Test Prep ASVAB Test Practice Test 49
Question 480
What is a common symptom of misfiring in a running engine?
- Tires becoming overinflated
- Rough operation and reduced power
- Brake rotor rust disappearing
- Smooth idle with no vibration always
Explanation
Correct Answer
B:Best answer. A cylinder failing to combust reliably causes uneven torque.
Incorrect Answers
A:Not best. Tires becoming overinflated: Combustion does not change tire pressure directly.
C:Not best. Brake rotor rust disappearing: This is unrelated.
D:Not best. Smooth idle with no vibration always: Misfire normally disrupts smoothness.
Question 481
What does the cabin air filter mainly clean?
- Brake fluid in the reservoir
- Engine fuel before injection
- Air entering the passenger compartment
- Engine oil after combustion
Explanation
Correct Answer
C:Best answer. It traps airborne debris from ventilation flow.
Incorrect Answers
A:Not best. Brake fluid in the reservoir: It does not filter brakes.
B:Not best. Engine fuel before injection: Fuel filters clean gasoline/diesel.
D:Not best. Engine oil after combustion: Oil filters handle lubricant.
Question 482
How can low engine oil pressure harm an engine?
- It can reduce lubrication of heavily loaded bearings
- It prevents all cooling system leaks
- It directly increases tire tread depth
- It automatically charges the battery faster
Explanation
Correct Answer
A:Best answer. Bearings rely on adequate oil films. This is the concept directly requested by the question.
Incorrect Answers
B:Not best. It prevents all cooling system leaks: Oil pressure does not seal coolant hoses.
C:Not best. It directly increases tire tread depth: Oil pressure does not change tire rubber.
D:Not best. It automatically charges the battery faster: Charging is controlled elsewhere.
Question 483
Why are wheel bearings important?
- They meter air-fuel mixture
- They create spark voltage
- They allow wheels to rotate with low friction while carrying load
- They filter incoming cabin air
Explanation
Correct Answer
C:Best answer. Bearings support rolling wheel assemblies.
Incorrect Answers
A:Not best. They meter air-fuel mixture: Fuel systems meter combustion charge.
B:Not best. They create spark voltage: Ignition coils do that.
D:Not best. They filter incoming cabin air: Cabin filters handle ventilation.
Question 484
What does a MAP sensor typically measure?
- Engine oil filter restriction solely
- Wheel toe angle directly
- Intake manifold absolute pressure
- Brake pad surface area
Explanation
Correct Answer
C:Best answer. The controller uses manifold pressure as a load input.
Incorrect Answers
A:Not best. Engine oil filter restriction solely: A MAP sensor is not an oil sensor.
B:Not best. Wheel toe angle directly: Alignment tools measure toe.
D:Not best. Brake pad surface area: Brake parts are separate.
Question 485
What is the main role of an automatic engine idle control strategy?
- Replace hydraulic brake assistance
- Increase engine displacement during idle
- Maintain target idle speed as loads change
- Change tire sidewall size
Explanation
Correct Answer
C:Best answer. Controllers adjust air/torque for stable idle.
Incorrect Answers
A:Not best. Replace hydraulic brake assistance: Brakes are separate.
B:Not best. Increase engine displacement during idle: Displacement is fixed mechanically.
D:Not best. Change tire sidewall size: Idle control cannot alter tires.
Question 486
What does a fuel pump provide in a modern injected engine?
- Coolant flow through thermostat
- Fuel flow at required pressure
- Electrical charge for battery
- Brake-fluid pressure at calipers
Explanation
Correct Answer
B:Best answer. The pump supplies injectors through fuel lines.
Incorrect Answers
A:Not best. Coolant flow through thermostat: Water pumps provide coolant circulation.
C:Not best. Electrical charge for battery: Charging systems generate electricity.
D:Not best. Brake-fluid pressure at calipers: The brake master cylinder supplies brakes.
Question 487
What is the purpose of a PCV system?
- Cool the automatic transmission only
- Adjust front-wheel toe
- Ventilate crankcase vapors into the intake for controlled burning
- Increase radiator cap pressure indefinitely
Explanation
Correct Answer
C:Best answer. Positive crankcase ventilation limits emissions and pressure buildup.
Incorrect Answers
A:Not best. Cool the automatic transmission only: Transmission coolers handle ATF.
B:Not best. Adjust front-wheel toe: Steering linkage governs toe.
D:Not best. Increase radiator cap pressure indefinitely: It does not regulate coolant cap.
Question 488
What does a diesel engine primarily use to ignite injected fuel?
- Spark plugs in every cylinder as the sole igniter
- A carburetor flame
- Heat from compressed air
- An external torch in normal operation
Explanation
Correct Answer
C:Best answer. Compression ignition raises air temperature enough for fuel combustion.
Incorrect Answers
A:Not best. Spark plugs in every cylinder as the sole igniter: Diesels primarily rely on compression heating.
B:Not best. A carburetor flame: Fuel injection occurs into hot compressed air.
D:Not best. An external torch in normal operation: Regular diesel combustion does not use a torch.
Question 489
What is the function of glow plugs in many diesel engines?
- Aid cold starting by warming combustion chambers
- Pressurize coolant
- Spark every power stroke like gasoline plugs
- Act as brake wear sensors
Explanation
Correct Answer
A:Best answer. Glow plugs help ignition in cold conditions.
Incorrect Answers
B:Not best. Pressurize coolant: They are electrical heaters.
C:Not best. Spark every power stroke like gasoline plugs: Diesel ignition is not normally spark-initiated.
D:Not best. Act as brake wear sensors: They sit in the engine.
Question 490
What is the principal function of a vehicle's traction-control system?
- Reduce excessive driven-wheel spin during acceleration
- Increase tire radius
- Replace the engine cooling fan
- Make the vehicle stop in any distance
Explanation
Correct Answer
A:Best answer. Traction control can limit torque or brake slipping wheels to restore grip.
Incorrect Answers
B:Not best. Increase tire radius: Electronic control does not alter tire geometry.
C:Not best. Replace the engine cooling fan: Cooling and traction systems serve distinct functions.
D:Not best. Make the vehicle stop in any distance: Stopping distance still depends on conditions.