cert
cert-1
cert-2

Pass Fortinet NSE5_FSW_AD-7.6 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers to Pass the Actual Exam!
30 Days Free Updates, Instant Download!

cert-5
cert-6
NSE5_FSW_AD-7.6 Exam - Verified By Experts
NSE5_FSW_AD-7.6 Premium File

NSE5_FSW_AD-7.6 Premium File

$69.99
$76.99
  • Premium File 64 Questions & Answers. Last Update: Nov 15, 2026

Whats Included:

  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
 
$76.99
$69.99
accept 42 downloads in the last 7 days
block-screenshots
Fortinet NSE5_FSW_AD-7.6 Practice Test 53

Question 520

A switch trunk is green but the second member carries no packets due to mismatched VLAN membership. Which FortiSwitch configuration or corrective action BEST addresses the requirement?

  1. Verify model-specific PoE class, total switch power budget and per-port policy before enabling new powered devices.
  2. Use a supported FortiGate one-arm sniffer or mirrored ingress path to inspect switch traffic where permitted.
  3. Check that selected switch series and transceiver support split port or PHY breakout, and plan the related interface remapping.
  4. Repair LACP member settings and physical port errors independently before increasing aggregate traffic.

Explanation

Correct Answer

D:

Repair LACP member settings and physical port errors independently before increasing aggregate traffic. One healthy physical link is not proof an aggregate has balanced traffic or that the peer LACP policy matches. Verify the action with: Check per-member speed, partner identity, state, optical counters, VLAN tags and aggregate distribution.

Incorrect Answers

A:

Verify model-specific PoE class, total switch power budget and per-port policy before enabling new powered devices. This action is relevant to Power over Ethernet port controls and budgets, not the controlling requirement in this case. Not every FortiSwitch model or port supports identical PoE allocation or every attached device's peak draw. The targeted response is: Repair LACP member settings and physical port errors independently before increasing aggregate traffic.

B:

Use a supported FortiGate one-arm sniffer or mirrored ingress path to inspect switch traffic where permitted. This action is relevant to FortiGate one-arm sniffer across managed switching, not the controlling requirement in this case. Sniffer placement determines visibility; absence of a packet at one observation point does not prove no packet existed elsewhere. The targeted response is: Repair LACP member settings and physical port errors independently before increasing aggregate traffic.

C:

Check that selected switch series and transceiver support split port or PHY breakout, and plan the related interface remapping. This action is relevant to FortiSwitch split port breakout mode, not the controlling requirement in this case. A physical QSFP cage does not guarantee that four independent Ethernet child ports can be enabled on every model. The targeted response is: Repair LACP member settings and physical port errors independently before increasing aggregate traffic.

Question 521

An administrator sets a static route to a next hop located behind an interface that is administratively down. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Inspect FortiGate FortiLink status, supported discovery port, LLDP frames, interface IP, link errors and switch serial.
  2. Check group membership table, querier identity, IGMP report traffic, VLAN and target egress port.
  3. Check route table, next-hop ARP, ingress VLAN, egress interface, prefix length and return-route path.
  4. Inspect SVI admin state, VLAN membership, address and mask, connected route, ARP and intended upstream gateway.

Explanation

Correct Answer

C:

Check route table, next-hop ARP, ingress VLAN, egress interface, prefix length and return-route path. A default route cannot repair local VLAN tagging or a missing neighbor resolution condition. The paired action is: Set a supported default route or precise static prefix toward a reachable next hop and validate return traffic.

Incorrect Answers

A:

Inspect FortiGate FortiLink status, supported discovery port, LLDP frames, interface IP, link errors and switch serial. These observations are applicable to FortiLink discovery failure and physical uplink path, but would not isolate the main failure first. The decisive evidence is: Check route table, next-hop ARP, ingress VLAN, egress interface, prefix length and return-route path.

B:

Check group membership table, querier identity, IGMP report traffic, VLAN and target egress port. These observations are applicable to IGMP snooping and multicast receivers, but would not isolate the main failure first. The decisive evidence is: Check route table, next-hop ARP, ingress VLAN, egress interface, prefix length and return-route path.

D:

Inspect SVI admin state, VLAN membership, address and mask, connected route, ARP and intended upstream gateway. These observations are applicable to FortiSwitch SVI routing and connected routes, but would not isolate the main failure first. The decisive evidence is: Check route table, next-hop ARP, ingress VLAN, egress interface, prefix length and return-route path.

Question 522

A manager wants all discovered switches automatically authorized even though the site uses untrusted wiring closets. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. Check captured port, protocol/MAC/IP filter, platform buffer capacity, capture timestamps and exported packet headers.
  2. Use narrow capture windows, least-privilege access and approved storage/retention when collecting packet data for diagnostics.
  3. A redundant topology recovers after a link failure without simultaneous independent forwarding paths causing loops.
  4. Distinguish FortiSwitch discovery from authorization, and restore the correct controller ownership without automatically trusting unknown devices.
  5. Inspect switch serial, discovered state, pending approval, controller permissions, post-authorize reboot and managed mode.

Explanation

Correct Answers

D:

Distinguish FortiSwitch discovery from authorization, and restore the correct controller ownership without automatically trusting unknown devices. Authorizing a switch is an administrative trust step; pending switch state is not evidence of a routing failure. Verify the action with: Inspect switch serial, discovered state, pending approval, controller permissions, post-authorize reboot and managed mode. This is the configuration or remediation half of the requested TWO-step pair.

E:

Inspect switch serial, discovered state, pending approval, controller permissions, post-authorize reboot and managed mode. Authorizing a switch is an administrative trust step; pending switch state is not evidence of a routing failure. The paired action is: Distinguish FortiSwitch discovery from authorization, and restore the correct controller ownership without automatically trusting unknown devices. This is the diagnostic or verification half of the requested TWO-step pair.

Incorrect Answers

A:

Check captured port, protocol/MAC/IP filter, platform buffer capacity, capture timestamps and exported packet headers. This step concerns FortiSwitch local packet-capture profile and filters and is not part of the required paired solution. The correct action and evidence are: Distinguish FortiSwitch discovery from authorization, and restore the correct controller ownership without automatically trusting unknown devices. Together with: Inspect switch serial, discovered state, pending approval, controller permissions, post-authorize reboot and managed mode.

B:

Use narrow capture windows, least-privilege access and approved storage/retention when collecting packet data for diagnostics. This step concerns Capture and confidentiality limits in incident response and is not part of the required paired solution. The correct action and evidence are: Distinguish FortiSwitch discovery from authorization, and restore the correct controller ownership without automatically trusting unknown devices. Together with: Inspect switch serial, discovered state, pending approval, controller permissions, post-authorize reboot and managed mode.

C:

A redundant topology recovers after a link failure without simultaneous independent forwarding paths causing loops. This step concerns FortiLink split-interface and standby path design and is not part of the required paired solution. The correct action and evidence are: Distinguish FortiSwitch discovery from authorization, and restore the correct controller ownership without automatically trusting unknown devices. Together with: Inspect switch serial, discovered state, pending approval, controller permissions, post-authorize reboot and managed mode.

Question 523

A switch trunk is green but the second member carries no packets due to mismatched VLAN membership. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. Only intended networks are reachable through the configured route and the return path remains valid.
  2. The expected known switch becomes authorized and synchronizes without accepting an unrelated device.
  3. Expected members join the trunk and survive a member disconnect without loops or silent black holes.
  4. A planned alternate link remains blocked and takes over predictably without a broadcast storm.

Explanation

Correct Answer

C:

Expected members join the trunk and survive a member disconnect without loops or silent black holes. One healthy physical link is not proof an aggregate has balanced traffic or that the peer LACP policy matches.

Incorrect Answers

A:

Only intended networks are reachable through the configured route and the return path remains valid. This result relates to Static route and default gateway validation, not the acceptance condition under test. The relevant result is: Expected members join the trunk and survive a member disconnect without loops or silent black holes.

B:

The expected known switch becomes authorized and synchronizes without accepting an unrelated device. This result relates to Controller authorization and pending-switch state, not the acceptance condition under test. The relevant result is: Expected members join the trunk and survive a member disconnect without loops or silent black holes.

D:

A planned alternate link remains blocked and takes over predictably without a broadcast storm. This result relates to MSTP region consistency and designated root, not the acceptance condition under test. The relevant result is: Expected members join the trunk and survive a member disconnect without loops or silent black holes.

Question 524

A technician isolates management over FortiLink but mistakenly blocks the same link's approved client VLAN traffic. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. Management control and authorized user traffic work over the direct connection without confusing them.
  2. Two tenants can use the supported shared port without accidental cross-tenant broadcasts or privilege escalation.
  3. Rapid MAC moves stop and normal forwarding returns with a verified alternate redundant path.
  4. A controlled peer or member failure maintains approved client VLAN access without a Layer-2 loop.

Explanation

Correct Answer

A:

Management control and authorized user traffic work over the direct connection without confusing them. FortiLink carries management and data traffic; a valid management handshake does not prove every user VLAN is forwarded.

Incorrect Answers

B:

Two tenants can use the supported shared port without accidental cross-tenant broadcasts or privilege escalation. This result relates to Shared port multi-VDOM policy boundaries, not the acceptance condition under test. The relevant result is: Management control and authorized user traffic work over the direct connection without confusing them.

C:

Rapid MAC moves stop and normal forwarding returns with a verified alternate redundant path. This result relates to STP incident recovery with MAC flap evidence, not the acceptance condition under test. The relevant result is: Management control and authorized user traffic work over the direct connection without confusing them.

D:

A controlled peer or member failure maintains approved client VLAN access without a Layer-2 loop. This result relates to MCLAG multichassis access redundancy, not the acceptance condition under test. The relevant result is: Management control and authorized user traffic work over the direct connection without confusing them.

Question 525

A conference room allows one phone and one PC but an overstrict MAC learning limit blocks the PC. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. Apply a specific restricted VLAN or quarantine mechanism with explicit authorized remediation and monitoring expectations.
  2. Inspect MAC table usage, configured learning limit, learned device count, port-security event and violation action.
  3. Phones and access points receive stable allocated power while redundant PSU and priority policies remain within budget.
  4. Set model-supported dynamic MAC address learning limits and specific violation action on access-facing switch ports.
  5. Examine port binding list, packet source IP, ingress VLAN, IP-source guard counters and expected host subnet.

Explanation

Correct Answers

B:

Inspect MAC table usage, configured learning limit, learned device count, port-security event and violation action. Dynamic MAC learning limits reduce accidental fan-out but should be tuned for legitimate multi-device access designs. The paired action is: Set model-supported dynamic MAC address learning limits and specific violation action on access-facing switch ports. This is the diagnostic or verification half of the requested TWO-step pair.

D:

Set model-supported dynamic MAC address learning limits and specific violation action on access-facing switch ports. Dynamic MAC learning limits reduce accidental fan-out but should be tuned for legitimate multi-device access designs. Verify the action with: Inspect MAC table usage, configured learning limit, learned device count, port-security event and violation action. This is the configuration or remediation half of the requested TWO-step pair.

Incorrect Answers

A:

Apply a specific restricted VLAN or quarantine mechanism with explicit authorized remediation and monitoring expectations. This step concerns VLAN security policy and quarantine actions and is not part of the required paired solution. The correct action and evidence are: Set model-supported dynamic MAC address learning limits and specific violation action on access-facing switch ports. Together with: Inspect MAC table usage, configured learning limit, learned device count, port-security event and violation action.

C:

Phones and access points receive stable allocated power while redundant PSU and priority policies remain within budget. This step concerns PoE and LLDP-MED endpoint power coordination and is not part of the required paired solution. The correct action and evidence are: Set model-supported dynamic MAC address learning limits and specific violation action on access-facing switch ports. Together with: Inspect MAC table usage, configured learning limit, learned device count, port-security event and violation action.

E:

Examine port binding list, packet source IP, ingress VLAN, IP-source guard counters and expected host subnet. This step concerns IPv4 source guard and binding-based packet filtering and is not part of the required paired solution. The correct action and evidence are: Set model-supported dynamic MAC address learning limits and specific violation action on access-facing switch ports. Together with: Inspect MAC table usage, configured learning limit, learned device count, port-security event and violation action.

Question 526

A switch learns one user's MAC on VLAN 60 although that access group was provisioned for VLAN 50. Which FortiSwitch configuration or corrective action BEST addresses the requirement?

  1. Configure supported IGMP snooping and querier expectations to forward multicast only where receivers request it.
  2. Trace MAC-learning and forwarding across the precise VLAN and repair only missing approved membership.
  3. Set a supported default route or precise static prefix toward a reachable next hop and validate return traffic.
  4. Investigate managed switch offline or configuration mismatch after firmware upgrade or controller resynchronization using both endpoints.

Explanation

Correct Answer

B:

Trace MAC-learning and forwarding across the precise VLAN and repair only missing approved membership. Link up and successful traffic in one VLAN do not prove every VLAN is correctly provisioned on the path. Verify the action with: Check client MAC learning, VLAN database, switch uplink tags, gateway ARP and port assignment on every hop.

Incorrect Answers

A:

Configure supported IGMP snooping and querier expectations to forward multicast only where receivers request it. This action is relevant to IGMP snooping and multicast receivers, not the controlling requirement in this case. A multicast VLAN alone does not indicate that IGMP receiver membership or querier operation is healthy. The targeted response is: Trace MAC-learning and forwarding across the precise VLAN and repair only missing approved membership.

C:

Set a supported default route or precise static prefix toward a reachable next hop and validate return traffic. This action is relevant to Static route and default gateway validation, not the controlling requirement in this case. A default route cannot repair local VLAN tagging or a missing neighbor resolution condition. The targeted response is: Trace MAC-learning and forwarding across the precise VLAN and repair only missing approved membership.

D:

Investigate managed switch offline or configuration mismatch after firmware upgrade or controller resynchronization using both endpoints. This action is relevant to FortiLink synchronization and upgrade troubleshooting, not the controlling requirement in this case. Managed switches can be reachable at Layer 2 yet show stale policy after incompatible upgrade or failed controller push. The targeted response is: Trace MAC-learning and forwarding across the precise VLAN and repair only missing approved membership.

Question 527

The network plan assumes every port-security feature is supported for a multi-VDOM shared port on every model. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. The correct link establishes at expected negotiated rate without recurring loss-of-signal or CRC errors.
  2. A tenant reaches only its approved VDOM resources and does not inherit another tenant's policies.
  3. Exactly the intended serial joins managed inventory and receives approved controller settings after authorization.
  4. Two tenants can use the supported shared port without accidental cross-tenant broadcasts or privilege escalation.

Explanation

Correct Answer

D:

Two tenants can use the supported shared port without accidental cross-tenant broadcasts or privilege escalation. Shared physical ports can support some per-port controls across VDOMs, but feature support and tagging must be checked for the exact release.

Incorrect Answers

A:

The correct link establishes at expected negotiated rate without recurring loss-of-signal or CRC errors. This result relates to Optic compatibility and laser diagnostic evidence, not the acceptance condition under test. The relevant result is: Two tenants can use the supported shared port without accidental cross-tenant broadcasts or privilege escalation.

B:

A tenant reaches only its approved VDOM resources and does not inherit another tenant's policies. This result relates to FortiGate VDOM-based FortiSwitch tenant assignment, not the acceptance condition under test. The relevant result is: Two tenants can use the supported shared port without accidental cross-tenant broadcasts or privilege escalation.

C:

Exactly the intended serial joins managed inventory and receives approved controller settings after authorization. This result relates to Discovered versus authorized FortiSwitch state, not the acceptance condition under test. The relevant result is: Two tenants can use the supported shared port without accidental cross-tenant broadcasts or privilege escalation.

Question 528

A downstream switch advertises a superior bridge ID and tries to become campus root unexpectedly. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. Accidental downstream switches are contained without disabling legitimate uplinks that should exchange BPDUs.
  2. A rogue root candidate is blocked or a looped path remains safely contained without wiping all STP configuration.
  3. The correct link establishes at expected negotiated rate without recurring loss-of-signal or CRC errors.
  4. A failed managed switch can be replaced with supported firmware and restored authorized port/VLAN behavior.

Explanation

Correct Answer

B:

A rogue root candidate is blocked or a looped path remains safely contained without wiping all STP configuration. Root guard and loop guard mitigate different failure cases and should not be enabled indiscriminately on every uplink.

Incorrect Answers

A:

Accidental downstream switches are contained without disabling legitimate uplinks that should exchange BPDUs. This result relates to BPDU guard on endpoint-facing ports, not the acceptance condition under test. The relevant result is: A rogue root candidate is blocked or a looped path remains safely contained without wiping all STP configuration.

C:

The correct link establishes at expected negotiated rate without recurring loss-of-signal or CRC errors. This result relates to Optic compatibility and laser diagnostic evidence, not the acceptance condition under test. The relevant result is: A rogue root candidate is blocked or a looped path remains safely contained without wiping all STP configuration.

D:

A failed managed switch can be replaced with supported firmware and restored authorized port/VLAN behavior. This result relates to Config backup and firmware inventory evidence, not the acceptance condition under test. The relevant result is: A rogue root candidate is blocked or a looped path remains safely contained without wiping all STP configuration.

Question 529

A redundant aggregation port changes from discarding to forwarding before the expected blocked port transitions safely. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. Use STP state and MAC move evidence to isolate one bad bridging path and change only the proven element.
  2. Review spanning-tree topology-change count, MAC instability, BPDU logs, port errors and recent cabling changes.
  3. Check per-member speed, partner identity, state, optical counters, VLAN tags and aggregate distribution.
  4. Use compatible spanning-tree mode across connected switches and verify per-VLAN root and blocked links.
  5. The failing physical or logical port is identified through reproducible counters rather than visual LED assumptions.

Explanation

Correct Answers

A:

Use STP state and MAC move evidence to isolate one bad bridging path and change only the proven element. Packet loss during a bridging loop can coexist with clean optical counters, so L1-only diagnostics miss the root cause. Verify the action with: Review spanning-tree topology-change count, MAC instability, BPDU logs, port errors and recent cabling changes. This is the configuration or remediation half of the requested TWO-step pair.

B:

Review spanning-tree topology-change count, MAC instability, BPDU logs, port errors and recent cabling changes. Packet loss during a bridging loop can coexist with clean optical counters, so L1-only diagnostics miss the root cause. The paired action is: Use STP state and MAC move evidence to isolate one bad bridging path and change only the proven element. This is the diagnostic or verification half of the requested TWO-step pair.

Incorrect Answers

C:

Check per-member speed, partner identity, state, optical counters, VLAN tags and aggregate distribution. This step concerns Link aggregation and port error recovery and is not part of the required paired solution. The correct action and evidence are: Use STP state and MAC move evidence to isolate one bad bridging path and change only the proven element. Together with: Review spanning-tree topology-change count, MAC instability, BPDU logs, port errors and recent cabling changes.

D:

Use compatible spanning-tree mode across connected switches and verify per-VLAN root and blocked links. This step concerns RPVST and supported STP mode interoperability and is not part of the required paired solution. The correct action and evidence are: Use STP state and MAC move evidence to isolate one bad bridging path and change only the proven element. Together with: Review spanning-tree topology-change count, MAC instability, BPDU logs, port errors and recent cabling changes.

E:

The failing physical or logical port is identified through reproducible counters rather than visual LED assumptions. This step concerns Managed switch port statistics and counter analysis and is not part of the required paired solution. The correct action and evidence are: Use STP state and MAC move evidence to isolate one bad bridging path and change only the proven element. Together with: Review spanning-tree topology-change count, MAC instability, BPDU logs, port errors and recent cabling changes.

Question 530

A firewall-to-switch connection repeatedly flaps because each side assumes different negotiated speed. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. Inspect hardware SKU, firmware and phy-mode support, breakout cable specification, child port IDs and port restart effect.
  2. Verify model-specific PoE class, total switch power budget and per-port policy before enabling new powered devices.
  3. Check both peer capabilities, auto-negotiation, administrative speed, cable quality and CRC/FCS counters.
  4. Legitimate clients lease addresses while rogue DHCP servers connected to untrusted access ports cannot answer.
  5. Set only mutually supported Ethernet port rates and verify operational negotiation instead of forcing mismatched speeds.

Explanation

Correct Answers

C:

Check both peer capabilities, auto-negotiation, administrative speed, cable quality and CRC/FCS counters. Incorrect forced port speed or duplex can mimic application loss even when the VLAN configuration is valid. The paired action is: Set only mutually supported Ethernet port rates and verify operational negotiation instead of forcing mismatched speeds. This is the diagnostic or verification half of the requested TWO-step pair.

E:

Set only mutually supported Ethernet port rates and verify operational negotiation instead of forcing mismatched speeds. Incorrect forced port speed or duplex can mimic application loss even when the VLAN configuration is valid. Verify the action with: Check both peer capabilities, auto-negotiation, administrative speed, cable quality and CRC/FCS counters. This is the configuration or remediation half of the requested TWO-step pair.

Incorrect Answers

A:

Inspect hardware SKU, firmware and phy-mode support, breakout cable specification, child port IDs and port restart effect. This step concerns FortiSwitch split port breakout mode and is not part of the required paired solution. The correct action and evidence are: Set only mutually supported Ethernet port rates and verify operational negotiation instead of forcing mismatched speeds. Together with: Check both peer capabilities, auto-negotiation, administrative speed, cable quality and CRC/FCS counters.

B:

Verify model-specific PoE class, total switch power budget and per-port policy before enabling new powered devices. This step concerns Power over Ethernet port controls and budgets and is not part of the required paired solution. The correct action and evidence are: Set only mutually supported Ethernet port rates and verify operational negotiation instead of forcing mismatched speeds. Together with: Check both peer capabilities, auto-negotiation, administrative speed, cable quality and CRC/FCS counters.

D:

Legitimate clients lease addresses while rogue DHCP servers connected to untrusted access ports cannot answer. This step concerns DHCP snooping trust-boundary enforcement and is not part of the required paired solution. The correct action and evidence are: Set only mutually supported Ethernet port rates and verify operational negotiation instead of forcing mismatched speeds. Together with: Check both peer capabilities, auto-negotiation, administrative speed, cable quality and CRC/FCS counters.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests