Test Prep ASVAB Test Practice Test 56
Question 550
Which tool is designed for tightening slotted screw heads?
- Flat-blade screwdriver
- Allen key
- Torx bit
- Hex nut driver
Explanation
Correct Answer
A:Best answer. Its blade fits a straight slot. This is the concept directly requested by the question.
Incorrect Answers
B:Not best. Allen key: An Allen key engages hex socket recesses.
C:Not best. Torx bit: Torx bits fit star-shaped recesses.
D:Not best. Hex nut driver: Nut drivers engage external hexagonal fasteners.
Question 551
What does a wire stripper remove?
- The entire wire core
- Insulation from a wire without excessive conductor damage
- Rust from steel beam surfaces
- All electric potential from a circuit
Explanation
Correct Answer
B:Best answer. A stripper exposes conductor for connection.
Incorrect Answers
A:Not best. The entire wire core: A stripper should preserve the core.
C:Not best. Rust from steel beam surfaces: A stripper is for wire jackets.
D:Not best. All electric potential from a circuit: It is not a voltage tester.
Question 552
What tool makes a compression connection on a properly specified electrical terminal?
- Pipe wrench
- Coping saw
- Crimping tool
- Micrometer
Explanation
Correct Answer
C:Best answer. Matched crimp dies deform a terminal around a conductor.
Incorrect Answers
A:Not best. Pipe wrench: Pipe wrenches grip threaded pipes.
B:Not best. Coping saw: Coping saws cut shapes in wood. It does not meet the specific requirement in the question.
D:Not best. Micrometer: Micrometers measure size. It does not meet the specific requirement in the question.
Question 553
Why are drill-press workpieces normally clamped rather than held by hand?
- Clamps remove the need for eye protection
- Holding by hand improves all tolerances
- The bit can grab and spin the workpiece
- Clamps increase electric supply frequency
Explanation
Correct Answer
C:Best answer. A vise or clamp resists dangerous rotation.
Incorrect Answers
A:Not best. Clamps remove the need for eye protection: Eye protection is still needed.
B:Not best. Holding by hand improves all tolerances: Hand holding is less secure.
D:Not best. Clamps increase electric supply frequency: Clamps are mechanical.
Question 554
What does the term 'kerf' refer to in sawing?
- Length of the handle
- Width of material removed by the blade
- Outside diameter of a pipe
- Pitch of a screw thread
Explanation
Correct Answer
B:Best answer. The kerf is the saw cut width. This is the concept directly requested by the question.
Incorrect Answers
A:Not best. Length of the handle: Handle length is unrelated.
C:Not best. Outside diameter of a pipe: Pipe sizing is separate.
D:Not best. Pitch of a screw thread: Thread pitch is distance between threads.
Question 555
Which piece of shop equipment provides local removal of airborne dust near its source?
- Torque wrench
- Dial indicator
- Dust extraction system
- Bench vise
Explanation
Correct Answer
C:Best answer. Source capture reduces suspended particulate exposure.
Incorrect Answers
A:Not best. Torque wrench: A torque wrench applies known torque.
B:Not best. Dial indicator: An indicator measures displacement.
D:Not best. Bench vise: A vise clamps stock. It does not meet the specific requirement in the question.
Question 556
What does a file do to metal in bench fitting?
- Create current in a battery
- Establish a certified pressure seal automatically
- Measure hardness without touching
- Remove small amounts of material by abrasion and cutting
Explanation
Correct Answer
D:Best answer. File teeth trim and smooth surfaces. This is the concept directly requested by the question.
Incorrect Answers
A:Not best. Create current in a battery: A file is mechanical.
B:Not best. Establish a certified pressure seal automatically: A file alone does not seal joints.
C:Not best. Measure hardness without touching: Filing is not a hardness gauge.
Question 557
What is a scriber typically made to do?
- Inspect electrical insulation resistance
- Weld steel seams
- Scratch a precise line on metal for layout
- Cut a threaded screw
Explanation
Correct Answer
C:Best answer. A hardened point marks a visible line. This is the concept directly requested by the question.
Incorrect Answers
A:Not best. Inspect electrical insulation resistance: Electrical meters handle insulation tests.
B:Not best. Weld steel seams: Welding joins metal. It does not meet the specific requirement in the question.
D:Not best. Cut a threaded screw: A die or saw may do that.
Question 558
What are personal safety glasses intended to protect against in a shop?
- All crushing loads on feet
- All inhaled fumes
- Flying chips and particles
- All loud noise
Explanation
Correct Answer
C:Best answer. Safety-rated lenses shield the eyes from impact hazards.
Incorrect Answers
A:Not best. All crushing loads on feet: Safety footwear addresses foot injury.
B:Not best. All inhaled fumes: Respirators and ventilation address air hazards.
D:Not best. All loud noise: Hearing protection addresses sound.
Question 559
What is the best way to check whether a power tool is safe before maintenance?
- Ask someone to hold the trigger
- Isolate its energy source according to the applicable procedure
- Disconnect the grounding conductor but keep power on
- Trust the switch label alone while energized
Explanation
Correct Answer
B:Best answer. Lockout/tagout or proper disconnection prevents unexpected start.
Incorrect Answers
A:Not best. Ask someone to hold the trigger: That increases risk.
C:Not best. Disconnect the grounding conductor but keep power on: That can increase shock hazard.
D:Not best. Trust the switch label alone while energized: Switches may fail or be bumped.
Question 560
What is a rivet commonly used for in sheet-metal work?
- Measure thread pitch
- Make a permanent mechanical fastening between pieces
- Sharpen a bandsaw blade automatically
- Control an electrical waveform
Explanation
Correct Answer
B:Best answer. A rivet is deformed to secure aligned holes.
Incorrect Answers
A:Not best. Measure thread pitch: A pitch gauge measures threads.
C:Not best. Sharpen a bandsaw blade automatically: Rivets are fasteners, not blade-sharpening tools.
D:Not best. Control an electrical waveform: Oscilloscopes display signals.