cert
cert-1
cert-2

Pass Juniper JN0-664 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers to Pass the Actual Exam!
30 Days Free Updates, Instant Download!

cert-5
cert-6
JN0-664 Exam - Verified By Experts
JN0-664 Premium File

JN0-664 Premium File

$69.99
$76.99
  • Premium File 96 Questions & Answers. Last Update: Nov 19, 2026

Whats Included:

  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
 
$76.99
$69.99
accept 20 downloads in the last 7 days
block-screenshots
Juniper JN0-664 Practice Test 32

Question 310

A Junos routing design reviewer evaluates an unsafe shortcut in this network customer scenario. A provider migrates an ASM multicast channel to SSM and forgets the source-specific receiver signaling needed for the new design. Which assumption is MOST DIRECTLY dangerous or unsupported? Select ONE best answer.

  1. Assume an ASM PIM-SM network never needs any RP configuration or discovery because IGMP listeners exist at the leaf router.
  2. Configure a 232/8 SSM channel for a receiver that only sends unspecified-source IGMPv2 joins and assume it identifies the desired video source.
  3. Treat an RD as an access-control filter and set identical RDs for every unrelated VPN while leaving permissive RT import policy unrestricted.
  4. Enable receiver IGMP membership on every LAN and assert RPF is irrelevant to the provider's upstream multicast forwarding decisions.

Explanation

Correct Answer

B:

The directly relevant unsafe assumption is: Configure a 232/8 SSM channel for a receiver that only sends unspecified-source IGMPv2 joins and assume it identifies the desired video source. That conflicts with the edge-to-cloud principle: PIM SSM builds a source-rooted tree without an RP and uses IGMPv3 source inclusion on IPv4 receiver links for explicit source selection. Apply instead: Configure and verify source-specific multicast using a sender-and-group channel while ensuring receiver signaling and source reachability support it.

Incorrect Answers

A:

This alternative proposes: Assume an ASM PIM-SM network never needs any RP configuration or discovery because IGMP listeners exist at the leaf router. It concerns a different Junos engineering issue PIM sparse mode rendezvous point and shared tree operation, not the directly tested provider-network issue Source-specific multicast and IGMPv3 source filtering.

C:

This alternative proposes: Treat an RD as an access-control filter and set identical RDs for every unrelated VPN while leaving permissive RT import policy unrestricted. It concerns a different Junos engineering issue Layer 3 VPN route distinguishers versus route targets, not the directly tested provider-network issue Source-specific multicast and IGMPv3 source filtering.

D:

This alternative proposes: Enable receiver IGMP membership on every LAN and assert RPF is irrelevant to the provider's upstream multicast forwarding decisions. It concerns a different Junos engineering issue Multicast RPF validation and source reachability, not the directly tested provider-network issue Source-specific multicast and IGMPv3 source filtering.

Question 311

A Junos service-provider routing engineer investigates the following routing and service incident: A carrier core uses sparse multicast groups but one new transport interface has no PIM adjacency and traffic stops at the boundary. What is the MOST appropriate FIRST action based on the facts given? Select ONE best answer.

  1. Choose PIM dense or sparse behavior according to multicast receiver distribution and verify that each involved interface uses a compatible supported mode.
  2. Verify service MTU and any supported pseudowire encapsulation/control-word expectations when a pseudowire is signaled Up but customer frames fail.
  3. Confirm appropriate PIM sparse-mode RP reachability and registration for any-source multicast groups before treating receiver membership as full service health.
  4. Configure and verify source-specific multicast using a sender-and-group channel while ensuring receiver signaling and source reachability support it.

Explanation

Correct Answer

A:

The case-specific routing and services action is: Choose PIM dense or sparse behavior according to multicast receiver distribution and verify that each involved interface uses a compatible supported mode. The governing Junos routing/service principle is: Dense-mode forwarding generally begins by flooding and pruning, while sparse-mode forwarding builds explicit join-based trees; PIM neighbors and group reachability depend on configuration and topology.

Incorrect Answers

B:

This alternative proposes: Verify service MTU and any supported pseudowire encapsulation/control-word expectations when a pseudowire is signaled Up but customer frames fail. It concerns a different Junos engineering issue Layer 2 pseudowire MTU and control-word interworking, not the directly tested provider-network issue PIM dense mode versus sparse mode interface deployment.

C:

This alternative proposes: Confirm appropriate PIM sparse-mode RP reachability and registration for any-source multicast groups before treating receiver membership as full service health. It concerns a different Junos engineering issue PIM sparse mode rendezvous point and shared tree operation, not the directly tested provider-network issue PIM dense mode versus sparse mode interface deployment.

D:

This alternative proposes: Configure and verify source-specific multicast using a sender-and-group channel while ensuring receiver signaling and source reachability support it. It concerns a different Junos engineering issue Source-specific multicast and IGMPv3 source filtering, not the directly tested provider-network issue PIM dense mode versus sparse mode interface deployment.

Question 312

A provider routing design review considers this situation. A carrier core uses sparse multicast groups but one new transport interface has no PIM adjacency and traffic stops at the boundary. A colleague proposes: Choose PIM dense or sparse behavior according to multicast receiver distribution and verify that each involved interface uses a compatible supported mode. Which technical principle BEST supports that action? Select ONE best answer.

  1. Anycast RP can let multiple RPs share an RP address with protocol mechanisms to coordinate state, but a reachable shared address alone does not prove group information is synchronized.
  2. IS-IS elects a DIS on a broadcast segment to originate pseudonode information; it has no OSPF-style separately elected backup designated router, and election behavior differs.
  3. Dense-mode forwarding generally begins by flooding and pruning, while sparse-mode forwarding builds explicit join-based trees; PIM neighbors and group reachability depend on configuration and topology.
  4. Multicast RPF checks the expected upstream interface toward the source using relevant routing information; correct downstream membership cannot compensate for a failed upstream RPF check.

Explanation

Correct Answer

C:

The relevant Junos service-provider networking principle is: Dense-mode forwarding generally begins by flooding and pruning, while sparse-mode forwarding builds explicit join-based trees; PIM neighbors and group reachability depend on configuration and topology. In the described provider-network case (A carrier core uses sparse multicast groups but one new transport interface has no PIM adjacency and traffic stops at the boundary.), it supports the planned action: Choose PIM dense or sparse behavior according to multicast receiver distribution and verify that each involved interface uses a compatible supported mode.

Incorrect Answers

A:

This alternative proposes: Anycast RP can let multiple RPs share an RP address with protocol mechanisms to coordinate state, but a reachable shared address alone does not prove group information is synchronized. It concerns a different Junos engineering issue Anycast RP resilient multicast service and routing policy, not the directly tested provider-network issue PIM dense mode versus sparse mode interface deployment.

B:

This alternative proposes: IS-IS elects a DIS on a broadcast segment to originate pseudonode information; it has no OSPF-style separately elected backup designated router, and election behavior differs. It concerns a different Junos engineering issue IS-IS DIS pseudonode and broadcast circuit election, not the directly tested provider-network issue PIM dense mode versus sparse mode interface deployment.

D:

This alternative proposes: Multicast RPF checks the expected upstream interface toward the source using relevant routing information; correct downstream membership cannot compensate for a failed upstream RPF check. It concerns a different Junos engineering issue Multicast RPF validation and source reachability, not the directly tested provider-network issue PIM dense mode versus sparse mode interface deployment.

Question 313

A Juniper service-provider engineer needs decisive verification evidence for this situation. A carrier core uses sparse multicast groups but one new transport interface has no PIM adjacency and traffic stops at the boundary. Which observation MOST DIRECTLY distinguishes the relevant issue? Select ONE best answer.

  1. Compare protocol mode on all transit interfaces, show pim interfaces/neighbors, joins or pruning state, multicast flow and CPU/link exposure.
  2. Review CE dual-homing advertisements, SoO community tags, OSPF route type/cost, sham-link endpoint reachability and import/export policy.
  3. Inspect SSM group range, IGMPv3 (S,G) membership, source unicast route, RPF state, PIM joins and actual packet counts.
  4. Inspect source route lookup, multicast RPF information, arrival interface, show multicast route details and topology symmetry.

Explanation

Correct Answer

A:

The direct discriminating observation is: Compare protocol mode on all transit interfaces, show pim interfaces/neighbors, joins or pruning state, multicast flow and CPU/link exposure. In the stated situation (A carrier core uses sparse multicast groups but one new transport interface has no PIM adjacency and traffic stops at the boundary.), the intended acceptance outcome is: The configured mode serves actual receivers without uncontrolled multicast flood in sparsely subscribed provider regions.

Incorrect Answers

B:

This alternative proposes: Review CE dual-homing advertisements, SoO community tags, OSPF route type/cost, sham-link endpoint reachability and import/export policy. It concerns a different Junos engineering issue Site of Origin and OSPF sham-link loop control, not the directly tested provider-network issue PIM dense mode versus sparse mode interface deployment.

C:

This alternative proposes: Inspect SSM group range, IGMPv3 (S,G) membership, source unicast route, RPF state, PIM joins and actual packet counts. It concerns a different Junos engineering issue Source-specific multicast and IGMPv3 source filtering, not the directly tested provider-network issue PIM dense mode versus sparse mode interface deployment.

D:

This alternative proposes: Inspect source route lookup, multicast RPF information, arrival interface, show multicast route details and topology symmetry. It concerns a different Junos engineering issue Multicast RPF validation and source reachability, not the directly tested provider-network issue PIM dense mode versus sparse mode interface deployment.

Question 314

A service-provider acceptance team reviews the result of a provider-service change. A carrier core uses sparse multicast groups but one new transport interface has no PIM adjacency and traffic stops at the boundary. The intended verification is: Compare protocol mode on all transit interfaces, show pim interfaces/neighbors, joins or pruning state, multicast flow and CPU/link exposure. Which outcome BEST demonstrates success? Select ONE best answer.

  1. Only the subscribed sender's multicast stream reaches intended receivers without relying on an any-source rendezvous point.
  2. The traffic arrives on an eligible RPF interface and reaches subscribed downstream links without introducing a multicast loop.
  3. The configured mode serves actual receivers without uncontrolled multicast flood in sparsely subscribed provider regions.
  4. The appropriate PEs establish only the requested customer Layer 2 connections and do not merge different customer switching domains.

Explanation

Correct Answer

C:

The verified success outcome is: The configured mode serves actual receivers without uncontrolled multicast flood in sparsely subscribed provider regions. Confirm this by: Compare protocol mode on all transit interfaces, show pim interfaces/neighbors, joins or pruning state, multicast flow and CPU/link exposure.

Incorrect Answers

A:

This alternative proposes: Only the subscribed sender's multicast stream reaches intended receivers without relying on an any-source rendezvous point. It concerns a different Junos engineering issue Source-specific multicast and IGMPv3 source filtering, not the directly tested provider-network issue PIM dense mode versus sparse mode interface deployment.

B:

This alternative proposes: The traffic arrives on an eligible RPF interface and reaches subscribed downstream links without introducing a multicast loop. It concerns a different Junos engineering issue Multicast RPF validation and source reachability, not the directly tested provider-network issue PIM dense mode versus sparse mode interface deployment.

D:

That option concerns BGP-signaled Layer 2 VPN NLRI and route target import. The related controlled intervention is: Choose PIM dense or sparse behavior according to multicast receiver distribution and verify that each involved interface uses a compatible supported mode.

Question 315

A Junos service-provider routing engineer investigates this service-provider network scenario. A carrier core uses sparse multicast groups but one new transport interface has no PIM adjacency and traffic stops at the boundary. Which TWO complementary steps combine a suitable technical action and its direct verification? Select TWO answers.

  1. Map traffic into the intended forwarding classes and packet-loss priority settings before assigning egress queue resources.
  2. Inspect source route lookup, multicast RPF information, arrival interface, show multicast route details and topology symmetry.
  3. Compare protocol mode on all transit interfaces, show pim interfaces/neighbors, joins or pruning state, multicast flow and CPU/link exposure.
  4. Choose PIM dense or sparse behavior according to multicast receiver distribution and verify that each involved interface uses a compatible supported mode.
  5. Validate that all nonbackbone OSPF areas have a supported logical connection to area 0, and use virtual links only as a documented transitional design.

Explanation

Correct Answers

C:

The direct discriminating observation is: Compare protocol mode on all transit interfaces, show pim interfaces/neighbors, joins or pruning state, multicast flow and CPU/link exposure.

D:

The case-specific routing and services action is: Choose PIM dense or sparse behavior according to multicast receiver distribution and verify that each involved interface uses a compatible supported mode. The governing Junos routing/service principle is: Dense-mode forwarding generally begins by flooding and pruning, while sparse-mode forwarding builds explicit join-based trees; PIM neighbors and group reachability depend on configuration and topology. Verify the decision through: Compare protocol mode on all transit interfaces, show pim interfaces/neighbors, joins or pruning state, multicast flow and CPU/link exposure.

Incorrect Answers

A:

This alternative proposes: Map traffic into the intended forwarding classes and packet-loss priority settings before assigning egress queue resources. It concerns a different Junos engineering issue CoS forwarding classes packet-loss priority and egress queue binding, not the directly tested provider-network issue PIM dense mode versus sparse mode interface deployment.

B:

This alternative proposes: Inspect source route lookup, multicast RPF information, arrival interface, show multicast route details and topology symmetry. It concerns a different Junos engineering issue Multicast RPF validation and source reachability, not the directly tested provider-network issue PIM dense mode versus sparse mode interface deployment in the stated situation (A carrier core uses sparse multicast groups but one new transport interface has no PIM adjacency and traffic stops at the boundary.). A better case-specific check is: Compare protocol mode on all transit interfaces, show pim interfaces/neighbors, joins or pruning state, multicast flow and CPU/link exposure.

E:

This alternative proposes: Validate that all nonbackbone OSPF areas have a supported logical connection to area 0, and use virtual links only as a documented transitional design. It concerns a different Junos engineering issue OSPF multi-area backbone connectivity and virtual-link limitations, not the directly tested provider-network issue PIM dense mode versus sparse mode interface deployment.

Question 316

A Junos service-provider routing engineer investigates the following routing and service incident: A remote provider region contains almost no receivers, yet a proposal floods large streams through every PE by default instead of using join-driven sparse forwarding. What is the MOST appropriate FIRST action based on the facts given? Select ONE best answer.

  1. Build resilient ASM rendezvous-point service using supported Anycast RP design and validate source and receiver registration continuity under failover.
  2. Verify IPv6 customer prefixes across a supported L3VPN by checking VPNv6 MP-BGP family, route targets and IPv6 customer forwarding independently of IPv4 VPNv4 behavior.
  3. Choose PIM dense or sparse behavior according to multicast receiver distribution and verify that each involved interface uses a compatible supported mode.
  4. Use reverse-path forwarding checks to determine why an arriving multicast packet is accepted on one interface but discarded on another.

Explanation

Correct Answer

C:

The case-specific routing and services action is: Choose PIM dense or sparse behavior according to multicast receiver distribution and verify that each involved interface uses a compatible supported mode.

Incorrect Answers

A:

This alternative proposes: Build resilient ASM rendezvous-point service using supported Anycast RP design and validate source and receiver registration continuity under failover. It concerns a different Junos engineering issue Anycast RP resilient multicast service and routing policy, not the directly tested provider-network issue PIM dense mode versus sparse mode interface deployment.

B:

This alternative proposes: Verify IPv6 customer prefixes across a supported L3VPN by checking VPNv6 MP-BGP family, route targets and IPv6 customer forwarding independently of IPv4 VPNv4 behavior. It concerns a different Junos engineering issue IPv6 Layer 3 VPN VPNv6 route families and forwarding, not the directly tested provider-network issue PIM dense mode versus sparse mode interface deployment.

D:

This alternative proposes: Use reverse-path forwarding checks to determine why an arriving multicast packet is accepted on one interface but discarded on another. It concerns a different Junos engineering issue Multicast RPF validation and source reachability, not the directly tested provider-network issue PIM dense mode versus sparse mode interface deployment.

Question 317

A provider routing design review considers this situation. A remote provider region contains almost no receivers, yet a proposal floods large streams through every PE by default instead of using join-driven sparse forwarding. A colleague proposes: Choose PIM dense or sparse behavior according to multicast receiver distribution and verify that each involved interface uses a compatible supported mode. Which technical principle BEST supports that action? Select ONE best answer.

  1. Anycast RP can let multiple RPs share an RP address with protocol mechanisms to coordinate state, but a reachable shared address alone does not prove group information is synchronized.
  2. Dense-mode forwarding generally begins by flooding and pruning, while sparse-mode forwarding builds explicit join-based trees; PIM neighbors and group reachability depend on configuration and topology.
  3. Multicast RPF checks the expected upstream interface toward the source using relevant routing information; correct downstream membership cannot compensate for a failed upstream RPF check.
  4. MP-BGP carries routes for negotiated address families and associated path attributes; mismatched family configuration can block specific NLRI even when the underlying BGP session remains up.

Explanation

Correct Answer

B:

The relevant Junos service-provider networking principle is: Dense-mode forwarding generally begins by flooding and pruning, while sparse-mode forwarding builds explicit join-based trees; PIM neighbors and group reachability depend on configuration and topology. In the described provider-network case (A remote provider region contains almost no receivers, yet a proposal floods large streams through every PE by default instead of using join-driven sparse forwarding.), it supports the planned action: Choose PIM dense or sparse behavior according to multicast receiver distribution and verify that each involved interface uses a compatible supported mode.

Incorrect Answers

A:

This alternative proposes: Anycast RP can let multiple RPs share an RP address with protocol mechanisms to coordinate state, but a reachable shared address alone does not prove group information is synchronized. It concerns a different Junos engineering issue Anycast RP resilient multicast service and routing policy, not the directly tested provider-network issue PIM dense mode versus sparse mode interface deployment.

C:

This alternative proposes: Multicast RPF checks the expected upstream interface toward the source using relevant routing information; correct downstream membership cannot compensate for a failed upstream RPF check. It concerns a different Junos engineering issue Multicast RPF validation and source reachability, not the directly tested provider-network issue PIM dense mode versus sparse mode interface deployment.

D:

This alternative proposes: MP-BGP carries routes for negotiated address families and associated path attributes; mismatched family configuration can block specific NLRI even when the underlying BGP session remains up. It concerns a different Junos engineering issue Multiprotocol BGP family negotiations and VPN routes, not the directly tested provider-network issue PIM dense mode versus sparse mode interface deployment.

Question 318

A Juniper service-provider engineer needs decisive verification evidence for this situation. A remote provider region contains almost no receivers, yet a proposal floods large streams through every PE by default instead of using join-driven sparse forwarding. Which observation MOST DIRECTLY distinguishes the relevant issue? Select ONE best answer.

  1. Inspect SSM group range, IGMPv3 (S,G) membership, source unicast route, RPF state, PIM joins and actual packet counts.
  2. Review route-policy terms, L1 and L2 route databases, leaked prefix entries, interface scope and next-hop resolution from affected access devices.
  3. Compare protocol mode on all transit interfaces, show pim interfaces/neighbors, joins or pruning state, multicast flow and CPU/link exposure.
  4. Inspect source route lookup, multicast RPF information, arrival interface, show multicast route details and topology symmetry.

Explanation

Correct Answer

C:

The direct discriminating observation is: Compare protocol mode on all transit interfaces, show pim interfaces/neighbors, joins or pruning state, multicast flow and CPU/link exposure. In the stated situation (A remote provider region contains almost no receivers, yet a proposal floods large streams through every PE by default instead of using join-driven sparse forwarding.), the intended acceptance outcome is: The configured mode serves actual receivers without uncontrolled multicast flood in sparsely subscribed provider regions.

Incorrect Answers

A:

This alternative proposes: Inspect SSM group range, IGMPv3 (S,G) membership, source unicast route, RPF state, PIM joins and actual packet counts. It concerns a different Junos engineering issue Source-specific multicast and IGMPv3 source filtering, not the directly tested provider-network issue PIM dense mode versus sparse mode interface deployment.

B:

This alternative proposes: Review route-policy terms, L1 and L2 route databases, leaked prefix entries, interface scope and next-hop resolution from affected access devices. It concerns a different Junos engineering issue IS-IS Level 2 to Level 1 route leaking and summaries, not the directly tested provider-network issue PIM dense mode versus sparse mode interface deployment.

D:

This alternative proposes: Inspect source route lookup, multicast RPF information, arrival interface, show multicast route details and topology symmetry. It concerns a different Junos engineering issue Multicast RPF validation and source reachability, not the directly tested provider-network issue PIM dense mode versus sparse mode interface deployment.

Question 319

A service-provider acceptance team reviews the result of a provider-service change. A remote provider region contains almost no receivers, yet a proposal floods large streams through every PE by default instead of using join-driven sparse forwarding. The intended verification is: Compare protocol mode on all transit interfaces, show pim interfaces/neighbors, joins or pruning state, multicast flow and CPU/link exposure. Which outcome BEST demonstrates success? Select ONE best answer.

  1. The traffic arrives on an eligible RPF interface and reaches subscribed downstream links without introducing a multicast loop.
  2. The configured mode serves actual receivers without uncontrolled multicast flood in sparsely subscribed provider regions.
  3. Only the subscribed sender's multicast stream reaches intended receivers without relying on an any-source rendezvous point.
  4. The approved egress wins for the expected prefix for documented policy reasons, with a valid alternate when the preferred transit fails.

Explanation

Correct Answer

B:

The verified success outcome is: The configured mode serves actual receivers without uncontrolled multicast flood in sparsely subscribed provider regions. Confirm this by: Compare protocol mode on all transit interfaces, show pim interfaces/neighbors, joins or pruning state, multicast flow and CPU/link exposure. The related controlled intervention is: Choose PIM dense or sparse behavior according to multicast receiver distribution and verify that each involved interface uses a compatible supported mode.

Incorrect Answers

A:

This alternative proposes: The traffic arrives on an eligible RPF interface and reaches subscribed downstream links without introducing a multicast loop. It concerns a different Junos engineering issue Multicast RPF validation and source reachability, not the directly tested provider-network issue PIM dense mode versus sparse mode interface deployment.

C:

This alternative proposes: Only the subscribed sender's multicast stream reaches intended receivers without relying on an any-source rendezvous point. It concerns a different Junos engineering issue Source-specific multicast and IGMPv3 source filtering, not the directly tested provider-network issue PIM dense mode versus sparse mode interface deployment.

D:

That option concerns BGP best-path attributes and local preference. The related controlled intervention is: Choose PIM dense or sparse behavior according to multicast receiver distribution and verify that each involved interface uses a compatible supported mode.

Question 320

A Junos routing design reviewer evaluates an unsafe shortcut in this network customer scenario. A remote provider region contains almost no receivers, yet a proposal floods large streams through every PE by default instead of using join-driven sparse forwarding. Which assumption is MOST DIRECTLY dangerous or unsupported? Select ONE best answer.

  1. Assume every BGP peer that sends the same prefix creates a data-plane ECMP entry even when their route attributes and policies differ.
  2. Enable dense-mode flooding across the entire sparse subscriber backbone solely to correct one missing video stream without evaluating blast radius.
  3. Configure a 232/8 SSM channel for a receiver that only sends unspecified-source IGMPv2 joins and assume it identifies the desired video source.
  4. Assume an ASM PIM-SM network never needs any RP configuration or discovery because IGMP listeners exist at the leaf router.

Explanation

Correct Answer

B:

That conflicts with the edge-to-cloud principle: Dense-mode forwarding generally begins by flooding and pruning, while sparse-mode forwarding builds explicit join-based trees; PIM neighbors and group reachability depend on configuration and topology.

Incorrect Answers

A:

This alternative proposes: Assume every BGP peer that sends the same prefix creates a data-plane ECMP entry even when their route attributes and policies differ. It concerns a different Junos engineering issue BGP multipath equal cost and per-flow forwarding, not the directly tested provider-network issue PIM dense mode versus sparse mode interface deployment.

C:

This alternative proposes: Configure a 232/8 SSM channel for a receiver that only sends unspecified-source IGMPv2 joins and assume it identifies the desired video source. It concerns a different Junos engineering issue Source-specific multicast and IGMPv3 source filtering, not the directly tested provider-network issue PIM dense mode versus sparse mode interface deployment.

D:

This alternative proposes: Assume an ASM PIM-SM network never needs any RP configuration or discovery because IGMP listeners exist at the leaf router. It concerns a different Junos engineering issue PIM sparse mode rendezvous point and shared tree operation, not the directly tested provider-network issue PIM dense mode versus sparse mode interface deployment.

Service Provider Routing and Switching, Professional (JNCIP-SP) (JN0-664) Practice Tests