Test Prep ASVAB Test Practice Test 59
Question 580
What is the mechanical work done by a constant force moving an object in the same direction?
- Mass divided by volume
- Velocity squared without a factor
- Pressure multiplied by temperature
- Force multiplied by displacement
Explanation
Correct Answer
D:Best answer. W = Fd when force and motion align. This is the concept directly requested by the question.
Incorrect Answers
A:Not best. Mass divided by volume: That is density. It does not meet the specific requirement in the question.
B:Not best. Velocity squared without a factor: Not the definition of mechanical work.
C:Not best. Pressure multiplied by temperature: Not the work relation.
Question 581
What distinguishes power from work?
- Power is a type of mass
- Work is always measured in newtons
- Power cannot be measured for machines
- Power is the rate of doing work
Explanation
Correct Answer
D:Best answer. Power = work divided by elapsed time. This is the concept directly requested by the question.
Incorrect Answers
A:Not best. Power is a type of mass: Mass differs from energy rate.
B:Not best. Work is always measured in newtons: Work is in joules.
C:Not best. Power cannot be measured for machines: Machine power is measurable.
Question 582
Why is real machine efficiency below 100%?
- All machines have exactly the same loss
- Efficiency measures only mass
- Machines can create energy but choose not to
- Some input energy becomes heat, sound, or deformation
Explanation
Correct Answer
D:Best answer. Losses reduce useful output energy. This is the concept directly requested by the question.
Incorrect Answers
A:Not best. All machines have exactly the same loss: Loss depends on design and conditions.
B:Not best. Efficiency measures only mass: It is a ratio of useful to input energy.
C:Not best. Machines can create energy but choose not to: Energy is conserved.
Question 583
What happens to a typical metal rod when its temperature increases?
- It cannot transmit force
- It loses every atom
- It becomes superconducting at all temperatures
- It expands in length
Explanation
Correct Answer
D:Best answer. Thermal expansion usually increases dimensions.
Incorrect Answers
A:Not best. It cannot transmit force: Warm metal can still transmit loads.
B:Not best. It loses every atom: Heating does not vaporize material at ordinary temperature.
C:Not best. It becomes superconducting at all temperatures: Ordinary warming does not do that.
Question 584
What does a flywheel contribute to a rotating machine?
- Stored rotational kinetic energy that smooths speed changes
- Electrical insulation of wiring
- Exact measurement of air temperature
- Fresh chemical fuel
Explanation
Correct Answer
A:Best answer. Flywheel inertia buffers torque fluctuations.
Incorrect Answers
B:Not best. Electrical insulation of wiring: It is a mechanical rotor.
C:Not best. Exact measurement of air temperature: Thermometers measure heat.
D:Not best. Fresh chemical fuel: It is not a fuel tank. It does not meet the specific requirement in the question.
Question 585
What changes as a rigid rotating body's angular speed increases?
- Its diameter increases infinitely
- Its rotational kinetic energy rises roughly with speed squared
- Its moment of inertia must be zero
- Its mass must double every revolution
Explanation
Correct Answer
B:Best answer. For fixed inertia, energy is one-half Iω².
Incorrect Answers
A:Not best. Its diameter increases infinitely: Rotation need not cause unlimited size change.
C:Not best. Its moment of inertia must be zero: Finite rotating bodies have inertia.
D:Not best. Its mass must double every revolution: Mass is conserved.
Question 586
What effect does increasing surface roughness usually have on dry friction?
- It always makes contact friction exactly zero
- It may increase friction, though material conditions matter
- It guarantees friction remains fixed regardless of materials
- It turns all friction into buoyancy
Explanation
Correct Answer
B:Best answer. Contact properties influence friction force.
Incorrect Answers
A:Not best. It always makes contact friction exactly zero: Roughness alone does not eliminate friction.
C:Not best. It guarantees friction remains fixed regardless of materials: Material and load matter.
D:Not best. It turns all friction into buoyancy: These are different forces.
Question 587
What is a belt drive primarily used for?
- Store electric charge in a dielectric
- Transfer rotation and torque between shafts
- Make atmospheric pressure constant
- Convert steel to copper
Explanation
Correct Answer
B:Best answer. A belt links pulleys. This is the concept directly requested by the question.
Incorrect Answers
A:Not best. Store electric charge in a dielectric: Capacitors do that.
C:Not best. Make atmospheric pressure constant: Belts cannot control atmosphere.
D:Not best. Convert steel to copper: It does not transmute metal.
Question 588
What is the purpose of a gear reduction from fast input to slower output?
- Increase both output speed and torque for free
- Eliminate input shaft rotation
- Increase available output torque while reducing speed
- Cancel all bearing friction
Explanation
Correct Answer
C:Best answer. Ideal power balance trades speed for torque.
Incorrect Answers
A:Not best. Increase both output speed and torque for free: Power cannot increase ideally.
B:Not best. Eliminate input shaft rotation: Input remains rotating.
D:Not best. Cancel all bearing friction: Reduction does not remove losses.
Question 589
When an object accelerates while mass remains constant, what relation describes net force?
- F = energy/time
- F = pressure/volume
- F = m × a
- F = m/a
Explanation
Correct Answer
C:Best answer. Newton's second law relates force, mass and acceleration.
Incorrect Answers
A:Not best. F = energy/time: Energy per time is power. It does not meet the specific requirement in the question.
B:Not best. F = pressure/volume: Force does not equal pressure over volume.
D:Not best. F = m/a: That is not Newton's relation. It does not meet the specific requirement in the question.
Question 590
Why is a sharp wedge useful for splitting material?
- It replaces all lubrication systems
- It lowers the object's mass
- It removes the need for any applied effort
- It concentrates force over a small area
Explanation
Correct Answer
D:Best answer. A wedge converts applied force into separating pressure.
Incorrect Answers
A:Not best. It replaces all lubrication systems: A wedge is a simple machine.
B:Not best. It lowers the object's mass: Mass remains. It does not meet the specific requirement in the question.
C:Not best. It removes the need for any applied effort: A wedge still needs input energy.