse the fabric without size-specific blackholes. A positive result for the other service would not prove this requirement is met.

B:

This metric would help validate a correction to iscsi target portal discovery, rather than the original reported issue. The other issue is: A host logs into one storage target portal and assumes all target interfaces will automatically be discovered for MPIO. Here the defect to be resolved is: A storage operator enables 9000-byte MTU at the host and array but large iSCSI transfers fail on the intermediate switching path. The expected measurable outcome for the actual incident is: Required iSCSI payload sizes traverse the fabric without size-specific blackholes. A positive result for the other service would not prove this requirement is met.

D:

This metric would help validate a correction to iscsi path policy active-active versus standby, rather than the original reported issue. The other issue is: A storage host uses a round-robin multipath policy against an array that supports only particular active target paths and sees path thrashing. Here the defect to be resolved is: A storage operator enables 9000-byte MTU at the host and array but large iSCSI transfers fail on the intermediate switching path. The expected measurable outcome for the actual incident is: Required iSCSI payload sizes traverse the fabric without size-specific blackholes. A positive result for the other service would not prove this requirement is met.

Question 435

At a high-IOPS virtualized storage farm, after correction, the team wants to prevent recurrence of: A storage operator enables 9000-byte MTU at the host and array but large iSCSI transfers fail on the intermediate switching path. The team needs a defensible design decision rather than a vendor feature checklist. Which continuing design control best prevents the same problem from recurring?

  1. Include transport MTU and encapsulation budget in storage acceptance tests.
  2. Maintain target portal inventory and discovery change checks.
  3. Rotate secrets using secure storage and monitor denied iSCSI logins.
  4. Review source bindings whenever host uplink or storage VLAN routing changes.

Explanation

Correct Answer

A:

The most relevant ongoing safeguard is: Include transport MTU and encapsulation budget in storage acceptance tests. The risk it addresses is: A storage operator enables 9000-byte MTU at the host and array but large iSCSI transfers fail on the intermediate switching path. This check is tied to the technical principle: Ethernet MTU must be compatible end to end; enabling jumbo frames at endpoints does not change each transit interface or overlay overhead. The immediate correction remains: Align a supported storage path MTU across NIC, switch, fabric and target before accepting jumbo-frame requirements. Periodically validate the safeguard through two different observations. Compare configured and operational MTUs at each hop Run a permitted large-frame path test and correlate oversize/drop counters. The continuing acceptance target is: Required iSCSI payload sizes traverse the fabric without size-specific blackholes.

Incorrect Answers

B:

This is a continuing control for iscsi target portal discovery; its underlying principle is: iSCSI target discovery and session login specify available target portals; MPIO requires the initiator to establish supported sessions to eligible distinct paths. The recurring risk here is different: A storage operator enables 9000-byte MTU at the host and array but large iSCSI transfers fail on the intermediate switching path. The appropriate ongoing control must prevent recurrence of that particular failure, not just the separate issue of: A host logs into one storage target portal and assumes all target interfaces will automatically be discovered for MPIO. The intended long-term acceptance condition remains: Required iSCSI payload sizes traverse the fabric without size-specific blackholes.

C:

This is a continuing control for iscsi chap credential design; its underlying principle is: CHAP can authenticate iSCSI initiators or targets when configured consistently; bypassing it undermines storage access controls. The recurring risk here is different: A storage operator enables 9000-byte MTU at the host and array but large iSCSI transfers fail on the intermediate switching path. The appropriate ongoing control must prevent recurrence of that particular failure, not just the separate issue of: An iSCSI initiator attempts to log in with stale CHAP credentials and the support team proposes disabling authentication on the target. The intended long-term acceptance condition remains: Required iSCSI payload sizes traverse the fabric without size-specific blackholes.

D:

This is a continuing control for iscsi multi-subnet addressing and mpio; its underlying principle is: Intended multipathing depends on source interface and target portal routing; different logical VLAN labels alone do not guarantee independent transport paths. The recurring risk here is different: A storage operator enables 9000-byte MTU at the host and array but large iSCSI transfers fail on the intermediate switching path. The appropriate ongoing control must prevent recurrence of that particular failure, not just the separate issue of: Two storage paths are configured on separate VLANs but the host's routing table sends both sessions through the same default gateway. The intended long-term acceptance condition remains: Required iSCSI payload sizes traverse the fabric without size-specific blackholes.

Question 436

At a high-IOPS virtualized storage farm, a design review reports the following issue: An iSCSI initiator attempts to log in with stale CHAP credentials and the support team proposes disabling authentication on the target. The maintenance plan must not disrupt unrelated tenants. Which design correction most directly addresses this specific failure or requirement?

  1. Choose a supported MPIO policy consistent with target path priority and failover behavior rather than maximizing active sessions blindly.
  2. Align a supported storage path MTU across NIC, switch, fabric and target before accepting jumbo-frame requirements.
  3. Provide appropriate QoS class, bandwidth and buffer capacity for iSCSI without falsely treating it as FCoE priority traffic.
  4. Correct authorized CHAP identity and shared secret values with appropriate secret-handling and rotation procedures.

Explanation

Correct Answer

D:

The relevant failure is: An iSCSI initiator attempts to log in with stale CHAP credentials and the support team proposes disabling authentication on the target. The technical distinction is: CHAP can authenticate iSCSI initiators or targets when configured consistently; bypassing it undermines storage access controls. The targeted correction is: Correct authorized CHAP identity and shared secret values with appropriate secret-handling and rotation procedures. Before changing the design, check two independent observations. Inspect negotiation and authentication failure logs without exposing secrets Validate login from the authorized initiator and rejection of an unauthorized test identity. Accept the change only if: Only permitted initiators authenticate and gain mapped storage access.

Incorrect Answers

A:

This action targets iscsi path policy active-active versus standby, where the mechanism is: MPIO load balancing and target asymmetric access states must match array ALUA or other vendor-specific path recommendations. That is a separate condition from the problem in this question: An iSCSI initiator attempts to log in with stale CHAP credentials and the support team proposes disabling authentication on the target. Even a successful repair of the alternative would not establish the required result: Only permitted initiators authenticate and gain mapped storage access. The applicable design change must address the diagnosed mechanism of the stated case, not the neighboring design problem.

B:

This action targets iscsi jumbo mtu end-to-end, where the mechanism is: Ethernet MTU must be compatible end to end; enabling jumbo frames at endpoints does not change each transit interface or overlay overhead. That is a separate condition from the problem in this question: An iSCSI initiator attempts to log in with stale CHAP credentials and the support team proposes disabling authentication on the target. Even a successful repair of the alternative would not establish the required result: Only permitted initiators authenticate and gain mapped storage access. The applicable design change must address the diagnosed mechanism of the stated case, not the neighboring design problem.

C:

This action targets iscsi congestion isolation from backup, where the mechanism is: iSCSI uses IP transport and benefits from bandwidth, loss, queueing and failure-domain design separate from ordinary bulk traffic. That is a separate condition from the problem in this question: An iSCSI initiator attempts to log in with stale CHAP credentials and the support team proposes disabling authentication on the target. Even a successful repair of the alternative would not establish the required result: Only permitted initiators authenticate and gain mapped storage access. The applicable design change must address the diagnosed mechanism of the stated case, not the neighboring design problem.

Question 437

At a storage-replication data center, two engineers propose competing diagnoses for this condition: An iSCSI initiator attempts to log in with stale CHAP credentials and the support team proposes disabling authentication on the target. Acceptance requires evidence from the running system, not just the saved design. Which pair of observations most directly tests the proposed diagnosis before a change?

  1. Trace both sessions through NICs, VLANs and switches; disconnect one approved path and observe I/O continuity and surviving throughput.
  2. Compare configured and operational MTUs at each hop; run a permitted large-frame path test and correlate oversize/drop counters.
  3. Inspect negotiation and authentication failure logs without exposing secrets; validate login from the authorized initiator and rejection of an unauthorized test identity.
  4. Inspect array path access state for each target; test failover and steady-state I/O throughput with the recommended path selection.

Explanation

Correct Answer

C:

The first observation is: Inspect negotiation and authentication failure logs without exposing secrets The independent second observation is: Validate login from the authorized initiator and rejection of an unauthorized test identity. Together they test the proposed diagnosis of this incident: An iSCSI initiator attempts to log in with stale CHAP credentials and the support team proposes disabling authentication on the target. The underlying technical principle is: CHAP can authenticate iSCSI initiators or targets when configured consistently; bypassing it undermines storage access controls. If those checks confirm it, the appropriate next action is: Correct authorized CHAP identity and shared secret values with appropriate secret-handling and rotation procedures. The expected measurable result is: Only permitted initiators authenticate and gain mapped storage access.

Incorrect Answers

A:

These observations investigate iscsi independent fabric multipathing; they would be useful if the symptoms were: A virtualization host discovers two iSCSI targets but both sessions traverse one physical NIC and access switch. That alternative rests on the principle: Multipathing only protects against independent faults when initiator ports, transport paths and target access domains are genuinely diverse. The question instead asks for evidence about: An iSCSI initiator attempts to log in with stale CHAP credentials and the support team proposes disabling authentication on the target. The discriminating observations here are: Inspect negotiation and authentication failure logs without exposing secrets Validate login from the authorized initiator and rejection of an unauthorized test identity.

B:

These observations investigate iscsi jumbo mtu end-to-end; they would be useful if the symptoms were: A storage operator enables 9000-byte MTU at the host and array but large iSCSI transfers fail on the intermediate switching path. That alternative rests on the principle: Ethernet MTU must be compatible end to end; enabling jumbo frames at endpoints does not change each transit interface or overlay overhead. The question instead asks for evidence about: An iSCSI initiator attempts to log in with stale CHAP credentials and the support team proposes disabling authentication on the target. The discriminating observations here are: Inspect negotiation and authentication failure logs without exposing secrets Validate login from the authorized initiator and rejection of an unauthorized test identity.

D:

These observations investigate iscsi path policy active-active versus standby; they would be useful if the symptoms were: A storage host uses a round-robin multipath policy against an array that supports only particular active target paths and sees path thrashing. That alternative rests on the principle: MPIO load balancing and target asymmetric access states must match array ALUA or other vendor-specific path recommendations. The question instead asks for evidence about: An iSCSI initiator attempts to log in with stale CHAP credentials and the support team proposes disabling authentication on the target. The discriminating observations here are: Inspect negotiation and authentication failure logs without exposing secrets Validate login from the authorized initiator and rejection of an unauthorized test identity.

Question 438

At a dual-fabric enterprise SAN, the design group challenges an assumption behind this issue: An iSCSI initiator attempts to log in with stale CHAP credentials and the support team proposes disabling authentication on the target. One component outage must remain inside the agreed availability budget. Which engineering principle best explains the observed behavior?

  1. CHAP can authenticate iSCSI initiators or targets when configured consistently; bypassing it undermines storage access controls.
  2. iSCSI target discovery and session login specify available target portals; MPIO requires the initiator to establish supported sessions to eligible distinct paths.
  3. Intended multipathing depends on source interface and target portal routing; different logical VLAN labels alone do not guarantee independent transport paths.
  4. MPIO load balancing and target asymmetric access states must match array ALUA or other vendor-specific path recommendations.

Explanation

Correct Answer

A:

The controlling technical principle is: CHAP can authenticate iSCSI initiators or targets when configured consistently; bypassing it undermines storage access controls. This matters because the reported design failure is: An iSCSI initiator attempts to log in with stale CHAP credentials and the support team proposes disabling authentication on the target. The first diagnostic check is: Inspect negotiation and authentication failure logs without exposing secrets The independent check is: Validate login from the authorized initiator and rejection of an unauthorized test identity. These facts support the targeted intervention: Correct authorized CHAP identity and shared secret values with appropriate secret-handling and rotation procedures. Confirm that the resulting design meets this condition: Only permitted initiators authenticate and gain mapped storage access.

Incorrect Answers

B:

The offered principle describes iscsi target portal discovery: iSCSI target discovery and session login specify available target portals; MPIO requires the initiator to establish supported sessions to eligible distinct paths. That is useful for a distinct incident, such as: A host logs into one storage target portal and assumes all target interfaces will automatically be discovered for MPIO. It does not account for the reported failure: An iSCSI initiator attempts to log in with stale CHAP credentials and the support team proposes disabling authentication on the target. The governing principle in this situation is: CHAP can authenticate iSCSI initiators or targets when configured consistently; bypassing it undermines storage access controls.

C:

The offered principle describes iscsi multi-subnet addressing and mpio: Intended multipathing depends on source interface and target portal routing; different logical VLAN labels alone do not guarantee independent transport paths. That is useful for a distinct incident, such as: Two storage paths are configured on separate VLANs but the host's routing table sends both sessions through the same default gateway. It does not account for the reported failure: An iSCSI initiator attempts to log in with stale CHAP credentials and the support team proposes disabling authentication on the target. The governing principle in this situation is: CHAP can authenticate iSCSI initiators or targets when configured consistently; bypassing it undermines storage access controls.

D:

The offered principle describes iscsi path policy active-active versus standby: MPIO load balancing and target asymmetric access states must match array ALUA or other vendor-specific path recommendations. That is useful for a distinct incident, such as: A storage host uses a round-robin multipath policy against an array that supports only particular active target paths and sees path thrashing. It does not account for the reported failure: An iSCSI initiator attempts to log in with stale CHAP credentials and the support team proposes disabling authentication on the target. The governing principle in this situation is: CHAP can authenticate iSCSI initiators or targets when configured consistently; bypassing it undermines storage access controls.

Question 439

At a converged FCoE storage network, a change has been proposed for the following condition: An iSCSI initiator attempts to log in with stale CHAP credentials and the support team proposes disabling authentication on the target. The architect must preserve the intended failure domains. Which measured result most directly proves the original requirement is satisfied?

  1. The initiator sees all intended eligible storage paths without duplicate or unauthorized target logins.
  2. Only permitted initiators authenticate and gain mapped storage access.
  3. Storage meets tail-latency targets during planned peak data movement.
  4. I/O uses eligible optimized paths and recovers predictably after a path failure.

Explanation

Correct Answer

B:

The relevant measurable success criterion is: Only permitted initiators authenticate and gain mapped storage access. It addresses the original reported defect: An iSCSI initiator attempts to log in with stale CHAP credentials and the support team proposes disabling authentication on the target. A saved design or configuration command alone does not establish that outcome. Observe the affected system in two independent ways: Inspect negotiation and authentication failure logs without exposing secrets Validate login from the authorized initiator and rejection of an unauthorized test identity. The correction being evaluated is: Correct authorized CHAP identity and shared secret values with appropriate secret-handling and rotation procedures. The underlying reason that correction matters is: CHAP can authenticate iSCSI initiators or targets when configured consistently; bypassing it undermines storage access controls.

Incorrect Answers

A:

This metric would help validate a correction to iscsi target portal discovery, rather than the original reported issue. The other issue is: A host logs into one storage target portal and assumes all target interfaces will automatically be discovered for MPIO. Here the defect to be resolved is: An iSCSI initiator attempts to log in with stale CHAP credentials and the support team proposes disabling authentication on the target. The expected measurable outcome for the actual incident is: Only permitted initiators authenticate and gain mapped storage access. A positive result for the other service would not prove this requirement is met.

C:

This metric would help validate a correction to iscsi congestion isolation from backup, rather than the original reported issue. The other issue is: An iSCSI network shares a congested access queue with bulk VM backups and storage write latency spikes under backup load. Here the defect to be resolved is: An iSCSI initiator attempts to log in with stale CHAP credentials and the support team proposes disabling authentication on the target. The expected measurable outcome for the actual incident is: Only permitted initiators authenticate and gain mapped storage access. A positive result for the other service would not prove this requirement is met.

D:

This metric would help validate a correction to iscsi path policy active-active versus standby, rather than the original reported issue. The other issue is: A storage host uses a round-robin multipath policy against an array that supports only particular active target paths and sees path thrashing. Here the defect to be resolved is: An iSCSI initiator attempts to log in with stale CHAP credentials and the support team proposes disabling authentication on the target. The expected measurable outcome for the actual incident is: Only permitted initiators authenticate and gain mapped storage access. A positive result for the other service would not prove this requirement is met.

Question 440

At a distributed AI checkpoint storage service, a post-incident design review focuses on preventing: An iSCSI initiator attempts to log in with stale CHAP credentials and the support team proposes disabling authentication on the target. The team needs a defensible design decision rather than a vendor feature checklist. Which continuing design control best prevents the same problem from recurring?

  1. Review source bindings whenever host uplink or storage VLAN routing changes.
  2. Monitor congestion and update class mappings when new backup applications are added.
  3. Rotate secrets using secure storage and monitor denied iSCSI logins.
  4. Retest path diversity after host NIC, switch or array changes.

Explanation

Correct Answer

C:

The most relevant ongoing safeguard is: Rotate secrets using secure storage and monitor denied iSCSI logins. The risk it addresses is: An iSCSI initiator attempts to log in with stale CHAP credentials and the support team proposes disabling authentication on the target. This check is tied to the technical principle: CHAP can authenticate iSCSI initiators or targets when configured consistently; bypassing it undermines storage access controls. The immediate correction remains: Correct authorized CHAP identity and shared secret values with appropriate secret-handling and rotation procedures. Periodically validate the safeguard through two different observations. Inspect negotiation and authentication failure logs without exposing secrets Validate login from the authorized initiator and rejection of an unauthorized test identity. The continuing acceptance target is: Only permitted initiators authenticate and gain mapped storage access.

Incorrect Answers

A:

This is a continuing control for iscsi multi-subnet addressing and mpio; its underlying principle is: Intended multipathing depends on source interface and target portal routing; different logical VLAN labels alone do not guarantee independent transport paths. The recurring risk here is different: An iSCSI initiator attempts to log in with stale CHAP credentials and the support team proposes disabling authentication on the target. The appropriate ongoing control must prevent recurrence of that particular failure, not just the separate issue of: Two storage paths are configured on separate VLANs but the host's routing table sends both sessions through the same default gateway. The intended long-term acceptance condition remains: Only permitted initiators authenticate and gain mapped storage access.

B:

This is a continuing control for iscsi congestion isolation from backup; its underlying principle is: iSCSI uses IP transport and benefits from bandwidth, loss, queueing and failure-domain design separate from ordinary bulk traffic. The recurring risk here is different: An iSCSI initiator attempts to log in with stale CHAP credentials and the support team proposes disabling authentication on the target. The appropriate ongoing control must prevent recurrence of that particular failure, not just the separate issue of: An iSCSI network shares a congested access queue with bulk VM backups and storage write latency spikes under backup load. The intended long-term acceptance condition remains: Only permitted initiators authenticate and gain mapped storage access.

D:

This is a continuing control for iscsi independent fabric multipathing; its underlying principle is: Multipathing only protects against independent faults when initiator ports, transport paths and target access domains are genuinely diverse. The recurring risk here is different: An iSCSI initiator attempts to log in with stale CHAP credentials and the support team proposes disabling authentication on the target. The appropriate ongoing control must prevent recurrence of that particular failure, not just the separate issue of: A virtualization host discovers two iSCSI targets but both sessions traverse one physical NIC and access switch. The intended long-term acceptance condition remains: Only permitted initiators authenticate and gain mapped storage access.

Designing Cisco Data Center Infrastructure for Traditional and AI Workloads (300-610) Practice Tests