Cisco 300-410 Practice Test 45
Question 440
Following a production change at the Mesa service-provider handoff, a maintenance SSH exception remains open after the approved window ends even though the router has a time-range ACL. The incident is affecting a tenant service; the response team has a rollback window. The new configuration worsens service. Which controlled rollback should the team perform?
- Remove the maintenance permit if clocks or schedules cannot be trusted.
- Restore the former ACL order if the specific permit unintentionally opens additional sources.
- Remove the new IPv6 filter if it unexpectedly prevents necessary IPv6 control-plane exchanges.
- Restore prior ACL placement if unrelated production flows become blocked.
Explanation
Correct Answer
A:Remove the maintenance permit if clocks or schedules cannot be trusted. Time-based ACL entries depend on correct local time and an actively applied time-range definition.
Incorrect Answers
B:Restore the former ACL order if the specific permit unintentionally opens additional sources. This is a rollback for a different component (Extended ACL first-match semantics), where Extended ACL processing stops on the first matching entry, followed by an implicit deny if none matches. Here the evidence instead concerns time-based acl: Time-based ACL entries depend on correct local time and an actively applied time-range definition.
C:Remove the new IPv6 filter if it unexpectedly prevents necessary IPv6 control-plane exchanges. This is a rollback for a different component (IPv6 traffic-filter placement), where IPv4 ACLs do not filter IPv6 packets; IPv6 traffic filters require their own attachment and careful ICMPv6 treatment. Here the evidence instead concerns time-based acl: Time-based ACL entries depend on correct local time and an actively applied time-range definition.
D:Restore prior ACL placement if unrelated production flows become blocked. This is a rollback for a different component (Standard IPv4 ACL placement), where Standard IPv4 ACLs match source addresses, so placement can cause unintended broad filtering. Here the evidence instead concerns time-based acl: Time-based ACL entries depend on correct local time and an actively applied time-range definition.
Question 441
Following a production change at the Huntsville branch site, a standard ACL intended to block one branch source subnet inadvertently blocks access to several unrelated destinations. The incident is affecting a business-critical application; the response team has a rollback window. Which observation is the strongest first diagnostic check for this symptom?
- Inspect AAA command-authorization method lists, server response attributes, and privilege level for the operator.
- Check ACL type, source-only matching, direction, and placement relative to branch and destination.
- Inspect the applied control-plane policy and classify actual OSPF packet counters versus default-class drops.
- Inspect uRPF drop counters and the reverse lookup's selected egress interface for the source address.
Explanation
Correct Answer
B:Check ACL type, source-only matching, direction, and placement relative to branch and destination. Standard IPv4 ACLs match source addresses, so placement can cause unintended broad filtering.
Incorrect Answers
A:Inspect AAA command-authorization method lists, server response attributes, and privilege level for the operator. This is an investigation for a different failure condition (TACACS+ command authorization), where TACACS+ can authorize individual CLI commands separately from successful login authentication. Here the evidence instead concerns standard ipv4 acl placement: Standard IPv4 ACLs match source addresses, so placement can cause unintended broad filtering.
C:Inspect the applied control-plane policy and classify actual OSPF packet counters versus default-class drops. This is an investigation for a different failure condition (CoPP misclassification), where CoPP class maps and their policing rates determine which control-plane packets are forwarded to the CPU. Here the evidence instead concerns standard ipv4 acl placement: Standard IPv4 ACLs match source addresses, so placement can cause unintended broad filtering.
D:Inspect uRPF drop counters and the reverse lookup's selected egress interface for the source address. This is an investigation for a different failure condition (Strict uRPF asymmetric routing), where Strict uRPF can reject a packet when the best reverse route points to an interface other than its ingress. Here the evidence instead concerns standard ipv4 acl placement: Standard IPv4 ACLs match source addresses, so placement can cause unintended broad filtering.
Question 442
Following a production change at the Huntsville branch site, a standard ACL intended to block one branch source subnet inadvertently blocks access to several unrelated destinations. The incident is affecting a business-critical application; the response team has a rollback window. What change best addresses the root mechanism without unnecessarily changing other paths?
- Add a narrowly scoped monitoring permit before the implicit deny instead of inserting a general any-any permit.
- Tie the SSH permit to a correctly defined time range and synchronize device time.
- Place the standard ACL nearer the intended destination or use a scoped extended ACL when destination precision is required.
- Apply an appropriately scoped IPv6 access list in the correct direction without relying on IPv4 ACL behavior.
Explanation
Correct Answer
C:Place the standard ACL nearer the intended destination or use a scoped extended ACL when destination precision is required. Standard IPv4 ACLs match source addresses, so placement can cause unintended broad filtering.
Incorrect Answers
A:Add a narrowly scoped monitoring permit before the implicit deny instead of inserting a general any-any permit. This is a configuration change for a different root cause (ACL implicit deny), where IP access lists implicitly deny traffic that matches no explicit permit statement. Here the evidence instead concerns standard ipv4 acl placement: Standard IPv4 ACLs match source addresses, so placement can cause unintended broad filtering.
B:Tie the SSH permit to a correctly defined time range and synchronize device time. This is a configuration change for a different root cause (Time-based ACL), where Time-based ACL entries depend on correct local time and an actively applied time-range definition. Here the evidence instead concerns standard ipv4 acl placement: Standard IPv4 ACLs match source addresses, so placement can cause unintended broad filtering.
D:Apply an appropriately scoped IPv6 access list in the correct direction without relying on IPv4 ACL behavior. This is a configuration change for a different root cause (IPv6 traffic-filter placement), where IPv4 ACLs do not filter IPv6 packets; IPv6 traffic filters require their own attachment and careful ICMPv6 treatment. Here the evidence instead concerns standard ipv4 acl placement: Standard IPv4 ACLs match source addresses, so placement can cause unintended broad filtering.
Question 443
Following a production change at the Huntsville branch site, a standard ACL intended to block one branch source subnet inadvertently blocks access to several unrelated destinations. The incident is affecting a business-critical application; the response team has a rollback window. Which verification result would provide the most relevant acceptance evidence?
- Simulate RADIUS unreachability and confirm designated local break-glass login succeeds without bypassing normal rejects.
- Test the matching IPv6 flows and required neighbor discovery traffic after deployment.
- Verify stable OSPF adjacencies and acceptable class counters during convergence.
- Test the blocked source against the target and unrelated destinations to ensure only intended traffic is affected.
Explanation
Correct Answer
D:Test the blocked source against the target and unrelated destinations to ensure only intended traffic is affected. Standard IPv4 ACLs match source addresses, so placement can cause unintended broad filtering.
Incorrect Answers
A:Simulate RADIUS unreachability and confirm designated local break-glass login succeeds without bypassing normal rejects. This is a validation for another mechanism (RADIUS AAA fallback), where AAA method lists try subsequent methods for server errors, not necessarily for a definitive authentication rejection. Here the evidence instead concerns standard ipv4 acl placement: Standard IPv4 ACLs match source addresses, so placement can cause unintended broad filtering.
B:Test the matching IPv6 flows and required neighbor discovery traffic after deployment. This is a validation for another mechanism (IPv6 traffic-filter placement), where IPv4 ACLs do not filter IPv6 packets; IPv6 traffic filters require their own attachment and careful ICMPv6 treatment. Here the evidence instead concerns standard ipv4 acl placement: Standard IPv4 ACLs match source addresses, so placement can cause unintended broad filtering.
C:Verify stable OSPF adjacencies and acceptable class counters during convergence. This is a validation for another mechanism (CoPP misclassification), where CoPP class maps and their policing rates determine which control-plane packets are forwarded to the CPU. Here the evidence instead concerns standard ipv4 acl placement: Standard IPv4 ACLs match source addresses, so placement can cause unintended broad filtering.
Question 444
Following a production change at the Huntsville branch site, a standard ACL intended to block one branch source subnet inadvertently blocks access to several unrelated destinations. The incident is affecting a business-critical application; the response team has a rollback window. Which TWO complementary steps provide both relevant fault isolation and a controlled correction?
- Check ACL type, source-only matching, direction, and placement relative to branch and destination.
- Apply an appropriately scoped IPv6 access list in the correct direction without relying on IPv4 ACL behavior.
- Place the standard ACL nearer the intended destination or use a scoped extended ACL when destination precision is required.
- Inspect ACL time-range references, active time-range status, and router clock/time zone.
Explanation
Correct Answers
A:Check ACL type, source-only matching, direction, and placement relative to branch and destination. Standard IPv4 ACLs match source addresses, so placement can cause unintended broad filtering.
C:Place the standard ACL nearer the intended destination or use a scoped extended ACL when destination precision is required. Standard IPv4 ACLs match source addresses, so placement can cause unintended broad filtering.
Incorrect Answers
B:Apply an appropriately scoped IPv6 access list in the correct direction without relying on IPv4 ACL behavior. This is a configuration change for a different root cause (IPv6 traffic-filter placement), where IPv4 ACLs do not filter IPv6 packets; IPv6 traffic filters require their own attachment and careful ICMPv6 treatment. Here the evidence instead concerns standard ipv4 acl placement: Standard IPv4 ACLs match source addresses, so placement can cause unintended broad filtering.
D:Inspect ACL time-range references, active time-range status, and router clock/time zone. This is an investigation for a different failure condition (Time-based ACL), where Time-based ACL entries depend on correct local time and an actively applied time-range definition. Here the evidence instead concerns standard ipv4 acl placement: Standard IPv4 ACLs match source addresses, so placement can cause unintended broad filtering.
Question 445
Following a production change at the Reno branch site, a campus application intermittently fails between two endpoints, and operators cannot determine which hop imposes the failure. The incident is affecting a business-critical application; the response team has a rollback window. Which observation is the strongest first diagnostic check for this symptom?
- Run the supported Cisco Catalyst Center Assurance path trace and examine hop-by-hop forwarding evidence.
- Inspect Cisco Catalyst Center Assurance client health, onboarding timeline, and application reachability signals.
- Inspect the VTY access-class, source subnet permit entries, and applied inbound direction.
- Inspect exporter destination address, UDP port, source-interface, VRF, and export statistics.
Explanation
Correct Answer
A:Run the supported Cisco Catalyst Center Assurance path trace and examine hop-by-hop forwarding evidence. Assurance path-trace capabilities can isolate the segment traversed by traffic and support focused troubleshooting.
Incorrect Answers
B:Inspect Cisco Catalyst Center Assurance client health, onboarding timeline, and application reachability signals. This is an investigation for a different failure condition (Catalyst Center client assurance), where Catalyst Center Assurance correlates client experience with network/device telemetry to support diagnosis. Here the evidence instead concerns catalyst center path trace: Assurance path-trace capabilities can isolate the segment traversed by traffic and support focused troubleshooting.
C:Inspect the VTY access-class, source subnet permit entries, and applied inbound direction. This is an investigation for a different failure condition (VTY access-class), where A VTY access-class restricts which source addresses can open remote terminal sessions to the router. Here the evidence instead concerns catalyst center path trace: Assurance path-trace capabilities can isolate the segment traversed by traffic and support focused troubleshooting.
D:Inspect exporter destination address, UDP port, source-interface, VRF, and export statistics. This is an investigation for a different failure condition (NetFlow exporter destination), where Flow collection and export are distinct: valid local cache entries do not imply successful export transport. Here the evidence instead concerns catalyst center path trace: Assurance path-trace capabilities can isolate the segment traversed by traffic and support focused troubleshooting.
Question 446
Following a production change at the Reno branch site, a campus application intermittently fails between two endpoints, and operators cannot determine which hop imposes the failure. The incident is affecting a business-critical application; the response team has a rollback window. What change best addresses the root mechanism without unnecessarily changing other paths?
- Enable the appropriate SCP service and narrowly scoped permissions for the backup account.
- Set the appropriate remote logging level and destination for the intended operational events.
- Use targeted Assurance findings to remediate the documented WLAN, authentication, or upstream issue.
- Fix the specifically identified failed link, ACL, or routing segment rather than reconfiguring unrelated sites.
Explanation
Correct Answer
D:Fix the specifically identified failed link, ACL, or routing segment rather than reconfiguring unrelated sites. Assurance path-trace capabilities can isolate the segment traversed by traffic and support focused troubleshooting.
Incorrect Answers
A:Enable the appropriate SCP service and narrowly scoped permissions for the backup account. This is a configuration change for a different root cause (SCP configuration backup), where SCP uses SSH transport but requires appropriate service support and file privileges. Here the evidence instead concerns catalyst center path trace: Assurance path-trace capabilities can isolate the segment traversed by traffic and support focused troubleshooting.
B:Set the appropriate remote logging level and destination for the intended operational events. This is a configuration change for a different root cause (Syslog severity filtering), where Local logging and remote syslog use separate targets and severity thresholds. Here the evidence instead concerns catalyst center path trace: Assurance path-trace capabilities can isolate the segment traversed by traffic and support focused troubleshooting.
C:Use targeted Assurance findings to remediate the documented WLAN, authentication, or upstream issue. This is a configuration change for a different root cause (Catalyst Center client assurance), where Catalyst Center Assurance correlates client experience with network/device telemetry to support diagnosis. Here the evidence instead concerns catalyst center path trace: Assurance path-trace capabilities can isolate the segment traversed by traffic and support focused troubleshooting.
Question 447
Following a production change at the Reno branch site, a campus application intermittently fails between two endpoints, and operators cannot determine which hop imposes the failure. The incident is affecting a business-critical application; the response team has a rollback window. Which verification result would provide the most relevant acceptance evidence?
- Confirm client health improves for the affected population rather than relying only on global device uptime.
- Verify a test client receives the correct gateway and can reach a remote subnet.
- Verify authorized SNMP polling works and an unauthorized source remains blocked.
- Repeat path trace and an application-level test to confirm the failing segment is corrected.
Explanation
Correct Answer
D:Repeat path trace and an application-level test to confirm the failing segment is corrected. Assurance path-trace capabilities can isolate the segment traversed by traffic and support focused troubleshooting.
Incorrect Answers
A:Confirm client health improves for the affected population rather than relying only on global device uptime. This is a validation for another mechanism (Catalyst Center client assurance), where Catalyst Center Assurance correlates client experience with network/device telemetry to support diagnosis. Here the evidence instead concerns catalyst center path trace: Assurance path-trace capabilities can isolate the segment traversed by traffic and support focused troubleshooting.
B:Verify a test client receives the correct gateway and can reach a remote subnet. This is a validation for another mechanism (DHCP default-router option), where DHCP option 3/default-router tells IPv4 clients which gateway to use; leases can be valid despite a wrong option. Here the evidence instead concerns catalyst center path trace: Assurance path-trace capabilities can isolate the segment traversed by traffic and support focused troubleshooting.
C:Verify authorized SNMP polling works and an unauthorized source remains blocked. This is a validation for another mechanism (SNMPv2c read access), where SNMPv2c community matching and ACL restrictions determine polling access, but v2c itself lacks modern encryption. Here the evidence instead concerns catalyst center path trace: Assurance path-trace capabilities can isolate the segment traversed by traffic and support focused troubleshooting.
Question 448
Following a production change at the Reno branch site, a campus application intermittently fails between two endpoints, and operators cannot determine which hop imposes the failure. The incident is affecting a business-critical application; the response team has a rollback window. Which TWO complementary steps provide both relevant fault isolation and a controlled correction?
- Inspect Cisco Catalyst Center Assurance client health, onboarding timeline, and application reachability signals.
- Add a least-privilege VTY access-class exception for the authorized administration subnet.
- Fix the specifically identified failed link, ACL, or routing segment rather than reconfiguring unrelated sites.
- Run the supported Cisco Catalyst Center Assurance path trace and examine hop-by-hop forwarding evidence.
Explanation
Correct Answers
C:Fix the specifically identified failed link, ACL, or routing segment rather than reconfiguring unrelated sites. Assurance path-trace capabilities can isolate the segment traversed by traffic and support focused troubleshooting.
D:Run the supported Cisco Catalyst Center Assurance path trace and examine hop-by-hop forwarding evidence. Assurance path-trace capabilities can isolate the segment traversed by traffic and support focused troubleshooting.
Incorrect Answers
A:Inspect Cisco Catalyst Center Assurance client health, onboarding timeline, and application reachability signals. This is an investigation for a different failure condition (Catalyst Center client assurance), where Catalyst Center Assurance correlates client experience with network/device telemetry to support diagnosis. Here the evidence instead concerns catalyst center path trace: Assurance path-trace capabilities can isolate the segment traversed by traffic and support focused troubleshooting.
B:Add a least-privilege VTY access-class exception for the authorized administration subnet. This is a configuration change for a different root cause (VTY access-class), where A VTY access-class restricts which source addresses can open remote terminal sessions to the router. Here the evidence instead concerns catalyst center path trace: Assurance path-trace capabilities can isolate the segment traversed by traffic and support focused troubleshooting.
Question 449
During a scheduled validation at the Fargo service-provider handoff, a replacement router has local users and the VTY lines allow SSH, but the SSH service is not listening. Engineers must restore a tenant service without disturbing unrelated production services. Which investigation should be prioritized before the engineer modifies configuration?
- Inspect which debug condition or filter can isolate the affected neighbor or interface.
- Inspect line-specific login method lists, transport settings, and source filters separately for console and VTY.
- Check device hostname/domain, supported cryptographic key material, SSH version, and service status.
- Inspect HTTPS service status and certificate subject or SAN against the accessed DNS name.
Explanation
Correct Answer
C:Check device hostname/domain, supported cryptographic key material, SSH version, and service status. A Cisco IOS SSH server needs valid crypto key material and compatible session settings.
Incorrect Answers
A:Inspect which debug condition or filter can isolate the affected neighbor or interface. This is an investigation for a different failure condition (Conditional debugging), where Conditional debugs reduce diagnostic impact by restricting runtime detail to a relevant context. Here the evidence instead concerns ssh prerequisites: A Cisco IOS SSH server needs valid crypto key material and compatible session settings.
B:Inspect line-specific login method lists, transport settings, and source filters separately for console and VTY. This is an investigation for a different failure condition (Console versus VTY authentication), where Console and VTY lines can use different authentication and authorization methods. Here the evidence instead concerns ssh prerequisites: A Cisco IOS SSH server needs valid crypto key material and compatible session settings.
D:Inspect HTTPS service status and certificate subject or SAN against the accessed DNS name. This is an investigation for a different failure condition (HTTPS device management), where HTTPS management depends on TLS trust and correct certificate identity, not just an enabled port. Here the evidence instead concerns ssh prerequisites: A Cisco IOS SSH server needs valid crypto key material and compatible session settings.
Question 450
During a scheduled validation at the Fargo service-provider handoff, a replacement router has local users and the VTY lines allow SSH, but the SSH service is not listening. Engineers must restore a tenant service without disturbing unrelated production services. Which targeted configuration or policy correction best resolves the described fault?
- Generate an appropriate RSA key pair and enable the supported SSH server configuration.
- Attach the compatible Flexible NetFlow monitor to the correct traffic-facing interface and direction.
- Align the authorized read-only community and NMS source list without adding public write access.
- Repair synchronization to approved NTP sources and use consistent timestamp settings.
Explanation
Correct Answer
A:Generate an appropriate RSA key pair and enable the supported SSH server configuration. A Cisco IOS SSH server needs valid crypto key material and compatible session settings.
Incorrect Answers
B:Attach the compatible Flexible NetFlow monitor to the correct traffic-facing interface and direction. This is a configuration change for a different root cause (Flexible NetFlow monitor attachment), where Flexible NetFlow requires a record/monitor and an appropriate interface or platform attachment to observe flows. Here the evidence instead concerns ssh prerequisites: A Cisco IOS SSH server needs valid crypto key material and compatible session settings.
C:Align the authorized read-only community and NMS source list without adding public write access. This is a configuration change for a different root cause (SNMPv2c read access), where SNMPv2c community matching and ACL restrictions determine polling access, but v2c itself lacks modern encryption. Here the evidence instead concerns ssh prerequisites: A Cisco IOS SSH server needs valid crypto key material and compatible session settings.
D:Repair synchronization to approved NTP sources and use consistent timestamp settings. This is a configuration change for a different root cause (Time synchronization for logs), where Reliable timestamps depend on synchronized device clocks and appropriately configured log timestamps. Here the evidence instead concerns ssh prerequisites: A Cisco IOS SSH server needs valid crypto key material and compatible session settings.