Cisco 300-610 Practice Test 39
Question 380
At a dual-fabric virtualization host estate, a post-incident design review focuses on preventing: An operator assumes a modular X-Series compute node can be replaced without application disruption simply because it is physically serviceable. The team needs a defensible design decision rather than a vendor feature checklist. Which continuing design control best prevents the same problem from recurring?
- Version templates and test hardware compatibility before full-scale rollout.
- Re-evaluate FI uplink expansion before adding data-heavy blades.
- Review application evacuation steps in chassis maintenance runbooks.
- Track actual energy and thermal utilization before increasing node density.
Explanation
Correct Answer
C:The most relevant ongoing safeguard is: Review application evacuation steps in chassis maintenance runbooks. The risk it addresses is: An operator assumes a modular X-Series compute node can be replaced without application disruption simply because it is physically serviceable. This check is tied to the technical principle: Hardware serviceability does not automatically provide application HA or preserved in-memory state. The immediate correction remains: Design application failover, workload evacuation and restore paths independently of chassis service procedures. Periodically validate the safeguard through two different observations. Inspect hypervisor or application live migration requirements Test workload continuity during planned removal of an eligible node. The continuing acceptance target is: Node maintenance meets the application recovery target without relying on mechanical hot-swap as HA.
Incorrect Answers
A:This is a continuing control for ucs x-series service-profile inheritance; its underlying principle is: Domain profiles, server profiles and adapter policy compatibility govern how X-Series resources are provisioned. The recurring risk here is different: An operator assumes a modular X-Series compute node can be replaced without application disruption simply because it is physically serviceable. The appropriate ongoing control must prevent recurrence of that particular failure, not just the separate issue of: An Intersight-managed X-Series policy template uses settings suited to a previous chassis generation and fails on a new node. The intended long-term acceptance condition remains: Node maintenance meets the application recovery target without relying on mechanical hot-swap as HA.
B:This is a continuing control for ucs x-series network oversubscription; its underlying principle is: Fabric module and FI uplink selection must account for compute workload traffic and oversubscription independently of blade CPU/GPU specification. The recurring risk here is different: An operator assumes a modular X-Series compute node can be replaced without application disruption simply because it is physically serviceable. The appropriate ongoing control must prevent recurrence of that particular failure, not just the separate issue of: X-Series blades require 100G-class east-west throughput but the selected FI uplink design provides only low aggregate uplink capacity. The intended long-term acceptance condition remains: Node maintenance meets the application recovery target without relying on mechanical hot-swap as HA.
D:This is a continuing control for ucs x-series rack power density; its underlying principle is: Physical rack units are not equivalent to electrical capacity; chassis population and accelerator power require realistic headroom. The recurring risk here is different: An operator assumes a modular X-Series compute node can be replaced without application disruption simply because it is physically serviceable. The appropriate ongoing control must prevent recurrence of that particular failure, not just the separate issue of: A dense X-Series deployment fits physically but exceeds rack and data-center power distribution under maximum workload. The intended long-term acceptance condition remains: Node maintenance meets the application recovery target without relying on mechanical hot-swap as HA.
Question 381
At a dual-fabric virtualization host estate, during a controlled design review, the team discovers: A GPU application spans several compute modules with heavy collective traffic but its design assumes in-chassis accelerator bandwidth extends transparently across racks. The maintenance plan must not disrupt unrelated tenants. Which design correction most directly addresses this specific failure or requirement?
- Clone or update supported Intersight server-profile templates after validating hardware-specific policy fields.
- Select a module and fabric placement model matched to measured intra- and inter-node collective behavior.
- Size rack PDUs, power supplies and cooling for supported fully loaded chassis scenarios.
- Select the appropriate X-Series chassis, fabric modules, adapters and GPU-capable modules from validated compatibility choices.
Explanation
Correct Answer
B:The relevant failure is: A GPU application spans several compute modules with heavy collective traffic but its design assumes in-chassis accelerator bandwidth extends transparently across racks. The technical distinction is: Intra-node accelerator communication and inter-node network traffic use different links and performance budgets. The targeted correction is: Select a module and fabric placement model matched to measured intra- and inter-node collective behavior. Before changing the design, check two independent observations. Profile GPU-to-GPU traffic locality Measure inter-node fabric latency and effective bisection bandwidth under collective load. Accept the change only if: Distributed compute meets synchronized training performance targets without hidden interconnect bottlenecks.
Incorrect Answers
A:This action targets ucs x-series service-profile inheritance, where the mechanism is: Domain profiles, server profiles and adapter policy compatibility govern how X-Series resources are provisioned. That is a separate condition from the problem in this question: A GPU application spans several compute modules with heavy collective traffic but its design assumes in-chassis accelerator bandwidth extends transparently across racks. Even a successful repair of the alternative would not establish the required result: Distributed compute meets synchronized training performance targets without hidden interconnect bottlenecks. The applicable design change must address the diagnosed mechanism of the stated case, not the neighboring design problem.
C:This action targets ucs x-series rack power density, where the mechanism is: Physical rack units are not equivalent to electrical capacity; chassis population and accelerator power require realistic headroom. That is a separate condition from the problem in this question: A GPU application spans several compute modules with heavy collective traffic but its design assumes in-chassis accelerator bandwidth extends transparently across racks. Even a successful repair of the alternative would not establish the required result: Distributed compute meets synchronized training performance targets without hidden interconnect bottlenecks. The applicable design change must address the diagnosed mechanism of the stated case, not the neighboring design problem.
D:This action targets ucs x-series compute and pcie scalability, where the mechanism is: UCS X-Series modular compute and optional PCIe expansion depend on compatible chassis, fabric modules, adapters and supported resource architecture. That is a separate condition from the problem in this question: A GPU application spans several compute modules with heavy collective traffic but its design assumes in-chassis accelerator bandwidth extends transparently across racks. Even a successful repair of the alternative would not establish the required result: Distributed compute meets synchronized training performance targets without hidden interconnect bottlenecks. The applicable design change must address the diagnosed mechanism of the stated case, not the neighboring design problem.
Question 382
At a Cisco UCS domain expansion, before changing the fabric, the team observes: A GPU application spans several compute modules with heavy collective traffic but its design assumes in-chassis accelerator bandwidth extends transparently across racks. Acceptance requires evidence from the running system, not just the saved design. Which pair of observations most directly tests the proposed diagnosis before a change?
- Estimate server east-west and north-south rates under concurrency; measure projected uplink saturation with one network path unavailable.
- Compare proposed GPU and PCIe node requirements to supported chassis topology; inspect fabric module and server generation compatibility guidance.
- Profile GPU-to-GPU traffic locality; measure inter-node fabric latency and effective bisection bandwidth under collective load.
- Compare intended version set against Cisco-supported interoperability matrix; validate one-node networking/storage paths after a staged upgrade.
Explanation
Correct Answer
C:The first observation is: Profile GPU-to-GPU traffic locality The independent second observation is: Measure inter-node fabric latency and effective bisection bandwidth under collective load. Together they test the proposed diagnosis of this incident: A GPU application spans several compute modules with heavy collective traffic but its design assumes in-chassis accelerator bandwidth extends transparently across racks. The underlying technical principle is: Intra-node accelerator communication and inter-node network traffic use different links and performance budgets. If those checks confirm it, the appropriate next action is: Select a module and fabric placement model matched to measured intra- and inter-node collective behavior. The expected measurable result is: Distributed compute meets synchronized training performance targets without hidden interconnect bottlenecks.
Incorrect Answers
A:These observations investigate ucs x-series network oversubscription; they would be useful if the symptoms were: X-Series blades require 100G-class east-west throughput but the selected FI uplink design provides only low aggregate uplink capacity. That alternative rests on the principle: Fabric module and FI uplink selection must account for compute workload traffic and oversubscription independently of blade CPU/GPU specification. The question instead asks for evidence about: A GPU application spans several compute modules with heavy collective traffic but its design assumes in-chassis accelerator bandwidth extends transparently across racks. The discriminating observations here are: Profile GPU-to-GPU traffic locality Measure inter-node fabric latency and effective bisection bandwidth under collective load.
B:These observations investigate ucs x-series compute and pcie scalability; they would be useful if the symptoms were: A UCS X-Series proposal adds accelerator-heavy nodes without validating chassis fabric and PCIe connectivity capabilities. That alternative rests on the principle: UCS X-Series modular compute and optional PCIe expansion depend on compatible chassis, fabric modules, adapters and supported resource architecture. The question instead asks for evidence about: A GPU application spans several compute modules with heavy collective traffic but its design assumes in-chassis accelerator bandwidth extends transparently across racks. The discriminating observations here are: Profile GPU-to-GPU traffic locality Measure inter-node fabric latency and effective bisection bandwidth under collective load.
D:These observations investigate ucs x-series firmware rollout constraints; they would be useful if the symptoms were: A mixed UCS X-Series and FI rollout upgrades chassis fabric modules and server firmware simultaneously without validating a supported interoperability matrix. That alternative rests on the principle: UCS domain components and server adapters require supported release combinations, even when each device is individually upgradeable. The question instead asks for evidence about: A GPU application spans several compute modules with heavy collective traffic but its design assumes in-chassis accelerator bandwidth extends transparently across racks. The discriminating observations here are: Profile GPU-to-GPU traffic locality Measure inter-node fabric latency and effective bisection bandwidth under collective load.
Question 383
At a modular X-Series compute design, the data-center team needs to explain this behavior: A GPU application spans several compute modules with heavy collective traffic but its design assumes in-chassis accelerator bandwidth extends transparently across racks. One component outage must remain inside the agreed availability budget. Which engineering principle best explains the observed behavior?
- Hardware serviceability does not automatically provide application HA or preserved in-memory state.
- Intra-node accelerator communication and inter-node network traffic use different links and performance budgets.
- Fabric module and FI uplink selection must account for compute workload traffic and oversubscription independently of blade CPU/GPU specification.
- UCS domain components and server adapters require supported release combinations, even when each device is individually upgradeable.
Explanation
Correct Answer
B:The controlling technical principle is: Intra-node accelerator communication and inter-node network traffic use different links and performance budgets. This matters because the reported design failure is: A GPU application spans several compute modules with heavy collective traffic but its design assumes in-chassis accelerator bandwidth extends transparently across racks. The first diagnostic check is: Profile GPU-to-GPU traffic locality The independent check is: Measure inter-node fabric latency and effective bisection bandwidth under collective load. These facts support the targeted intervention: Select a module and fabric placement model matched to measured intra- and inter-node collective behavior. Confirm that the resulting design meets this condition: Distributed compute meets synchronized training performance targets without hidden interconnect bottlenecks.
Incorrect Answers
A:The offered principle describes compute hot-swap versus application state: Hardware serviceability does not automatically provide application HA or preserved in-memory state. That is useful for a distinct incident, such as: An operator assumes a modular X-Series compute node can be replaced without application disruption simply because it is physically serviceable. It does not account for the reported failure: A GPU application spans several compute modules with heavy collective traffic but its design assumes in-chassis accelerator bandwidth extends transparently across racks. The governing principle in this situation is: Intra-node accelerator communication and inter-node network traffic use different links and performance budgets.
C:The offered principle describes ucs x-series network oversubscription: Fabric module and FI uplink selection must account for compute workload traffic and oversubscription independently of blade CPU/GPU specification. That is useful for a distinct incident, such as: X-Series blades require 100G-class east-west throughput but the selected FI uplink design provides only low aggregate uplink capacity. It does not account for the reported failure: A GPU application spans several compute modules with heavy collective traffic but its design assumes in-chassis accelerator bandwidth extends transparently across racks. The governing principle in this situation is: Intra-node accelerator communication and inter-node network traffic use different links and performance budgets.
D:The offered principle describes ucs x-series firmware rollout constraints: UCS domain components and server adapters require supported release combinations, even when each device is individually upgradeable. That is useful for a distinct incident, such as: A mixed UCS X-Series and FI rollout upgrades chassis fabric modules and server firmware simultaneously without validating a supported interoperability matrix. It does not account for the reported failure: A GPU application spans several compute modules with heavy collective traffic but its design assumes in-chassis accelerator bandwidth extends transparently across racks. The governing principle in this situation is: Intra-node accelerator communication and inter-node network traffic use different links and performance budgets.
Question 384
At a mission-critical UCS blade installation, the team completed an authorized repair for: A GPU application spans several compute modules with heavy collective traffic but its design assumes in-chassis accelerator bandwidth extends transparently across racks. The architect must preserve the intended failure domains. Which measured result most directly proves the original requirement is satisfied?
- Distributed compute meets synchronized training performance targets without hidden interconnect bottlenecks.
- Node maintenance meets the application recovery target without relying on mechanical hot-swap as HA.
- The chosen chassis supports the workload's required compute, I/O and accelerator connectivity.
- Full planned compute population operates within redundant power and thermal envelopes.
Explanation
Correct Answer
A:The relevant measurable success criterion is: Distributed compute meets synchronized training performance targets without hidden interconnect bottlenecks. It addresses the original reported defect: A GPU application spans several compute modules with heavy collective traffic but its design assumes in-chassis accelerator bandwidth extends transparently across racks. A saved design or configuration command alone does not establish that outcome. Observe the affected system in two independent ways: Profile GPU-to-GPU traffic locality Measure inter-node fabric latency and effective bisection bandwidth under collective load. The correction being evaluated is: Select a module and fabric placement model matched to measured intra- and inter-node collective behavior. The underlying reason that correction matters is: Intra-node accelerator communication and inter-node network traffic use different links and performance budgets.
Incorrect Answers
B:This metric would help validate a correction to compute hot-swap versus application state, rather than the original reported issue. The other issue is: An operator assumes a modular X-Series compute node can be replaced without application disruption simply because it is physically serviceable. Here the defect to be resolved is: A GPU application spans several compute modules with heavy collective traffic but its design assumes in-chassis accelerator bandwidth extends transparently across racks. The expected measurable outcome for the actual incident is: Distributed compute meets synchronized training performance targets without hidden interconnect bottlenecks. A positive result for the other service would not prove this requirement is met.
C:This metric would help validate a correction to ucs x-series compute and pcie scalability, rather than the original reported issue. The other issue is: A UCS X-Series proposal adds accelerator-heavy nodes without validating chassis fabric and PCIe connectivity capabilities. Here the defect to be resolved is: A GPU application spans several compute modules with heavy collective traffic but its design assumes in-chassis accelerator bandwidth extends transparently across racks. The expected measurable outcome for the actual incident is: Distributed compute meets synchronized training performance targets without hidden interconnect bottlenecks. A positive result for the other service would not prove this requirement is met.
D:This metric would help validate a correction to ucs x-series rack power density, rather than the original reported issue. The other issue is: A dense X-Series deployment fits physically but exceeds rack and data-center power distribution under maximum workload. Here the defect to be resolved is: A GPU application spans several compute modules with heavy collective traffic but its design assumes in-chassis accelerator bandwidth extends transparently across racks. The expected measurable outcome for the actual incident is: Distributed compute meets synchronized training performance targets without hidden interconnect bottlenecks. A positive result for the other service would not prove this requirement is met.
Question 385
At an Intersight-managed UCS cluster, the architecture standards group considers the recurring risk: A GPU application spans several compute modules with heavy collective traffic but its design assumes in-chassis accelerator bandwidth extends transparently across racks. The team needs a defensible design decision rather than a vendor feature checklist. Which continuing design control best prevents the same problem from recurring?
- Track actual energy and thermal utilization before increasing node density.
- Rebalance compute placement when workload parallelism or GPU distribution changes.
- Requalify modules when new PCIe accelerator generations arrive.
- Re-evaluate FI uplink expansion before adding data-heavy blades.
Explanation
Correct Answer
B:The most relevant ongoing safeguard is: Rebalance compute placement when workload parallelism or GPU distribution changes. The risk it addresses is: A GPU application spans several compute modules with heavy collective traffic but its design assumes in-chassis accelerator bandwidth extends transparently across racks. This check is tied to the technical principle: Intra-node accelerator communication and inter-node network traffic use different links and performance budgets. The immediate correction remains: Select a module and fabric placement model matched to measured intra- and inter-node collective behavior. Periodically validate the safeguard through two different observations. Profile GPU-to-GPU traffic locality Measure inter-node fabric latency and effective bisection bandwidth under collective load. The continuing acceptance target is: Distributed compute meets synchronized training performance targets without hidden interconnect bottlenecks.
Incorrect Answers
A:This is a continuing control for ucs x-series rack power density; its underlying principle is: Physical rack units are not equivalent to electrical capacity; chassis population and accelerator power require realistic headroom. The recurring risk here is different: A GPU application spans several compute modules with heavy collective traffic but its design assumes in-chassis accelerator bandwidth extends transparently across racks. The appropriate ongoing control must prevent recurrence of that particular failure, not just the separate issue of: A dense X-Series deployment fits physically but exceeds rack and data-center power distribution under maximum workload. The intended long-term acceptance condition remains: Distributed compute meets synchronized training performance targets without hidden interconnect bottlenecks.
C:This is a continuing control for ucs x-series compute and pcie scalability; its underlying principle is: UCS X-Series modular compute and optional PCIe expansion depend on compatible chassis, fabric modules, adapters and supported resource architecture. The recurring risk here is different: A GPU application spans several compute modules with heavy collective traffic but its design assumes in-chassis accelerator bandwidth extends transparently across racks. The appropriate ongoing control must prevent recurrence of that particular failure, not just the separate issue of: A UCS X-Series proposal adds accelerator-heavy nodes without validating chassis fabric and PCIe connectivity capabilities. The intended long-term acceptance condition remains: Distributed compute meets synchronized training performance targets without hidden interconnect bottlenecks.
D:This is a continuing control for ucs x-series network oversubscription; its underlying principle is: Fabric module and FI uplink selection must account for compute workload traffic and oversubscription independently of blade CPU/GPU specification. The recurring risk here is different: A GPU application spans several compute modules with heavy collective traffic but its design assumes in-chassis accelerator bandwidth extends transparently across racks. The appropriate ongoing control must prevent recurrence of that particular failure, not just the separate issue of: X-Series blades require 100G-class east-west throughput but the selected FI uplink design provides only low aggregate uplink capacity. The intended long-term acceptance condition remains: Distributed compute meets synchronized training performance targets without hidden interconnect bottlenecks.
Question 386
At an Intersight-managed UCS cluster, a proposed deployment has this failure mode: A mixed UCS X-Series and FI rollout upgrades chassis fabric modules and server firmware simultaneously without validating a supported interoperability matrix. The maintenance plan must not disrupt unrelated tenants. Which design correction most directly addresses this specific failure or requirement?
- Stage the supported integrated release and approved upgrade order with a rollback plan and representative test node.
- Size rack PDUs, power supplies and cooling for supported fully loaded chassis scenarios.
- Design application failover, workload evacuation and restore paths independently of chassis service procedures.
- Select the appropriate X-Series chassis, fabric modules, adapters and GPU-capable modules from validated compatibility choices.
Explanation
Correct Answer
A:The relevant failure is: A mixed UCS X-Series and FI rollout upgrades chassis fabric modules and server firmware simultaneously without validating a supported interoperability matrix. The technical distinction is: UCS domain components and server adapters require supported release combinations, even when each device is individually upgradeable. The targeted correction is: Stage the supported integrated release and approved upgrade order with a rollback plan and representative test node. Before changing the design, check two independent observations. Compare intended version set against Cisco-supported interoperability matrix Validate one-node networking/storage paths after a staged upgrade. Accept the change only if: All components run compatible software with retained data and SAN reachability.
Incorrect Answers
B:This action targets ucs x-series rack power density, where the mechanism is: Physical rack units are not equivalent to electrical capacity; chassis population and accelerator power require realistic headroom. That is a separate condition from the problem in this question: A mixed UCS X-Series and FI rollout upgrades chassis fabric modules and server firmware simultaneously without validating a supported interoperability matrix. Even a successful repair of the alternative would not establish the required result: All components run compatible software with retained data and SAN reachability. The applicable design change must address the diagnosed mechanism of the stated case, not the neighboring design problem.
C:This action targets compute hot-swap versus application state, where the mechanism is: Hardware serviceability does not automatically provide application HA or preserved in-memory state. That is a separate condition from the problem in this question: A mixed UCS X-Series and FI rollout upgrades chassis fabric modules and server firmware simultaneously without validating a supported interoperability matrix. Even a successful repair of the alternative would not establish the required result: All components run compatible software with retained data and SAN reachability. The applicable design change must address the diagnosed mechanism of the stated case, not the neighboring design problem.
D:This action targets ucs x-series compute and pcie scalability, where the mechanism is: UCS X-Series modular compute and optional PCIe expansion depend on compatible chassis, fabric modules, adapters and supported resource architecture. That is a separate condition from the problem in this question: A mixed UCS X-Series and FI rollout upgrades chassis fabric modules and server firmware simultaneously without validating a supported interoperability matrix. Even a successful repair of the alternative would not establish the required result: All components run compatible software with retained data and SAN reachability. The applicable design change must address the diagnosed mechanism of the stated case, not the neighboring design problem.
Question 387
At a dual-fabric virtualization host estate, the cause remains unconfirmed for this reported issue: A mixed UCS X-Series and FI rollout upgrades chassis fabric modules and server firmware simultaneously without validating a supported interoperability matrix. Acceptance requires evidence from the running system, not just the saved design. Which pair of observations most directly tests the proposed diagnosis before a change?
- Compare intended version set against Cisco-supported interoperability matrix; validate one-node networking/storage paths after a staged upgrade.
- Profile GPU-to-GPU traffic locality; measure inter-node fabric latency and effective bisection bandwidth under collective load.
- Calculate chassis peak and redundancy power feeds; validate rack thermal and inlet specifications at projected load.
- Estimate server east-west and north-south rates under concurrency; measure projected uplink saturation with one network path unavailable.
Explanation
Correct Answer
A:The first observation is: Compare intended version set against Cisco-supported interoperability matrix The independent second observation is: Validate one-node networking/storage paths after a staged upgrade. Together they test the proposed diagnosis of this incident: A mixed UCS X-Series and FI rollout upgrades chassis fabric modules and server firmware simultaneously without validating a supported interoperability matrix. The underlying technical principle is: UCS domain components and server adapters require supported release combinations, even when each device is individually upgradeable. If those checks confirm it, the appropriate next action is: Stage the supported integrated release and approved upgrade order with a rollback plan and representative test node. The expected measurable result is: All components run compatible software with retained data and SAN reachability.
Incorrect Answers
B:These observations investigate ucs x-series high-speed gpu workload locality; they would be useful if the symptoms were: A GPU application spans several compute modules with heavy collective traffic but its design assumes in-chassis accelerator bandwidth extends transparently across racks. That alternative rests on the principle: Intra-node accelerator communication and inter-node network traffic use different links and performance budgets. The question instead asks for evidence about: A mixed UCS X-Series and FI rollout upgrades chassis fabric modules and server firmware simultaneously without validating a supported interoperability matrix. The discriminating observations here are: Compare intended version set against Cisco-supported interoperability matrix Validate one-node networking/storage paths after a staged upgrade.
C:These observations investigate ucs x-series rack power density; they would be useful if the symptoms were: A dense X-Series deployment fits physically but exceeds rack and data-center power distribution under maximum workload. That alternative rests on the principle: Physical rack units are not equivalent to electrical capacity; chassis population and accelerator power require realistic headroom. The question instead asks for evidence about: A mixed UCS X-Series and FI rollout upgrades chassis fabric modules and server firmware simultaneously without validating a supported interoperability matrix. The discriminating observations here are: Compare intended version set against Cisco-supported interoperability matrix Validate one-node networking/storage paths after a staged upgrade.
D:These observations investigate ucs x-series network oversubscription; they would be useful if the symptoms were: X-Series blades require 100G-class east-west throughput but the selected FI uplink design provides only low aggregate uplink capacity. That alternative rests on the principle: Fabric module and FI uplink selection must account for compute workload traffic and oversubscription independently of blade CPU/GPU specification. The question instead asks for evidence about: A mixed UCS X-Series and FI rollout upgrades chassis fabric modules and server firmware simultaneously without validating a supported interoperability matrix. The discriminating observations here are: Compare intended version set against Cisco-supported interoperability matrix Validate one-node networking/storage paths after a staged upgrade.
Question 388
At a Cisco UCS domain expansion, a failure review must identify the central technical cause of: A mixed UCS X-Series and FI rollout upgrades chassis fabric modules and server firmware simultaneously without validating a supported interoperability matrix. One component outage must remain inside the agreed availability budget. Which engineering principle best explains the observed behavior?
- Physical rack units are not equivalent to electrical capacity; chassis population and accelerator power require realistic headroom.
- UCS domain components and server adapters require supported release combinations, even when each device is individually upgradeable.
- Domain profiles, server profiles and adapter policy compatibility govern how X-Series resources are provisioned.
- Hardware serviceability does not automatically provide application HA or preserved in-memory state.
Explanation
Correct Answer
B:The controlling technical principle is: UCS domain components and server adapters require supported release combinations, even when each device is individually upgradeable. This matters because the reported design failure is: A mixed UCS X-Series and FI rollout upgrades chassis fabric modules and server firmware simultaneously without validating a supported interoperability matrix. The first diagnostic check is: Compare intended version set against Cisco-supported interoperability matrix The independent check is: Validate one-node networking/storage paths after a staged upgrade. These facts support the targeted intervention: Stage the supported integrated release and approved upgrade order with a rollback plan and representative test node. Confirm that the resulting design meets this condition: All components run compatible software with retained data and SAN reachability.
Incorrect Answers
A:The offered principle describes ucs x-series rack power density: Physical rack units are not equivalent to electrical capacity; chassis population and accelerator power require realistic headroom. That is useful for a distinct incident, such as: A dense X-Series deployment fits physically but exceeds rack and data-center power distribution under maximum workload. It does not account for the reported failure: A mixed UCS X-Series and FI rollout upgrades chassis fabric modules and server firmware simultaneously without validating a supported interoperability matrix. The governing principle in this situation is: UCS domain components and server adapters require supported release combinations, even when each device is individually upgradeable.
C:The offered principle describes ucs x-series service-profile inheritance: Domain profiles, server profiles and adapter policy compatibility govern how X-Series resources are provisioned. That is useful for a distinct incident, such as: An Intersight-managed X-Series policy template uses settings suited to a previous chassis generation and fails on a new node. It does not account for the reported failure: A mixed UCS X-Series and FI rollout upgrades chassis fabric modules and server firmware simultaneously without validating a supported interoperability matrix. The governing principle in this situation is: UCS domain components and server adapters require supported release combinations, even when each device is individually upgradeable.
D:The offered principle describes compute hot-swap versus application state: Hardware serviceability does not automatically provide application HA or preserved in-memory state. That is useful for a distinct incident, such as: An operator assumes a modular X-Series compute node can be replaced without application disruption simply because it is physically serviceable. It does not account for the reported failure: A mixed UCS X-Series and FI rollout upgrades chassis fabric modules and server firmware simultaneously without validating a supported interoperability matrix. The governing principle in this situation is: UCS domain components and server adapters require supported release combinations, even when each device is individually upgradeable.
Question 389
At a modular X-Series compute design, the service owner needs evidence of resolution for: A mixed UCS X-Series and FI rollout upgrades chassis fabric modules and server firmware simultaneously without validating a supported interoperability matrix. The architect must preserve the intended failure domains. Which measured result most directly proves the original requirement is satisfied?
- The chosen chassis supports the workload's required compute, I/O and accelerator connectivity.
- Compute nodes receive the design throughput in both normal and expected degraded operation.
- All components run compatible software with retained data and SAN reachability.
- New X-Series nodes associate successfully without disruptive fleet-wide policy changes.
Explanation
Correct Answer
C:The relevant measurable success criterion is: All components run compatible software with retained data and SAN reachability. It addresses the original reported defect: A mixed UCS X-Series and FI rollout upgrades chassis fabric modules and server firmware simultaneously without validating a supported interoperability matrix. A saved design or configuration command alone does not establish that outcome. Observe the affected system in two independent ways: Compare intended version set against Cisco-supported interoperability matrix Validate one-node networking/storage paths after a staged upgrade. The correction being evaluated is: Stage the supported integrated release and approved upgrade order with a rollback plan and representative test node. The underlying reason that correction matters is: UCS domain components and server adapters require supported release combinations, even when each device is individually upgradeable.
Incorrect Answers
A:This metric would help validate a correction to ucs x-series compute and pcie scalability, rather than the original reported issue. The other issue is: A UCS X-Series proposal adds accelerator-heavy nodes without validating chassis fabric and PCIe connectivity capabilities. Here the defect to be resolved is: A mixed UCS X-Series and FI rollout upgrades chassis fabric modules and server firmware simultaneously without validating a supported interoperability matrix. The expected measurable outcome for the actual incident is: All components run compatible software with retained data and SAN reachability. A positive result for the other service would not prove this requirement is met.
B:This metric would help validate a correction to ucs x-series network oversubscription, rather than the original reported issue. The other issue is: X-Series blades require 100G-class east-west throughput but the selected FI uplink design provides only low aggregate uplink capacity. Here the defect to be resolved is: A mixed UCS X-Series and FI rollout upgrades chassis fabric modules and server firmware simultaneously without validating a supported interoperability matrix. The expected measurable outcome for the actual incident is: All components run compatible software with retained data and SAN reachability. A positive result for the other service would not prove this requirement is met.
D:This metric would help validate a correction to ucs x-series service-profile inheritance, rather than the original reported issue. The other issue is: An Intersight-managed X-Series policy template uses settings suited to a previous chassis generation and fails on a new node. Here the defect to be resolved is: A mixed UCS X-Series and FI rollout upgrades chassis fabric modules and server firmware simultaneously without validating a supported interoperability matrix. The expected measurable outcome for the actual incident is: All components run compatible software with retained data and SAN reachability. A positive result for the other service would not prove this requirement is met.
Question 390
At a mission-critical UCS blade installation, after correction, the team wants to prevent recurrence of: A mixed UCS X-Series and FI rollout upgrades chassis fabric modules and server firmware simultaneously without validating a supported interoperability matrix. The team needs a defensible design decision rather than a vendor feature checklist. Which continuing design control best prevents the same problem from recurring?
- Track integrated release qualification before approving future changes.
- Requalify modules when new PCIe accelerator generations arrive.
- Re-evaluate FI uplink expansion before adding data-heavy blades.
- Review application evacuation steps in chassis maintenance runbooks.
Explanation
Correct Answer
A:The most relevant ongoing safeguard is: Track integrated release qualification before approving future changes. The risk it addresses is: A mixed UCS X-Series and FI rollout upgrades chassis fabric modules and server firmware simultaneously without validating a supported interoperability matrix. This check is tied to the technical principle: UCS domain components and server adapters require supported release combinations, even when each device is individually upgradeable. The immediate correction remains: Stage the supported integrated release and approved upgrade order with a rollback plan and representative test node. Periodically validate the safeguard through two different observations. Compare intended version set against Cisco-supported interoperability matrix Validate one-node networking/storage paths after a staged upgrade. The continuing acceptance target is: All components run compatible software with retained data and SAN reachability.
Incorrect Answers
B:This is a continuing control for ucs x-series compute and pcie scalability; its underlying principle is: UCS X-Series modular compute and optional PCIe expansion depend on compatible chassis, fabric modules, adapters and supported resource architecture. The recurring risk here is different: A mixed UCS X-Series and FI rollout upgrades chassis fabric modules and server firmware simultaneously without validating a supported interoperability matrix. The appropriate ongoing control must prevent recurrence of that particular failure, not just the separate issue of: A UCS X-Series proposal adds accelerator-heavy nodes without validating chassis fabric and PCIe connectivity capabilities. The intended long-term acceptance condition remains: All components run compatible software with retained data and SAN reachability.
C:This is a continuing control for ucs x-series network oversubscription; its underlying principle is: Fabric module and FI uplink selection must account for compute workload traffic and oversubscription independently of blade CPU/GPU specification. The recurring risk here is different: A mixed UCS X-Series and FI rollout upgrades chassis fabric modules and server firmware simultaneously without validating a supported interoperability matrix. The appropriate ongoing control must prevent recurrence of that particular failure, not just the separate issue of: X-Series blades require 100G-class east-west throughput but the selected FI uplink design provides only low aggregate uplink capacity. The intended long-term acceptance condition remains: All components run compatible software with retained data and SAN reachability.
D:This is a continuing control for compute hot-swap versus application state; its underlying principle is: Hardware serviceability does not automatically provide application HA or preserved in-memory state. The recurring risk here is different: A mixed UCS X-Series and FI rollout upgrades chassis fabric modules and server firmware simultaneously without validating a supported interoperability matrix. The appropriate ongoing control must prevent recurrence of that particular failure, not just the separate issue of: An operator assumes a modular X-Series compute node can be replaced without application disruption simply because it is physically serviceable. The intended long-term acceptance condition remains: All components run compatible software with retained data and SAN reachability.