cert
cert-1
cert-2

Pass Cisco 300-610 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers to Pass the Actual Exam!
30 Days Free Updates, Instant Download!

cert-5
cert-6
300-610 Exam - Verified By Experts
300-610 Premium File

300-610 Premium File

$69.99
$76.99
  • Premium File 350 Questions & Answers. Last Update: Nov 13, 2026

Whats Included:

  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
 
$76.99
$69.99
accept 10 downloads in the last 7 days
block-screenshots
Cisco 300-610 Practice Test 46

Question 450

At a dual-fabric enterprise SAN, after correction, the team wants to prevent recurrence of: An iSCSI network shares a congested access queue with bulk VM backups and storage write latency spikes under backup load. The team needs a defensible design decision rather than a vendor feature checklist. Which continuing design control best prevents the same problem from recurring?

  1. Include transport MTU and encapsulation budget in storage acceptance tests.
  2. Retest path diversity after host NIC, switch or array changes.
  3. Monitor congestion and update class mappings when new backup applications are added.
  4. Review source bindings whenever host uplink or storage VLAN routing changes.

Explanation

Correct Answer

C:

The most relevant ongoing safeguard is: Monitor congestion and update class mappings when new backup applications are added. The risk it addresses is: An iSCSI network shares a congested access queue with bulk VM backups and storage write latency spikes under backup load. This check is tied to the technical principle: iSCSI uses IP transport and benefits from bandwidth, loss, queueing and failure-domain design separate from ordinary bulk traffic. The immediate correction remains: Provide appropriate QoS class, bandwidth and buffer capacity for iSCSI without falsely treating it as FCoE priority traffic. Periodically validate the safeguard through two different observations. Measure per-queue drops and TCP retransmissions Correlate iSCSI read/write latency with backup traffic bursts. The continuing acceptance target is: Storage meets tail-latency targets during planned peak data movement.

Incorrect Answers

A:

This is a continuing control for iscsi jumbo mtu end-to-end; its underlying principle is: Ethernet MTU must be compatible end to end; enabling jumbo frames at endpoints does not change each transit interface or overlay overhead. The recurring risk here is different: An iSCSI network shares a congested access queue with bulk VM backups and storage write latency spikes under backup load. The appropriate ongoing control must prevent recurrence of that particular failure, not just the separate issue of: A storage operator enables 9000-byte MTU at the host and array but large iSCSI transfers fail on the intermediate switching path. The intended long-term acceptance condition remains: Storage meets tail-latency targets during planned peak data movement.

B:

This is a continuing control for iscsi independent fabric multipathing; its underlying principle is: Multipathing only protects against independent faults when initiator ports, transport paths and target access domains are genuinely diverse. The recurring risk here is different: An iSCSI network shares a congested access queue with bulk VM backups and storage write latency spikes under backup load. The appropriate ongoing control must prevent recurrence of that particular failure, not just the separate issue of: A virtualization host discovers two iSCSI targets but both sessions traverse one physical NIC and access switch. The intended long-term acceptance condition remains: Storage meets tail-latency targets during planned peak data movement.

D:

This is a continuing control for iscsi multi-subnet addressing and mpio; its underlying principle is: Intended multipathing depends on source interface and target portal routing; different logical VLAN labels alone do not guarantee independent transport paths. The recurring risk here is different: An iSCSI network shares a congested access queue with bulk VM backups and storage write latency spikes under backup load. The appropriate ongoing control must prevent recurrence of that particular failure, not just the separate issue of: Two storage paths are configured on separate VLANs but the host's routing table sends both sessions through the same default gateway. The intended long-term acceptance condition remains: Storage meets tail-latency targets during planned peak data movement.

Question 451

At a dual-fabric enterprise SAN, a design review reports the following issue: A storage host uses a round-robin multipath policy against an array that supports only particular active target paths and sees path thrashing. The maintenance plan must not disrupt unrelated tenants. Which design correction most directly addresses this specific failure or requirement?

  1. Configure the approved discovery portals and validate target identities and supported multipath sessions.
  2. Align a supported storage path MTU across NIC, switch, fabric and target before accepting jumbo-frame requirements.
  3. Choose a supported MPIO policy consistent with target path priority and failover behavior rather than maximizing active sessions blindly.
  4. Map storage vmkernel or initiator IPs and target subnets to distinct approved path routes and bindings.

Explanation

Correct Answer

C:

The relevant failure is: A storage host uses a round-robin multipath policy against an array that supports only particular active target paths and sees path thrashing. The technical distinction is: MPIO load balancing and target asymmetric access states must match array ALUA or other vendor-specific path recommendations. The targeted correction is: Choose a supported MPIO policy consistent with target path priority and failover behavior rather than maximizing active sessions blindly. Before changing the design, check two independent observations. Inspect array path access state for each target Test failover and steady-state I/O throughput with the recommended path selection. Accept the change only if: I/O uses eligible optimized paths and recovers predictably after a path failure.

Incorrect Answers

A:

This action targets iscsi target portal discovery, where the mechanism is: iSCSI target discovery and session login specify available target portals; MPIO requires the initiator to establish supported sessions to eligible distinct paths. That is a separate condition from the problem in this question: A storage host uses a round-robin multipath policy against an array that supports only particular active target paths and sees path thrashing. Even a successful repair of the alternative would not establish the required result: I/O uses eligible optimized paths and recovers predictably after a path failure. The applicable design change must address the diagnosed mechanism of the stated case, not the neighboring design problem.

B:

This action targets iscsi jumbo mtu end-to-end, where the mechanism is: Ethernet MTU must be compatible end to end; enabling jumbo frames at endpoints does not change each transit interface or overlay overhead. That is a separate condition from the problem in this question: A storage host uses a round-robin multipath policy against an array that supports only particular active target paths and sees path thrashing. Even a successful repair of the alternative would not establish the required result: I/O uses eligible optimized paths and recovers predictably after a path failure. The applicable design change must address the diagnosed mechanism of the stated case, not the neighboring design problem.

D:

This action targets iscsi multi-subnet addressing and mpio, where the mechanism is: Intended multipathing depends on source interface and target portal routing; different logical VLAN labels alone do not guarantee independent transport paths. That is a separate condition from the problem in this question: A storage host uses a round-robin multipath policy against an array that supports only particular active target paths and sees path thrashing. Even a successful repair of the alternative would not establish the required result: I/O uses eligible optimized paths and recovers predictably after a path failure. The applicable design change must address the diagnosed mechanism of the stated case, not the neighboring design problem.

Question 452

At a converged FCoE storage network, two engineers propose competing diagnoses for this condition: A storage host uses a round-robin multipath policy against an array that supports only particular active target paths and sees path thrashing. Acceptance requires evidence from the running system, not just the saved design. Which pair of observations most directly tests the proposed diagnosis before a change?

  1. Inspect array path access state for each target; test failover and steady-state I/O throughput with the recommended path selection.
  2. List discovered IQNs and portal IP addresses; inspect actual logged-in sessions and physical egress per target path.
  3. Compare configured and operational MTUs at each hop; run a permitted large-frame path test and correlate oversize/drop counters.
  4. Trace both sessions through NICs, VLANs and switches; disconnect one approved path and observe I/O continuity and surviving throughput.

Explanation

Correct Answer

A:

The first observation is: Inspect array path access state for each target The independent second observation is: Test failover and steady-state I/O throughput with the recommended path selection. Together they test the proposed diagnosis of this incident: A storage host uses a round-robin multipath policy against an array that supports only particular active target paths and sees path thrashing. The underlying technical principle is: MPIO load balancing and target asymmetric access states must match array ALUA or other vendor-specific path recommendations. If those checks confirm it, the appropriate next action is: Choose a supported MPIO policy consistent with target path priority and failover behavior rather than maximizing active sessions blindly. The expected measurable result is: I/O uses eligible optimized paths and recovers predictably after a path failure.

Incorrect Answers

B:

These observations investigate iscsi target portal discovery; they would be useful if the symptoms were: A host logs into one storage target portal and assumes all target interfaces will automatically be discovered for MPIO. That alternative rests on the principle: iSCSI target discovery and session login specify available target portals; MPIO requires the initiator to establish supported sessions to eligible distinct paths. The question instead asks for evidence about: A storage host uses a round-robin multipath policy against an array that supports only particular active target paths and sees path thrashing. The discriminating observations here are: Inspect array path access state for each target Test failover and steady-state I/O throughput with the recommended path selection.

C:

These observations investigate iscsi jumbo mtu end-to-end; they would be useful if the symptoms were: A storage operator enables 9000-byte MTU at the host and array but large iSCSI transfers fail on the intermediate switching path. That alternative rests on the principle: Ethernet MTU must be compatible end to end; enabling jumbo frames at endpoints does not change each transit interface or overlay overhead. The question instead asks for evidence about: A storage host uses a round-robin multipath policy against an array that supports only particular active target paths and sees path thrashing. The discriminating observations here are: Inspect array path access state for each target Test failover and steady-state I/O throughput with the recommended path selection.

D:

These observations investigate iscsi independent fabric multipathing; they would be useful if the symptoms were: A virtualization host discovers two iSCSI targets but both sessions traverse one physical NIC and access switch. That alternative rests on the principle: Multipathing only protects against independent faults when initiator ports, transport paths and target access domains are genuinely diverse. The question instead asks for evidence about: A storage host uses a round-robin multipath policy against an array that supports only particular active target paths and sees path thrashing. The discriminating observations here are: Inspect array path access state for each target Test failover and steady-state I/O throughput with the recommended path selection.

Question 453

At a distributed AI checkpoint storage service, the design group challenges an assumption behind this issue: A storage host uses a round-robin multipath policy against an array that supports only particular active target paths and sees path thrashing. One component outage must remain inside the agreed availability budget. Which engineering principle best explains the observed behavior?

  1. CHAP can authenticate iSCSI initiators or targets when configured consistently; bypassing it undermines storage access controls.
  2. Intended multipathing depends on source interface and target portal routing; different logical VLAN labels alone do not guarantee independent transport paths.
  3. MPIO load balancing and target asymmetric access states must match array ALUA or other vendor-specific path recommendations.
  4. iSCSI uses IP transport and benefits from bandwidth, loss, queueing and failure-domain design separate from ordinary bulk traffic.

Explanation

Correct Answer

C:

The controlling technical principle is: MPIO load balancing and target asymmetric access states must match array ALUA or other vendor-specific path recommendations. This matters because the reported design failure is: A storage host uses a round-robin multipath policy against an array that supports only particular active target paths and sees path thrashing. The first diagnostic check is: Inspect array path access state for each target The independent check is: Test failover and steady-state I/O throughput with the recommended path selection. These facts support the targeted intervention: Choose a supported MPIO policy consistent with target path priority and failover behavior rather than maximizing active sessions blindly. Confirm that the resulting design meets this condition: I/O uses eligible optimized paths and recovers predictably after a path failure.

Incorrect Answers

A:

The offered principle describes iscsi chap credential design: CHAP can authenticate iSCSI initiators or targets when configured consistently; bypassing it undermines storage access controls. That is useful for a distinct incident, such as: An iSCSI initiator attempts to log in with stale CHAP credentials and the support team proposes disabling authentication on the target. It does not account for the reported failure: A storage host uses a round-robin multipath policy against an array that supports only particular active target paths and sees path thrashing. The governing principle in this situation is: MPIO load balancing and target asymmetric access states must match array ALUA or other vendor-specific path recommendations.

B:

The offered principle describes iscsi multi-subnet addressing and mpio: Intended multipathing depends on source interface and target portal routing; different logical VLAN labels alone do not guarantee independent transport paths. That is useful for a distinct incident, such as: Two storage paths are configured on separate VLANs but the host's routing table sends both sessions through the same default gateway. It does not account for the reported failure: A storage host uses a round-robin multipath policy against an array that supports only particular active target paths and sees path thrashing. The governing principle in this situation is: MPIO load balancing and target asymmetric access states must match array ALUA or other vendor-specific path recommendations.

D:

The offered principle describes iscsi congestion isolation from backup: iSCSI uses IP transport and benefits from bandwidth, loss, queueing and failure-domain design separate from ordinary bulk traffic. That is useful for a distinct incident, such as: An iSCSI network shares a congested access queue with bulk VM backups and storage write latency spikes under backup load. It does not account for the reported failure: A storage host uses a round-robin multipath policy against an array that supports only particular active target paths and sees path thrashing. The governing principle in this situation is: MPIO load balancing and target asymmetric access states must match array ALUA or other vendor-specific path recommendations.

Question 454

At a high-IOPS virtualized storage farm, a change has been proposed for the following condition: A storage host uses a round-robin multipath policy against an array that supports only particular active target paths and sees path thrashing. The architect must preserve the intended failure domains. Which measured result most directly proves the original requirement is satisfied?

  1. Block storage remains accessible when one initiator or fabric path fails.
  2. The initiator sees all intended eligible storage paths without duplicate or unauthorized target logins.
  3. Required iSCSI payload sizes traverse the fabric without size-specific blackholes.
  4. I/O uses eligible optimized paths and recovers predictably after a path failure.

Explanation

Correct Answer

D:

The relevant measurable success criterion is: I/O uses eligible optimized paths and recovers predictably after a path failure. It addresses the original reported defect: A storage host uses a round-robin multipath policy against an array that supports only particular active target paths and sees path thrashing. A saved design or configuration command alone does not establish that outcome. Observe the affected system in two independent ways: Inspect array path access state for each target Test failover and steady-state I/O throughput with the recommended path selection. The correction being evaluated is: Choose a supported MPIO policy consistent with target path priority and failover behavior rather than maximizing active sessions blindly. The underlying reason that correction matters is: MPIO load balancing and target asymmetric access states must match array ALUA or other vendor-specific path recommendations.

Incorrect Answers

A:

This metric would help validate a correction to iscsi independent fabric multipathing, rather than the original reported issue. The other issue is: A virtualization host discovers two iSCSI targets but both sessions traverse one physical NIC and access switch. Here the defect to be resolved is: A storage host uses a round-robin multipath policy against an array that supports only particular active target paths and sees path thrashing. The expected measurable outcome for the actual incident is: I/O uses eligible optimized paths and recovers predictably after a path failure. A positive result for the other service would not prove this requirement is met.

B:

This metric would help validate a correction to iscsi target portal discovery, rather than the original reported issue. The other issue is: A host logs into one storage target portal and assumes all target interfaces will automatically be discovered for MPIO. Here the defect to be resolved is: A storage host uses a round-robin multipath policy against an array that supports only particular active target paths and sees path thrashing. The expected measurable outcome for the actual incident is: I/O uses eligible optimized paths and recovers predictably after a path failure. A positive result for the other service would not prove this requirement is met.

C:

This metric would help validate a correction to iscsi jumbo mtu end-to-end, rather than the original reported issue. The other issue is: A storage operator enables 9000-byte MTU at the host and array but large iSCSI transfers fail on the intermediate switching path. Here the defect to be resolved is: A storage host uses a round-robin multipath policy against an array that supports only particular active target paths and sees path thrashing. The expected measurable outcome for the actual incident is: I/O uses eligible optimized paths and recovers predictably after a path failure. A positive result for the other service would not prove this requirement is met.

Question 455

At a storage-replication data center, a post-incident design review focuses on preventing: A storage host uses a round-robin multipath policy against an array that supports only particular active target paths and sees path thrashing. The team needs a defensible design decision rather than a vendor feature checklist. Which continuing design control best prevents the same problem from recurring?

  1. Retest multipath policy after array firmware or host driver upgrades.
  2. Review source bindings whenever host uplink or storage VLAN routing changes.
  3. Monitor congestion and update class mappings when new backup applications are added.
  4. Retest path diversity after host NIC, switch or array changes.

Explanation

Correct Answer

A:

The most relevant ongoing safeguard is: Retest multipath policy after array firmware or host driver upgrades. The risk it addresses is: A storage host uses a round-robin multipath policy against an array that supports only particular active target paths and sees path thrashing. This check is tied to the technical principle: MPIO load balancing and target asymmetric access states must match array ALUA or other vendor-specific path recommendations. The immediate correction remains: Choose a supported MPIO policy consistent with target path priority and failover behavior rather than maximizing active sessions blindly. Periodically validate the safeguard through two different observations. Inspect array path access state for each target Test failover and steady-state I/O throughput with the recommended path selection. The continuing acceptance target is: I/O uses eligible optimized paths and recovers predictably after a path failure.

Incorrect Answers

B:

This is a continuing control for iscsi multi-subnet addressing and mpio; its underlying principle is: Intended multipathing depends on source interface and target portal routing; different logical VLAN labels alone do not guarantee independent transport paths. The recurring risk here is different: A storage host uses a round-robin multipath policy against an array that supports only particular active target paths and sees path thrashing. The appropriate ongoing control must prevent recurrence of that particular failure, not just the separate issue of: Two storage paths are configured on separate VLANs but the host's routing table sends both sessions through the same default gateway. The intended long-term acceptance condition remains: I/O uses eligible optimized paths and recovers predictably after a path failure.

C:

This is a continuing control for iscsi congestion isolation from backup; its underlying principle is: iSCSI uses IP transport and benefits from bandwidth, loss, queueing and failure-domain design separate from ordinary bulk traffic. The recurring risk here is different: A storage host uses a round-robin multipath policy against an array that supports only particular active target paths and sees path thrashing. The appropriate ongoing control must prevent recurrence of that particular failure, not just the separate issue of: An iSCSI network shares a congested access queue with bulk VM backups and storage write latency spikes under backup load. The intended long-term acceptance condition remains: I/O uses eligible optimized paths and recovers predictably after a path failure.

D:

This is a continuing control for iscsi independent fabric multipathing; its underlying principle is: Multipathing only protects against independent faults when initiator ports, transport paths and target access domains are genuinely diverse. The recurring risk here is different: A storage host uses a round-robin multipath policy against an array that supports only particular active target paths and sees path thrashing. The appropriate ongoing control must prevent recurrence of that particular failure, not just the separate issue of: A virtualization host discovers two iSCSI targets but both sessions traverse one physical NIC and access switch. The intended long-term acceptance condition remains: I/O uses eligible optimized paths and recovers predictably after a path failure.

Question 456

At a storage-replication data center, during a controlled design review, the team discovers: A Fibre Channel fabric has healthy physical links but one slow storage target causes upstream ports to stop transmitting for lack of credits. The maintenance plan must not disrupt unrelated tenants. Which design correction most directly addresses this specific failure or requirement?

  1. Identify the slow-drain device or oversubscribed path and correct its bottleneck before indiscriminately increasing credits.
  2. Evaluate per-port buffer credit requirements, ISL link distance and storage burst behavior together.
  3. Select supported FC QoS and class-of-service mappings based on storage service requirements, not generic IP settings.
  4. Define the approved DSCP/class marking and verify policy at each routed and switched hop.

Explanation

Correct Answer

A:

The relevant failure is: A Fibre Channel fabric has healthy physical links but one slow storage target causes upstream ports to stop transmitting for lack of credits. The technical distinction is: FC buffer-to-buffer credit flow control can propagate congestion from a slow-drain endpoint across shared ISLs. The targeted correction is: Identify the slow-drain device or oversubscribed path and correct its bottleneck before indiscriminately increasing credits. Before changing the design, check two independent observations. Inspect BB-credit-zero and congestion events on adjacent FC ports Compare target response time with ISL utilization for affected flows. Accept the change only if: Well-behaved SAN paths no longer stall behind the slow target.

Incorrect Answers

B:

This action targets san burst buffer and latency, where the mechanism is: Short FC bursts can exhaust buffer credits even when long-period average utilization suggests spare capacity. That is a separate condition from the problem in this question: A Fibre Channel fabric has healthy physical links but one slow storage target causes upstream ports to stop transmitting for lack of credits. Even a successful repair of the alternative would not establish the required result: Well-behaved SAN paths no longer stall behind the slow target. The applicable design change must address the diagnosed mechanism of the stated case, not the neighboring design problem.

C:

This action targets fibre channel qos class expectations, where the mechanism is: Fibre Channel fabric QoS and congestion controls use FC-specific classes and credits with platform capabilities distinct from Ethernet IP QoS. That is a separate condition from the problem in this question: A Fibre Channel fabric has healthy physical links but one slow storage target causes upstream ports to stop transmitting for lack of credits. Even a successful repair of the alternative would not establish the required result: Well-behaved SAN paths no longer stall behind the slow target. The applicable design change must address the diagnosed mechanism of the stated case, not the neighboring design problem.

D:

This action targets iscsi dscp-to-queue contract, where the mechanism is: End-to-end iSCSI QoS depends on consistent classification and queuing; packets need not retain their host's mark unless policy trusts it. That is a separate condition from the problem in this question: A Fibre Channel fabric has healthy physical links but one slow storage target causes upstream ports to stop transmitting for lack of credits. Even a successful repair of the alternative would not establish the required result: Well-behaved SAN paths no longer stall behind the slow target. The applicable design change must address the diagnosed mechanism of the stated case, not the neighboring design problem.

Question 457

At a dual-fabric enterprise SAN, before changing the fabric, the team observes: A Fibre Channel fabric has healthy physical links but one slow storage target causes upstream ports to stop transmitting for lack of credits. Acceptance requires evidence from the running system, not just the saved design. Which pair of observations most directly tests the proposed diagnosis before a change?

  1. Measure per-ISL throughput and BB-credit stress; compare peak host-to-target flows against the available fabric trunk capacity.
  2. Inspect BB-credit-zero and congestion events on adjacent FC ports; compare target response time with ISL utilization for affected flows.
  3. Inspect ingress and egress CoS/priority maps; correlate dropped FCoE frames or fabric logouts with transit queue counters.
  4. Capture per-port BB-credit and throughput at short intervals; correlate bursts with I/O latency and affected port buffers.

Explanation

Correct Answer

B:

The first observation is: Inspect BB-credit-zero and congestion events on adjacent FC ports The independent second observation is: Compare target response time with ISL utilization for affected flows. Together they test the proposed diagnosis of this incident: A Fibre Channel fabric has healthy physical links but one slow storage target causes upstream ports to stop transmitting for lack of credits. The underlying technical principle is: FC buffer-to-buffer credit flow control can propagate congestion from a slow-drain endpoint across shared ISLs. If those checks confirm it, the appropriate next action is: Identify the slow-drain device or oversubscribed path and correct its bottleneck before indiscriminately increasing credits. The expected measurable result is: Well-behaved SAN paths no longer stall behind the slow target.

Incorrect Answers

A:

These observations investigate isl oversubscription for peak san load; they would be useful if the symptoms were: Two FC switches have numerous high-speed host ports but one underprovisioned inter-switch link carries every storage flow. That alternative rests on the principle: Inter-switch link bandwidth and traffic locality determine SAN oversubscription; host-port nominal rates cannot all be assumed simultaneous across one ISL. The question instead asks for evidence about: A Fibre Channel fabric has healthy physical links but one slow storage target causes upstream ports to stop transmitting for lack of credits. The discriminating observations here are: Inspect BB-credit-zero and congestion events on adjacent FC ports Compare target response time with ISL utilization for affected flows.

C:

These observations investigate fcoe priority-flow consistency; they would be useful if the symptoms were: FCoE storage frames arrive on a converged Ethernet fabric with a lossless priority but get remapped to a lossy queue in a transit switch. That alternative rests on the principle: FCoE requires consistent DCB/FCoE traffic classification and PFC handling along the supported converged path. The question instead asks for evidence about: A Fibre Channel fabric has healthy physical links but one slow storage target causes upstream ports to stop transmitting for lack of credits. The discriminating observations here are: Inspect BB-credit-zero and congestion events on adjacent FC ports Compare target response time with ISL utilization for affected flows.

D:

These observations investigate san burst buffer and latency; they would be useful if the symptoms were: A storage-array controller briefly bursts high-rate FC traffic and one upstream port shows repeated credit loss, yet average utilization is low. That alternative rests on the principle: Short FC bursts can exhaust buffer credits even when long-period average utilization suggests spare capacity. The question instead asks for evidence about: A Fibre Channel fabric has healthy physical links but one slow storage target causes upstream ports to stop transmitting for lack of credits. The discriminating observations here are: Inspect BB-credit-zero and congestion events on adjacent FC ports Compare target response time with ISL utilization for affected flows.

Question 458

At a converged FCoE storage network, the data-center team needs to explain this behavior: A Fibre Channel fabric has healthy physical links but one slow storage target causes upstream ports to stop transmitting for lack of credits. One component outage must remain inside the agreed availability budget. Which engineering principle best explains the observed behavior?

  1. End-to-end iSCSI QoS depends on consistent classification and queuing; packets need not retain their host's mark unless policy trusts it.
  2. FC buffer-to-buffer credit flow control can propagate congestion from a slow-drain endpoint across shared ISLs.
  3. Native FC uses its own fabric credit flow control; FCoE uses DCB/PFC transport; iSCSI operates on TCP/IP and ordinary IP congestion behavior.
  4. Fibre Channel fabric QoS and congestion controls use FC-specific classes and credits with platform capabilities distinct from Ethernet IP QoS.

Explanation

Correct Answer

B:

The controlling technical principle is: FC buffer-to-buffer credit flow control can propagate congestion from a slow-drain endpoint across shared ISLs. This matters because the reported design failure is: A Fibre Channel fabric has healthy physical links but one slow storage target causes upstream ports to stop transmitting for lack of credits. The first diagnostic check is: Inspect BB-credit-zero and congestion events on adjacent FC ports The independent check is: Compare target response time with ISL utilization for affected flows. These facts support the targeted intervention: Identify the slow-drain device or oversubscribed path and correct its bottleneck before indiscriminately increasing credits. Confirm that the resulting design meets this condition: Well-behaved SAN paths no longer stall behind the slow target.

Incorrect Answers

A:

The offered principle describes iscsi dscp-to-queue contract: End-to-end iSCSI QoS depends on consistent classification and queuing; packets need not retain their host's mark unless policy trusts it. That is useful for a distinct incident, such as: A host marks iSCSI packets with one DSCP value but upstream switches apply a different trust boundary and storage requests are delayed. It does not account for the reported failure: A Fibre Channel fabric has healthy physical links but one slow storage target causes upstream ports to stop transmitting for lack of credits. The governing principle in this situation is: FC buffer-to-buffer credit flow control can propagate congestion from a slow-drain endpoint across shared ISLs.

C:

The offered principle describes fc versus iscsi unified traffic requirements: Native FC uses its own fabric credit flow control; FCoE uses DCB/PFC transport; iSCSI operates on TCP/IP and ordinary IP congestion behavior. That is useful for a distinct incident, such as: An architecture applies a single generic congestion policy to native Fibre Channel, FCoE and iSCSI, ignoring their different transport mechanisms. It does not account for the reported failure: A Fibre Channel fabric has healthy physical links but one slow storage target causes upstream ports to stop transmitting for lack of credits. The governing principle in this situation is: FC buffer-to-buffer credit flow control can propagate congestion from a slow-drain endpoint across shared ISLs.

D:

The offered principle describes fibre channel qos class expectations: Fibre Channel fabric QoS and congestion controls use FC-specific classes and credits with platform capabilities distinct from Ethernet IP QoS. That is useful for a distinct incident, such as: A SAN QoS policy prioritizes certain FC traffic but the design assumes FC behaves like ordinary routed IP DSCP scheduling. It does not account for the reported failure: A Fibre Channel fabric has healthy physical links but one slow storage target causes upstream ports to stop transmitting for lack of credits. The governing principle in this situation is: FC buffer-to-buffer credit flow control can propagate congestion from a slow-drain endpoint across shared ISLs.

Question 459

At a distributed AI checkpoint storage service, the team completed an authorized repair for: A Fibre Channel fabric has healthy physical links but one slow storage target causes upstream ports to stop transmitting for lack of credits. The architect must preserve the intended failure domains. Which measured result most directly proves the original requirement is satisfied?

  1. Storage traffic reaches its intended scheduler class with predictable service.
  2. The SAN handles planned bursts with bounded latency and no sustained credit starvation.
  3. Well-behaved SAN paths no longer stall behind the slow target.
  4. Critical storage flows meet bandwidth targets without persistent ISL contention.

Explanation

Correct Answer

C:

The relevant measurable success criterion is: Well-behaved SAN paths no longer stall behind the slow target. It addresses the original reported defect: A Fibre Channel fabric has healthy physical links but one slow storage target causes upstream ports to stop transmitting for lack of credits. A saved design or configuration command alone does not establish that outcome. Observe the affected system in two independent ways: Inspect BB-credit-zero and congestion events on adjacent FC ports Compare target response time with ISL utilization for affected flows. The correction being evaluated is: Identify the slow-drain device or oversubscribed path and correct its bottleneck before indiscriminately increasing credits. The underlying reason that correction matters is: FC buffer-to-buffer credit flow control can propagate congestion from a slow-drain endpoint across shared ISLs.

Incorrect Answers

A:

This metric would help validate a correction to iscsi dscp-to-queue contract, rather than the original reported issue. The other issue is: A host marks iSCSI packets with one DSCP value but upstream switches apply a different trust boundary and storage requests are delayed. Here the defect to be resolved is: A Fibre Channel fabric has healthy physical links but one slow storage target causes upstream ports to stop transmitting for lack of credits. The expected measurable outcome for the actual incident is: Well-behaved SAN paths no longer stall behind the slow target. A positive result for the other service would not prove this requirement is met.

B:

This metric would help validate a correction to san burst buffer and latency, rather than the original reported issue. The other issue is: A storage-array controller briefly bursts high-rate FC traffic and one upstream port shows repeated credit loss, yet average utilization is low. Here the defect to be resolved is: A Fibre Channel fabric has healthy physical links but one slow storage target causes upstream ports to stop transmitting for lack of credits. The expected measurable outcome for the actual incident is: Well-behaved SAN paths no longer stall behind the slow target. A positive result for the other service would not prove this requirement is met.

D:

This metric would help validate a correction to isl oversubscription for peak san load, rather than the original reported issue. The other issue is: Two FC switches have numerous high-speed host ports but one underprovisioned inter-switch link carries every storage flow. Here the defect to be resolved is: A Fibre Channel fabric has healthy physical links but one slow storage target causes upstream ports to stop transmitting for lack of credits. The expected measurable outcome for the actual incident is: Well-behaved SAN paths no longer stall behind the slow target. A positive result for the other service would not prove this requirement is met.

Question 460

At a high-IOPS virtualized storage farm, the architecture standards group considers the recurring risk: A Fibre Channel fabric has healthy physical links but one slow storage target causes upstream ports to stop transmitting for lack of credits. The team needs a defensible design decision rather than a vendor feature checklist. Which continuing design control best prevents the same problem from recurring?

  1. Monitor slow-drain indicators and isolate high-risk targets where supported.
  2. Review FC service classes whenever SAN zones and applications change.
  3. Include microburst stress in storage fabric qualification.
  4. Run DCB compatibility tests after upgrading switches or UCS fabrics.

Explanation

Correct Answer

A:

The most relevant ongoing safeguard is: Monitor slow-drain indicators and isolate high-risk targets where supported. The risk it addresses is: A Fibre Channel fabric has healthy physical links but one slow storage target causes upstream ports to stop transmitting for lack of credits. This check is tied to the technical principle: FC buffer-to-buffer credit flow control can propagate congestion from a slow-drain endpoint across shared ISLs. The immediate correction remains: Identify the slow-drain device or oversubscribed path and correct its bottleneck before indiscriminately increasing credits. Periodically validate the safeguard through two different observations. Inspect BB-credit-zero and congestion events on adjacent FC ports Compare target response time with ISL utilization for affected flows. The continuing acceptance target is: Well-behaved SAN paths no longer stall behind the slow target.

Incorrect Answers

B:

This is a continuing control for fibre channel qos class expectations; its underlying principle is: Fibre Channel fabric QoS and congestion controls use FC-specific classes and credits with platform capabilities distinct from Ethernet IP QoS. The recurring risk here is different: A Fibre Channel fabric has healthy physical links but one slow storage target causes upstream ports to stop transmitting for lack of credits. The appropriate ongoing control must prevent recurrence of that particular failure, not just the separate issue of: A SAN QoS policy prioritizes certain FC traffic but the design assumes FC behaves like ordinary routed IP DSCP scheduling. The intended long-term acceptance condition remains: Well-behaved SAN paths no longer stall behind the slow target.

C:

This is a continuing control for san burst buffer and latency; its underlying principle is: Short FC bursts can exhaust buffer credits even when long-period average utilization suggests spare capacity. The recurring risk here is different: A Fibre Channel fabric has healthy physical links but one slow storage target causes upstream ports to stop transmitting for lack of credits. The appropriate ongoing control must prevent recurrence of that particular failure, not just the separate issue of: A storage-array controller briefly bursts high-rate FC traffic and one upstream port shows repeated credit loss, yet average utilization is low. The intended long-term acceptance condition remains: Well-behaved SAN paths no longer stall behind the slow target.

D:

This is a continuing control for fcoe priority-flow consistency; its underlying principle is: FCoE requires consistent DCB/FCoE traffic classification and PFC handling along the supported converged path. The recurring risk here is different: A Fibre Channel fabric has healthy physical links but one slow storage target causes upstream ports to stop transmitting for lack of credits. The appropriate ongoing control must prevent recurrence of that particular failure, not just the separate issue of: FCoE storage frames arrive on a converged Ethernet fabric with a lossless priority but get remapped to a lossy queue in a transit switch. The intended long-term acceptance condition remains: Well-behaved SAN paths no longer stall behind the slow target.

Designing Cisco Data Center Infrastructure for Traditional and AI Workloads (300-610) Practice Tests