Pure Storage FlashArray Implementation Specialist Practice Test 43
Question 420
An enterprise change review is deciding whether its response to privileged local account handoff has been justified. The fictional case facts are: A hospital's only verified admin account belongs to a temporary engineer whose contract ends tomorrow. The review needs three separate components: a sound FlashArray administration principle, a scoped authorized response, and an independent measurable success check. Choose EXACTLY THREE statements that fulfill those roles.
- Rotate or disable temporary credentials and establish least-privilege named ownership after initial setup.
- Commissioning must restrict privileged accounts to authorized implementation staff and establish customer-owned custody.
- Recorded service names resolve and system time remains within approved drift tolerance.
- Use the corresponding installation steps; stop rather than improvise a different model's slot arrangement.
- The customer can authenticate with intended roles, while temporary installer credentials are no longer active.
- Array initialization must use the signed management network values with correct subnet and gateway consistency.
Explanation
Correct Answer
A:A hospital's only verified admin account belongs to a temporary engineer whose contract ends tomorrow. Rotate or disable temporary credentials and establish least-privilege named ownership after initial setup. Verify the change by checking: The customer can authenticate with intended roles, while temporary installer credentials are no longer active. The action implements this principle: Commissioning must restrict privileged accounts to authorized implementation staff and establish customer-owned custody.
B:Commissioning must restrict privileged accounts to authorized implementation staff and establish customer-owned custody. A hospital's only verified admin account belongs to a temporary engineer whose contract ends tomorrow. The comparison to make is: Review installer account roles, shared-token inventory and approved customer access handoff checklist. That principle leads to a bounded response: Rotate or disable temporary credentials and establish least-privilege named ownership after initial setup.
E:The customer can authenticate with intended roles, while temporary installer credentials are no longer active. This shows whether the scoped response worked: Rotate or disable temporary credentials and establish least-privilege named ownership after initial setup. A hospital's only verified admin account belongs to a temporary engineer whose contract ends tomorrow. The result should be supported by this evidence: Review installer account roles, shared-token inventory and approved customer access handoff checklist.
Incorrect Answers
C:Recorded service names resolve and system time remains within approved drift tolerance. That outcome tests a separate time configuration at first startup concern, not whether the reported problem is fixed: A hospital's only verified admin account belongs to a temporary engineer whose contract ends tomorrow. A directly relevant result would be: The customer can authenticate with intended roles, while temporary installer credentials are no longer active. The acceptance test needs evidence from: Review installer account roles, shared-token inventory and approved customer access handoff checklist.
D:Use the corresponding installation steps; stop rather than improvise a different model's slot arrangement. That change targets a separate chassis and controller hardware identity concern; the unresolved issue is: A hospital's only verified admin account belongs to a temporary engineer whose contract ends tomorrow. The scoped response is: Rotate or disable temporary credentials and establish least-privilege named ownership after initial setup. The action should implement: Commissioning must restrict privileged accounts to authorized implementation staff and establish customer-owned custody.
F:Array initialization must use the signed management network values with correct subnet and gateway consistency. That is a separate ip initialization and subnet masks concern; it does not explain the case: A hospital's only verified admin account belongs to a temporary engineer whose contract ends tomorrow. The governing distinction here is: Commissioning must restrict privileged accounts to authorized implementation staff and establish customer-owned custody. The governing rule must instead lead to: Rotate or disable temporary credentials and establish least-privilege named ownership after initial setup.
Question 421
A hypothetical FlashArray operations change concerns ip initialization and subnet masks in the Installation area. The change or incident record reports: A logistics site has a management address that responds locally but cannot reach central operations. Before modifying any FlashArray object, the administrator must identify the defensible operating principle. Which ONE governing principle directly applies? Choose ONE answer.
- Array initialization must use the signed management network values with correct subnet and gateway consistency.
- Physical installation should verify each PSU is seated, powered and wired to the intended independent feed.
- Registration for cloud telemetry must comply with customer policy and prove the intended network path works.
- A shelf added at installation must be discovered and admitted using the supported hardware procedure and inventory identity.
Explanation
Correct Answer
A:Array initialization must use the signed management network values with correct subnet and gateway consistency. A logistics site has a management address that responds locally but cannot reach central operations. The comparison to make is: Check console-displayed configuration, network worksheet and direct ping or route tests from approved sources.
Incorrect Answers
B:Physical installation should verify each PSU is seated, powered and wired to the intended independent feed. That is a separate redundant power supply physical verification concern; it does not explain the case: A logistics site has a management address that responds locally but cannot reach central operations. The governing distinction here is: Array initialization must use the signed management network values with correct subnet and gateway consistency.
C:Registration for cloud telemetry must comply with customer policy and prove the intended network path works. That is a separate pure1 registration and telemetry authorization concern; it does not explain the case: A logistics site has a management address that responds locally but cannot reach central operations. The governing distinction here is: Array initialization must use the signed management network values with correct subnet and gateway consistency.
D:A shelf added at installation must be discovered and admitted using the supported hardware procedure and inventory identity. That is a separate directflash shelf admission and identity concern; it does not explain the case: A logistics site has a management address that responds locally but cannot reach central operations. The governing distinction here is: Array initialization must use the signed management network values with correct subnet and gateway consistency.
Question 422
During FlashArray administration concerning ip initialization and subnet masks, an operator reviews this fictional service issue: A logistics site has a management address that responds locally but cannot reach central operations. Several explanations remain plausible until the relevant configuration and runtime evidence are checked. Which ONE specific evidence package should the administrator examine before deciding the change or diagnosis? Choose ONE answer.
- Inspect management port labels, switch destinations and the approved dual-controller cabling diagram.
- Compare optical module specifications, connector type, speed settings and live link diagnostics.
- Check console-displayed configuration, network worksheet and direct ping or route tests from approved sources.
- Compare component indicator states and system health inventory to the current installation guide.
Explanation
Correct Answer
C:A logistics site has a management address that responds locally but cannot reach central operations. Check console-displayed configuration, network worksheet and direct ping or route tests from approved sources. These observations test the rule: Array initialization must use the signed management network values with correct subnet and gateway consistency.
Incorrect Answers
A:Inspect management port labels, switch destinations and the approved dual-controller cabling diagram. Those checks address a separate dual-controller management cabling concern, not the specific finding: A logistics site has a management address that responds locally but cannot reach central operations. The useful observations are: Check console-displayed configuration, network worksheet and direct ping or route tests from approved sources.
B:Compare optical module specifications, connector type, speed settings and live link diagnostics. Those checks address a separate ethernet optics matching concern, not the specific finding: A logistics site has a management address that responds locally but cannot reach central operations. The useful observations are: Check console-displayed configuration, network worksheet and direct ping or route tests from approved sources.
D:Compare component indicator states and system health inventory to the current installation guide. Those checks address a separate initial controller and enclosure status lights concern, not the specific finding: A logistics site has a management address that responds locally but cannot reach central operations. The useful observations are: Check console-displayed configuration, network worksheet and direct ping or route tests from approved sources.
Question 423
A change manager requests a safe and limited FlashArray response to a Installation problem involving ip initialization and subnet masks. The reported situation is: A logistics site has a management address that responds locally but cannot reach central operations. The change must follow the observed facts, preserve recovery capability and avoid unrelated service impact. Which ONE bounded administrative action best matches this case? Choose ONE answer.
- Apply approved DNS/NTP settings and recheck dependent services.
- Correct the exact management network settings after network-owner confirmation.
- Fit the approved blanking pieces and restore the intended airflow path before production load.
- Correct any specific physical mismatch and rerun the vendor-aligned connection verification.
Explanation
Correct Answer
B:A logistics site has a management address that responds locally but cannot reach central operations. Correct the exact management network settings after network-owner confirmation. Verify the change by checking: The intended management endpoint is reachable only through the approved route and matches the signed worksheet.
Incorrect Answers
A:Apply approved DNS/NTP settings and recheck dependent services. That change targets a separate time configuration at first startup concern; the unresolved issue is: A logistics site has a management address that responds locally but cannot reach central operations. The scoped response is: Correct the exact management network settings after network-owner confirmation.
C:Fit the approved blanking pieces and restore the intended airflow path before production load. That change targets a separate blanking and airflow integrity concern; the unresolved issue is: A logistics site has a management address that responds locally but cannot reach central operations. The scoped response is: Correct the exact management network settings after network-owner confirmation.
D:Correct any specific physical mismatch and rerun the vendor-aligned connection verification. That change targets a separate post-cabling controller and shelf link verification concern; the unresolved issue is: A logistics site has a management address that responds locally but cannot reach central operations. The scoped response is: Correct the exact management network settings after network-owner confirmation.
Question 424
Two independent FlashArray administrator reviewers discuss ip initialization and subnet masks. Their case record says: A logistics site has a management address that responds locally but cannot reach central operations. One requires diagnostic evidence that can distinguish the actual issue from lookalike symptoms; the other requires a limited and approved remediation. Choose EXACTLY TWO statements that jointly provide those roles.
- Correct the exact management network settings after network-owner confirmation.
- Inspect PSU status, feed labels, power alarms and power-circuit mapping.
- Check console-displayed configuration, network worksheet and direct ping or route tests from approved sources.
- Pause rack work until the approved lift method and mounting personnel are present.
- Inspect host multipath device state, each initiator-target connection and failover behavior.
Explanation
Correct Answer
A:A logistics site has a management address that responds locally but cannot reach central operations. Correct the exact management network settings after network-owner confirmation. Verify the change by checking: The intended management endpoint is reachable only through the approved route and matches the signed worksheet. The change should follow this observation: Check console-displayed configuration, network worksheet and direct ping or route tests from approved sources.
C:A logistics site has a management address that responds locally but cannot reach central operations. Check console-displayed configuration, network worksheet and direct ping or route tests from approved sources. These observations test the rule: Array initialization must use the signed management network values with correct subnet and gateway consistency. The evidence supports this limited action: Correct the exact management network settings after network-owner confirmation.
Incorrect Answers
B:Inspect PSU status, feed labels, power alarms and power-circuit mapping. Those checks address a separate redundant power supply physical verification concern, not the specific finding: A logistics site has a management address that responds locally but cannot reach central operations. The useful observations are: Check console-displayed configuration, network worksheet and direct ping or route tests from approved sources. The relevant observation must instead support: Correct the exact management network settings after network-owner confirmation.
D:Pause rack work until the approved lift method and mounting personnel are present. That change targets a separate load-assisted chassis mounting concern; the unresolved issue is: A logistics site has a management address that responds locally but cannot reach central operations. The scoped response is: Correct the exact management network settings after network-owner confirmation. The authorized change must instead follow: Check console-displayed configuration, network worksheet and direct ping or route tests from approved sources.
E:Inspect host multipath device state, each initiator-target connection and failover behavior. Those checks address a separate multipath configuration after presentation concern, not the specific finding: A logistics site has a management address that responds locally but cannot reach central operations. The useful observations are: Check console-displayed configuration, network worksheet and direct ping or route tests from approved sources. The relevant observation must instead support: Correct the exact management network settings after network-owner confirmation.
Question 425
An enterprise change review is deciding whether its response to ip initialization and subnet masks has been justified. The fictional case facts are: A logistics site has a management address that responds locally but cannot reach central operations. The review needs three separate components: a sound FlashArray administration principle, a scoped authorized response, and an independent measurable success check. Choose EXACTLY THREE statements that fulfill those roles.
- Correct the exact management network settings after network-owner confirmation.
- Hosts see expected target identities through each designated FC fabric.
- The intended management endpoint is reachable only through the approved route and matches the signed worksheet.
- Correct the as-built labels before accepting the implementation.
- A shelf added at installation must be discovered and admitted using the supported hardware procedure and inventory identity.
- Array initialization must use the signed management network values with correct subnet and gateway consistency.
Explanation
Correct Answer
A:A logistics site has a management address that responds locally but cannot reach central operations. Correct the exact management network settings after network-owner confirmation. Verify the change by checking: The intended management endpoint is reachable only through the approved route and matches the signed worksheet. The action implements this principle: Array initialization must use the signed management network values with correct subnet and gateway consistency.
C:The intended management endpoint is reachable only through the approved route and matches the signed worksheet. This shows whether the scoped response worked: Correct the exact management network settings after network-owner confirmation. A logistics site has a management address that responds locally but cannot reach central operations. The result should be supported by this evidence: Check console-displayed configuration, network worksheet and direct ping or route tests from approved sources.
F:Array initialization must use the signed management network values with correct subnet and gateway consistency. A logistics site has a management address that responds locally but cannot reach central operations. The comparison to make is: Check console-displayed configuration, network worksheet and direct ping or route tests from approved sources. That principle leads to a bounded response: Correct the exact management network settings after network-owner confirmation.
Incorrect Answers
B:Hosts see expected target identities through each designated FC fabric. That outcome tests a separate fibre channel target-port cabling concern, not whether the reported problem is fixed: A logistics site has a management address that responds locally but cannot reach central operations. A directly relevant result would be: The intended management endpoint is reachable only through the approved route and matches the signed worksheet. The acceptance test needs evidence from: Check console-displayed configuration, network worksheet and direct ping or route tests from approved sources.
D:Correct the as-built labels before accepting the implementation. That change targets a separate rack labels and asset identification concern; the unresolved issue is: A logistics site has a management address that responds locally but cannot reach central operations. The scoped response is: Correct the exact management network settings after network-owner confirmation. The action should implement: Array initialization must use the signed management network values with correct subnet and gateway consistency.
E:A shelf added at installation must be discovered and admitted using the supported hardware procedure and inventory identity. That is a separate directflash shelf admission and identity concern; it does not explain the case: A logistics site has a management address that responds locally but cannot reach central operations. The governing distinction here is: Array initialization must use the signed management network values with correct subnet and gateway consistency. The governing rule must instead lead to: Correct the exact management network settings after network-owner confirmation.
Question 426
A hypothetical FlashArray operations change concerns ip initialization and subnet masks in the Installation area. The change or incident record reports: A new rack is on the right VLAN yet the configured gateway belongs to a different subnet. Before modifying any FlashArray object, the administrator must identify the defensible operating principle. Which ONE governing principle directly applies? Choose ONE answer.
- Commissioning must restrict privileged accounts to authorized implementation staff and establish customer-owned custody.
- Physical chassis, shelf and cable labeling should unambiguously match asset, service and support records.
- Array initialization must use the signed management network values with correct subnet and gateway consistency.
- A chassis must be lifted and seated by trained staff with suitable handling equipment, not balanced on temporary supports.
Explanation
Correct Answer
C:Array initialization must use the signed management network values with correct subnet and gateway consistency. A new rack is on the right VLAN yet the configured gateway belongs to a different subnet. The comparison to make is: Check console-displayed configuration, network worksheet and direct ping or route tests from approved sources.
Incorrect Answers
A:Commissioning must restrict privileged accounts to authorized implementation staff and establish customer-owned custody. That is a separate privileged local account handoff concern; it does not explain the case: A new rack is on the right VLAN yet the configured gateway belongs to a different subnet. The governing distinction here is: Array initialization must use the signed management network values with correct subnet and gateway consistency.
B:Physical chassis, shelf and cable labeling should unambiguously match asset, service and support records. That is a separate rack labels and asset identification concern; it does not explain the case: A new rack is on the right VLAN yet the configured gateway belongs to a different subnet. The governing distinction here is: Array initialization must use the signed management network values with correct subnet and gateway consistency.
D:A chassis must be lifted and seated by trained staff with suitable handling equipment, not balanced on temporary supports. That is a separate load-assisted chassis mounting concern; it does not explain the case: A new rack is on the right VLAN yet the configured gateway belongs to a different subnet. The governing distinction here is: Array initialization must use the signed management network values with correct subnet and gateway consistency.
Question 427
During FlashArray administration concerning ip initialization and subnet masks, an operator reviews this fictional service issue: A new rack is on the right VLAN yet the configured gateway belongs to a different subnet. Several explanations remain plausible until the relevant configuration and runtime evidence are checked. Which ONE specific evidence package should the administrator examine before deciding the change or diagnosis? Choose ONE answer.
- Compare array serial label, cabinet position and port markers with the handoff inventory.
- Check console-displayed configuration, network worksheet and direct ping or route tests from approved sources.
- Inspect management port labels, switch destinations and the approved dual-controller cabling diagram.
- Compare currently installed Purity version, supported target image and downloaded package checksum.
Explanation
Correct Answer
B:A new rack is on the right VLAN yet the configured gateway belongs to a different subnet. Check console-displayed configuration, network worksheet and direct ping or route tests from approved sources. These observations test the rule: Array initialization must use the signed management network values with correct subnet and gateway consistency.
Incorrect Answers
A:Compare array serial label, cabinet position and port markers with the handoff inventory. Those checks address a separate rack labels and asset identification concern, not the specific finding: A new rack is on the right VLAN yet the configured gateway belongs to a different subnet. The useful observations are: Check console-displayed configuration, network worksheet and direct ping or route tests from approved sources.
C:Inspect management port labels, switch destinations and the approved dual-controller cabling diagram. Those checks address a separate dual-controller management cabling concern, not the specific finding: A new rack is on the right VLAN yet the configured gateway belongs to a different subnet. The useful observations are: Check console-displayed configuration, network worksheet and direct ping or route tests from approved sources.
D:Compare currently installed Purity version, supported target image and downloaded package checksum. Those checks address a separate purity software staging on newly installed hardware concern, not the specific finding: A new rack is on the right VLAN yet the configured gateway belongs to a different subnet. The useful observations are: Check console-displayed configuration, network worksheet and direct ping or route tests from approved sources.
Question 428
A change manager requests a safe and limited FlashArray response to a Installation problem involving ip initialization and subnet masks. The reported situation is: A new rack is on the right VLAN yet the configured gateway belongs to a different subnet. The change must follow the observed facts, preserve recovery capability and avoid unrelated service impact. Which ONE bounded administrative action best matches this case? Choose ONE answer.
- Complete the approved registration workflow or document the supported restricted-site exception.
- Move incorrect patching to approved target interfaces and retest with the network owner.
- Correct the exact management network settings after network-owner confirmation.
- Recable the identified management connections through the reviewed, labeled network plan.
Explanation
Correct Answer
C:A new rack is on the right VLAN yet the configured gateway belongs to a different subnet. Correct the exact management network settings after network-owner confirmation. Verify the change by checking: The intended management endpoint is reachable only through the approved route and matches the signed worksheet.
Incorrect Answers
A:Complete the approved registration workflow or document the supported restricted-site exception. That change targets a separate pure1 registration and telemetry authorization concern; the unresolved issue is: A new rack is on the right VLAN yet the configured gateway belongs to a different subnet. The scoped response is: Correct the exact management network settings after network-owner confirmation.
B:Move incorrect patching to approved target interfaces and retest with the network owner. That change targets a separate storage ethernet target-port role mapping concern; the unresolved issue is: A new rack is on the right VLAN yet the configured gateway belongs to a different subnet. The scoped response is: Correct the exact management network settings after network-owner confirmation.
D:Recable the identified management connections through the reviewed, labeled network plan. That change targets a separate dual-controller management cabling concern; the unresolved issue is: A new rack is on the right VLAN yet the configured gateway belongs to a different subnet. The scoped response is: Correct the exact management network settings after network-owner confirmation.
Question 429
Two independent FlashArray administrator reviewers discuss ip initialization and subnet masks. Their case record says: A new rack is on the right VLAN yet the configured gateway belongs to a different subnet. One requires diagnostic evidence that can distinguish the actual issue from lookalike symptoms; the other requires a limited and approved remediation. Choose EXACTLY TWO statements that jointly provide those roles.
- Read hardware labels, model-specific component map and matching supported procedure.
- Correct the exact management network settings after network-owner confirmation.
- Check console-displayed configuration, network worksheet and direct ping or route tests from approved sources.
- Complete the approved registration workflow or document the supported restricted-site exception.
- Compare currently installed Purity version, supported target image and downloaded package checksum.
Explanation
Correct Answer
B:A new rack is on the right VLAN yet the configured gateway belongs to a different subnet. Correct the exact management network settings after network-owner confirmation. Verify the change by checking: The intended management endpoint is reachable only through the approved route and matches the signed worksheet. The change should follow this observation: Check console-displayed configuration, network worksheet and direct ping or route tests from approved sources.
C:A new rack is on the right VLAN yet the configured gateway belongs to a different subnet. Check console-displayed configuration, network worksheet and direct ping or route tests from approved sources. These observations test the rule: Array initialization must use the signed management network values with correct subnet and gateway consistency. The evidence supports this limited action: Correct the exact management network settings after network-owner confirmation.
Incorrect Answers
A:Read hardware labels, model-specific component map and matching supported procedure. Those checks address a separate chassis and controller hardware identity concern, not the specific finding: A new rack is on the right VLAN yet the configured gateway belongs to a different subnet. The useful observations are: Check console-displayed configuration, network worksheet and direct ping or route tests from approved sources. The relevant observation must instead support: Correct the exact management network settings after network-owner confirmation.
D:Complete the approved registration workflow or document the supported restricted-site exception. That change targets a separate pure1 registration and telemetry authorization concern; the unresolved issue is: A new rack is on the right VLAN yet the configured gateway belongs to a different subnet. The scoped response is: Correct the exact management network settings after network-owner confirmation. The authorized change must instead follow: Check console-displayed configuration, network worksheet and direct ping or route tests from approved sources.
E:Compare currently installed Purity version, supported target image and downloaded package checksum. Those checks address a separate purity software staging on newly installed hardware concern, not the specific finding: A new rack is on the right VLAN yet the configured gateway belongs to a different subnet. The useful observations are: Check console-displayed configuration, network worksheet and direct ping or route tests from approved sources. The relevant observation must instead support: Correct the exact management network settings after network-owner confirmation.
Question 430
An enterprise change review is deciding whether its response to ip initialization and subnet masks has been justified. The fictional case facts are: A new rack is on the right VLAN yet the configured gateway belongs to a different subnet. The review needs three separate components: a sound FlashArray administration principle, a scoped authorized response, and an independent measurable success check. Choose EXACTLY THREE statements that fulfill those roles.
- Array initialization must use the signed management network values with correct subnet and gateway consistency.
- External shelf connections must follow the model-specific supported topology and cable placement rather than a convenient daisy chain.
- The array boots into a supported specified release and health checks show no new faults.
- The intended management endpoint is reachable only through the approved route and matches the signed worksheet.
- Fit the approved blanking pieces and restore the intended airflow path before production load.
- Correct the exact management network settings after network-owner confirmation.
Explanation
Correct Answer
A:Array initialization must use the signed management network values with correct subnet and gateway consistency. A new rack is on the right VLAN yet the configured gateway belongs to a different subnet. The comparison to make is: Check console-displayed configuration, network worksheet and direct ping or route tests from approved sources. That principle leads to a bounded response: Correct the exact management network settings after network-owner confirmation.
D:The intended management endpoint is reachable only through the approved route and matches the signed worksheet. This shows whether the scoped response worked: Correct the exact management network settings after network-owner confirmation. A new rack is on the right VLAN yet the configured gateway belongs to a different subnet. The result should be supported by this evidence: Check console-displayed configuration, network worksheet and direct ping or route tests from approved sources.
F:A new rack is on the right VLAN yet the configured gateway belongs to a different subnet. Correct the exact management network settings after network-owner confirmation. Verify the change by checking: The intended management endpoint is reachable only through the approved route and matches the signed worksheet. The action implements this principle: Array initialization must use the signed management network values with correct subnet and gateway consistency.
Incorrect Answers
B:External shelf connections must follow the model-specific supported topology and cable placement rather than a convenient daisy chain. That is a separate directflash shelf supported topology concern; it does not explain the case: A new rack is on the right VLAN yet the configured gateway belongs to a different subnet. The governing distinction here is: Array initialization must use the signed management network values with correct subnet and gateway consistency. The governing rule must instead lead to: Correct the exact management network settings after network-owner confirmation.
C:The array boots into a supported specified release and health checks show no new faults. That outcome tests a separate purity software staging on newly installed hardware concern, not whether the reported problem is fixed: A new rack is on the right VLAN yet the configured gateway belongs to a different subnet. A directly relevant result would be: The intended management endpoint is reachable only through the approved route and matches the signed worksheet. The acceptance test needs evidence from: Check console-displayed configuration, network worksheet and direct ping or route tests from approved sources.
E:Fit the approved blanking pieces and restore the intended airflow path before production load. That change targets a separate blanking and airflow integrity concern; the unresolved issue is: A new rack is on the right VLAN yet the configured gateway belongs to a different subnet. The scoped response is: Correct the exact management network settings after network-owner confirmation. The action should implement: Array initialization must use the signed management network values with correct subnet and gateway consistency.