Cisco 300-610 Practice Test 37
Question 360
At an Intersight-managed UCS cluster, after correction, the team wants to prevent recurrence of: A UCS X-Series proposal adds accelerator-heavy nodes without validating chassis fabric and PCIe connectivity capabilities. The team needs a defensible design decision rather than a vendor feature checklist. Which continuing design control best prevents the same problem from recurring?
- Requalify modules when new PCIe accelerator generations arrive.
- Version templates and test hardware compatibility before full-scale rollout.
- Track actual energy and thermal utilization before increasing node density.
- Rebalance compute placement when workload parallelism or GPU distribution changes.
Explanation
Correct Answer
A:The most relevant ongoing safeguard is: Requalify modules when new PCIe accelerator generations arrive. The risk it addresses is: A UCS X-Series proposal adds accelerator-heavy nodes without validating chassis fabric and PCIe connectivity capabilities. This check is tied to the technical principle: UCS X-Series modular compute and optional PCIe expansion depend on compatible chassis, fabric modules, adapters and supported resource architecture. The immediate correction remains: Select the appropriate X-Series chassis, fabric modules, adapters and GPU-capable modules from validated compatibility choices. Periodically validate the safeguard through two different observations. Compare proposed GPU and PCIe node requirements to supported chassis topology Inspect fabric module and server generation compatibility guidance. The continuing acceptance target is: The chosen chassis supports the workload's required compute, I/O and accelerator connectivity.
Incorrect Answers
B:This is a continuing control for ucs x-series service-profile inheritance; its underlying principle is: Domain profiles, server profiles and adapter policy compatibility govern how X-Series resources are provisioned. The recurring risk here is different: A UCS X-Series proposal adds accelerator-heavy nodes without validating chassis fabric and PCIe connectivity capabilities. The appropriate ongoing control must prevent recurrence of that particular failure, not just the separate issue of: An Intersight-managed X-Series policy template uses settings suited to a previous chassis generation and fails on a new node. The intended long-term acceptance condition remains: The chosen chassis supports the workload's required compute, I/O and accelerator connectivity.
C:This is a continuing control for ucs x-series rack power density; its underlying principle is: Physical rack units are not equivalent to electrical capacity; chassis population and accelerator power require realistic headroom. The recurring risk here is different: A UCS X-Series proposal adds accelerator-heavy nodes without validating chassis fabric and PCIe connectivity capabilities. The appropriate ongoing control must prevent recurrence of that particular failure, not just the separate issue of: A dense X-Series deployment fits physically but exceeds rack and data-center power distribution under maximum workload. The intended long-term acceptance condition remains: The chosen chassis supports the workload's required compute, I/O and accelerator connectivity.
D:This is a continuing control for ucs x-series high-speed gpu workload locality; its underlying principle is: Intra-node accelerator communication and inter-node network traffic use different links and performance budgets. The recurring risk here is different: A UCS X-Series proposal adds accelerator-heavy nodes without validating chassis fabric and PCIe connectivity capabilities. The appropriate ongoing control must prevent recurrence of that particular failure, not just the separate issue of: A GPU application spans several compute modules with heavy collective traffic but its design assumes in-chassis accelerator bandwidth extends transparently across racks. The intended long-term acceptance condition remains: The chosen chassis supports the workload's required compute, I/O and accelerator connectivity.
Question 361
At an Intersight-managed UCS cluster, a design review reports the following issue: A dense X-Series deployment fits physically but exceeds rack and data-center power distribution under maximum workload. The maintenance plan must not disrupt unrelated tenants. Which design correction most directly addresses this specific failure or requirement?
- Plan appropriate fabric module, FI and upstream bandwidth based on workload traffic measurements.
- Size rack PDUs, power supplies and cooling for supported fully loaded chassis scenarios.
- Clone or update supported Intersight server-profile templates after validating hardware-specific policy fields.
- Select a module and fabric placement model matched to measured intra- and inter-node collective behavior.
Explanation
Correct Answer
B:The relevant failure is: A dense X-Series deployment fits physically but exceeds rack and data-center power distribution under maximum workload. The technical distinction is: Physical rack units are not equivalent to electrical capacity; chassis population and accelerator power require realistic headroom. The targeted correction is: Size rack PDUs, power supplies and cooling for supported fully loaded chassis scenarios. Before changing the design, check two independent observations. Calculate chassis peak and redundancy power feeds Validate rack thermal and inlet specifications at projected load. Accept the change only if: Full planned compute population operates within redundant power and thermal envelopes.
Incorrect Answers
A:This action targets ucs x-series network oversubscription, where the mechanism is: Fabric module and FI uplink selection must account for compute workload traffic and oversubscription independently of blade CPU/GPU specification. That is a separate condition from the problem in this question: A dense X-Series deployment fits physically but exceeds rack and data-center power distribution under maximum workload. Even a successful repair of the alternative would not establish the required result: Full planned compute population operates within redundant power and thermal envelopes. The applicable design change must address the diagnosed mechanism of the stated case, not the neighboring design problem.
C:This action targets ucs x-series service-profile inheritance, where the mechanism is: Domain profiles, server profiles and adapter policy compatibility govern how X-Series resources are provisioned. That is a separate condition from the problem in this question: A dense X-Series deployment fits physically but exceeds rack and data-center power distribution under maximum workload. Even a successful repair of the alternative would not establish the required result: Full planned compute population operates within redundant power and thermal envelopes. The applicable design change must address the diagnosed mechanism of the stated case, not the neighboring design problem.
D:This action targets ucs x-series high-speed gpu workload locality, where the mechanism is: Intra-node accelerator communication and inter-node network traffic use different links and performance budgets. That is a separate condition from the problem in this question: A dense X-Series deployment fits physically but exceeds rack and data-center power distribution under maximum workload. Even a successful repair of the alternative would not establish the required result: Full planned compute population operates within redundant power and thermal envelopes. The applicable design change must address the diagnosed mechanism of the stated case, not the neighboring design problem.
Question 362
At a dual-fabric virtualization host estate, two engineers propose competing diagnoses for this condition: A dense X-Series deployment fits physically but exceeds rack and data-center power distribution under maximum workload. Acceptance requires evidence from the running system, not just the saved design. Which pair of observations most directly tests the proposed diagnosis before a change?
- Profile GPU-to-GPU traffic locality; measure inter-node fabric latency and effective bisection bandwidth under collective load.
- Calculate chassis peak and redundancy power feeds; validate rack thermal and inlet specifications at projected load.
- Compare proposed GPU and PCIe node requirements to supported chassis topology; inspect fabric module and server generation compatibility guidance.
- Compare discovered server inventory against effective profile constraints; dry-run or stage profile deployment on one eligible node.
Explanation
Correct Answer
B:The first observation is: Calculate chassis peak and redundancy power feeds The independent second observation is: Validate rack thermal and inlet specifications at projected load. Together they test the proposed diagnosis of this incident: A dense X-Series deployment fits physically but exceeds rack and data-center power distribution under maximum workload. The underlying technical principle is: Physical rack units are not equivalent to electrical capacity; chassis population and accelerator power require realistic headroom. If those checks confirm it, the appropriate next action is: Size rack PDUs, power supplies and cooling for supported fully loaded chassis scenarios. The expected measurable result is: Full planned compute population operates within redundant power and thermal envelopes.
Incorrect Answers
A:These observations investigate ucs x-series high-speed gpu workload locality; they would be useful if the symptoms were: A GPU application spans several compute modules with heavy collective traffic but its design assumes in-chassis accelerator bandwidth extends transparently across racks. That alternative rests on the principle: Intra-node accelerator communication and inter-node network traffic use different links and performance budgets. The question instead asks for evidence about: A dense X-Series deployment fits physically but exceeds rack and data-center power distribution under maximum workload. The discriminating observations here are: Calculate chassis peak and redundancy power feeds Validate rack thermal and inlet specifications at projected load.
C:These observations investigate ucs x-series compute and pcie scalability; they would be useful if the symptoms were: A UCS X-Series proposal adds accelerator-heavy nodes without validating chassis fabric and PCIe connectivity capabilities. That alternative rests on the principle: UCS X-Series modular compute and optional PCIe expansion depend on compatible chassis, fabric modules, adapters and supported resource architecture. The question instead asks for evidence about: A dense X-Series deployment fits physically but exceeds rack and data-center power distribution under maximum workload. The discriminating observations here are: Calculate chassis peak and redundancy power feeds Validate rack thermal and inlet specifications at projected load.
D:These observations investigate ucs x-series service-profile inheritance; they would be useful if the symptoms were: An Intersight-managed X-Series policy template uses settings suited to a previous chassis generation and fails on a new node. That alternative rests on the principle: Domain profiles, server profiles and adapter policy compatibility govern how X-Series resources are provisioned. The question instead asks for evidence about: A dense X-Series deployment fits physically but exceeds rack and data-center power distribution under maximum workload. The discriminating observations here are: Calculate chassis peak and redundancy power feeds Validate rack thermal and inlet specifications at projected load.
Question 363
At a Cisco UCS domain expansion, the design group challenges an assumption behind this issue: A dense X-Series deployment fits physically but exceeds rack and data-center power distribution under maximum workload. One component outage must remain inside the agreed availability budget. Which engineering principle best explains the observed behavior?
- Hardware serviceability does not automatically provide application HA or preserved in-memory state.
- UCS domain components and server adapters require supported release combinations, even when each device is individually upgradeable.
- Intra-node accelerator communication and inter-node network traffic use different links and performance budgets.
- Physical rack units are not equivalent to electrical capacity; chassis population and accelerator power require realistic headroom.
Explanation
Correct Answer
D:The controlling technical principle is: Physical rack units are not equivalent to electrical capacity; chassis population and accelerator power require realistic headroom. This matters because the reported design failure is: A dense X-Series deployment fits physically but exceeds rack and data-center power distribution under maximum workload. The first diagnostic check is: Calculate chassis peak and redundancy power feeds The independent check is: Validate rack thermal and inlet specifications at projected load. These facts support the targeted intervention: Size rack PDUs, power supplies and cooling for supported fully loaded chassis scenarios. Confirm that the resulting design meets this condition: Full planned compute population operates within redundant power and thermal envelopes.
Incorrect Answers
A:The offered principle describes compute hot-swap versus application state: Hardware serviceability does not automatically provide application HA or preserved in-memory state. That is useful for a distinct incident, such as: An operator assumes a modular X-Series compute node can be replaced without application disruption simply because it is physically serviceable. It does not account for the reported failure: A dense X-Series deployment fits physically but exceeds rack and data-center power distribution under maximum workload. The governing principle in this situation is: Physical rack units are not equivalent to electrical capacity; chassis population and accelerator power require realistic headroom.
B:The offered principle describes ucs x-series firmware rollout constraints: UCS domain components and server adapters require supported release combinations, even when each device is individually upgradeable. That is useful for a distinct incident, such as: A mixed UCS X-Series and FI rollout upgrades chassis fabric modules and server firmware simultaneously without validating a supported interoperability matrix. It does not account for the reported failure: A dense X-Series deployment fits physically but exceeds rack and data-center power distribution under maximum workload. The governing principle in this situation is: Physical rack units are not equivalent to electrical capacity; chassis population and accelerator power require realistic headroom.
C:The offered principle describes ucs x-series high-speed gpu workload locality: Intra-node accelerator communication and inter-node network traffic use different links and performance budgets. That is useful for a distinct incident, such as: A GPU application spans several compute modules with heavy collective traffic but its design assumes in-chassis accelerator bandwidth extends transparently across racks. It does not account for the reported failure: A dense X-Series deployment fits physically but exceeds rack and data-center power distribution under maximum workload. The governing principle in this situation is: Physical rack units are not equivalent to electrical capacity; chassis population and accelerator power require realistic headroom.
Question 364
At a modular X-Series compute design, a change has been proposed for the following condition: A dense X-Series deployment fits physically but exceeds rack and data-center power distribution under maximum workload. The architect must preserve the intended failure domains. Which measured result most directly proves the original requirement is satisfied?
- Distributed compute meets synchronized training performance targets without hidden interconnect bottlenecks.
- Compute nodes receive the design throughput in both normal and expected degraded operation.
- The chosen chassis supports the workload's required compute, I/O and accelerator connectivity.
- Full planned compute population operates within redundant power and thermal envelopes.
Explanation
Correct Answer
D:The relevant measurable success criterion is: Full planned compute population operates within redundant power and thermal envelopes. It addresses the original reported defect: A dense X-Series deployment fits physically but exceeds rack and data-center power distribution under maximum workload. A saved design or configuration command alone does not establish that outcome. Observe the affected system in two independent ways: Calculate chassis peak and redundancy power feeds Validate rack thermal and inlet specifications at projected load. The correction being evaluated is: Size rack PDUs, power supplies and cooling for supported fully loaded chassis scenarios. The underlying reason that correction matters is: Physical rack units are not equivalent to electrical capacity; chassis population and accelerator power require realistic headroom.
Incorrect Answers
A:This metric would help validate a correction to ucs x-series high-speed gpu workload locality, rather than the original reported issue. The other issue is: A GPU application spans several compute modules with heavy collective traffic but its design assumes in-chassis accelerator bandwidth extends transparently across racks. Here the defect to be resolved is: A dense X-Series deployment fits physically but exceeds rack and data-center power distribution under maximum workload. The expected measurable outcome for the actual incident is: Full planned compute population operates within redundant power and thermal envelopes. A positive result for the other service would not prove this requirement is met.
B:This metric would help validate a correction to ucs x-series network oversubscription, rather than the original reported issue. The other issue is: X-Series blades require 100G-class east-west throughput but the selected FI uplink design provides only low aggregate uplink capacity. Here the defect to be resolved is: A dense X-Series deployment fits physically but exceeds rack and data-center power distribution under maximum workload. The expected measurable outcome for the actual incident is: Full planned compute population operates within redundant power and thermal envelopes. A positive result for the other service would not prove this requirement is met.
C:This metric would help validate a correction to ucs x-series compute and pcie scalability, rather than the original reported issue. The other issue is: A UCS X-Series proposal adds accelerator-heavy nodes without validating chassis fabric and PCIe connectivity capabilities. Here the defect to be resolved is: A dense X-Series deployment fits physically but exceeds rack and data-center power distribution under maximum workload. The expected measurable outcome for the actual incident is: Full planned compute population operates within redundant power and thermal envelopes. A positive result for the other service would not prove this requirement is met.
Question 365
At a mission-critical UCS blade installation, a post-incident design review focuses on preventing: A dense X-Series deployment fits physically but exceeds rack and data-center power distribution under maximum workload. The team needs a defensible design decision rather than a vendor feature checklist. Which continuing design control best prevents the same problem from recurring?
- Track integrated release qualification before approving future changes.
- Rebalance compute placement when workload parallelism or GPU distribution changes.
- Track actual energy and thermal utilization before increasing node density.
- Version templates and test hardware compatibility before full-scale rollout.
Explanation
Correct Answer
C:The most relevant ongoing safeguard is: Track actual energy and thermal utilization before increasing node density. The risk it addresses is: A dense X-Series deployment fits physically but exceeds rack and data-center power distribution under maximum workload. This check is tied to the technical principle: Physical rack units are not equivalent to electrical capacity; chassis population and accelerator power require realistic headroom. The immediate correction remains: Size rack PDUs, power supplies and cooling for supported fully loaded chassis scenarios. Periodically validate the safeguard through two different observations. Calculate chassis peak and redundancy power feeds Validate rack thermal and inlet specifications at projected load. The continuing acceptance target is: Full planned compute population operates within redundant power and thermal envelopes.
Incorrect Answers
A:This is a continuing control for ucs x-series firmware rollout constraints; its underlying principle is: UCS domain components and server adapters require supported release combinations, even when each device is individually upgradeable. The recurring risk here is different: A dense X-Series deployment fits physically but exceeds rack and data-center power distribution under maximum workload. The appropriate ongoing control must prevent recurrence of that particular failure, not just the separate issue of: A mixed UCS X-Series and FI rollout upgrades chassis fabric modules and server firmware simultaneously without validating a supported interoperability matrix. The intended long-term acceptance condition remains: Full planned compute population operates within redundant power and thermal envelopes.
B:This is a continuing control for ucs x-series high-speed gpu workload locality; its underlying principle is: Intra-node accelerator communication and inter-node network traffic use different links and performance budgets. The recurring risk here is different: A dense X-Series deployment fits physically but exceeds rack and data-center power distribution under maximum workload. The appropriate ongoing control must prevent recurrence of that particular failure, not just the separate issue of: A GPU application spans several compute modules with heavy collective traffic but its design assumes in-chassis accelerator bandwidth extends transparently across racks. The intended long-term acceptance condition remains: Full planned compute population operates within redundant power and thermal envelopes.
D:This is a continuing control for ucs x-series service-profile inheritance; its underlying principle is: Domain profiles, server profiles and adapter policy compatibility govern how X-Series resources are provisioned. The recurring risk here is different: A dense X-Series deployment fits physically but exceeds rack and data-center power distribution under maximum workload. The appropriate ongoing control must prevent recurrence of that particular failure, not just the separate issue of: An Intersight-managed X-Series policy template uses settings suited to a previous chassis generation and fails on a new node. The intended long-term acceptance condition remains: Full planned compute population operates within redundant power and thermal envelopes.
Question 366
At a mission-critical UCS blade installation, during a controlled design review, the team discovers: X-Series blades require 100G-class east-west throughput but the selected FI uplink design provides only low aggregate uplink capacity. The maintenance plan must not disrupt unrelated tenants. Which design correction most directly addresses this specific failure or requirement?
- Clone or update supported Intersight server-profile templates after validating hardware-specific policy fields.
- Plan appropriate fabric module, FI and upstream bandwidth based on workload traffic measurements.
- Size rack PDUs, power supplies and cooling for supported fully loaded chassis scenarios.
- Select the appropriate X-Series chassis, fabric modules, adapters and GPU-capable modules from validated compatibility choices.
Explanation
Correct Answer
B:The relevant failure is: X-Series blades require 100G-class east-west throughput but the selected FI uplink design provides only low aggregate uplink capacity. The technical distinction is: Fabric module and FI uplink selection must account for compute workload traffic and oversubscription independently of blade CPU/GPU specification. The targeted correction is: Plan appropriate fabric module, FI and upstream bandwidth based on workload traffic measurements. Before changing the design, check two independent observations. Estimate server east-west and north-south rates under concurrency Measure projected uplink saturation with one network path unavailable. Accept the change only if: Compute nodes receive the design throughput in both normal and expected degraded operation.
Incorrect Answers
A:This action targets ucs x-series service-profile inheritance, where the mechanism is: Domain profiles, server profiles and adapter policy compatibility govern how X-Series resources are provisioned. That is a separate condition from the problem in this question: X-Series blades require 100G-class east-west throughput but the selected FI uplink design provides only low aggregate uplink capacity. Even a successful repair of the alternative would not establish the required result: Compute nodes receive the design throughput in both normal and expected degraded operation. The applicable design change must address the diagnosed mechanism of the stated case, not the neighboring design problem.
C:This action targets ucs x-series rack power density, where the mechanism is: Physical rack units are not equivalent to electrical capacity; chassis population and accelerator power require realistic headroom. That is a separate condition from the problem in this question: X-Series blades require 100G-class east-west throughput but the selected FI uplink design provides only low aggregate uplink capacity. Even a successful repair of the alternative would not establish the required result: Compute nodes receive the design throughput in both normal and expected degraded operation. The applicable design change must address the diagnosed mechanism of the stated case, not the neighboring design problem.
D:This action targets ucs x-series compute and pcie scalability, where the mechanism is: UCS X-Series modular compute and optional PCIe expansion depend on compatible chassis, fabric modules, adapters and supported resource architecture. That is a separate condition from the problem in this question: X-Series blades require 100G-class east-west throughput but the selected FI uplink design provides only low aggregate uplink capacity. Even a successful repair of the alternative would not establish the required result: Compute nodes receive the design throughput in both normal and expected degraded operation. The applicable design change must address the diagnosed mechanism of the stated case, not the neighboring design problem.
Question 367
At an Intersight-managed UCS cluster, before changing the fabric, the team observes: X-Series blades require 100G-class east-west throughput but the selected FI uplink design provides only low aggregate uplink capacity. Acceptance requires evidence from the running system, not just the saved design. Which pair of observations most directly tests the proposed diagnosis before a change?
- Compare intended version set against Cisco-supported interoperability matrix; validate one-node networking/storage paths after a staged upgrade.
- Inspect hypervisor or application live migration requirements; test workload continuity during planned removal of an eligible node.
- Estimate server east-west and north-south rates under concurrency; measure projected uplink saturation with one network path unavailable.
- Calculate chassis peak and redundancy power feeds; validate rack thermal and inlet specifications at projected load.
Explanation
Correct Answer
C:The first observation is: Estimate server east-west and north-south rates under concurrency The independent second observation is: Measure projected uplink saturation with one network path unavailable. Together they test the proposed diagnosis of this incident: X-Series blades require 100G-class east-west throughput but the selected FI uplink design provides only low aggregate uplink capacity. The underlying technical principle is: Fabric module and FI uplink selection must account for compute workload traffic and oversubscription independently of blade CPU/GPU specification. If those checks confirm it, the appropriate next action is: Plan appropriate fabric module, FI and upstream bandwidth based on workload traffic measurements. The expected measurable result is: Compute nodes receive the design throughput in both normal and expected degraded operation.
Incorrect Answers
A:These observations investigate ucs x-series firmware rollout constraints; they would be useful if the symptoms were: A mixed UCS X-Series and FI rollout upgrades chassis fabric modules and server firmware simultaneously without validating a supported interoperability matrix. That alternative rests on the principle: UCS domain components and server adapters require supported release combinations, even when each device is individually upgradeable. The question instead asks for evidence about: X-Series blades require 100G-class east-west throughput but the selected FI uplink design provides only low aggregate uplink capacity. The discriminating observations here are: Estimate server east-west and north-south rates under concurrency Measure projected uplink saturation with one network path unavailable.
B:These observations investigate compute hot-swap versus application state; they would be useful if the symptoms were: An operator assumes a modular X-Series compute node can be replaced without application disruption simply because it is physically serviceable. That alternative rests on the principle: Hardware serviceability does not automatically provide application HA or preserved in-memory state. The question instead asks for evidence about: X-Series blades require 100G-class east-west throughput but the selected FI uplink design provides only low aggregate uplink capacity. The discriminating observations here are: Estimate server east-west and north-south rates under concurrency Measure projected uplink saturation with one network path unavailable.
D:These observations investigate ucs x-series rack power density; they would be useful if the symptoms were: A dense X-Series deployment fits physically but exceeds rack and data-center power distribution under maximum workload. That alternative rests on the principle: Physical rack units are not equivalent to electrical capacity; chassis population and accelerator power require realistic headroom. The question instead asks for evidence about: X-Series blades require 100G-class east-west throughput but the selected FI uplink design provides only low aggregate uplink capacity. The discriminating observations here are: Estimate server east-west and north-south rates under concurrency Measure projected uplink saturation with one network path unavailable.
Question 368
At a dual-fabric virtualization host estate, the data-center team needs to explain this behavior: X-Series blades require 100G-class east-west throughput but the selected FI uplink design provides only low aggregate uplink capacity. One component outage must remain inside the agreed availability budget. Which engineering principle best explains the observed behavior?
- Hardware serviceability does not automatically provide application HA or preserved in-memory state.
- Physical rack units are not equivalent to electrical capacity; chassis population and accelerator power require realistic headroom.
- Fabric module and FI uplink selection must account for compute workload traffic and oversubscription independently of blade CPU/GPU specification.
- UCS X-Series modular compute and optional PCIe expansion depend on compatible chassis, fabric modules, adapters and supported resource architecture.
Explanation
Correct Answer
C:The controlling technical principle is: Fabric module and FI uplink selection must account for compute workload traffic and oversubscription independently of blade CPU/GPU specification. This matters because the reported design failure is: X-Series blades require 100G-class east-west throughput but the selected FI uplink design provides only low aggregate uplink capacity. The first diagnostic check is: Estimate server east-west and north-south rates under concurrency The independent check is: Measure projected uplink saturation with one network path unavailable. These facts support the targeted intervention: Plan appropriate fabric module, FI and upstream bandwidth based on workload traffic measurements. Confirm that the resulting design meets this condition: Compute nodes receive the design throughput in both normal and expected degraded operation.
Incorrect Answers
A:The offered principle describes compute hot-swap versus application state: Hardware serviceability does not automatically provide application HA or preserved in-memory state. That is useful for a distinct incident, such as: An operator assumes a modular X-Series compute node can be replaced without application disruption simply because it is physically serviceable. It does not account for the reported failure: X-Series blades require 100G-class east-west throughput but the selected FI uplink design provides only low aggregate uplink capacity. The governing principle in this situation is: Fabric module and FI uplink selection must account for compute workload traffic and oversubscription independently of blade CPU/GPU specification.
B:The offered principle describes ucs x-series rack power density: Physical rack units are not equivalent to electrical capacity; chassis population and accelerator power require realistic headroom. That is useful for a distinct incident, such as: A dense X-Series deployment fits physically but exceeds rack and data-center power distribution under maximum workload. It does not account for the reported failure: X-Series blades require 100G-class east-west throughput but the selected FI uplink design provides only low aggregate uplink capacity. The governing principle in this situation is: Fabric module and FI uplink selection must account for compute workload traffic and oversubscription independently of blade CPU/GPU specification.
D:The offered principle describes ucs x-series compute and pcie scalability: UCS X-Series modular compute and optional PCIe expansion depend on compatible chassis, fabric modules, adapters and supported resource architecture. That is useful for a distinct incident, such as: A UCS X-Series proposal adds accelerator-heavy nodes without validating chassis fabric and PCIe connectivity capabilities. It does not account for the reported failure: X-Series blades require 100G-class east-west throughput but the selected FI uplink design provides only low aggregate uplink capacity. The governing principle in this situation is: Fabric module and FI uplink selection must account for compute workload traffic and oversubscription independently of blade CPU/GPU specification.
Question 369
At a Cisco UCS domain expansion, the team completed an authorized repair for: X-Series blades require 100G-class east-west throughput but the selected FI uplink design provides only low aggregate uplink capacity. The architect must preserve the intended failure domains. Which measured result most directly proves the original requirement is satisfied?
- Node maintenance meets the application recovery target without relying on mechanical hot-swap as HA.
- All components run compatible software with retained data and SAN reachability.
- Distributed compute meets synchronized training performance targets without hidden interconnect bottlenecks.
- Compute nodes receive the design throughput in both normal and expected degraded operation.
Explanation
Correct Answer
D:The relevant measurable success criterion is: Compute nodes receive the design throughput in both normal and expected degraded operation. It addresses the original reported defect: X-Series blades require 100G-class east-west throughput but the selected FI uplink design provides only low aggregate uplink capacity. A saved design or configuration command alone does not establish that outcome. Observe the affected system in two independent ways: Estimate server east-west and north-south rates under concurrency Measure projected uplink saturation with one network path unavailable. The correction being evaluated is: Plan appropriate fabric module, FI and upstream bandwidth based on workload traffic measurements. The underlying reason that correction matters is: Fabric module and FI uplink selection must account for compute workload traffic and oversubscription independently of blade CPU/GPU specification.
Incorrect Answers
A:This metric would help validate a correction to compute hot-swap versus application state, rather than the original reported issue. The other issue is: An operator assumes a modular X-Series compute node can be replaced without application disruption simply because it is physically serviceable. Here the defect to be resolved is: X-Series blades require 100G-class east-west throughput but the selected FI uplink design provides only low aggregate uplink capacity. The expected measurable outcome for the actual incident is: Compute nodes receive the design throughput in both normal and expected degraded operation. A positive result for the other service would not prove this requirement is met.
B:This metric would help validate a correction to ucs x-series firmware rollout constraints, rather than the original reported issue. The other issue is: A mixed UCS X-Series and FI rollout upgrades chassis fabric modules and server firmware simultaneously without validating a supported interoperability matrix. Here the defect to be resolved is: X-Series blades require 100G-class east-west throughput but the selected FI uplink design provides only low aggregate uplink capacity. The expected measurable outcome for the actual incident is: Compute nodes receive the design throughput in both normal and expected degraded operation. A positive result for the other service would not prove this requirement is met.
C:This metric would help validate a correction to ucs x-series high-speed gpu workload locality, rather than the original reported issue. The other issue is: A GPU application spans several compute modules with heavy collective traffic but its design assumes in-chassis accelerator bandwidth extends transparently across racks. Here the defect to be resolved is: X-Series blades require 100G-class east-west throughput but the selected FI uplink design provides only low aggregate uplink capacity. The expected measurable outcome for the actual incident is: Compute nodes receive the design throughput in both normal and expected degraded operation. A positive result for the other service would not prove this requirement is met.
Question 370
At a modular X-Series compute design, the architecture standards group considers the recurring risk: X-Series blades require 100G-class east-west throughput but the selected FI uplink design provides only low aggregate uplink capacity. The team needs a defensible design decision rather than a vendor feature checklist. Which continuing design control best prevents the same problem from recurring?
- Review application evacuation steps in chassis maintenance runbooks.
- Re-evaluate FI uplink expansion before adding data-heavy blades.
- Track integrated release qualification before approving future changes.
- Track actual energy and thermal utilization before increasing node density.
Explanation
Correct Answer
B:The most relevant ongoing safeguard is: Re-evaluate FI uplink expansion before adding data-heavy blades. The risk it addresses is: X-Series blades require 100G-class east-west throughput but the selected FI uplink design provides only low aggregate uplink capacity. This check is tied to the technical principle: Fabric module and FI uplink selection must account for compute workload traffic and oversubscription independently of blade CPU/GPU specification. The immediate correction remains: Plan appropriate fabric module, FI and upstream bandwidth based on workload traffic measurements. Periodically validate the safeguard through two different observations. Estimate server east-west and north-south rates under concurrency Measure projected uplink saturation with one network path unavailable. The continuing acceptance target is: Compute nodes receive the design throughput in both normal and expected degraded operation.
Incorrect Answers
A:This is a continuing control for compute hot-swap versus application state; its underlying principle is: Hardware serviceability does not automatically provide application HA or preserved in-memory state. The recurring risk here is different: X-Series blades require 100G-class east-west throughput but the selected FI uplink design provides only low aggregate uplink capacity. The appropriate ongoing control must prevent recurrence of that particular failure, not just the separate issue of: An operator assumes a modular X-Series compute node can be replaced without application disruption simply because it is physically serviceable. The intended long-term acceptance condition remains: Compute nodes receive the design throughput in both normal and expected degraded operation.
C:This is a continuing control for ucs x-series firmware rollout constraints; its underlying principle is: UCS domain components and server adapters require supported release combinations, even when each device is individually upgradeable. The recurring risk here is different: X-Series blades require 100G-class east-west throughput but the selected FI uplink design provides only low aggregate uplink capacity. The appropriate ongoing control must prevent recurrence of that particular failure, not just the separate issue of: A mixed UCS X-Series and FI rollout upgrades chassis fabric modules and server firmware simultaneously without validating a supported interoperability matrix. The intended long-term acceptance condition remains: Compute nodes receive the design throughput in both normal and expected degraded operation.
D:This is a continuing control for ucs x-series rack power density; its underlying principle is: Physical rack units are not equivalent to electrical capacity; chassis population and accelerator power require realistic headroom. The recurring risk here is different: X-Series blades require 100G-class east-west throughput but the selected FI uplink design provides only low aggregate uplink capacity. The appropriate ongoing control must prevent recurrence of that particular failure, not just the separate issue of: A dense X-Series deployment fits physically but exceeds rack and data-center power distribution under maximum workload. The intended long-term acceptance condition remains: Compute nodes receive the design throughput in both normal and expected degraded operation.