Test Prep ASVAB Test Practice Test 58
Question 570
Which force acts upward on an object submerged in a fluid?
- Centripetal force always
- Friction alone
- Buoyant force
- Electrostatic attraction always
Explanation
Correct Answer
C:Best answer. Fluid pressure differences produce an upward net force.
Incorrect Answers
A:Not best. Centripetal force always: Centripetal describes directed acceleration.
B:Not best. Friction alone: Friction is tangential resistance to motion.
D:Not best. Electrostatic attraction always: Buoyancy does not require charge.
Question 571
What happens to the pressure of a liquid when depth increases in a stationary fluid?
- It is independent of gravity
- It depends only on container color
- It increases
- It always falls to zero
Explanation
Correct Answer
C:Best answer. Hydrostatic pressure grows with density, gravity, and depth.
Incorrect Answers
A:Not best. It is independent of gravity: Hydrostatic pressure depends on g.
B:Not best. It depends only on container color: Color does not control pressure.
D:Not best. It always falls to zero: Pressure increases downward.
Question 572
Why can a narrow hydraulic piston move a heavier load with a wider output piston?
- Piston areas must be identical
- Pressure transmits through confined fluid to larger area
- The fluid must turn solid
- Hydraulic systems make free energy
Explanation
Correct Answer
B:Best answer. Output force is pressure times area. This is the concept directly requested by the question.
Incorrect Answers
A:Not best. Piston areas must be identical: Different areas cause multiplication.
C:Not best. The fluid must turn solid: Fluids transfer pressure while fluid.
D:Not best. Hydraulic systems make free energy: Greater output force comes with shorter travel distance.
Question 573
What kind of stress tends to stretch a metal rod along its length?
- Compression
- Shear
- Tension
- Torsion
Explanation
Correct Answer
C:Best answer. Tensile stress pulls material apart. This is the concept directly requested by the question.
Incorrect Answers
A:Not best. Compression: Compressive stress pushes inward.
B:Not best. Shear: Shear acts tangentially across a section.
D:Not best. Torsion: Torsion twists along an axis. It does not meet the specific requirement in the question.
Question 574
What kind of stress tends to shorten a column under axial loading?
- Bending only
- Tension
- Compression
- Buoyancy
Explanation
Correct Answer
C:Best answer. Compressive force pushes ends toward each other.
Incorrect Answers
A:Not best. Bending only: Bending creates varying tensile/compressive zones.
B:Not best. Tension: Tension stretches a member. It does not meet the specific requirement in the question.
D:Not best. Buoyancy: Buoyancy is a fluid force. It does not meet the specific requirement in the question.
Question 575
What kind of stress acts parallel to a fastener's cross-sectional cut plane?
- Tension
- Hydrostatic pressure
- Magnetic induction
- Shear
Explanation
Correct Answer
D:Best answer. Shear forces act tangentially and can slide adjacent material planes.
Incorrect Answers
A:Not best. Tension: Axial tension acts normal to the section.
B:Not best. Hydrostatic pressure: Pressure acts normal to surfaces.
C:Not best. Magnetic induction: Induction is an electromagnetic process.
Question 576
Why can a low center of gravity improve a vehicle's resistance to tipping?
- It removes all tire friction
- It makes every hill level
- It reduces overturning tendency for a given tilt
- It increases the vehicle's mass automatically
Explanation
Correct Answer
C:Best answer. Lower mass center generally improves static stability.
Incorrect Answers
A:Not best. It removes all tire friction: Tire grip remains important.
B:Not best. It makes every hill level: Terrain geometry is unchanged.
D:Not best. It increases the vehicle's mass automatically: Center location and total mass differ.
Question 577
How does an ideal spring obeying Hooke's law react to twice the extension?
- It produces twice the restoring force
- It generates constant force regardless of extension
- It has zero potential energy always
- It generates half the restoring force
Explanation
Correct Answer
A:Best answer. F = kx in the linear elastic range. This is the concept directly requested by the question.
Incorrect Answers
B:Not best. It generates constant force regardless of extension: A linear spring is displacement dependent.
C:Not best. It has zero potential energy always: Extended springs store elastic energy.
D:Not best. It generates half the restoring force: Force rises with extension.
Question 578
What does a damper usually do in a suspension?
- Create extra vehicle mass
- Store all motion energy forever
- Change wheel diameter
- Dissipate mechanical motion energy
Explanation
Correct Answer
D:Best answer. A shock absorber reduces bouncing oscillations.
Incorrect Answers
A:Not best. Create extra vehicle mass: Damper function is not mass production.
B:Not best. Store all motion energy forever: Damping converts mechanical energy to heat.
C:Not best. Change wheel diameter: Suspension damping does not alter wheel geometry.
Question 579
Why is absolute pressure different from gauge pressure?
- Absolute pressure is always negative
- Gauge pressure is referenced to ambient pressure
- Both are measured only in meters
- Gauge pressure measures temperature
Explanation
Correct Answer
B:Best answer. Absolute pressure is measured relative to vacuum.
Incorrect Answers
A:Not best. Absolute pressure is always negative: Absolute pressure is nonnegative.
C:Not best. Both are measured only in meters: Pressure units include pascals.
D:Not best. Gauge pressure measures temperature: Gauge pressure still measures force per area.
Question 580
What is the mechanical work done by a constant force moving an object in the same direction?
- Mass divided by volume
- Velocity squared without a factor
- Pressure multiplied by temperature
- Force multiplied by displacement
Explanation
Correct Answer
D:Best answer. W = Fd when force and motion align. This is the concept directly requested by the question.
Incorrect Answers
A:Not best. Mass divided by volume: That is density. It does not meet the specific requirement in the question.
B:Not best. Velocity squared without a factor: Not the definition of mechanical work.
C:Not best. Pressure multiplied by temperature: Not the work relation.