Test Prep ASVAB Test Practice Test 53
Question 520
Which tool is normally used to tighten a hexagonal nut without damaging its flats?
- Correct-size box-end wrench
- Pliers with serrated jaws in all cases
- Center punch
- Flat file
Explanation
Correct Answer
A:Best answer. A fitted box end grips the nut flats securely.
Incorrect Answers
B:Not best. Pliers with serrated jaws in all cases: Pliers may round fastener heads.
C:Not best. Center punch: A punch marks positions. It does not meet the specific requirement in the question.
D:Not best. Flat file: A file removes material rather than tightens.
Question 521
What is the main advantage of a socket wrench with a ratchet?
- Turn a fastener without removing and repositioning the handle each stroke
- Changes bolt metal chemistry
- Cuts new threads while tightening
- Automatically measures bolt elongation
Explanation
Correct Answer
A:Best answer. A ratchet drives in one direction and resets in the other.
Incorrect Answers
B:Not best. Changes bolt metal chemistry: A wrench applies torque only.
C:Not best. Cuts new threads while tightening: Threading requires taps/dies.
D:Not best. Automatically measures bolt elongation: A normal ratchet is not a strain gauge.
Question 522
What is an Allen key designed to engage?
- Hexagonal socket recess
- Torx star recess exclusively
- Slotted screw head exclusively
- External hex nut flats
Explanation
Correct Answer
A:Best answer. An Allen key fits internal hex fasteners. This is the concept directly requested by the question.
Incorrect Answers
B:Not best. Torx star recess exclusively: Torx bits have star profiles.
C:Not best. Slotted screw head exclusively: A flat screwdriver fits slots.
D:Not best. External hex nut flats: Open-end or box wrenches engage external flats.
Question 523
What is a Torx driver used with?
- Square-drive recesses only
- Six-lobed star-shaped recesses
- Phillips cross recesses only
- Smooth unthreaded shafts
Explanation
Correct Answer
B:Best answer. Torx bits match the specified drive recess.
Incorrect Answers
A:Not best. Square-drive recesses only: Robertson bits engage square recesses.
C:Not best. Phillips cross recesses only: Phillips bits fit cross heads.
D:Not best. Smooth unthreaded shafts: Drivers engage fasteners with recesses.
Question 524
What does a Robertson screwdriver bit fit?
- Hexagon socket
- Square recess fastener
- Plain round shaft
- Six-lobed recess
Explanation
Correct Answer
B:Best answer. Robertson drives have square sockets. This is the concept directly requested by the question.
Incorrect Answers
A:Not best. Hexagon socket: Allen keys fit hex sockets. It does not meet the specific requirement in the question.
C:Not best. Plain round shaft: A screwdriver needs a drive recess.
D:Not best. Six-lobed recess: Torx fits six-lobed sockets.
Question 525
Why does a correct-size screwdriver tip matter?
- It reduces slipping and damage to the head
- It increases battery voltage
- It eliminates the need for any hand safety
- It changes thread direction
Explanation
Correct Answer
A:Best answer. Matched tips engage the recess more effectively.
Incorrect Answers
B:Not best. It increases battery voltage: A screwdriver cannot regulate voltage.
C:Not best. It eliminates the need for any hand safety: Proper tool use still matters.
D:Not best. It changes thread direction: Screw thread hand is fixed.
Question 526
What distinguishes a self-tapping screw?
- It requires no rotation whatsoever
- It forms mating threads as installed in suitable material
- It always acts as a welding electrode
- It works only in glass
Explanation
Correct Answer
B:Best answer. A self-tapping fastener can create its own receiving thread.
Incorrect Answers
A:Not best. It requires no rotation whatsoever: Threaded fasteners rotate into place.
C:Not best. It always acts as a welding electrode: Screws and welds are separate joining methods.
D:Not best. It works only in glass: Many metals/plastics can accept them.
Question 527
What does a lock washer or locking nut help resist?
- All corrosion without coatings
- Electrical arcing in any circuit
- Expansion of metal to infinity
- Unintentional loosening from vibration
Explanation
Correct Answer
D:Best answer. Locking features maintain fastening integrity.
Incorrect Answers
A:Not best. All corrosion without coatings: Corrosion requires material/environment control.
B:Not best. Electrical arcing in any circuit: A washer is not universal arc protection.
C:Not best. Expansion of metal to infinity: Fasteners cannot stop thermal expansion completely.
Question 528
What is torque in fastener tightening?
- Twisting moment applied about an axis
- Force divided by time
- Electrical resistance
- Fluid density
Explanation
Correct Answer
A:Best answer. Torque is force multiplied by lever arm perpendicular distance.
Incorrect Answers
B:Not best. Force divided by time: That resembles rate of force change.
C:Not best. Electrical resistance: Resistance uses ohms. It does not meet the specific requirement in the question.
D:Not best. Fluid density: Density is mass per volume. It does not meet the specific requirement in the question.
Question 529
Why must different materials have suitable welding filler and procedure?
- Metallurgical compatibility and joint integrity
- Welding has no heat-affected zone
- Surface color alone ensures strength
- All metals melt at the same temperature
Explanation
Correct Answer
A:Best answer. Filler/process selection affects weld strength and cracking risk.
Incorrect Answers
B:Not best. Welding has no heat-affected zone: Heat can alter surrounding material.
C:Not best. Surface color alone ensures strength: Joint properties depend on more than appearance.
D:Not best. All metals melt at the same temperature: Metals have different melting and properties.
Question 530
What is the basic role of shielding gas in common gas-shielded arc welding?
- Turn base metal into plastic
- Make the electrode permanently cold
- Remove the need for eye protection
- Limit contamination of molten metal from atmosphere
Explanation
Correct Answer
D:Best answer. Shielding reduces oxidation and undesirable reactions.
Incorrect Answers
A:Not best. Turn base metal into plastic: Shield gas does not change metal into polymer.
B:Not best. Make the electrode permanently cold: Arc welding generates heat.
C:Not best. Remove the need for eye protection: Welding arcs require protection.