cert
cert-1
cert-2

Pass Fortinet NSE5_FSW_AD-7.6 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers to Pass the Actual Exam!
30 Days Free Updates, Instant Download!

cert-5
cert-6
NSE5_FSW_AD-7.6 Exam - Verified By Experts
NSE5_FSW_AD-7.6 Premium File

NSE5_FSW_AD-7.6 Premium File

$69.99
$76.99
  • Premium File 64 Questions & Answers. Last Update: Nov 15, 2026

Whats Included:

  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
 
$76.99
$69.99
accept 42 downloads in the last 7 days
block-screenshots
Fortinet NSE5_FSW_AD-7.6 Practice Test 52

Question 510

A trunk member reports no traffic despite all LACP member LEDs appearing green. Which FortiSwitch configuration or corrective action BEST addresses the requirement?

  1. Verify FortiLink management status and user VLAN reachability independently when a switch is authorized but clients fail.
  2. Distinguish FortiSwitch discovery from authorization, and restore the correct controller ownership without automatically trusting unknown devices.
  3. Use FortiGate FortiSwitch Ports statistics or supported switch commands to isolate errors, utilization and port status at the right location.
  4. Assign the intended untagged native VLAN and explicitly permit tagged VLANs on an uplink; compare both ends before cutover.

Explanation

Correct Answer

C:

Use FortiGate FortiSwitch Ports statistics or supported switch commands to isolate errors, utilization and port status at the right location. A port-up indicator or one successful ping is not proof that a congested or errored uplink is healthy. Verify the action with: Review frame error type, CRC/FCS, traffic rates, drops, operational speed, port description and sampled timestamps.

Incorrect Answers

A:

Verify FortiLink management status and user VLAN reachability independently when a switch is authorized but clients fail. This action is relevant to FortiLink control and client VLAN transport separation, not the controlling requirement in this case. FortiLink transports management and data; a successful controller heartbeat does not guarantee a user VLAN or firewall session is permitted. The targeted response is: Use FortiGate FortiSwitch Ports statistics or supported switch commands to isolate errors, utilization and port status at the right location.

B:

Distinguish FortiSwitch discovery from authorization, and restore the correct controller ownership without automatically trusting unknown devices. This action is relevant to Controller authorization and pending-switch state, not the controlling requirement in this case. Authorizing a switch is an administrative trust step; pending switch state is not evidence of a routing failure. The targeted response is: Use FortiGate FortiSwitch Ports statistics or supported switch commands to isolate errors, utilization and port status at the right location.

D:

Assign the intended untagged native VLAN and explicitly permit tagged VLANs on an uplink; compare both ends before cutover. This action is relevant to FortiSwitch native VLAN versus allowed VLANs, not the controlling requirement in this case. Native VLAN handling and tagged VLAN membership are different controls; a working physical link does not validate VLAN carriage. The targeted response is: Use FortiGate FortiSwitch Ports statistics or supported switch commands to isolate errors, utilization and port status at the right location.

Question 511

A branch turns off 802.1X to fix an outage and inadvertently permits visitors onto production VLANs. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. Approved legacy devices gain only restricted services while unknown or spoofed MAC addresses remain constrained.
  2. A redundant topology recovers after a link failure without simultaneous independent forwarding paths causing loops.
  3. Authorized endpoints enter only permitted VLANs while failed authentication is denied or restricted according to policy.
  4. Spoofed ARP replies are dropped while legitimate endpoints maintain gateway ARP resolution.

Explanation

Correct Answer

C:

Authorized endpoints enter only permitted VLANs while failed authentication is denied or restricted according to policy. A physical link can be up while 802.1X blocks traffic; the switch is the authenticator, not the authentication server.

Incorrect Answers

A:

Approved legacy devices gain only restricted services while unknown or spoofed MAC addresses remain constrained. This result relates to MAC-based authentication and restricted legacy devices, not the acceptance condition under test. The relevant result is: Authorized endpoints enter only permitted VLANs while failed authentication is denied or restricted according to policy.

B:

A redundant topology recovers after a link failure without simultaneous independent forwarding paths causing loops. This result relates to FortiLink split-interface and standby path design, not the acceptance condition under test. The relevant result is: Authorized endpoints enter only permitted VLANs while failed authentication is denied or restricted according to policy.

D:

Spoofed ARP replies are dropped while legitimate endpoints maintain gateway ARP resolution. This result relates to Dynamic ARP inspection with DHCP snooping bindings, not the acceptance condition under test. The relevant result is: Authorized endpoints enter only permitted VLANs while failed authentication is denied or restricted according to policy.

Question 512

A client cannot reach DHCP and an analyst captures a trunk that does not carry that client VLAN. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Inspect MCLAG peer group, peer-link status, LACP members, VLAN consistency and split-brain safeguards.
  2. Check captured port, protocol/MAC/IP filter, platform buffer capacity, capture timestamps and exported packet headers.
  3. Review frame error type, CRC/FCS, traffic rates, drops, operational speed, port description and sampled timestamps.
  4. Inspect controller switch list, interface events, authentication logs, current configuration, timestamps and recent change history.

Explanation

Correct Answer

B:

Check captured port, protocol/MAC/IP filter, platform buffer capacity, capture timestamps and exported packet headers. Packet captures are interface and filter scoped, and platform buffer limits differ; a capture file is not proof of all traffic on every switch port. The paired action is: Create a bounded packet-capture profile on the right switch interface with a narrow filter, then start/stop and inspect frames.

Incorrect Answers

A:

Inspect MCLAG peer group, peer-link status, LACP members, VLAN consistency and split-brain safeguards. These observations are applicable to MCLAG multichassis access redundancy, but would not isolate the main failure first. The decisive evidence is: Check captured port, protocol/MAC/IP filter, platform buffer capacity, capture timestamps and exported packet headers.

C:

Review frame error type, CRC/FCS, traffic rates, drops, operational speed, port description and sampled timestamps. These observations are applicable to Managed switch port statistics and counter analysis, but would not isolate the main failure first. The decisive evidence is: Check captured port, protocol/MAC/IP filter, platform buffer capacity, capture timestamps and exported packet headers.

D:

Inspect controller switch list, interface events, authentication logs, current configuration, timestamps and recent change history. These observations are applicable to FortiSwitch diagnostic commands and logs, but would not isolate the main failure first. The decisive evidence is: Check captured port, protocol/MAC/IP filter, platform buffer capacity, capture timestamps and exported packet headers.

Question 513

An attacker spoofs the default gateway MAC using gratuitous ARP on a guest user VLAN. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Inspect DHCP server permitted list, Option 82 insertion/trust state, relay path, client bindings and lease evidence.
  2. Inspect ARP inspection status, DHCP snooping binding database, source MAC/IP, trusted ports and violation logs.
  3. Inspect the port native VLAN, allowed VLAN list, peer tags, learned MACs and relevant FortiGate VLAN interface.
  4. Inspect frame-rate counters by class, threshold configuration, affected VLANs and protocol health under controlled load.

Explanation

Correct Answer

B:

Inspect ARP inspection status, DHCP snooping binding database, source MAC/IP, trusted ports and violation logs. DAI validation needs a reliable binding or exception policy; enabling it blindly can interrupt static-IP devices. The paired action is: Use supported dynamic ARP inspection with valid switch bindings to reject spoofed IP-MAC claims at untrusted edges.

Incorrect Answers

A:

Inspect DHCP server permitted list, Option 82 insertion/trust state, relay path, client bindings and lease evidence. These observations are applicable to DHCP server allowlist and Option 82 validation, but would not isolate the main failure first. The decisive evidence is: Inspect ARP inspection status, DHCP snooping binding database, source MAC/IP, trusted ports and violation logs.

C:

Inspect the port native VLAN, allowed VLAN list, peer tags, learned MACs and relevant FortiGate VLAN interface. These observations are applicable to FortiSwitch native VLAN versus allowed VLANs, but would not isolate the main failure first. The decisive evidence is: Inspect ARP inspection status, DHCP snooping binding database, source MAC/IP, trusted ports and violation logs.

D:

Inspect frame-rate counters by class, threshold configuration, affected VLANs and protocol health under controlled load. These observations are applicable to Storm-control thresholds and broadcast containment, but would not isolate the main failure first. The decisive evidence is: Inspect ARP inspection status, DHCP snooping binding database, source MAC/IP, trusted ports and violation logs.

Question 514

A direct switch connection works until the FortiGate port is repurposed into another software-switch aggregate. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Review firmware compatibility, release notes, current image, boot fallback, managed switch inventory and upgrade sequencing.
  2. Inspect controller VDOM ownership, VLAN interface parent, port mapping, session policy and IP/routing separation.
  3. Inspect FortiLink mode, physical or aggregate link state, switch authorization, VLAN interfaces and test-client path.
  4. Inspect port profile assignment, FortiGate controller policy, client role, enforcement counters and overlapping static controls.

Explanation

Correct Answer

C:

Inspect FortiLink mode, physical or aggregate link state, switch authorization, VLAN interfaces and test-client path. FortiLink carries management and data traffic; a valid management handshake does not prove every user VLAN is forwarded. The paired action is: Use a supported direct FortiLink connection and confirm controller traffic and client forwarding on the intended interfaces.

Incorrect Answers

A:

Review firmware compatibility, release notes, current image, boot fallback, managed switch inventory and upgrade sequencing. These observations are applicable to Firmware and lifecycle preparation for FortiSwitch, but would not isolate the main failure first. The decisive evidence is: Inspect FortiLink mode, physical or aggregate link state, switch authorization, VLAN interfaces and test-client path.

B:

Inspect controller VDOM ownership, VLAN interface parent, port mapping, session policy and IP/routing separation. These observations are applicable to FortiGate VDOM-based FortiSwitch tenant assignment, but would not isolate the main failure first. The decisive evidence is: Inspect FortiLink mode, physical or aggregate link state, switch authorization, VLAN interfaces and test-client path.

D:

Inspect port profile assignment, FortiGate controller policy, client role, enforcement counters and overlapping static controls. These observations are applicable to FortiSwitch security profile application and precedence, but would not isolate the main failure first. The decisive evidence is: Inspect FortiLink mode, physical or aggregate link state, switch authorization, VLAN interfaces and test-client path.

Question 515

An added FortiSwitch uplink remains individual because its peer LACP mode is incompatible. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. A capable handset reports the expected voice network policy and traffic uses the correct VLAN.
  2. Expected members join the trunk and survive a member disconnect without loops or silent black holes.
  3. Phones and access points receive stable allocated power while redundant PSU and priority policies remain within budget.
  4. A moved device is traced to its current approved port and incorrect cross-connection is identified.

Explanation

Correct Answer

B:

Expected members join the trunk and survive a member disconnect without loops or silent black holes. One healthy physical link is not proof an aggregate has balanced traffic or that the peer LACP policy matches.

Incorrect Answers

A:

A capable handset reports the expected voice network policy and traffic uses the correct VLAN. This result relates to LLDP-MED voice network policy advertisements, not the acceptance condition under test. The relevant result is: Expected members join the trunk and survive a member disconnect without loops or silent black holes.

C:

Phones and access points receive stable allocated power while redundant PSU and priority policies remain within budget. This result relates to PoE and LLDP-MED endpoint power coordination, not the acceptance condition under test. The relevant result is: Expected members join the trunk and survive a member disconnect without loops or silent black holes.

D:

A moved device is traced to its current approved port and incorrect cross-connection is identified. This result relates to LLDP and MAC forwarding table extraction, not the acceptance condition under test. The relevant result is: Expected members join the trunk and survive a member disconnect without loops or silent black holes.

Question 516

An organization disconnects FortiLink to deploy standalone management but fails to assign a reachable management IP and default route. Which FortiSwitch configuration or corrective action BEST addresses the requirement?

  1. Set a supported default route or precise static prefix toward a reachable next hop and validate return traffic.
  2. Build FortiSwitch VLAN interfaces in the correct FortiLink context and assign ports through the managed switch controller.
  3. Prepare supported provisioning, DHCP, management connectivity and secure bootstrap before assuming a factory-default FortiSwitch will auto-configure.
  4. Determine whether a switch is managed by FortiGate or standalone before setting interfaces, routes or admin policies.

Explanation

Correct Answer

D:

Determine whether a switch is managed by FortiGate or standalone before setting interfaces, routes or admin policies. Direct edits on a managed switch can be overridden; standalone configuration must be maintained and backed up independently. Verify the action with: Inspect FortiLink operational mode, controller ownership, current management address, VDOM and switch model support.

Incorrect Answers

A:

Set a supported default route or precise static prefix toward a reachable next hop and validate return traffic. This action is relevant to Static route and default gateway validation, not the controlling requirement in this case. A default route cannot repair local VLAN tagging or a missing neighbor resolution condition. The targeted response is: Determine whether a switch is managed by FortiGate or standalone before setting interfaces, routes or admin policies.

B:

Build FortiSwitch VLAN interfaces in the correct FortiLink context and assign ports through the managed switch controller. This action is relevant to FortiGate managed FortiSwitch VLAN interface placement, not the controlling requirement in this case. A named VLAN in FortiOS is not proof its switch-port membership and L3 policy are correct. The targeted response is: Determine whether a switch is managed by FortiGate or standalone before setting interfaces, routes or admin policies.

C:

Prepare supported provisioning, DHCP, management connectivity and secure bootstrap before assuming a factory-default FortiSwitch will auto-configure. This action is relevant to Zero-touch provisioning and controller dependency checks, not the controlling requirement in this case. Zero-touch deployment works only when the necessary discovery path and identity checks function; a link LED is insufficient. The targeted response is: Determine whether a switch is managed by FortiGate or standalone before setting interfaces, routes or admin policies.

Question 517

A QoS change trusts 802.1p tags from a server port that should be an untagged client interface. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. Determine whether a switch is managed by FortiGate or standalone before setting interfaces, routes or admin policies.
  2. An unexpected additional device is restricted or signaled without knocking out approved business equipment.
  3. Inspect incoming 802.1p and DSCP markings, trust mode, QoS map, physical port and classification counters.
  4. Define appropriate trusted ingress marking sources and classify untrusted frames before choosing egress queues.
  5. Check FortiLink parent, VLAN ID, VDOM membership, port assignment, subnet and firewall-policy path.

Explanation

Correct Answers

C:

Inspect incoming 802.1p and DSCP markings, trust mode, QoS map, physical port and classification counters. A packet marking has no useful QoS effect until supported classification and scheduling map it consistently. The paired action is: Define appropriate trusted ingress marking sources and classify untrusted frames before choosing egress queues. This is the diagnostic or verification half of the requested TWO-step pair.

D:

Define appropriate trusted ingress marking sources and classify untrusted frames before choosing egress queues. A packet marking has no useful QoS effect until supported classification and scheduling map it consistently. Verify the action with: Inspect incoming 802.1p and DSCP markings, trust mode, QoS map, physical port and classification counters. This is the configuration or remediation half of the requested TWO-step pair.

Incorrect Answers

A:

Determine whether a switch is managed by FortiGate or standalone before setting interfaces, routes or admin policies. This step concerns FortiSwitch standalone versus FortiLink managed L3 ownership and is not part of the required paired solution. The correct action and evidence are: Define appropriate trusted ingress marking sources and classify untrusted frames before choosing egress queues. Together with: Inspect incoming 802.1p and DSCP markings, trust mode, QoS map, physical port and classification counters.

B:

An unexpected additional device is restricted or signaled without knocking out approved business equipment. This step concerns Port MAC learning-limit and violation controls and is not part of the required paired solution. The correct action and evidence are: Define appropriate trusted ingress marking sources and classify untrusted frames before choosing egress queues. Together with: Inspect incoming 802.1p and DSCP markings, trust mode, QoS map, physical port and classification counters.

E:

Check FortiLink parent, VLAN ID, VDOM membership, port assignment, subnet and firewall-policy path. This step concerns FortiGate managed FortiSwitch VLAN interface placement and is not part of the required paired solution. The correct action and evidence are: Define appropriate trusted ingress marking sources and classify untrusted frames before choosing egress queues. Together with: Inspect incoming 802.1p and DSCP markings, trust mode, QoS map, physical port and classification counters.

Question 518

An engineer blames firmware for a restart without inspecting system-event history or power loss indications. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Inspect controller switch list, interface events, authentication logs, current configuration, timestamps and recent change history.
  2. Inspect local and neighbor port IDs, timestamp, learned MAC per VLAN, trunk member and expected cabling map.
  3. Inspect Discover/Offer/Request/Ack sequence, ARP requests/replies, VLAN tags, DHCP snooping and DAI counters.
  4. Review RADIUS Access-Accept attributes, CoA path, session identifier, switch port role, DACL installation and packet test.

Explanation

Correct Answer

A:

Inspect controller switch list, interface events, authentication logs, current configuration, timestamps and recent change history. A log message without source device, time and relevant state is not adequate to prove root cause. The paired action is: Collect relevant FortiSwitch controller diagnostics, switch system events and targeted status output before making configuration changes.

Incorrect Answers

B:

Inspect local and neighbor port IDs, timestamp, learned MAC per VLAN, trunk member and expected cabling map. These observations are applicable to LLDP and MAC forwarding table extraction, but would not isolate the main failure first. The decisive evidence is: Inspect controller switch list, interface events, authentication logs, current configuration, timestamps and recent change history.

C:

Inspect Discover/Offer/Request/Ack sequence, ARP requests/replies, VLAN tags, DHCP snooping and DAI counters. These observations are applicable to Capture-based DHCP and ARP path isolation, but would not isolate the main failure first. The decisive evidence is: Inspect controller switch list, interface events, authentication logs, current configuration, timestamps and recent change history.

D:

Review RADIUS Access-Accept attributes, CoA path, session identifier, switch port role, DACL installation and packet test. These observations are applicable to RADIUS change of authorization and applied session policy, but would not isolate the main failure first. The decisive evidence is: Inspect controller switch list, interface events, authentication logs, current configuration, timestamps and recent change history.

Question 519

A redundant aggregation port changes from discarding to forwarding before the expected blocked port transitions safely. Which FortiSwitch configuration or corrective action BEST addresses the requirement?

  1. Apply appropriate STP root or loop protection to preserve topology while analyzing missing BPDUs and unexpected root claims.
  2. Configure supported IEEE 802.1X port security against an approved RADIUS service with explicit guest/unauthorized behavior.
  3. Use STP state and MAC move evidence to isolate one bad bridging path and change only the proven element.
  4. Choose supported Fortinet transceivers and link media based on switch capability, optical reach and wavelength.

Explanation

Correct Answer

C:

Use STP state and MAC move evidence to isolate one bad bridging path and change only the proven element. Packet loss during a bridging loop can coexist with clean optical counters, so L1-only diagnostics miss the root cause. Verify the action with: Review spanning-tree topology-change count, MAC instability, BPDU logs, port errors and recent cabling changes.

Incorrect Answers

A:

Apply appropriate STP root or loop protection to preserve topology while analyzing missing BPDUs and unexpected root claims. This action is relevant to Root guard and loop guard failure response, not the controlling requirement in this case. Root guard and loop guard mitigate different failure cases and should not be enabled indiscriminately on every uplink. The targeted response is: Use STP state and MAC move evidence to isolate one bad bridging path and change only the proven element.

B:

Configure supported IEEE 802.1X port security against an approved RADIUS service with explicit guest/unauthorized behavior. This action is relevant to FortiSwitch 802.1X port-based authentication, not the controlling requirement in this case. A physical link can be up while 802.1X blocks traffic; the switch is the authenticator, not the authentication server. The targeted response is: Use STP state and MAC move evidence to isolate one bad bridging path and change only the proven element.

D:

Choose supported Fortinet transceivers and link media based on switch capability, optical reach and wavelength. This action is relevant to Optic compatibility and laser diagnostic evidence, not the controlling requirement in this case. Matching a mechanical optic cage is insufficient to prove optical or firmware compatibility. The targeted response is: Use STP state and MAC move evidence to isolate one bad bridging path and change only the proven element.

Question 520

A switch trunk is green but the second member carries no packets due to mismatched VLAN membership. Which FortiSwitch configuration or corrective action BEST addresses the requirement?

  1. Verify model-specific PoE class, total switch power budget and per-port policy before enabling new powered devices.
  2. Use a supported FortiGate one-arm sniffer or mirrored ingress path to inspect switch traffic where permitted.
  3. Check that selected switch series and transceiver support split port or PHY breakout, and plan the related interface remapping.
  4. Repair LACP member settings and physical port errors independently before increasing aggregate traffic.

Explanation

Correct Answer

D:

Repair LACP member settings and physical port errors independently before increasing aggregate traffic. One healthy physical link is not proof an aggregate has balanced traffic or that the peer LACP policy matches. Verify the action with: Check per-member speed, partner identity, state, optical counters, VLAN tags and aggregate distribution.

Incorrect Answers

A:

Verify model-specific PoE class, total switch power budget and per-port policy before enabling new powered devices. This action is relevant to Power over Ethernet port controls and budgets, not the controlling requirement in this case. Not every FortiSwitch model or port supports identical PoE allocation or every attached device's peak draw. The targeted response is: Repair LACP member settings and physical port errors independently before increasing aggregate traffic.

B:

Use a supported FortiGate one-arm sniffer or mirrored ingress path to inspect switch traffic where permitted. This action is relevant to FortiGate one-arm sniffer across managed switching, not the controlling requirement in this case. Sniffer placement determines visibility; absence of a packet at one observation point does not prove no packet existed elsewhere. The targeted response is: Repair LACP member settings and physical port errors independently before increasing aggregate traffic.

C:

Check that selected switch series and transceiver support split port or PHY breakout, and plan the related interface remapping. This action is relevant to FortiSwitch split port breakout mode, not the controlling requirement in this case. A physical QSFP cage does not guarantee that four independent Ethernet child ports can be enabled on every model. The targeted response is: Repair LACP member settings and physical port errors independently before increasing aggregate traffic.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests