Pure Storage FlashArray Implementation Specialist Practice Test 45
Question 440
An enterprise change review is deciding whether its response to time configuration at first startup has been justified. The fictional case facts are: An installer attempts Fusion onboarding before configuring reachable time and name servers. The review needs three separate components: a sound FlashArray administration principle, a scoped authorized response, and an independent measurable success check. Choose EXACTLY THREE statements that fulfill those roles.
- Apply approved DNS/NTP settings and recheck dependent services.
- Time and name services should be configured and validated before security-sensitive fleet integrations.
- Fleet onboarding should use the supported software baseline, connectivity and role assignments before combining arrays.
- The authorized customer account recognizes the intended serial and telemetry path, or a signed offline procedure is documented.
- Resolve any identified seating, cabling or power fault before declaring chassis commissioning complete.
- Recorded service names resolve and system time remains within approved drift tolerance.
Explanation
Correct Answer
A:An installer attempts Fusion onboarding before configuring reachable time and name servers. Apply approved DNS/NTP settings and recheck dependent services. Verify the change by checking: Recorded service names resolve and system time remains within approved drift tolerance. The action implements this principle: Time and name services should be configured and validated before security-sensitive fleet integrations.
B:Time and name services should be configured and validated before security-sensitive fleet integrations. An installer attempts Fusion onboarding before configuring reachable time and name servers. The comparison to make is: Inspect NTP synchronization state, resolver list and service reachability after initial boot. That principle leads to a bounded response: Apply approved DNS/NTP settings and recheck dependent services.
F:Recorded service names resolve and system time remains within approved drift tolerance. This shows whether the scoped response worked: Apply approved DNS/NTP settings and recheck dependent services. An installer attempts Fusion onboarding before configuring reachable time and name servers. The result should be supported by this evidence: Inspect NTP synchronization state, resolver list and service reachability after initial boot.
Incorrect Answers
C:Fleet onboarding should use the supported software baseline, connectivity and role assignments before combining arrays. That is a separate pure fusion fleet prerequisites concern; it does not explain the case: An installer attempts Fusion onboarding before configuring reachable time and name servers. The governing distinction here is: Time and name services should be configured and validated before security-sensitive fleet integrations. The governing rule must instead lead to: Apply approved DNS/NTP settings and recheck dependent services.
D:The authorized customer account recognizes the intended serial and telemetry path, or a signed offline procedure is documented. That outcome tests a separate pure1 registration and telemetry authorization concern, not whether the reported problem is fixed: An installer attempts Fusion onboarding before configuring reachable time and name servers. A directly relevant result would be: Recorded service names resolve and system time remains within approved drift tolerance. The acceptance test needs evidence from: Inspect NTP synchronization state, resolver list and service reachability after initial boot.
E:Resolve any identified seating, cabling or power fault before declaring chassis commissioning complete. That change targets a separate initial controller and enclosure status lights concern; the unresolved issue is: An installer attempts Fusion onboarding before configuring reachable time and name servers. The scoped response is: Apply approved DNS/NTP settings and recheck dependent services. The action should implement: Time and name services should be configured and validated before security-sensitive fleet integrations.
Question 441
A hypothetical FlashArray operations change concerns pure1 registration and telemetry authorization in the Installation area. The change or incident record reports: A regulated finance site must use an approved proxy before its first Pure1 registration. Before modifying any FlashArray object, the administrator must identify the defensible operating principle. Which ONE governing principle directly applies? Choose ONE answer.
- External shelf connections must follow the model-specific supported topology and cable placement rather than a convenient daisy chain.
- Commissioning must restrict privileged accounts to authorized implementation staff and establish customer-owned custody.
- A shelf added at installation must be discovered and admitted using the supported hardware procedure and inventory identity.
- Registration for cloud telemetry must comply with customer policy and prove the intended network path works.
Explanation
Correct Answer
D:Registration for cloud telemetry must comply with customer policy and prove the intended network path works. A regulated finance site must use an approved proxy before its first Pure1 registration. The comparison to make is: Check customer authorization, Pure1 identity, supported outbound route and verified service health.
Incorrect Answers
A:External shelf connections must follow the model-specific supported topology and cable placement rather than a convenient daisy chain. That is a separate directflash shelf supported topology concern; it does not explain the case: A regulated finance site must use an approved proxy before its first Pure1 registration. The governing distinction here is: Registration for cloud telemetry must comply with customer policy and prove the intended network path works.
B:Commissioning must restrict privileged accounts to authorized implementation staff and establish customer-owned custody. That is a separate privileged local account handoff concern; it does not explain the case: A regulated finance site must use an approved proxy before its first Pure1 registration. The governing distinction here is: Registration for cloud telemetry must comply with customer policy and prove the intended network path works.
C:A shelf added at installation must be discovered and admitted using the supported hardware procedure and inventory identity. That is a separate directflash shelf admission and identity concern; it does not explain the case: A regulated finance site must use an approved proxy before its first Pure1 registration. The governing distinction here is: Registration for cloud telemetry must comply with customer policy and prove the intended network path works.
Question 442
During FlashArray administration concerning pure1 registration and telemetry authorization, an operator reviews this fictional service issue: A regulated finance site must use an approved proxy before its first Pure1 registration. Several explanations remain plausible until the relevant configuration and runtime evidence are checked. Which ONE specific evidence package should the administrator examine before deciding the change or diagnosis? Choose ONE answer.
- Compare component indicator states and system health inventory to the current installation guide.
- Check customer authorization, Pure1 identity, supported outbound route and verified service health.
- Compare optical module specifications, connector type, speed settings and live link diagnostics.
- Compare live port-link state, controller connectivity and shelf paths with the approved as-built drawing.
Explanation
Correct Answer
B:A regulated finance site must use an approved proxy before its first Pure1 registration. Check customer authorization, Pure1 identity, supported outbound route and verified service health. These observations test the rule: Registration for cloud telemetry must comply with customer policy and prove the intended network path works.
Incorrect Answers
A:Compare component indicator states and system health inventory to the current installation guide. Those checks address a separate initial controller and enclosure status lights concern, not the specific finding: A regulated finance site must use an approved proxy before its first Pure1 registration. The useful observations are: Check customer authorization, Pure1 identity, supported outbound route and verified service health.
C:Compare optical module specifications, connector type, speed settings and live link diagnostics. Those checks address a separate ethernet optics matching concern, not the specific finding: A regulated finance site must use an approved proxy before its first Pure1 registration. The useful observations are: Check customer authorization, Pure1 identity, supported outbound route and verified service health.
D:Compare live port-link state, controller connectivity and shelf paths with the approved as-built drawing. Those checks address a separate post-cabling controller and shelf link verification concern, not the specific finding: A regulated finance site must use an approved proxy before its first Pure1 registration. The useful observations are: Check customer authorization, Pure1 identity, supported outbound route and verified service health.
Question 443
A change manager requests a safe and limited FlashArray response to a Installation problem involving pure1 registration and telemetry authorization. The reported situation is: A regulated finance site must use an approved proxy before its first Pure1 registration. The change must follow the observed facts, preserve recovery capability and avoid unrelated service impact. Which ONE bounded administrative action best matches this case? Choose ONE answer.
- Reroute and secure cabling with supported lengths and defined service clearance.
- Complete the approved registration workflow or document the supported restricted-site exception.
- Correct an unseated module or miswired power connection under approved electrical procedures.
- Resolve zoning, cabling or OS multipath gaps before approving application cutover.
Explanation
Correct Answer
B:A regulated finance site must use an approved proxy before its first Pure1 registration. Complete the approved registration workflow or document the supported restricted-site exception. Verify the change by checking: The authorized customer account recognizes the intended serial and telemetry path, or a signed offline procedure is documented.
Incorrect Answers
A:Reroute and secure cabling with supported lengths and defined service clearance. That change targets a separate cable strain relief and service loops concern; the unresolved issue is: A regulated finance site must use an approved proxy before its first Pure1 registration. The scoped response is: Complete the approved registration workflow or document the supported restricted-site exception.
C:Correct an unseated module or miswired power connection under approved electrical procedures. That change targets a separate redundant power supply physical verification concern; the unresolved issue is: A regulated finance site must use an approved proxy before its first Pure1 registration. The scoped response is: Complete the approved registration workflow or document the supported restricted-site exception.
D:Resolve zoning, cabling or OS multipath gaps before approving application cutover. That change targets a separate multipath configuration after presentation concern; the unresolved issue is: A regulated finance site must use an approved proxy before its first Pure1 registration. The scoped response is: Complete the approved registration workflow or document the supported restricted-site exception.
Question 444
Two independent FlashArray administrator reviewers discuss pure1 registration and telemetry authorization. Their case record says: A regulated finance site must use an approved proxy before its first Pure1 registration. One requires diagnostic evidence that can distinguish the actual issue from lookalike symptoms; the other requires a limited and approved remediation. Choose EXACTLY TWO statements that jointly provide those roles.
- Complete the approved registration workflow or document the supported restricted-site exception.
- Inspect target Purity versions, coordinator eligibility, security domains and fleet network reachability.
- Check customer authorization, Pure1 identity, supported outbound route and verified service health.
- Move incorrect patching to approved target interfaces and retest with the network owner.
- Compare host IQNs or WWPNs, access groups, intended volume mapping and application-owner approvals.
Explanation
Correct Answer
A:A regulated finance site must use an approved proxy before its first Pure1 registration. Complete the approved registration workflow or document the supported restricted-site exception. Verify the change by checking: The authorized customer account recognizes the intended serial and telemetry path, or a signed offline procedure is documented. The change should follow this observation: Check customer authorization, Pure1 identity, supported outbound route and verified service health.
C:A regulated finance site must use an approved proxy before its first Pure1 registration. Check customer authorization, Pure1 identity, supported outbound route and verified service health. These observations test the rule: Registration for cloud telemetry must comply with customer policy and prove the intended network path works. The evidence supports this limited action: Complete the approved registration workflow or document the supported restricted-site exception.
Incorrect Answers
B:Inspect target Purity versions, coordinator eligibility, security domains and fleet network reachability. Those checks address a separate pure fusion fleet prerequisites concern, not the specific finding: A regulated finance site must use an approved proxy before its first Pure1 registration. The useful observations are: Check customer authorization, Pure1 identity, supported outbound route and verified service health. The relevant observation must instead support: Complete the approved registration workflow or document the supported restricted-site exception.
D:Move incorrect patching to approved target interfaces and retest with the network owner. That change targets a separate storage ethernet target-port role mapping concern; the unresolved issue is: A regulated finance site must use an approved proxy before its first Pure1 registration. The scoped response is: Complete the approved registration workflow or document the supported restricted-site exception. The authorized change must instead follow: Check customer authorization, Pure1 identity, supported outbound route and verified service health.
E:Compare host IQNs or WWPNs, access groups, intended volume mapping and application-owner approvals. Those checks address a separate host and host-group mapping safety concern, not the specific finding: A regulated finance site must use an approved proxy before its first Pure1 registration. The useful observations are: Check customer authorization, Pure1 identity, supported outbound route and verified service health. The relevant observation must instead support: Complete the approved registration workflow or document the supported restricted-site exception.
Question 445
An enterprise change review is deciding whether its response to pure1 registration and telemetry authorization has been justified. The fictional case facts are: A regulated finance site must use an approved proxy before its first Pure1 registration. The review needs three separate components: a sound FlashArray administration principle, a scoped authorized response, and an independent measurable success check. Choose EXACTLY THREE statements that fulfill those roles.
- Registration for cloud telemetry must comply with customer policy and prove the intended network path works.
- Complete the approved registration workflow or document the supported restricted-site exception.
- Rotate or disable temporary credentials and establish least-privilege named ownership after initial setup.
- The link negotiates the intended mode and remains error-free during a controlled load test.
- Network cabling must distinguish iSCSI storage interfaces from management or replication ports by their supported role.
- The authorized customer account recognizes the intended serial and telemetry path, or a signed offline procedure is documented.
Explanation
Correct Answer
A:Registration for cloud telemetry must comply with customer policy and prove the intended network path works. A regulated finance site must use an approved proxy before its first Pure1 registration. The comparison to make is: Check customer authorization, Pure1 identity, supported outbound route and verified service health. That principle leads to a bounded response: Complete the approved registration workflow or document the supported restricted-site exception.
B:A regulated finance site must use an approved proxy before its first Pure1 registration. Complete the approved registration workflow or document the supported restricted-site exception. Verify the change by checking: The authorized customer account recognizes the intended serial and telemetry path, or a signed offline procedure is documented. The action implements this principle: Registration for cloud telemetry must comply with customer policy and prove the intended network path works.
F:The authorized customer account recognizes the intended serial and telemetry path, or a signed offline procedure is documented. This shows whether the scoped response worked: Complete the approved registration workflow or document the supported restricted-site exception. A regulated finance site must use an approved proxy before its first Pure1 registration. The result should be supported by this evidence: Check customer authorization, Pure1 identity, supported outbound route and verified service health.
Incorrect Answers
C:Rotate or disable temporary credentials and establish least-privilege named ownership after initial setup. That change targets a separate privileged local account handoff concern; the unresolved issue is: A regulated finance site must use an approved proxy before its first Pure1 registration. The scoped response is: Complete the approved registration workflow or document the supported restricted-site exception. The action should implement: Registration for cloud telemetry must comply with customer policy and prove the intended network path works.
D:The link negotiates the intended mode and remains error-free during a controlled load test. That outcome tests a separate ethernet optics matching concern, not whether the reported problem is fixed: A regulated finance site must use an approved proxy before its first Pure1 registration. A directly relevant result would be: The authorized customer account recognizes the intended serial and telemetry path, or a signed offline procedure is documented. The acceptance test needs evidence from: Check customer authorization, Pure1 identity, supported outbound route and verified service health.
E:Network cabling must distinguish iSCSI storage interfaces from management or replication ports by their supported role. That is a separate storage ethernet target-port role mapping concern; it does not explain the case: A regulated finance site must use an approved proxy before its first Pure1 registration. The governing distinction here is: Registration for cloud telemetry must comply with customer policy and prove the intended network path works. The governing rule must instead lead to: Complete the approved registration workflow or document the supported restricted-site exception.
Question 446
A hypothetical FlashArray operations change concerns pure1 registration and telemetry authorization in the Installation area. The change or incident record reports: A dark-site deployment's checklist incorrectly marks cloud registration as successful despite denied egress. Before modifying any FlashArray object, the administrator must identify the defensible operating principle. Which ONE governing principle directly applies? Choose ONE answer.
- Fleet onboarding should use the supported software baseline, connectivity and role assignments before combining arrays.
- Host access is production ready only when its approved multiple storage paths are visible and working.
- New-array software changes require an authorized release and verified installation medium for the hardware generation.
- Registration for cloud telemetry must comply with customer policy and prove the intended network path works.
Explanation
Correct Answer
D:Registration for cloud telemetry must comply with customer policy and prove the intended network path works. A dark-site deployment's checklist incorrectly marks cloud registration as successful despite denied egress. The comparison to make is: Check customer authorization, Pure1 identity, supported outbound route and verified service health.
Incorrect Answers
A:Fleet onboarding should use the supported software baseline, connectivity and role assignments before combining arrays. That is a separate pure fusion fleet prerequisites concern; it does not explain the case: A dark-site deployment's checklist incorrectly marks cloud registration as successful despite denied egress. The governing distinction here is: Registration for cloud telemetry must comply with customer policy and prove the intended network path works.
B:Host access is production ready only when its approved multiple storage paths are visible and working. That is a separate multipath configuration after presentation concern; it does not explain the case: A dark-site deployment's checklist incorrectly marks cloud registration as successful despite denied egress. The governing distinction here is: Registration for cloud telemetry must comply with customer policy and prove the intended network path works.
C:New-array software changes require an authorized release and verified installation medium for the hardware generation. That is a separate purity software staging on newly installed hardware concern; it does not explain the case: A dark-site deployment's checklist incorrectly marks cloud registration as successful despite denied egress. The governing distinction here is: Registration for cloud telemetry must comply with customer policy and prove the intended network path works.
Question 447
During FlashArray administration concerning pure1 registration and telemetry authorization, an operator reviews this fictional service issue: A dark-site deployment's checklist incorrectly marks cloud registration as successful despite denied egress. Several explanations remain plausible until the relevant configuration and runtime evidence are checked. Which ONE specific evidence package should the administrator examine before deciding the change or diagnosis? Choose ONE answer.
- Check customer authorization, Pure1 identity, supported outbound route and verified service health.
- Inspect populated slots, blanking plates and model-specific thermal guidance.
- Check safe-lift plan, component weights, rack mounting instructions and the available lifting device.
- Inspect current model port map, configured service role and actual switch connections.
Explanation
Correct Answer
A:A dark-site deployment's checklist incorrectly marks cloud registration as successful despite denied egress. Check customer authorization, Pure1 identity, supported outbound route and verified service health. These observations test the rule: Registration for cloud telemetry must comply with customer policy and prove the intended network path works.
Incorrect Answers
B:Inspect populated slots, blanking plates and model-specific thermal guidance. Those checks address a separate blanking and airflow integrity concern, not the specific finding: A dark-site deployment's checklist incorrectly marks cloud registration as successful despite denied egress. The useful observations are: Check customer authorization, Pure1 identity, supported outbound route and verified service health.
C:Check safe-lift plan, component weights, rack mounting instructions and the available lifting device. Those checks address a separate load-assisted chassis mounting concern, not the specific finding: A dark-site deployment's checklist incorrectly marks cloud registration as successful despite denied egress. The useful observations are: Check customer authorization, Pure1 identity, supported outbound route and verified service health.
D:Inspect current model port map, configured service role and actual switch connections. Those checks address a separate storage ethernet target-port role mapping concern, not the specific finding: A dark-site deployment's checklist incorrectly marks cloud registration as successful despite denied egress. The useful observations are: Check customer authorization, Pure1 identity, supported outbound route and verified service health.
Question 448
A change manager requests a safe and limited FlashArray response to a Installation problem involving pure1 registration and telemetry authorization. The reported situation is: A dark-site deployment's checklist incorrectly marks cloud registration as successful despite denied egress. The change must follow the observed facts, preserve recovery capability and avoid unrelated service impact. Which ONE bounded administrative action best matches this case? Choose ONE answer.
- Apply approved DNS/NTP settings and recheck dependent services.
- Complete the approved registration workflow or document the supported restricted-site exception.
- Establish a secured console session using the correct guide and keep initial credentials under controlled custody.
- Recable the identified management connections through the reviewed, labeled network plan.
Explanation
Correct Answer
B:A dark-site deployment's checklist incorrectly marks cloud registration as successful despite denied egress. Complete the approved registration workflow or document the supported restricted-site exception. Verify the change by checking: The authorized customer account recognizes the intended serial and telemetry path, or a signed offline procedure is documented.
Incorrect Answers
A:Apply approved DNS/NTP settings and recheck dependent services. That change targets a separate time configuration at first startup concern; the unresolved issue is: A dark-site deployment's checklist incorrectly marks cloud registration as successful despite denied egress. The scoped response is: Complete the approved registration workflow or document the supported restricted-site exception.
C:Establish a secured console session using the correct guide and keep initial credentials under controlled custody. That change targets a separate controller initialization through approved console concern; the unresolved issue is: A dark-site deployment's checklist incorrectly marks cloud registration as successful despite denied egress. The scoped response is: Complete the approved registration workflow or document the supported restricted-site exception.
D:Recable the identified management connections through the reviewed, labeled network plan. That change targets a separate dual-controller management cabling concern; the unresolved issue is: A dark-site deployment's checklist incorrectly marks cloud registration as successful despite denied egress. The scoped response is: Complete the approved registration workflow or document the supported restricted-site exception.
Question 449
Two independent FlashArray administrator reviewers discuss pure1 registration and telemetry authorization. Their case record says: A dark-site deployment's checklist incorrectly marks cloud registration as successful despite denied egress. One requires diagnostic evidence that can distinguish the actual issue from lookalike symptoms; the other requires a limited and approved remediation. Choose EXACTLY TWO statements that jointly provide those roles.
- Compare live port-link state, controller connectivity and shelf paths with the approved as-built drawing.
- Use the corresponding installation steps; stop rather than improvise a different model's slot arrangement.
- Check customer authorization, Pure1 identity, supported outbound route and verified service health.
- Complete the approved registration workflow or document the supported restricted-site exception.
- Inspect cable bend radii, rear service paths, connector tension and port labeling.
Explanation
Correct Answer
C:A dark-site deployment's checklist incorrectly marks cloud registration as successful despite denied egress. Check customer authorization, Pure1 identity, supported outbound route and verified service health. These observations test the rule: Registration for cloud telemetry must comply with customer policy and prove the intended network path works. The evidence supports this limited action: Complete the approved registration workflow or document the supported restricted-site exception.
D:A dark-site deployment's checklist incorrectly marks cloud registration as successful despite denied egress. Complete the approved registration workflow or document the supported restricted-site exception. Verify the change by checking: The authorized customer account recognizes the intended serial and telemetry path, or a signed offline procedure is documented. The change should follow this observation: Check customer authorization, Pure1 identity, supported outbound route and verified service health.
Incorrect Answers
A:Compare live port-link state, controller connectivity and shelf paths with the approved as-built drawing. Those checks address a separate post-cabling controller and shelf link verification concern, not the specific finding: A dark-site deployment's checklist incorrectly marks cloud registration as successful despite denied egress. The useful observations are: Check customer authorization, Pure1 identity, supported outbound route and verified service health. The relevant observation must instead support: Complete the approved registration workflow or document the supported restricted-site exception.
B:Use the corresponding installation steps; stop rather than improvise a different model's slot arrangement. That change targets a separate chassis and controller hardware identity concern; the unresolved issue is: A dark-site deployment's checklist incorrectly marks cloud registration as successful despite denied egress. The scoped response is: Complete the approved registration workflow or document the supported restricted-site exception. The authorized change must instead follow: Check customer authorization, Pure1 identity, supported outbound route and verified service health.
E:Inspect cable bend radii, rear service paths, connector tension and port labeling. Those checks address a separate cable strain relief and service loops concern, not the specific finding: A dark-site deployment's checklist incorrectly marks cloud registration as successful despite denied egress. The useful observations are: Check customer authorization, Pure1 identity, supported outbound route and verified service health. The relevant observation must instead support: Complete the approved registration workflow or document the supported restricted-site exception.
Question 450
An enterprise change review is deciding whether its response to pure1 registration and telemetry authorization has been justified. The fictional case facts are: A dark-site deployment's checklist incorrectly marks cloud registration as successful despite denied egress. The review needs three separate components: a sound FlashArray administration principle, a scoped authorized response, and an independent measurable success check. Choose EXACTLY THREE statements that fulfill those roles.
- Hosts see expected target identities through each designated FC fabric.
- Complete the approved registration workflow or document the supported restricted-site exception.
- Registration for cloud telemetry must comply with customer policy and prove the intended network path works.
- Move incorrect patching to approved target interfaces and retest with the network owner.
- The authorized customer account recognizes the intended serial and telemetry path, or a signed offline procedure is documented.
- Before configuring storage objects, physical install checks should confirm documented healthy status of both controllers and required enclosures.
Explanation
Correct Answer
B:A dark-site deployment's checklist incorrectly marks cloud registration as successful despite denied egress. Complete the approved registration workflow or document the supported restricted-site exception. Verify the change by checking: The authorized customer account recognizes the intended serial and telemetry path, or a signed offline procedure is documented. The action implements this principle: Registration for cloud telemetry must comply with customer policy and prove the intended network path works.
C:Registration for cloud telemetry must comply with customer policy and prove the intended network path works. A dark-site deployment's checklist incorrectly marks cloud registration as successful despite denied egress. The comparison to make is: Check customer authorization, Pure1 identity, supported outbound route and verified service health. That principle leads to a bounded response: Complete the approved registration workflow or document the supported restricted-site exception.
E:The authorized customer account recognizes the intended serial and telemetry path, or a signed offline procedure is documented. This shows whether the scoped response worked: Complete the approved registration workflow or document the supported restricted-site exception. A dark-site deployment's checklist incorrectly marks cloud registration as successful despite denied egress. The result should be supported by this evidence: Check customer authorization, Pure1 identity, supported outbound route and verified service health.
Incorrect Answers
A:Hosts see expected target identities through each designated FC fabric. That outcome tests a separate fibre channel target-port cabling concern, not whether the reported problem is fixed: A dark-site deployment's checklist incorrectly marks cloud registration as successful despite denied egress. A directly relevant result would be: The authorized customer account recognizes the intended serial and telemetry path, or a signed offline procedure is documented. The acceptance test needs evidence from: Check customer authorization, Pure1 identity, supported outbound route and verified service health.
D:Move incorrect patching to approved target interfaces and retest with the network owner. That change targets a separate storage ethernet target-port role mapping concern; the unresolved issue is: A dark-site deployment's checklist incorrectly marks cloud registration as successful despite denied egress. The scoped response is: Complete the approved registration workflow or document the supported restricted-site exception. The action should implement: Registration for cloud telemetry must comply with customer policy and prove the intended network path works.
F:Before configuring storage objects, physical install checks should confirm documented healthy status of both controllers and required enclosures. That is a separate initial controller and enclosure status lights concern; it does not explain the case: A dark-site deployment's checklist incorrectly marks cloud registration as successful despite denied egress. The governing distinction here is: Registration for cloud telemetry must comply with customer policy and prove the intended network path works. The governing rule must instead lead to: Complete the approved registration workflow or document the supported restricted-site exception.