cert
cert-1
cert-2

Pass Cisco 300-610 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers to Pass the Actual Exam!
30 Days Free Updates, Instant Download!

cert-5
cert-6
300-610 Exam - Verified By Experts
300-610 Premium File

300-610 Premium File

$69.99
$76.99
  • Premium File 350 Questions & Answers. Last Update: Nov 13, 2026

Whats Included:

  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
 
$76.99
$69.99
accept 10 downloads in the last 7 days
block-screenshots
Cisco 300-610 Practice Test 43

Question 420

At a modular X-Series compute design, after correction, the team wants to prevent recurrence of: A cluster can reboot any individual compute host, but training restarts from the beginning because checkpoints remain on the failed node. The team needs a defensible design decision rather than a vendor feature checklist. Which continuing design control best prevents the same problem from recurring?

  1. Monitor per-tenant saturation and revise placement as model sizes change.
  2. Profile the input pipeline on each model or dataset change.
  3. Test checkpoint restore regularly and after changing distributed training frameworks.
  4. Qualify GPU kernels when compiler or framework versions change.

Explanation

Correct Answer

C:

The most relevant ongoing safeguard is: Test checkpoint restore regularly and after changing distributed training frameworks. The risk it addresses is: A cluster can reboot any individual compute host, but training restarts from the beginning because checkpoints remain on the failed node. This check is tied to the technical principle: Local accelerator or host memory is not durable distributed state; model checkpoints require resilient storage and restart orchestration. The immediate correction remains: Persist checkpoints to appropriately resilient storage and test coordinated job recovery. Periodically validate the safeguard through two different observations. Inspect actual checkpoint destination and consistency Simulate one worker loss and measure resumed training progress. The continuing acceptance target is: A worker failure preserves recoverable training state within the approved recovery point.

Incorrect Answers

A:

This is a continuing control for ai inference gpu multiplexing; its underlying principle is: Supported GPU partitioning or scheduling can raise utilization, but isolation and memory/latency bounds must be validated. The recurring risk here is different: A cluster can reboot any individual compute host, but training restarts from the beginning because checkpoints remain on the failed node. The appropriate ongoing control must prevent recurrence of that particular failure, not just the separate issue of: A shared GPU service assigns one entire accelerator to each small inference tenant despite low duty cycles and strict latency targets. The intended long-term acceptance condition remains: A worker failure preserves recoverable training state within the approved recovery point.

B:

This is a continuing control for ai cpu data pipeline bottleneck; its underlying principle is: AI training throughput can be gated by CPU data loading and preprocessing even when GPU FLOPS are abundant. The recurring risk here is different: A cluster can reboot any individual compute host, but training restarts from the beginning because checkpoints remain on the failed node. The appropriate ongoing control must prevent recurrence of that particular failure, not just the separate issue of: A GPU fleet reports low accelerator occupancy while host CPUs decode and preprocess training samples slowly. The intended long-term acceptance condition remains: A worker failure preserves recoverable training state within the approved recovery point.

D:

This is a continuing control for ai accelerator mixed precision compatibility; its underlying principle is: Tensor compute precision, accelerator kernels and driver support can affect workload correctness and performance independent of advertised core count. The recurring risk here is different: A cluster can reboot any individual compute host, but training restarts from the beginning because checkpoints remain on the failed node. The appropriate ongoing control must prevent recurrence of that particular failure, not just the separate issue of: A training bill of materials assumes every listed GPU supports the same tensor precision and software runtime features despite different generations. The intended long-term acceptance condition remains: A worker failure preserves recoverable training state within the approved recovery point.

Question 421

At a converged FCoE storage network, a design review reports the following issue: A virtualization host discovers two iSCSI targets but both sessions traverse one physical NIC and access switch. The maintenance plan must not disrupt unrelated tenants. Which design correction most directly addresses this specific failure or requirement?

  1. Correct authorized CHAP identity and shared secret values with appropriate secret-handling and rotation procedures.
  2. Design separated iSCSI initiator-to-target paths and a supported MPIO policy with distinct failure domains.
  3. Map storage vmkernel or initiator IPs and target subnets to distinct approved path routes and bindings.
  4. Provide appropriate QoS class, bandwidth and buffer capacity for iSCSI without falsely treating it as FCoE priority traffic.

Explanation

Correct Answer

B:

The relevant failure is: A virtualization host discovers two iSCSI targets but both sessions traverse one physical NIC and access switch. The technical distinction is: Multipathing only protects against independent faults when initiator ports, transport paths and target access domains are genuinely diverse. The targeted correction is: Design separated iSCSI initiator-to-target paths and a supported MPIO policy with distinct failure domains. Before changing the design, check two independent observations. Trace both sessions through NICs, VLANs and switches Disconnect one approved path and observe I/O continuity and surviving throughput. Accept the change only if: Block storage remains accessible when one initiator or fabric path fails.

Incorrect Answers

A:

This action targets iscsi chap credential design, where the mechanism is: CHAP can authenticate iSCSI initiators or targets when configured consistently; bypassing it undermines storage access controls. That is a separate condition from the problem in this question: A virtualization host discovers two iSCSI targets but both sessions traverse one physical NIC and access switch. Even a successful repair of the alternative would not establish the required result: Block storage remains accessible when one initiator or fabric path fails. The applicable design change must address the diagnosed mechanism of the stated case, not the neighboring design problem.

C:

This action targets iscsi multi-subnet addressing and mpio, where the mechanism is: Intended multipathing depends on source interface and target portal routing; different logical VLAN labels alone do not guarantee independent transport paths. That is a separate condition from the problem in this question: A virtualization host discovers two iSCSI targets but both sessions traverse one physical NIC and access switch. Even a successful repair of the alternative would not establish the required result: Block storage remains accessible when one initiator or fabric path fails. The applicable design change must address the diagnosed mechanism of the stated case, not the neighboring design problem.

D:

This action targets iscsi congestion isolation from backup, where the mechanism is: iSCSI uses IP transport and benefits from bandwidth, loss, queueing and failure-domain design separate from ordinary bulk traffic. That is a separate condition from the problem in this question: A virtualization host discovers two iSCSI targets but both sessions traverse one physical NIC and access switch. Even a successful repair of the alternative would not establish the required result: Block storage remains accessible when one initiator or fabric path fails. The applicable design change must address the diagnosed mechanism of the stated case, not the neighboring design problem.

Question 422

At a distributed AI checkpoint storage service, two engineers propose competing diagnoses for this condition: A virtualization host discovers two iSCSI targets but both sessions traverse one physical NIC and access switch. Acceptance requires evidence from the running system, not just the saved design. Which pair of observations most directly tests the proposed diagnosis before a change?

  1. Inspect negotiation and authentication failure logs without exposing secrets; validate login from the authorized initiator and rejection of an unauthorized test identity.
  2. Trace both sessions through NICs, VLANs and switches; disconnect one approved path and observe I/O continuity and surviving throughput.
  3. Measure per-queue drops and TCP retransmissions; correlate iSCSI read/write latency with backup traffic bursts.
  4. Inspect each initiator source IP and route to its target portal; trace physical NIC utilization for simultaneous sessions.

Explanation

Correct Answer

B:

The first observation is: Trace both sessions through NICs, VLANs and switches The independent second observation is: Disconnect one approved path and observe I/O continuity and surviving throughput. Together they test the proposed diagnosis of this incident: A virtualization host discovers two iSCSI targets but both sessions traverse one physical NIC and access switch. The underlying technical principle is: Multipathing only protects against independent faults when initiator ports, transport paths and target access domains are genuinely diverse. If those checks confirm it, the appropriate next action is: Design separated iSCSI initiator-to-target paths and a supported MPIO policy with distinct failure domains. The expected measurable result is: Block storage remains accessible when one initiator or fabric path fails.

Incorrect Answers

A:

These observations investigate iscsi chap credential design; they would be useful if the symptoms were: An iSCSI initiator attempts to log in with stale CHAP credentials and the support team proposes disabling authentication on the target. That alternative rests on the principle: CHAP can authenticate iSCSI initiators or targets when configured consistently; bypassing it undermines storage access controls. The question instead asks for evidence about: A virtualization host discovers two iSCSI targets but both sessions traverse one physical NIC and access switch. The discriminating observations here are: Trace both sessions through NICs, VLANs and switches Disconnect one approved path and observe I/O continuity and surviving throughput.

C:

These observations investigate iscsi congestion isolation from backup; they would be useful if the symptoms were: An iSCSI network shares a congested access queue with bulk VM backups and storage write latency spikes under backup load. That alternative rests on the principle: iSCSI uses IP transport and benefits from bandwidth, loss, queueing and failure-domain design separate from ordinary bulk traffic. The question instead asks for evidence about: A virtualization host discovers two iSCSI targets but both sessions traverse one physical NIC and access switch. The discriminating observations here are: Trace both sessions through NICs, VLANs and switches Disconnect one approved path and observe I/O continuity and surviving throughput.

D:

These observations investigate iscsi multi-subnet addressing and mpio; they would be useful if the symptoms were: Two storage paths are configured on separate VLANs but the host's routing table sends both sessions through the same default gateway. That alternative rests on the principle: Intended multipathing depends on source interface and target portal routing; different logical VLAN labels alone do not guarantee independent transport paths. The question instead asks for evidence about: A virtualization host discovers two iSCSI targets but both sessions traverse one physical NIC and access switch. The discriminating observations here are: Trace both sessions through NICs, VLANs and switches Disconnect one approved path and observe I/O continuity and surviving throughput.

Question 423

At a high-IOPS virtualized storage farm, the design group challenges an assumption behind this issue: A virtualization host discovers two iSCSI targets but both sessions traverse one physical NIC and access switch. One component outage must remain inside the agreed availability budget. Which engineering principle best explains the observed behavior?

  1. iSCSI target discovery and session login specify available target portals; MPIO requires the initiator to establish supported sessions to eligible distinct paths.
  2. iSCSI uses IP transport and benefits from bandwidth, loss, queueing and failure-domain design separate from ordinary bulk traffic.
  3. Ethernet MTU must be compatible end to end; enabling jumbo frames at endpoints does not change each transit interface or overlay overhead.
  4. Multipathing only protects against independent faults when initiator ports, transport paths and target access domains are genuinely diverse.

Explanation

Correct Answer

D:

The controlling technical principle is: Multipathing only protects against independent faults when initiator ports, transport paths and target access domains are genuinely diverse. This matters because the reported design failure is: A virtualization host discovers two iSCSI targets but both sessions traverse one physical NIC and access switch. The first diagnostic check is: Trace both sessions through NICs, VLANs and switches The independent check is: Disconnect one approved path and observe I/O continuity and surviving throughput. These facts support the targeted intervention: Design separated iSCSI initiator-to-target paths and a supported MPIO policy with distinct failure domains. Confirm that the resulting design meets this condition: Block storage remains accessible when one initiator or fabric path fails.

Incorrect Answers

A:

The offered principle describes iscsi target portal discovery: iSCSI target discovery and session login specify available target portals; MPIO requires the initiator to establish supported sessions to eligible distinct paths. That is useful for a distinct incident, such as: A host logs into one storage target portal and assumes all target interfaces will automatically be discovered for MPIO. It does not account for the reported failure: A virtualization host discovers two iSCSI targets but both sessions traverse one physical NIC and access switch. The governing principle in this situation is: Multipathing only protects against independent faults when initiator ports, transport paths and target access domains are genuinely diverse.

B:

The offered principle describes iscsi congestion isolation from backup: iSCSI uses IP transport and benefits from bandwidth, loss, queueing and failure-domain design separate from ordinary bulk traffic. That is useful for a distinct incident, such as: An iSCSI network shares a congested access queue with bulk VM backups and storage write latency spikes under backup load. It does not account for the reported failure: A virtualization host discovers two iSCSI targets but both sessions traverse one physical NIC and access switch. The governing principle in this situation is: Multipathing only protects against independent faults when initiator ports, transport paths and target access domains are genuinely diverse.

C:

The offered principle describes iscsi jumbo mtu end-to-end: Ethernet MTU must be compatible end to end; enabling jumbo frames at endpoints does not change each transit interface or overlay overhead. That is useful for a distinct incident, such as: A storage operator enables 9000-byte MTU at the host and array but large iSCSI transfers fail on the intermediate switching path. It does not account for the reported failure: A virtualization host discovers two iSCSI targets but both sessions traverse one physical NIC and access switch. The governing principle in this situation is: Multipathing only protects against independent faults when initiator ports, transport paths and target access domains are genuinely diverse.

Question 424

At a storage-replication data center, a change has been proposed for the following condition: A virtualization host discovers two iSCSI targets but both sessions traverse one physical NIC and access switch. The architect must preserve the intended failure domains. Which measured result most directly proves the original requirement is satisfied?

  1. Only permitted initiators authenticate and gain mapped storage access.
  2. Storage meets tail-latency targets during planned peak data movement.
  3. I/O uses eligible optimized paths and recovers predictably after a path failure.
  4. Block storage remains accessible when one initiator or fabric path fails.

Explanation

Correct Answer

D:

The relevant measurable success criterion is: Block storage remains accessible when one initiator or fabric path fails. It addresses the original reported defect: A virtualization host discovers two iSCSI targets but both sessions traverse one physical NIC and access switch. A saved design or configuration command alone does not establish that outcome. Observe the affected system in two independent ways: Trace both sessions through NICs, VLANs and switches Disconnect one approved path and observe I/O continuity and surviving throughput. The correction being evaluated is: Design separated iSCSI initiator-to-target paths and a supported MPIO policy with distinct failure domains. The underlying reason that correction matters is: Multipathing only protects against independent faults when initiator ports, transport paths and target access domains are genuinely diverse.

Incorrect Answers

A:

This metric would help validate a correction to iscsi chap credential design, rather than the original reported issue. The other issue is: An iSCSI initiator attempts to log in with stale CHAP credentials and the support team proposes disabling authentication on the target. Here the defect to be resolved is: A virtualization host discovers two iSCSI targets but both sessions traverse one physical NIC and access switch. The expected measurable outcome for the actual incident is: Block storage remains accessible when one initiator or fabric path fails. A positive result for the other service would not prove this requirement is met.

B:

This metric would help validate a correction to iscsi congestion isolation from backup, rather than the original reported issue. The other issue is: An iSCSI network shares a congested access queue with bulk VM backups and storage write latency spikes under backup load. Here the defect to be resolved is: A virtualization host discovers two iSCSI targets but both sessions traverse one physical NIC and access switch. The expected measurable outcome for the actual incident is: Block storage remains accessible when one initiator or fabric path fails. A positive result for the other service would not prove this requirement is met.

C:

This metric would help validate a correction to iscsi path policy active-active versus standby, rather than the original reported issue. The other issue is: A storage host uses a round-robin multipath policy against an array that supports only particular active target paths and sees path thrashing. Here the defect to be resolved is: A virtualization host discovers two iSCSI targets but both sessions traverse one physical NIC and access switch. The expected measurable outcome for the actual incident is: Block storage remains accessible when one initiator or fabric path fails. A positive result for the other service would not prove this requirement is met.

Question 425

At a dual-fabric enterprise SAN, a post-incident design review focuses on preventing: A virtualization host discovers two iSCSI targets but both sessions traverse one physical NIC and access switch. The team needs a defensible design decision rather than a vendor feature checklist. Which continuing design control best prevents the same problem from recurring?

  1. Rotate secrets using secure storage and monitor denied iSCSI logins.
  2. Include transport MTU and encapsulation budget in storage acceptance tests.
  3. Retest multipath policy after array firmware or host driver upgrades.
  4. Retest path diversity after host NIC, switch or array changes.

Explanation

Correct Answer

D:

The most relevant ongoing safeguard is: Retest path diversity after host NIC, switch or array changes. The risk it addresses is: A virtualization host discovers two iSCSI targets but both sessions traverse one physical NIC and access switch. This check is tied to the technical principle: Multipathing only protects against independent faults when initiator ports, transport paths and target access domains are genuinely diverse. The immediate correction remains: Design separated iSCSI initiator-to-target paths and a supported MPIO policy with distinct failure domains. Periodically validate the safeguard through two different observations. Trace both sessions through NICs, VLANs and switches Disconnect one approved path and observe I/O continuity and surviving throughput. The continuing acceptance target is: Block storage remains accessible when one initiator or fabric path fails.

Incorrect Answers

A:

This is a continuing control for iscsi chap credential design; its underlying principle is: CHAP can authenticate iSCSI initiators or targets when configured consistently; bypassing it undermines storage access controls. The recurring risk here is different: A virtualization host discovers two iSCSI targets but both sessions traverse one physical NIC and access switch. The appropriate ongoing control must prevent recurrence of that particular failure, not just the separate issue of: An iSCSI initiator attempts to log in with stale CHAP credentials and the support team proposes disabling authentication on the target. The intended long-term acceptance condition remains: Block storage remains accessible when one initiator or fabric path fails.

B:

This is a continuing control for iscsi jumbo mtu end-to-end; its underlying principle is: Ethernet MTU must be compatible end to end; enabling jumbo frames at endpoints does not change each transit interface or overlay overhead. The recurring risk here is different: A virtualization host discovers two iSCSI targets but both sessions traverse one physical NIC and access switch. The appropriate ongoing control must prevent recurrence of that particular failure, not just the separate issue of: A storage operator enables 9000-byte MTU at the host and array but large iSCSI transfers fail on the intermediate switching path. The intended long-term acceptance condition remains: Block storage remains accessible when one initiator or fabric path fails.

C:

This is a continuing control for iscsi path policy active-active versus standby; its underlying principle is: MPIO load balancing and target asymmetric access states must match array ALUA or other vendor-specific path recommendations. The recurring risk here is different: A virtualization host discovers two iSCSI targets but both sessions traverse one physical NIC and access switch. The appropriate ongoing control must prevent recurrence of that particular failure, not just the separate issue of: A storage host uses a round-robin multipath policy against an array that supports only particular active target paths and sees path thrashing. The intended long-term acceptance condition remains: Block storage remains accessible when one initiator or fabric path fails.

Question 426

At a dual-fabric enterprise SAN, during a controlled design review, the team discovers: A host logs into one storage target portal and assumes all target interfaces will automatically be discovered for MPIO. The maintenance plan must not disrupt unrelated tenants. Which design correction most directly addresses this specific failure or requirement?

  1. Align a supported storage path MTU across NIC, switch, fabric and target before accepting jumbo-frame requirements.
  2. Configure the approved discovery portals and validate target identities and supported multipath sessions.
  3. Provide appropriate QoS class, bandwidth and buffer capacity for iSCSI without falsely treating it as FCoE priority traffic.
  4. Choose a supported MPIO policy consistent with target path priority and failover behavior rather than maximizing active sessions blindly.

Explanation

Correct Answer

B:

The relevant failure is: A host logs into one storage target portal and assumes all target interfaces will automatically be discovered for MPIO. The technical distinction is: iSCSI target discovery and session login specify available target portals; MPIO requires the initiator to establish supported sessions to eligible distinct paths. The targeted correction is: Configure the approved discovery portals and validate target identities and supported multipath sessions. Before changing the design, check two independent observations. List discovered IQNs and portal IP addresses Inspect actual logged-in sessions and physical egress per target path. Accept the change only if: The initiator sees all intended eligible storage paths without duplicate or unauthorized target logins.

Incorrect Answers

A:

This action targets iscsi jumbo mtu end-to-end, where the mechanism is: Ethernet MTU must be compatible end to end; enabling jumbo frames at endpoints does not change each transit interface or overlay overhead. That is a separate condition from the problem in this question: A host logs into one storage target portal and assumes all target interfaces will automatically be discovered for MPIO. Even a successful repair of the alternative would not establish the required result: The initiator sees all intended eligible storage paths without duplicate or unauthorized target logins. The applicable design change must address the diagnosed mechanism of the stated case, not the neighboring design problem.

C:

This action targets iscsi congestion isolation from backup, where the mechanism is: iSCSI uses IP transport and benefits from bandwidth, loss, queueing and failure-domain design separate from ordinary bulk traffic. That is a separate condition from the problem in this question: A host logs into one storage target portal and assumes all target interfaces will automatically be discovered for MPIO. Even a successful repair of the alternative would not establish the required result: The initiator sees all intended eligible storage paths without duplicate or unauthorized target logins. The applicable design change must address the diagnosed mechanism of the stated case, not the neighboring design problem.

D:

This action targets iscsi path policy active-active versus standby, where the mechanism is: MPIO load balancing and target asymmetric access states must match array ALUA or other vendor-specific path recommendations. That is a separate condition from the problem in this question: A host logs into one storage target portal and assumes all target interfaces will automatically be discovered for MPIO. Even a successful repair of the alternative would not establish the required result: The initiator sees all intended eligible storage paths without duplicate or unauthorized target logins. The applicable design change must address the diagnosed mechanism of the stated case, not the neighboring design problem.

Question 427

At a converged FCoE storage network, before changing the fabric, the team observes: A host logs into one storage target portal and assumes all target interfaces will automatically be discovered for MPIO. Acceptance requires evidence from the running system, not just the saved design. Which pair of observations most directly tests the proposed diagnosis before a change?

  1. Inspect each initiator source IP and route to its target portal; trace physical NIC utilization for simultaneous sessions.
  2. List discovered IQNs and portal IP addresses; inspect actual logged-in sessions and physical egress per target path.
  3. Trace both sessions through NICs, VLANs and switches; disconnect one approved path and observe I/O continuity and surviving throughput.
  4. Inspect negotiation and authentication failure logs without exposing secrets; validate login from the authorized initiator and rejection of an unauthorized test identity.

Explanation

Correct Answer

B:

The first observation is: List discovered IQNs and portal IP addresses The independent second observation is: Inspect actual logged-in sessions and physical egress per target path. Together they test the proposed diagnosis of this incident: A host logs into one storage target portal and assumes all target interfaces will automatically be discovered for MPIO. The underlying technical principle is: iSCSI target discovery and session login specify available target portals; MPIO requires the initiator to establish supported sessions to eligible distinct paths. If those checks confirm it, the appropriate next action is: Configure the approved discovery portals and validate target identities and supported multipath sessions. The expected measurable result is: The initiator sees all intended eligible storage paths without duplicate or unauthorized target logins.

Incorrect Answers

A:

These observations investigate iscsi multi-subnet addressing and mpio; they would be useful if the symptoms were: Two storage paths are configured on separate VLANs but the host's routing table sends both sessions through the same default gateway. That alternative rests on the principle: Intended multipathing depends on source interface and target portal routing; different logical VLAN labels alone do not guarantee independent transport paths. The question instead asks for evidence about: A host logs into one storage target portal and assumes all target interfaces will automatically be discovered for MPIO. The discriminating observations here are: List discovered IQNs and portal IP addresses Inspect actual logged-in sessions and physical egress per target path.

C:

These observations investigate iscsi independent fabric multipathing; they would be useful if the symptoms were: A virtualization host discovers two iSCSI targets but both sessions traverse one physical NIC and access switch. That alternative rests on the principle: Multipathing only protects against independent faults when initiator ports, transport paths and target access domains are genuinely diverse. The question instead asks for evidence about: A host logs into one storage target portal and assumes all target interfaces will automatically be discovered for MPIO. The discriminating observations here are: List discovered IQNs and portal IP addresses Inspect actual logged-in sessions and physical egress per target path.

D:

These observations investigate iscsi chap credential design; they would be useful if the symptoms were: An iSCSI initiator attempts to log in with stale CHAP credentials and the support team proposes disabling authentication on the target. That alternative rests on the principle: CHAP can authenticate iSCSI initiators or targets when configured consistently; bypassing it undermines storage access controls. The question instead asks for evidence about: A host logs into one storage target portal and assumes all target interfaces will automatically be discovered for MPIO. The discriminating observations here are: List discovered IQNs and portal IP addresses Inspect actual logged-in sessions and physical egress per target path.

Question 428

At a distributed AI checkpoint storage service, the data-center team needs to explain this behavior: A host logs into one storage target portal and assumes all target interfaces will automatically be discovered for MPIO. One component outage must remain inside the agreed availability budget. Which engineering principle best explains the observed behavior?

  1. iSCSI target discovery and session login specify available target portals; MPIO requires the initiator to establish supported sessions to eligible distinct paths.
  2. CHAP can authenticate iSCSI initiators or targets when configured consistently; bypassing it undermines storage access controls.
  3. Ethernet MTU must be compatible end to end; enabling jumbo frames at endpoints does not change each transit interface or overlay overhead.
  4. Multipathing only protects against independent faults when initiator ports, transport paths and target access domains are genuinely diverse.

Explanation

Correct Answer

A:

The controlling technical principle is: iSCSI target discovery and session login specify available target portals; MPIO requires the initiator to establish supported sessions to eligible distinct paths. This matters because the reported design failure is: A host logs into one storage target portal and assumes all target interfaces will automatically be discovered for MPIO. The first diagnostic check is: List discovered IQNs and portal IP addresses The independent check is: Inspect actual logged-in sessions and physical egress per target path. These facts support the targeted intervention: Configure the approved discovery portals and validate target identities and supported multipath sessions. Confirm that the resulting design meets this condition: The initiator sees all intended eligible storage paths without duplicate or unauthorized target logins.

Incorrect Answers

B:

The offered principle describes iscsi chap credential design: CHAP can authenticate iSCSI initiators or targets when configured consistently; bypassing it undermines storage access controls. That is useful for a distinct incident, such as: An iSCSI initiator attempts to log in with stale CHAP credentials and the support team proposes disabling authentication on the target. It does not account for the reported failure: A host logs into one storage target portal and assumes all target interfaces will automatically be discovered for MPIO. The governing principle in this situation is: iSCSI target discovery and session login specify available target portals; MPIO requires the initiator to establish supported sessions to eligible distinct paths.

C:

The offered principle describes iscsi jumbo mtu end-to-end: Ethernet MTU must be compatible end to end; enabling jumbo frames at endpoints does not change each transit interface or overlay overhead. That is useful for a distinct incident, such as: A storage operator enables 9000-byte MTU at the host and array but large iSCSI transfers fail on the intermediate switching path. It does not account for the reported failure: A host logs into one storage target portal and assumes all target interfaces will automatically be discovered for MPIO. The governing principle in this situation is: iSCSI target discovery and session login specify available target portals; MPIO requires the initiator to establish supported sessions to eligible distinct paths.

D:

The offered principle describes iscsi independent fabric multipathing: Multipathing only protects against independent faults when initiator ports, transport paths and target access domains are genuinely diverse. That is useful for a distinct incident, such as: A virtualization host discovers two iSCSI targets but both sessions traverse one physical NIC and access switch. It does not account for the reported failure: A host logs into one storage target portal and assumes all target interfaces will automatically be discovered for MPIO. The governing principle in this situation is: iSCSI target discovery and session login specify available target portals; MPIO requires the initiator to establish supported sessions to eligible distinct paths.

Question 429

At a high-IOPS virtualized storage farm, the team completed an authorized repair for: A host logs into one storage target portal and assumes all target interfaces will automatically be discovered for MPIO. The architect must preserve the intended failure domains. Which measured result most directly proves the original requirement is satisfied?

  1. Required iSCSI payload sizes traverse the fabric without size-specific blackholes.
  2. Only permitted initiators authenticate and gain mapped storage access.
  3. Block storage remains accessible when one initiator or fabric path fails.
  4. The initiator sees all intended eligible storage paths without duplicate or unauthorized target logins.

Explanation

Correct Answer

D:

The relevant measurable success criterion is: The initiator sees all intended eligible storage paths without duplicate or unauthorized target logins. It addresses the original reported defect: A host logs into one storage target portal and assumes all target interfaces will automatically be discovered for MPIO. A saved design or configuration command alone does not establish that outcome. Observe the affected system in two independent ways: List discovered IQNs and portal IP addresses Inspect actual logged-in sessions and physical egress per target path. The correction being evaluated is: Configure the approved discovery portals and validate target identities and supported multipath sessions. The underlying reason that correction matters is: iSCSI target discovery and session login specify available target portals; MPIO requires the initiator to establish supported sessions to eligible distinct paths.

Incorrect Answers

A:

This metric would help validate a correction to iscsi jumbo mtu end-to-end, rather than the original reported issue. The other issue is: A storage operator enables 9000-byte MTU at the host and array but large iSCSI transfers fail on the intermediate switching path. Here the defect to be resolved is: A host logs into one storage target portal and assumes all target interfaces will automatically be discovered for MPIO. The expected measurable outcome for the actual incident is: The initiator sees all intended eligible storage paths without duplicate or unauthorized target logins. A positive result for the other service would not prove this requirement is met.

B:

This metric would help validate a correction to iscsi chap credential design, rather than the original reported issue. The other issue is: An iSCSI initiator attempts to log in with stale CHAP credentials and the support team proposes disabling authentication on the target. Here the defect to be resolved is: A host logs into one storage target portal and assumes all target interfaces will automatically be discovered for MPIO. The expected measurable outcome for the actual incident is: The initiator sees all intended eligible storage paths without duplicate or unauthorized target logins. A positive result for the other service would not prove this requirement is met.

C:

This metric would help validate a correction to iscsi independent fabric multipathing, rather than the original reported issue. The other issue is: A virtualization host discovers two iSCSI targets but both sessions traverse one physical NIC and access switch. Here the defect to be resolved is: A host logs into one storage target portal and assumes all target interfaces will automatically be discovered for MPIO. The expected measurable outcome for the actual incident is: The initiator sees all intended eligible storage paths without duplicate or unauthorized target logins. A positive result for the other service would not prove this requirement is met.

Question 430

At a storage-replication data center, the architecture standards group considers the recurring risk: A host logs into one storage target portal and assumes all target interfaces will automatically be discovered for MPIO. The team needs a defensible design decision rather than a vendor feature checklist. Which continuing design control best prevents the same problem from recurring?

  1. Monitor congestion and update class mappings when new backup applications are added.
  2. Retest path diversity after host NIC, switch or array changes.
  3. Include transport MTU and encapsulation budget in storage acceptance tests.
  4. Maintain target portal inventory and discovery change checks.

Explanation

Correct Answer

D:

The most relevant ongoing safeguard is: Maintain target portal inventory and discovery change checks. The risk it addresses is: A host logs into one storage target portal and assumes all target interfaces will automatically be discovered for MPIO. This check is tied to the technical principle: iSCSI target discovery and session login specify available target portals; MPIO requires the initiator to establish supported sessions to eligible distinct paths. The immediate correction remains: Configure the approved discovery portals and validate target identities and supported multipath sessions. Periodically validate the safeguard through two different observations. List discovered IQNs and portal IP addresses Inspect actual logged-in sessions and physical egress per target path. The continuing acceptance target is: The initiator sees all intended eligible storage paths without duplicate or unauthorized target logins.

Incorrect Answers

A:

This is a continuing control for iscsi congestion isolation from backup; its underlying principle is: iSCSI uses IP transport and benefits from bandwidth, loss, queueing and failure-domain design separate from ordinary bulk traffic. The recurring risk here is different: A host logs into one storage target portal and assumes all target interfaces will automatically be discovered for MPIO. The appropriate ongoing control must prevent recurrence of that particular failure, not just the separate issue of: An iSCSI network shares a congested access queue with bulk VM backups and storage write latency spikes under backup load. The intended long-term acceptance condition remains: The initiator sees all intended eligible storage paths without duplicate or unauthorized target logins.

B:

This is a continuing control for iscsi independent fabric multipathing; its underlying principle is: Multipathing only protects against independent faults when initiator ports, transport paths and target access domains are genuinely diverse. The recurring risk here is different: A host logs into one storage target portal and assumes all target interfaces will automatically be discovered for MPIO. The appropriate ongoing control must prevent recurrence of that particular failure, not just the separate issue of: A virtualization host discovers two iSCSI targets but both sessions traverse one physical NIC and access switch. The intended long-term acceptance condition remains: The initiator sees all intended eligible storage paths without duplicate or unauthorized target logins.

C:

This is a continuing control for iscsi jumbo mtu end-to-end; its underlying principle is: Ethernet MTU must be compatible end to end; enabling jumbo frames at endpoints does not change each transit interface or overlay overhead. The recurring risk here is different: A host logs into one storage target portal and assumes all target interfaces will automatically be discovered for MPIO. The appropriate ongoing control must prevent recurrence of that particular failure, not just the separate issue of: A storage operator enables 9000-byte MTU at the host and array but large iSCSI transfers fail on the intermediate switching path. The intended long-term acceptance condition remains: The initiator sees all intended eligible storage paths without duplicate or unauthorized target logins.

Designing Cisco Data Center Infrastructure for Traditional and AI Workloads (300-610) Practice Tests