Pure Storage FlashArray Implementation Specialist Practice Test 41
Question 400
An enterprise change review is deciding whether its response to controller initialization through approved console has been justified. The fictional case facts are: A new installer intends to photograph the initial privileged console password for a shared project chat. The review needs three separate components: a sound FlashArray administration principle, a scoped authorized response, and an independent measurable success check. Choose EXACTLY THREE statements that fulfill those roles.
- The customer can authenticate with intended roles, while temporary installer credentials are no longer active.
- Initial local console access must use the vendor-approved method and protect privileged setup credentials.
- SAN host paths must be cabled to intended FC ports and distinct fabrics according to the approved topology.
- Fit the approved blanking pieces and restore the intended airflow path before production load.
- Establish a secured console session using the correct guide and keep initial credentials under controlled custody.
- The commissioning engineer can authenticate and record the expected system identity without exposing secrets.
Explanation
Correct Answer
B:Initial local console access must use the vendor-approved method and protect privileged setup credentials. A new installer intends to photograph the initial privileged console password for a shared project chat. The comparison to make is: Verify supported serial-console interface, expected connection settings and physical access authorization. That principle leads to a bounded response: Establish a secured console session using the correct guide and keep initial credentials under controlled custody.
E:A new installer intends to photograph the initial privileged console password for a shared project chat. Establish a secured console session using the correct guide and keep initial credentials under controlled custody. Verify the change by checking: The commissioning engineer can authenticate and record the expected system identity without exposing secrets. The action implements this principle: Initial local console access must use the vendor-approved method and protect privileged setup credentials.
F:The commissioning engineer can authenticate and record the expected system identity without exposing secrets. This shows whether the scoped response worked: Establish a secured console session using the correct guide and keep initial credentials under controlled custody. A new installer intends to photograph the initial privileged console password for a shared project chat. The result should be supported by this evidence: Verify supported serial-console interface, expected connection settings and physical access authorization.
Incorrect Answers
A:The customer can authenticate with intended roles, while temporary installer credentials are no longer active. That outcome tests a separate privileged local account handoff concern, not whether the reported problem is fixed: A new installer intends to photograph the initial privileged console password for a shared project chat. A directly relevant result would be: The commissioning engineer can authenticate and record the expected system identity without exposing secrets. The acceptance test needs evidence from: Verify supported serial-console interface, expected connection settings and physical access authorization.
C:SAN host paths must be cabled to intended FC ports and distinct fabrics according to the approved topology. That is a separate fibre channel target-port cabling concern; it does not explain the case: A new installer intends to photograph the initial privileged console password for a shared project chat. The governing distinction here is: Initial local console access must use the vendor-approved method and protect privileged setup credentials. The governing rule must instead lead to: Establish a secured console session using the correct guide and keep initial credentials under controlled custody.
D:Fit the approved blanking pieces and restore the intended airflow path before production load. That change targets a separate blanking and airflow integrity concern; the unresolved issue is: A new installer intends to photograph the initial privileged console password for a shared project chat. The scoped response is: Establish a secured console session using the correct guide and keep initial credentials under controlled custody. The action should implement: Initial local console access must use the vendor-approved method and protect privileged setup credentials.
Question 401
A hypothetical FlashArray operations change concerns purity software staging on newly installed hardware in the Installation area. The change or incident record reports: An installer assumes the shipped Purity level matches the deployment workbook without verifying it. Before modifying any FlashArray object, the administrator must identify the defensible operating principle. Which ONE governing principle directly applies? Choose ONE answer.
- External shelf connections must follow the model-specific supported topology and cable placement rather than a convenient daisy chain.
- New-array software changes require an authorized release and verified installation medium for the hardware generation.
- The management topology should preserve intended administrator access across both controller paths and documented fault domains.
- A shelf added at installation must be discovered and admitted using the supported hardware procedure and inventory identity.
Explanation
Correct Answer
B:New-array software changes require an authorized release and verified installation medium for the hardware generation. An installer assumes the shipped Purity level matches the deployment workbook without verifying it. The comparison to make is: Compare currently installed Purity version, supported target image and downloaded package checksum.
Incorrect Answers
A:External shelf connections must follow the model-specific supported topology and cable placement rather than a convenient daisy chain. That is a separate directflash shelf supported topology concern; it does not explain the case: An installer assumes the shipped Purity level matches the deployment workbook without verifying it. The governing distinction here is: New-array software changes require an authorized release and verified installation medium for the hardware generation.
C:The management topology should preserve intended administrator access across both controller paths and documented fault domains. That is a separate dual-controller management cabling concern; it does not explain the case: An installer assumes the shipped Purity level matches the deployment workbook without verifying it. The governing distinction here is: New-array software changes require an authorized release and verified installation medium for the hardware generation.
D:A shelf added at installation must be discovered and admitted using the supported hardware procedure and inventory identity. That is a separate directflash shelf admission and identity concern; it does not explain the case: An installer assumes the shipped Purity level matches the deployment workbook without verifying it. The governing distinction here is: New-array software changes require an authorized release and verified installation medium for the hardware generation.
Question 402
During FlashArray administration concerning purity software staging on newly installed hardware, an operator reviews this fictional service issue: An installer assumes the shipped Purity level matches the deployment workbook without verifying it. Several explanations remain plausible until the relevant configuration and runtime evidence are checked. Which ONE specific evidence package should the administrator examine before deciding the change or diagnosis? Choose ONE answer.
- Compare currently installed Purity version, supported target image and downloaded package checksum.
- Read hardware labels, model-specific component map and matching supported procedure.
- Inspect target Purity versions, coordinator eligibility, security domains and fleet network reachability.
- Check shelf serial, discovered enclosure state and supported module inventory against the current installation guide.
Explanation
Correct Answer
A:An installer assumes the shipped Purity level matches the deployment workbook without verifying it. Compare currently installed Purity version, supported target image and downloaded package checksum. These observations test the rule: New-array software changes require an authorized release and verified installation medium for the hardware generation.
Incorrect Answers
B:Read hardware labels, model-specific component map and matching supported procedure. Those checks address a separate chassis and controller hardware identity concern, not the specific finding: An installer assumes the shipped Purity level matches the deployment workbook without verifying it. The useful observations are: Compare currently installed Purity version, supported target image and downloaded package checksum.
C:Inspect target Purity versions, coordinator eligibility, security domains and fleet network reachability. Those checks address a separate pure fusion fleet prerequisites concern, not the specific finding: An installer assumes the shipped Purity level matches the deployment workbook without verifying it. The useful observations are: Compare currently installed Purity version, supported target image and downloaded package checksum.
D:Check shelf serial, discovered enclosure state and supported module inventory against the current installation guide. Those checks address a separate directflash shelf admission and identity concern, not the specific finding: An installer assumes the shipped Purity level matches the deployment workbook without verifying it. The useful observations are: Compare currently installed Purity version, supported target image and downloaded package checksum.
Question 403
A change manager requests a safe and limited FlashArray response to a Installation problem involving purity software staging on newly installed hardware. The reported situation is: An installer assumes the shipped Purity level matches the deployment workbook without verifying it. The change must follow the observed facts, preserve recovery capability and avoid unrelated service impact. Which ONE bounded administrative action best matches this case? Choose ONE answer.
- Use the corresponding installation steps; stop rather than improvise a different model's slot arrangement.
- Correct an unseated module or miswired power connection under approved electrical procedures.
- Recable the identified management connections through the reviewed, labeled network plan.
- Stage and apply only the approved installation procedure with a documented rollback or support stop gate.
Explanation
Correct Answer
D:An installer assumes the shipped Purity level matches the deployment workbook without verifying it. Stage and apply only the approved installation procedure with a documented rollback or support stop gate. Verify the change by checking: The array boots into a supported specified release and health checks show no new faults.
Incorrect Answers
A:Use the corresponding installation steps; stop rather than improvise a different model's slot arrangement. That change targets a separate chassis and controller hardware identity concern; the unresolved issue is: An installer assumes the shipped Purity level matches the deployment workbook without verifying it. The scoped response is: Stage and apply only the approved installation procedure with a documented rollback or support stop gate.
B:Correct an unseated module or miswired power connection under approved electrical procedures. That change targets a separate redundant power supply physical verification concern; the unresolved issue is: An installer assumes the shipped Purity level matches the deployment workbook without verifying it. The scoped response is: Stage and apply only the approved installation procedure with a documented rollback or support stop gate.
C:Recable the identified management connections through the reviewed, labeled network plan. That change targets a separate dual-controller management cabling concern; the unresolved issue is: An installer assumes the shipped Purity level matches the deployment workbook without verifying it. The scoped response is: Stage and apply only the approved installation procedure with a documented rollback or support stop gate.
Question 404
Two independent FlashArray administrator reviewers discuss purity software staging on newly installed hardware. Their case record says: An installer assumes the shipped Purity level matches the deployment workbook without verifying it. One requires diagnostic evidence that can distinguish the actual issue from lookalike symptoms; the other requires a limited and approved remediation. Choose EXACTLY TWO statements that jointly provide those roles.
- Stage and apply only the approved installation procedure with a documented rollback or support stop gate.
- Correct the as-built labels before accepting the implementation.
- Read hardware labels, model-specific component map and matching supported procedure.
- Compare currently installed Purity version, supported target image and downloaded package checksum.
- Trace target port WWPNs through physical switch ports and current fabric maps.
Explanation
Correct Answer
A:An installer assumes the shipped Purity level matches the deployment workbook without verifying it. Stage and apply only the approved installation procedure with a documented rollback or support stop gate. Verify the change by checking: The array boots into a supported specified release and health checks show no new faults. The change should follow this observation: Compare currently installed Purity version, supported target image and downloaded package checksum.
D:An installer assumes the shipped Purity level matches the deployment workbook without verifying it. Compare currently installed Purity version, supported target image and downloaded package checksum. These observations test the rule: New-array software changes require an authorized release and verified installation medium for the hardware generation. The evidence supports this limited action: Stage and apply only the approved installation procedure with a documented rollback or support stop gate.
Incorrect Answers
B:Correct the as-built labels before accepting the implementation. That change targets a separate rack labels and asset identification concern; the unresolved issue is: An installer assumes the shipped Purity level matches the deployment workbook without verifying it. The scoped response is: Stage and apply only the approved installation procedure with a documented rollback or support stop gate. The authorized change must instead follow: Compare currently installed Purity version, supported target image and downloaded package checksum.
C:Read hardware labels, model-specific component map and matching supported procedure. Those checks address a separate chassis and controller hardware identity concern, not the specific finding: An installer assumes the shipped Purity level matches the deployment workbook without verifying it. The useful observations are: Compare currently installed Purity version, supported target image and downloaded package checksum. The relevant observation must instead support: Stage and apply only the approved installation procedure with a documented rollback or support stop gate.
E:Trace target port WWPNs through physical switch ports and current fabric maps. Those checks address a separate fibre channel target-port cabling concern, not the specific finding: An installer assumes the shipped Purity level matches the deployment workbook without verifying it. The useful observations are: Compare currently installed Purity version, supported target image and downloaded package checksum. The relevant observation must instead support: Stage and apply only the approved installation procedure with a documented rollback or support stop gate.
Question 405
An enterprise change review is deciding whether its response to purity software staging on newly installed hardware has been justified. The fictional case facts are: An installer assumes the shipped Purity level matches the deployment workbook without verifying it. The review needs three separate components: a sound FlashArray administration principle, a scoped authorized response, and an independent measurable success check. Choose EXACTLY THREE statements that fulfill those roles.
- Physical Ethernet links require transceivers and cabling supported by both selected ports and the switch fabric.
- Fit the approved blanking pieces and restore the intended airflow path before production load.
- Stage and apply only the approved installation procedure with a documented rollback or support stop gate.
- New-array software changes require an authorized release and verified installation medium for the hardware generation.
- Administrators can reach the intended management endpoint with both controllers in healthy state.
- The array boots into a supported specified release and health checks show no new faults.
Explanation
Correct Answer
C:An installer assumes the shipped Purity level matches the deployment workbook without verifying it. Stage and apply only the approved installation procedure with a documented rollback or support stop gate. Verify the change by checking: The array boots into a supported specified release and health checks show no new faults. The action implements this principle: New-array software changes require an authorized release and verified installation medium for the hardware generation.
D:New-array software changes require an authorized release and verified installation medium for the hardware generation. An installer assumes the shipped Purity level matches the deployment workbook without verifying it. The comparison to make is: Compare currently installed Purity version, supported target image and downloaded package checksum. That principle leads to a bounded response: Stage and apply only the approved installation procedure with a documented rollback or support stop gate.
F:The array boots into a supported specified release and health checks show no new faults. This shows whether the scoped response worked: Stage and apply only the approved installation procedure with a documented rollback or support stop gate. An installer assumes the shipped Purity level matches the deployment workbook without verifying it. The result should be supported by this evidence: Compare currently installed Purity version, supported target image and downloaded package checksum.
Incorrect Answers
A:Physical Ethernet links require transceivers and cabling supported by both selected ports and the switch fabric. That is a separate ethernet optics matching concern; it does not explain the case: An installer assumes the shipped Purity level matches the deployment workbook without verifying it. The governing distinction here is: New-array software changes require an authorized release and verified installation medium for the hardware generation. The governing rule must instead lead to: Stage and apply only the approved installation procedure with a documented rollback or support stop gate.
B:Fit the approved blanking pieces and restore the intended airflow path before production load. That change targets a separate blanking and airflow integrity concern; the unresolved issue is: An installer assumes the shipped Purity level matches the deployment workbook without verifying it. The scoped response is: Stage and apply only the approved installation procedure with a documented rollback or support stop gate. The action should implement: New-array software changes require an authorized release and verified installation medium for the hardware generation.
E:Administrators can reach the intended management endpoint with both controllers in healthy state. That outcome tests a separate dual-controller management cabling concern, not whether the reported problem is fixed: An installer assumes the shipped Purity level matches the deployment workbook without verifying it. A directly relevant result would be: The array boots into a supported specified release and health checks show no new faults. The acceptance test needs evidence from: Compare currently installed Purity version, supported target image and downloaded package checksum.
Question 406
A hypothetical FlashArray operations change concerns purity software staging on newly installed hardware in the Installation area. The change or incident record reports: A customer requests an immediate jump to a newer image that has not been approved for the delivered chassis. Before modifying any FlashArray object, the administrator must identify the defensible operating principle. Which ONE governing principle directly applies? Choose ONE answer.
- A shelf added at installation must be discovered and admitted using the supported hardware procedure and inventory identity.
- Initial local console access must use the vendor-approved method and protect privileged setup credentials.
- A physical link should be verified for supported speed, optics and error health after cabling.
- New-array software changes require an authorized release and verified installation medium for the hardware generation.
Explanation
Correct Answer
D:New-array software changes require an authorized release and verified installation medium for the hardware generation. A customer requests an immediate jump to a newer image that has not been approved for the delivered chassis. The comparison to make is: Compare currently installed Purity version, supported target image and downloaded package checksum.
Incorrect Answers
A:A shelf added at installation must be discovered and admitted using the supported hardware procedure and inventory identity. That is a separate directflash shelf admission and identity concern; it does not explain the case: A customer requests an immediate jump to a newer image that has not been approved for the delivered chassis. The governing distinction here is: New-array software changes require an authorized release and verified installation medium for the hardware generation.
B:Initial local console access must use the vendor-approved method and protect privileged setup credentials. That is a separate controller initialization through approved console concern; it does not explain the case: A customer requests an immediate jump to a newer image that has not been approved for the delivered chassis. The governing distinction here is: New-array software changes require an authorized release and verified installation medium for the hardware generation.
C:A physical link should be verified for supported speed, optics and error health after cabling. That is a separate switch port speed and error validation concern; it does not explain the case: A customer requests an immediate jump to a newer image that has not been approved for the delivered chassis. The governing distinction here is: New-array software changes require an authorized release and verified installation medium for the hardware generation.
Question 407
During FlashArray administration concerning purity software staging on newly installed hardware, an operator reviews this fictional service issue: A customer requests an immediate jump to a newer image that has not been approved for the delivered chassis. Several explanations remain plausible until the relevant configuration and runtime evidence are checked. Which ONE specific evidence package should the administrator examine before deciding the change or diagnosis? Choose ONE answer.
- Compare optical module specifications, connector type, speed settings and live link diagnostics.
- Compare currently installed Purity version, supported target image and downloaded package checksum.
- Inspect target Purity versions, coordinator eligibility, security domains and fleet network reachability.
- Compare host IQNs or WWPNs, access groups, intended volume mapping and application-owner approvals.
Explanation
Correct Answer
B:A customer requests an immediate jump to a newer image that has not been approved for the delivered chassis. Compare currently installed Purity version, supported target image and downloaded package checksum. These observations test the rule: New-array software changes require an authorized release and verified installation medium for the hardware generation.
Incorrect Answers
A:Compare optical module specifications, connector type, speed settings and live link diagnostics. Those checks address a separate ethernet optics matching concern, not the specific finding: A customer requests an immediate jump to a newer image that has not been approved for the delivered chassis. The useful observations are: Compare currently installed Purity version, supported target image and downloaded package checksum.
C:Inspect target Purity versions, coordinator eligibility, security domains and fleet network reachability. Those checks address a separate pure fusion fleet prerequisites concern, not the specific finding: A customer requests an immediate jump to a newer image that has not been approved for the delivered chassis. The useful observations are: Compare currently installed Purity version, supported target image and downloaded package checksum.
D:Compare host IQNs or WWPNs, access groups, intended volume mapping and application-owner approvals. Those checks address a separate host and host-group mapping safety concern, not the specific finding: A customer requests an immediate jump to a newer image that has not been approved for the delivered chassis. The useful observations are: Compare currently installed Purity version, supported target image and downloaded package checksum.
Question 408
A change manager requests a safe and limited FlashArray response to a Installation problem involving purity software staging on newly installed hardware. The reported situation is: A customer requests an immediate jump to a newer image that has not been approved for the delivered chassis. The change must follow the observed facts, preserve recovery capability and avoid unrelated service impact. Which ONE bounded administrative action best matches this case? Choose ONE answer.
- Install only the approved rail hardware after confirming the cabinet's mounting standard.
- Rebuild the shelf connection map using the supported sequence after a documented outage review.
- Stage and apply only the approved installation procedure with a documented rollback or support stop gate.
- Replace unsupported optics with approved compatible components before enabling target traffic.
Explanation
Correct Answer
C:A customer requests an immediate jump to a newer image that has not been approved for the delivered chassis. Stage and apply only the approved installation procedure with a documented rollback or support stop gate. Verify the change by checking: The array boots into a supported specified release and health checks show no new faults.
Incorrect Answers
A:Install only the approved rail hardware after confirming the cabinet's mounting standard. That change targets a separate rail kit selection and orientation concern; the unresolved issue is: A customer requests an immediate jump to a newer image that has not been approved for the delivered chassis. The scoped response is: Stage and apply only the approved installation procedure with a documented rollback or support stop gate.
B:Rebuild the shelf connection map using the supported sequence after a documented outage review. That change targets a separate directflash shelf supported topology concern; the unresolved issue is: A customer requests an immediate jump to a newer image that has not been approved for the delivered chassis. The scoped response is: Stage and apply only the approved installation procedure with a documented rollback or support stop gate.
D:Replace unsupported optics with approved compatible components before enabling target traffic. That change targets a separate ethernet optics matching concern; the unresolved issue is: A customer requests an immediate jump to a newer image that has not been approved for the delivered chassis. The scoped response is: Stage and apply only the approved installation procedure with a documented rollback or support stop gate.
Question 409
Two independent FlashArray administrator reviewers discuss purity software staging on newly installed hardware. Their case record says: A customer requests an immediate jump to a newer image that has not been approved for the delivered chassis. One requires diagnostic evidence that can distinguish the actual issue from lookalike symptoms; the other requires a limited and approved remediation. Choose EXACTLY TWO statements that jointly provide those roles.
- Compare host IQNs or WWPNs, access groups, intended volume mapping and application-owner approvals.
- Compare currently installed Purity version, supported target image and downloaded package checksum.
- Establish a secured console session using the correct guide and keep initial credentials under controlled custody.
- Stage and apply only the approved installation procedure with a documented rollback or support stop gate.
- Inspect populated slots, blanking plates and model-specific thermal guidance.
Explanation
Correct Answer
B:A customer requests an immediate jump to a newer image that has not been approved for the delivered chassis. Compare currently installed Purity version, supported target image and downloaded package checksum. These observations test the rule: New-array software changes require an authorized release and verified installation medium for the hardware generation. The evidence supports this limited action: Stage and apply only the approved installation procedure with a documented rollback or support stop gate.
D:A customer requests an immediate jump to a newer image that has not been approved for the delivered chassis. Stage and apply only the approved installation procedure with a documented rollback or support stop gate. Verify the change by checking: The array boots into a supported specified release and health checks show no new faults. The change should follow this observation: Compare currently installed Purity version, supported target image and downloaded package checksum.
Incorrect Answers
A:Compare host IQNs or WWPNs, access groups, intended volume mapping and application-owner approvals. Those checks address a separate host and host-group mapping safety concern, not the specific finding: A customer requests an immediate jump to a newer image that has not been approved for the delivered chassis. The useful observations are: Compare currently installed Purity version, supported target image and downloaded package checksum. The relevant observation must instead support: Stage and apply only the approved installation procedure with a documented rollback or support stop gate.
C:Establish a secured console session using the correct guide and keep initial credentials under controlled custody. That change targets a separate controller initialization through approved console concern; the unresolved issue is: A customer requests an immediate jump to a newer image that has not been approved for the delivered chassis. The scoped response is: Stage and apply only the approved installation procedure with a documented rollback or support stop gate. The authorized change must instead follow: Compare currently installed Purity version, supported target image and downloaded package checksum.
E:Inspect populated slots, blanking plates and model-specific thermal guidance. Those checks address a separate blanking and airflow integrity concern, not the specific finding: A customer requests an immediate jump to a newer image that has not been approved for the delivered chassis. The useful observations are: Compare currently installed Purity version, supported target image and downloaded package checksum. The relevant observation must instead support: Stage and apply only the approved installation procedure with a documented rollback or support stop gate.
Question 410
An enterprise change review is deciding whether its response to purity software staging on newly installed hardware has been justified. The fictional case facts are: A customer requests an immediate jump to a newer image that has not been approved for the delivered chassis. The review needs three separate components: a sound FlashArray administration principle, a scoped authorized response, and an independent measurable success check. Choose EXACTLY THREE statements that fulfill those roles.
- Create or correct authorized host objects and mapping after identity verification.
- A visually neat cable installation is insufficient without a command-backed topology and health check.
- Stage and apply only the approved installation procedure with a documented rollback or support stop gate.
- New-array software changes require an authorized release and verified installation medium for the hardware generation.
- The expected port speed and link health remain stable during a controlled representative workload.
- The array boots into a supported specified release and health checks show no new faults.
Explanation
Correct Answer
C:A customer requests an immediate jump to a newer image that has not been approved for the delivered chassis. Stage and apply only the approved installation procedure with a documented rollback or support stop gate. Verify the change by checking: The array boots into a supported specified release and health checks show no new faults. The action implements this principle: New-array software changes require an authorized release and verified installation medium for the hardware generation.
D:New-array software changes require an authorized release and verified installation medium for the hardware generation. A customer requests an immediate jump to a newer image that has not been approved for the delivered chassis. The comparison to make is: Compare currently installed Purity version, supported target image and downloaded package checksum. That principle leads to a bounded response: Stage and apply only the approved installation procedure with a documented rollback or support stop gate.
F:The array boots into a supported specified release and health checks show no new faults. This shows whether the scoped response worked: Stage and apply only the approved installation procedure with a documented rollback or support stop gate. A customer requests an immediate jump to a newer image that has not been approved for the delivered chassis. The result should be supported by this evidence: Compare currently installed Purity version, supported target image and downloaded package checksum.
Incorrect Answers
A:Create or correct authorized host objects and mapping after identity verification. That change targets a separate host and host-group mapping safety concern; the unresolved issue is: A customer requests an immediate jump to a newer image that has not been approved for the delivered chassis. The scoped response is: Stage and apply only the approved installation procedure with a documented rollback or support stop gate. The action should implement: New-array software changes require an authorized release and verified installation medium for the hardware generation.
B:A visually neat cable installation is insufficient without a command-backed topology and health check. That is a separate post-cabling controller and shelf link verification concern; it does not explain the case: A customer requests an immediate jump to a newer image that has not been approved for the delivered chassis. The governing distinction here is: New-array software changes require an authorized release and verified installation medium for the hardware generation. The governing rule must instead lead to: Stage and apply only the approved installation procedure with a documented rollback or support stop gate.
E:The expected port speed and link health remain stable during a controlled representative workload. That outcome tests a separate switch port speed and error validation concern, not whether the reported problem is fixed: A customer requests an immediate jump to a newer image that has not been approved for the delivered chassis. A directly relevant result would be: The array boots into a supported specified release and health checks show no new faults. The acceptance test needs evidence from: Compare currently installed Purity version, supported target image and downloaded package checksum.