cert
cert-1
cert-2

Pass Juniper JN0-664 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers to Pass the Actual Exam!
30 Days Free Updates, Instant Download!

cert-5
cert-6
JN0-664 Exam - Verified By Experts
JN0-664 Premium File

JN0-664 Premium File

$69.99
$76.99
  • Premium File 96 Questions & Answers. Last Update: Nov 19, 2026

Whats Included:

  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
 
$76.99
$69.99
accept 20 downloads in the last 7 days
block-screenshots
Juniper JN0-664 Practice Test 33

Question 320

A Junos routing design reviewer evaluates an unsafe shortcut in this network customer scenario. A remote provider region contains almost no receivers, yet a proposal floods large streams through every PE by default instead of using join-driven sparse forwarding. Which assumption is MOST DIRECTLY dangerous or unsupported? Select ONE best answer.

  1. Assume every BGP peer that sends the same prefix creates a data-plane ECMP entry even when their route attributes and policies differ.
  2. Enable dense-mode flooding across the entire sparse subscriber backbone solely to correct one missing video stream without evaluating blast radius.
  3. Configure a 232/8 SSM channel for a receiver that only sends unspecified-source IGMPv2 joins and assume it identifies the desired video source.
  4. Assume an ASM PIM-SM network never needs any RP configuration or discovery because IGMP listeners exist at the leaf router.

Explanation

Correct Answer

B:

That conflicts with the edge-to-cloud principle: Dense-mode forwarding generally begins by flooding and pruning, while sparse-mode forwarding builds explicit join-based trees; PIM neighbors and group reachability depend on configuration and topology.

Incorrect Answers

A:

This alternative proposes: Assume every BGP peer that sends the same prefix creates a data-plane ECMP entry even when their route attributes and policies differ. It concerns a different Junos engineering issue BGP multipath equal cost and per-flow forwarding, not the directly tested provider-network issue PIM dense mode versus sparse mode interface deployment.

C:

This alternative proposes: Configure a 232/8 SSM channel for a receiver that only sends unspecified-source IGMPv2 joins and assume it identifies the desired video source. It concerns a different Junos engineering issue Source-specific multicast and IGMPv3 source filtering, not the directly tested provider-network issue PIM dense mode versus sparse mode interface deployment.

D:

This alternative proposes: Assume an ASM PIM-SM network never needs any RP configuration or discovery because IGMP listeners exist at the leaf router. It concerns a different Junos engineering issue PIM sparse mode rendezvous point and shared tree operation, not the directly tested provider-network issue PIM dense mode versus sparse mode interface deployment.

Question 321

A Junos service-provider routing engineer investigates the following routing and service incident: A broadcaster sends to an anycast RP and a receiver near a different RP sees no traffic because cross-RP source state does not propagate as designed. What is the MOST appropriate FIRST action based on the facts given? Select ONE best answer.

  1. Design an eBGP multihop session with explicit remote loopback reachability and appropriate TTL/session transport settings when directly connected peering is not used.
  2. Confirm appropriate PIM sparse-mode RP reachability and registration for any-source multicast groups before treating receiver membership as full service health.
  3. Build resilient ASM rendezvous-point service using supported Anycast RP design and validate source and receiver registration continuity under failover.
  4. Configure and verify source-specific multicast using a sender-and-group channel while ensuring receiver signaling and source reachability support it.

Explanation

Correct Answer

C:

Anycast RP can let multiple RPs share an RP address with protocol mechanisms to coordinate state, but a reachable shared address alone does not prove group information is synchronized. Inspect RP node reachability, anycast route advertisement, appropriate state synchronization, peer status, group registration and service traffic during failover.

Incorrect Answers

A:

This alternative proposes: Design an eBGP multihop session with explicit remote loopback reachability and appropriate TTL/session transport settings when directly connected peering is not used. It concerns a different Junos engineering issue BGP external multihop and loopback peer reachability, not the directly tested provider-network issue Anycast RP resilient multicast service and routing policy.

B:

This alternative proposes: Confirm appropriate PIM sparse-mode RP reachability and registration for any-source multicast groups before treating receiver membership as full service health. It concerns a different Junos engineering issue PIM sparse mode rendezvous point and shared tree operation, not the directly tested provider-network issue Anycast RP resilient multicast service and routing policy.

D:

This alternative proposes: Configure and verify source-specific multicast using a sender-and-group channel while ensuring receiver signaling and source reachability support it. It concerns a different Junos engineering issue Source-specific multicast and IGMPv3 source filtering, not the directly tested provider-network issue Anycast RP resilient multicast service and routing policy.

Question 322

A provider routing design review considers this situation. A broadcaster sends to an anycast RP and a receiver near a different RP sees no traffic because cross-RP source state does not propagate as designed. A colleague proposes: Build resilient ASM rendezvous-point service using supported Anycast RP design and validate source and receiver registration continuity under failover. Which technical principle BEST supports that action? Select ONE best answer.

  1. PIM SSM builds a source-rooted tree without an RP and uses IGMPv3 source inclusion on IPv4 receiver links for explicit source selection.
  2. OSPFv3 uses IPv6-related control-plane processing and link-local neighbor communication; it must be configured and verified according to the selected address family and release.
  3. ASM PIM-SM may use a rendezvous point for rendezvous and shared tree creation, after which routers can move eligible traffic onto source-based trees.
  4. Anycast RP can let multiple RPs share an RP address with protocol mechanisms to coordinate state, but a reachable shared address alone does not prove group information is synchronized.

Explanation

Correct Answer

D:

The relevant Junos service-provider networking principle is: Anycast RP can let multiple RPs share an RP address with protocol mechanisms to coordinate state, but a reachable shared address alone does not prove group information is synchronized. In the described provider-network case (A broadcaster sends to an anycast RP and a receiver near a different RP sees no traffic because cross-RP source state does not propagate as designed.), it supports the planned action: Build resilient ASM rendezvous-point service using supported Anycast RP design and validate source and receiver registration continuity under failover.

Incorrect Answers

A:

This alternative proposes: PIM SSM builds a source-rooted tree without an RP and uses IGMPv3 source inclusion on IPv4 receiver links for explicit source selection. It concerns a different Junos engineering issue Source-specific multicast and IGMPv3 source filtering, not the directly tested provider-network issue Anycast RP resilient multicast service and routing policy.

B:

This alternative proposes: OSPFv3 uses IPv6-related control-plane processing and link-local neighbor communication; it must be configured and verified according to the selected address family and release. It concerns a different Junos engineering issue OSPFv3 IPv6 neighbor and IPv4 separation, not the directly tested provider-network issue Anycast RP resilient multicast service and routing policy.

C:

This alternative proposes: ASM PIM-SM may use a rendezvous point for rendezvous and shared tree creation, after which routers can move eligible traffic onto source-based trees. It concerns a different Junos engineering issue PIM sparse mode rendezvous point and shared tree operation, not the directly tested provider-network issue Anycast RP resilient multicast service and routing policy.

Question 323

A Juniper service-provider engineer needs decisive verification evidence for this situation. A broadcaster sends to an anycast RP and a receiver near a different RP sees no traffic because cross-RP source state does not propagate as designed. Which observation MOST DIRECTLY distinguishes the relevant issue? Select ONE best answer.

  1. Inspect SSM group range, IGMPv3 (S,G) membership, source unicast route, RPF state, PIM joins and actual packet counts.
  2. Inspect source route lookup, multicast RPF information, arrival interface, show multicast route details and topology symmetry.
  3. Inspect RP node reachability, anycast route advertisement, appropriate state synchronization, peer status, group registration and service traffic during failover.
  4. Inspect BGP negotiated family, VPNv6 table, instance.inet6.0, RT import, IPv6 CE routing, next-hop transport and IPv6 forwarding counters.

Explanation

Correct Answer

C:

The direct discriminating observation is: Inspect RP node reachability, anycast route advertisement, appropriate state synchronization, peer status, group registration and service traffic during failover. In the stated situation (A broadcaster sends to an anycast RP and a receiver near a different RP sees no traffic because cross-RP source state does not propagate as designed.), the intended acceptance outcome is: Multicast subscribers continue receiving approved sources when one RP fails, with no duplicate or missing source registration state.

Incorrect Answers

A:

This alternative proposes: Inspect SSM group range, IGMPv3 (S,G) membership, source unicast route, RPF state, PIM joins and actual packet counts. It concerns a different Junos engineering issue Source-specific multicast and IGMPv3 source filtering, not the directly tested provider-network issue Anycast RP resilient multicast service and routing policy.

B:

This alternative proposes: Inspect source route lookup, multicast RPF information, arrival interface, show multicast route details and topology symmetry. It concerns a different Junos engineering issue Multicast RPF validation and source reachability, not the directly tested provider-network issue Anycast RP resilient multicast service and routing policy.

D:

This alternative proposes: Inspect BGP negotiated family, VPNv6 table, instance.inet6.0, RT import, IPv6 CE routing, next-hop transport and IPv6 forwarding counters. It concerns a different Junos engineering issue IPv6 Layer 3 VPN VPNv6 route families and forwarding, not the directly tested provider-network issue Anycast RP resilient multicast service and routing policy.

Question 324

A service-provider acceptance team reviews the result of a provider-service change. A broadcaster sends to an anycast RP and a receiver near a different RP sees no traffic because cross-RP source state does not propagate as designed. The intended verification is: Inspect RP node reachability, anycast route advertisement, appropriate state synchronization, peer status, group registration and service traffic during failover. Which outcome BEST demonstrates success? Select ONE best answer.

  1. Only the subscribed sender's multicast stream reaches intended receivers without relying on an any-source rendezvous point.
  2. Authorized IPv6 subnets communicate across customer sites while overlapping IPv4 tenant routing remains isolated and unchanged.
  3. The traffic arrives on an eligible RPF interface and reaches subscribed downstream links without introducing a multicast loop.
  4. Multicast subscribers continue receiving approved sources when one RP fails, with no duplicate or missing source registration state.

Explanation

Correct Answer

D:

The verified success outcome is: Multicast subscribers continue receiving approved sources when one RP fails, with no duplicate or missing source registration state. Confirm this by: Inspect RP node reachability, anycast route advertisement, appropriate state synchronization, peer status, group registration and service traffic during failover.

Incorrect Answers

A:

This alternative proposes: Only the subscribed sender's multicast stream reaches intended receivers without relying on an any-source rendezvous point. It concerns a different Junos engineering issue Source-specific multicast and IGMPv3 source filtering, not the directly tested provider-network issue Anycast RP resilient multicast service and routing policy.

B:

That option concerns IPv6 Layer 3 VPN VPNv6 route families and forwarding. The related controlled intervention is: Build resilient ASM rendezvous-point service using supported Anycast RP design and validate source and receiver registration continuity under failover.

C:

This alternative proposes: The traffic arrives on an eligible RPF interface and reaches subscribed downstream links without introducing a multicast loop. It concerns a different Junos engineering issue Multicast RPF validation and source reachability, not the directly tested provider-network issue Anycast RP resilient multicast service and routing policy.

Question 325

A Junos routing design reviewer evaluates an unsafe shortcut in this network customer scenario. A broadcaster sends to an anycast RP and a receiver near a different RP sees no traffic because cross-RP source state does not propagate as designed. Which assumption is MOST DIRECTLY dangerous or unsupported? Select ONE best answer.

  1. Advertise the same RP anycast address from two routers without configuring or verifying required RP-state coordination and call the design fully resilient.
  2. Assume an ASM PIM-SM network never needs any RP configuration or discovery because IGMP listeners exist at the leaf router.
  3. Enable dense-mode flooding across the entire sparse subscriber backbone solely to correct one missing video stream without evaluating blast radius.
  4. Configure aggressive route damping globally and assume any withdrawn customer prefix instantly becomes available after its neighbor comes back up.

Explanation

Correct Answer

A:

Apply instead: Build resilient ASM rendezvous-point service using supported Anycast RP design and validate source and receiver registration continuity under failover.

Incorrect Answers

B:

This alternative proposes: Assume an ASM PIM-SM network never needs any RP configuration or discovery because IGMP listeners exist at the leaf router. It concerns a different Junos engineering issue PIM sparse mode rendezvous point and shared tree operation, not the directly tested provider-network issue Anycast RP resilient multicast service and routing policy.

C:

This alternative proposes: Enable dense-mode flooding across the entire sparse subscriber backbone solely to correct one missing video stream without evaluating blast radius. It concerns a different Junos engineering issue PIM dense mode versus sparse mode interface deployment, not the directly tested provider-network issue Anycast RP resilient multicast service and routing policy.

D:

This alternative proposes: Configure aggressive route damping globally and assume any withdrawn customer prefix instantly becomes available after its neighbor comes back up. It concerns a different Junos engineering issue BGP flap damping penalties and recovery, not the directly tested provider-network issue Anycast RP resilient multicast service and routing policy.

Question 326

A Junos service-provider routing engineer investigates the following routing and service incident: An ISP changes multicast routing policy during an RP maintenance event, accidentally suppressing one valid customer group while unrelated groups stay healthy. What is the MOST appropriate FIRST action based on the facts given? Select ONE best answer.

  1. Use reverse-path forwarding checks to determine why an arriving multicast packet is accepted on one interface but discarded on another.
  2. Trace a VPNv4 prefix from MP-BGP reception to a customer VRF routing table, distinguishing provider VPN control-plane storage and installed customer forwarding routes.
  3. Choose PIM dense or sparse behavior according to multicast receiver distribution and verify that each involved interface uses a compatible supported mode.
  4. Build resilient ASM rendezvous-point service using supported Anycast RP design and validate source and receiver registration continuity under failover.

Explanation

Correct Answer

D:

The case-specific routing and services action is: Build resilient ASM rendezvous-point service using supported Anycast RP design and validate source and receiver registration continuity under failover. The governing Junos routing/service principle is: Anycast RP can let multiple RPs share an RP address with protocol mechanisms to coordinate state, but a reachable shared address alone does not prove group information is synchronized.

Incorrect Answers

A:

This alternative proposes: Use reverse-path forwarding checks to determine why an arriving multicast packet is accepted on one interface but discarded on another. It concerns a different Junos engineering issue Multicast RPF validation and source reachability, not the directly tested provider-network issue Anycast RP resilient multicast service and routing policy.

B:

This alternative proposes: Trace a VPNv4 prefix from MP-BGP reception to a customer VRF routing table, distinguishing provider VPN control-plane storage and installed customer forwarding routes. It concerns a different Junos engineering issue VPNv4 bgp.l3vpn.0 versus customer VRF route tables, not the directly tested provider-network issue Anycast RP resilient multicast service and routing policy.

C:

This alternative proposes: Choose PIM dense or sparse behavior according to multicast receiver distribution and verify that each involved interface uses a compatible supported mode. It concerns a different Junos engineering issue PIM dense mode versus sparse mode interface deployment, not the directly tested provider-network issue Anycast RP resilient multicast service and routing policy.

Question 327

A provider routing design review considers this situation. An ISP changes multicast routing policy during an RP maintenance event, accidentally suppressing one valid customer group while unrelated groups stay healthy. A colleague proposes: Build resilient ASM rendezvous-point service using supported Anycast RP design and validate source and receiver registration continuity under failover. Which technical principle BEST supports that action? Select ONE best answer.

  1. Anycast RP can let multiple RPs share an RP address with protocol mechanisms to coordinate state, but a reachable shared address alone does not prove group information is synchronized.
  2. ASM PIM-SM may use a rendezvous point for rendezvous and shared tree creation, after which routers can move eligible traffic onto source-based trees.
  3. Interprovider options vary in whether adjacent ASBRs exchange VRF routes or labeled VPN/transport routes; carrier-of-carriers provides specialized labeled connectivity, not free unrestricted access.
  4. Dense-mode forwarding generally begins by flooding and pruning, while sparse-mode forwarding builds explicit join-based trees; PIM neighbors and group reachability depend on configuration and topology.

Explanation

Correct Answer

A:

The relevant Junos service-provider networking principle is: Anycast RP can let multiple RPs share an RP address with protocol mechanisms to coordinate state, but a reachable shared address alone does not prove group information is synchronized. In the described provider-network case (An ISP changes multicast routing policy during an RP maintenance event, accidentally suppressing one valid customer group while unrelated groups stay healthy.), it supports the planned action: Build resilient ASM rendezvous-point service using supported Anycast RP design and validate source and receiver registration continuity under failover.

Incorrect Answers

B:

This alternative proposes: ASM PIM-SM may use a rendezvous point for rendezvous and shared tree creation, after which routers can move eligible traffic onto source-based trees. It concerns a different Junos engineering issue PIM sparse mode rendezvous point and shared tree operation, not the directly tested provider-network issue Anycast RP resilient multicast service and routing policy.

C:

This alternative proposes: Interprovider options vary in whether adjacent ASBRs exchange VRF routes or labeled VPN/transport routes; carrier-of-carriers provides specialized labeled connectivity, not free unrestricted access. It concerns a different Junos engineering issue Interprovider Layer 3 VPN options and carrier of carriers, not the directly tested provider-network issue Anycast RP resilient multicast service and routing policy.

D:

This alternative proposes: Dense-mode forwarding generally begins by flooding and pruning, while sparse-mode forwarding builds explicit join-based trees; PIM neighbors and group reachability depend on configuration and topology. It concerns a different Junos engineering issue PIM dense mode versus sparse mode interface deployment, not the directly tested provider-network issue Anycast RP resilient multicast service and routing policy.

Question 328

A Juniper service-provider engineer needs decisive verification evidence for this situation. An ISP changes multicast routing policy during an RP maintenance event, accidentally suppressing one valid customer group while unrelated groups stay healthy. Which observation MOST DIRECTLY distinguishes the relevant issue? Select ONE best answer.

  1. Inspect hub and spoke import/export communities, default-route presence, return routes, firewall/NAT policy and VPN-specific forwarding table entries.
  2. Review show pim neighbors, RP mapping, IGMP membership, PIM joins, source registration and multicast forwarding entries for affected groups.
  3. Inspect RP node reachability, anycast route advertisement, appropriate state synchronization, peer status, group registration and service traffic during failover.
  4. Compare protocol mode on all transit interfaces, show pim interfaces/neighbors, joins or pruning state, multicast flow and CPU/link exposure.

Explanation

Correct Answer

C:

The direct discriminating observation is: Inspect RP node reachability, anycast route advertisement, appropriate state synchronization, peer status, group registration and service traffic during failover. In the stated situation (An ISP changes multicast routing policy during an RP maintenance event, accidentally suppressing one valid customer group while unrelated groups stay healthy.), the intended acceptance outcome is: Multicast subscribers continue receiving approved sources when one RP fails, with no duplicate or missing source registration state.

Incorrect Answers

A:

This alternative proposes: Inspect hub and spoke import/export communities, default-route presence, return routes, firewall/NAT policy and VPN-specific forwarding table entries. It concerns a different Junos engineering issue Layer 3 VPN hub spoke topology and controlled Internet breakout, not the directly tested provider-network issue Anycast RP resilient multicast service and routing policy.

B:

This alternative proposes: Review show pim neighbors, RP mapping, IGMP membership, PIM joins, source registration and multicast forwarding entries for affected groups. It concerns a different Junos engineering issue PIM sparse mode rendezvous point and shared tree operation, not the directly tested provider-network issue Anycast RP resilient multicast service and routing policy.

D:

This alternative proposes: Compare protocol mode on all transit interfaces, show pim interfaces/neighbors, joins or pruning state, multicast flow and CPU/link exposure. It concerns a different Junos engineering issue PIM dense mode versus sparse mode interface deployment, not the directly tested provider-network issue Anycast RP resilient multicast service and routing policy.

Question 329

A service-provider acceptance team reviews the result of a provider-service change. An ISP changes multicast routing policy during an RP maintenance event, accidentally suppressing one valid customer group while unrelated groups stay healthy. The intended verification is: Inspect RP node reachability, anycast route advertisement, appropriate state synchronization, peer status, group registration and service traffic during failover. Which outcome BEST demonstrates success? Select ONE best answer.

  1. Multicast subscribers continue receiving approved sources when one RP fails, with no duplicate or missing source registration state.
  2. Only sanctioned customer prefixes are exported, bogons or overly broad aggregates are rejected, and legitimate upstream routes stay available.
  3. The traffic arrives on an eligible RPF interface and reaches subscribed downstream links without introducing a multicast loop.
  4. Only the subscribed sender's multicast stream reaches intended receivers without relying on an any-source rendezvous point.

Explanation

Correct Answer

A:

The verified success outcome is: Multicast subscribers continue receiving approved sources when one RP fails, with no duplicate or missing source registration state. Confirm this by: Inspect RP node reachability, anycast route advertisement, appropriate state synchronization, peer status, group registration and service traffic during failover. The related controlled intervention is: Build resilient ASM rendezvous-point service using supported Anycast RP design and validate source and receiver registration continuity under failover.

Incorrect Answers

B:

That option concerns BGP export import policy and prefix controls. The related controlled intervention is: Build resilient ASM rendezvous-point service using supported Anycast RP design and validate source and receiver registration continuity under failover.

C:

This alternative proposes: The traffic arrives on an eligible RPF interface and reaches subscribed downstream links without introducing a multicast loop. It concerns a different Junos engineering issue Multicast RPF validation and source reachability, not the directly tested provider-network issue Anycast RP resilient multicast service and routing policy.

D:

This alternative proposes: Only the subscribed sender's multicast stream reaches intended receivers without relying on an any-source rendezvous point. It concerns a different Junos engineering issue Source-specific multicast and IGMPv3 source filtering, not the directly tested provider-network issue Anycast RP resilient multicast service and routing policy.

Question 330

A Junos service-provider routing engineer investigates this service-provider network scenario. An ISP changes multicast routing policy during an RP maintenance event, accidentally suppressing one valid customer group while unrelated groups stay healthy. Which TWO complementary steps combine a suitable technical action and its direct verification? Select TWO answers.

  1. Compare protocol mode on all transit interfaces, show pim interfaces/neighbors, joins or pruning state, multicast flow and CPU/link exposure.
  2. Apply explicit import and export routing-policy terms to control which customer or upstream prefixes enter the provider BGP routing domain.
  3. Inspect RP node reachability, anycast route advertisement, appropriate state synchronization, peer status, group registration and service traffic during failover.
  4. Build resilient ASM rendezvous-point service using supported Anycast RP design and validate source and receiver registration continuity under failover.
  5. Validate that all nonbackbone OSPF areas have a supported logical connection to area 0, and use virtual links only as a documented transitional design.

Explanation

Correct Answers

C:

The direct discriminating observation is: Inspect RP node reachability, anycast route advertisement, appropriate state synchronization, peer status, group registration and service traffic during failover.

D:

The case-specific routing and services action is: Build resilient ASM rendezvous-point service using supported Anycast RP design and validate source and receiver registration continuity under failover. The governing Junos routing/service principle is: Anycast RP can let multiple RPs share an RP address with protocol mechanisms to coordinate state, but a reachable shared address alone does not prove group information is synchronized. Verify the decision through: Inspect RP node reachability, anycast route advertisement, appropriate state synchronization, peer status, group registration and service traffic during failover.

Incorrect Answers

A:

This alternative proposes: Compare protocol mode on all transit interfaces, show pim interfaces/neighbors, joins or pruning state, multicast flow and CPU/link exposure. It concerns a different Junos engineering issue PIM dense mode versus sparse mode interface deployment, not the directly tested provider-network issue Anycast RP resilient multicast service and routing policy in the stated situation (An ISP changes multicast routing policy during an RP maintenance event, accidentally suppressing one valid customer group while unrelated groups stay healthy.). A better case-specific check is: Inspect RP node reachability, anycast route advertisement, appropriate state synchronization, peer status, group registration and service traffic during failover.

B:

This alternative proposes: Apply explicit import and export routing-policy terms to control which customer or upstream prefixes enter the provider BGP routing domain. It concerns a different Junos engineering issue BGP export import policy and prefix controls, not the directly tested provider-network issue Anycast RP resilient multicast service and routing policy.

E:

This alternative proposes: Validate that all nonbackbone OSPF areas have a supported logical connection to area 0, and use virtual links only as a documented transitional design. It concerns a different Junos engineering issue OSPF multi-area backbone connectivity and virtual-link limitations, not the directly tested provider-network issue Anycast RP resilient multicast service and routing policy.

Service Provider Routing and Switching, Professional (JNCIP-SP) (JN0-664) Practice Tests