cert
cert-1
cert-2

Pass Fortinet NSE5_FSW_AD-7.6 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers to Pass the Actual Exam!
30 Days Free Updates, Instant Download!

cert-5
cert-6
NSE5_FSW_AD-7.6 Exam - Verified By Experts
NSE5_FSW_AD-7.6 Premium File

NSE5_FSW_AD-7.6 Premium File

$69.99
$76.99
  • Premium File 64 Questions & Answers. Last Update: Nov 15, 2026

Whats Included:

  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
 
$76.99
$69.99
accept 42 downloads in the last 7 days
block-screenshots
Fortinet NSE5_FSW_AD-7.6 Practice Test 38

Question 370

A handset supports LLDP-MED but the access switch is configured only to receive LLDP and not advertise local policy. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Examine LLDP transmit state, port profile, neighbor TLVs, advertised VLAN and DSCP or 802.1p settings.
  2. Inspect Discover/Offer/Request/Ack sequence, ARP requests/replies, VLAN tags, DHCP snooping and DAI counters.
  3. Check both peer capabilities, auto-negotiation, administrative speed, cable quality and CRC/FCS counters.
  4. Inspect local and remote chassis and port IDs, TLV freshness, management address, interval and LLDP-MED location settings.

Explanation

Correct Answer

A:

Examine LLDP transmit state, port profile, neighbor TLVs, advertised VLAN and DSCP or 802.1p settings. LLDP-MED exchanges policy hints with compatible endpoints; it does not substitute for port membership and DHCP. The paired action is: Configure supported LLDP-MED voice policy so a compatible handset learns its VLAN and traffic priority.

Incorrect Answers

B:

Inspect Discover/Offer/Request/Ack sequence, ARP requests/replies, VLAN tags, DHCP snooping and DAI counters. These observations are applicable to Capture-based DHCP and ARP path isolation, but would not isolate the main failure first. The decisive evidence is: Examine LLDP transmit state, port profile, neighbor TLVs, advertised VLAN and DSCP or 802.1p settings.

C:

Check both peer capabilities, auto-negotiation, administrative speed, cable quality and CRC/FCS counters. These observations are applicable to Switch port speed and duplex commissioning, but would not isolate the main failure first. The decisive evidence is: Examine LLDP transmit state, port profile, neighbor TLVs, advertised VLAN and DSCP or 802.1p settings.

D:

Inspect local and remote chassis and port IDs, TLV freshness, management address, interval and LLDP-MED location settings. These observations are applicable to LLDP neighbor discovery and location information, but would not isolate the main failure first. The decisive evidence is: Examine LLDP transmit state, port profile, neighbor TLVs, advertised VLAN and DSCP or 802.1p settings.

Question 371

An engineer removes an obsolete customer VLAN from a shared trunk without checking another tenant still uses it. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. Inspect shared-port VLAN diff, tenant inventory, VDOM policy, change approval and representative positive/negative access tests.
  2. Choose supported FortiSwitchOS version and maintenance workflow compatible with the FortiGate version and topology.
  3. Check interface type, FortiLink enablement, discovery setting, IP assignment, switch model support, and management VLAN reachability.
  4. Document tenant-specific impact, current switch state and reversal steps before changing shared FortiLink VLAN/port mappings.
  5. Known printers and IoT devices enter their restricted VLANs while unknown endpoints have no excessive access.

Explanation

Correct Answers

A:

Inspect shared-port VLAN diff, tenant inventory, VDOM policy, change approval and representative positive/negative access tests. A change on shared physical transport can affect multiple VDOMs, even if each tenant's firewall policy is separate. The paired action is: Document tenant-specific impact, current switch state and reversal steps before changing shared FortiLink VLAN/port mappings. This is the diagnostic or verification half of the requested TWO-step pair.

D:

Document tenant-specific impact, current switch state and reversal steps before changing shared FortiLink VLAN/port mappings. A change on shared physical transport can affect multiple VDOMs, even if each tenant's firewall policy is separate. Verify the action with: Inspect shared-port VLAN diff, tenant inventory, VDOM policy, change approval and representative positive/negative access tests. This is the configuration or remediation half of the requested TWO-step pair.

Incorrect Answers

B:

Choose supported FortiSwitchOS version and maintenance workflow compatible with the FortiGate version and topology. This step concerns Firmware and lifecycle preparation for FortiSwitch and is not part of the required paired solution. The correct action and evidence are: Document tenant-specific impact, current switch state and reversal steps before changing shared FortiLink VLAN/port mappings. Together with: Inspect shared-port VLAN diff, tenant inventory, VDOM policy, change approval and representative positive/negative access tests.

C:

Check interface type, FortiLink enablement, discovery setting, IP assignment, switch model support, and management VLAN reachability. This step concerns FortiLink management interface provisioning and is not part of the required paired solution. The correct action and evidence are: Document tenant-specific impact, current switch state and reversal steps before changing shared FortiLink VLAN/port mappings. Together with: Inspect shared-port VLAN diff, tenant inventory, VDOM policy, change approval and representative positive/negative access tests.

E:

Known printers and IoT devices enter their restricted VLANs while unknown endpoints have no excessive access. This step concerns NAC dynamic port policy device classification and is not part of the required paired solution. The correct action and evidence are: Document tenant-specific impact, current switch state and reversal steps before changing shared FortiLink VLAN/port mappings. Together with: Inspect shared-port VLAN diff, tenant inventory, VDOM policy, change approval and representative positive/negative access tests.

Question 372

A desk phone and PC are daisy-chained, yet both obtain addresses from the guest subnet. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. Use supported native and voice VLAN policies so phones and downstream workstations receive appropriate separate traffic treatment.
  2. Trace MAC-learning and forwarding across the precise VLAN and repair only missing approved membership.
  3. Review phone tagging capabilities, voice VLAN identifier, LLDP-MED policy, access port configuration and DHCP scopes.
  4. Review queue maps, output drops, interface rate, strict versus weighted servicing and application latency.
  5. Unauthorized source IP packets fail while an approved host continues using its assigned IP and address policy.

Explanation

Correct Answers

A:

Use supported native and voice VLAN policies so phones and downstream workstations receive appropriate separate traffic treatment. Voice tagging is not secured merely because its VLAN ID differs from the workstation's native VLAN. Verify the action with: Review phone tagging capabilities, voice VLAN identifier, LLDP-MED policy, access port configuration and DHCP scopes. This is the configuration or remediation half of the requested TWO-step pair.

C:

Review phone tagging capabilities, voice VLAN identifier, LLDP-MED policy, access port configuration and DHCP scopes. Voice tagging is not secured merely because its VLAN ID differs from the workstation's native VLAN. The paired action is: Use supported native and voice VLAN policies so phones and downstream workstations receive appropriate separate traffic treatment. This is the diagnostic or verification half of the requested TWO-step pair.

Incorrect Answers

B:

Trace MAC-learning and forwarding across the precise VLAN and repair only missing approved membership. This step concerns VLAN access isolation and troubleshooting of membership and is not part of the required paired solution. The correct action and evidence are: Use supported native and voice VLAN policies so phones and downstream workstations receive appropriate separate traffic treatment. Together with: Review phone tagging capabilities, voice VLAN identifier, LLDP-MED policy, access port configuration and DHCP scopes.

D:

Review queue maps, output drops, interface rate, strict versus weighted servicing and application latency. This step concerns Egress priority scheduling and congestion visibility and is not part of the required paired solution. The correct action and evidence are: Use supported native and voice VLAN policies so phones and downstream workstations receive appropriate separate traffic treatment. Together with: Review phone tagging capabilities, voice VLAN identifier, LLDP-MED policy, access port configuration and DHCP scopes.

E:

Unauthorized source IP packets fail while an approved host continues using its assigned IP and address policy. This step concerns IPv4 source guard and binding-based packet filtering and is not part of the required paired solution. The correct action and evidence are: Use supported native and voice VLAN policies so phones and downstream workstations receive appropriate separate traffic treatment. Together with: Review phone tagging capabilities, voice VLAN identifier, LLDP-MED policy, access port configuration and DHCP scopes.

Question 373

Voice packets show the correct DSCP but the uplink queues them as ordinary best-effort traffic. Which FortiSwitch configuration or corrective action BEST addresses the requirement?

  1. Define appropriate trusted ingress marking sources and classify untrusted frames before choosing egress queues.
  2. Mirror only the relevant source ports or VLAN traffic to a dedicated analyzer destination using supported SPAN settings.
  3. Apply supported egress CoS queue policy to reduce latency under congestion without starving other required traffic.
  4. Validate LLDP advertisements, hold timers, peer identity and optional location data before trusting topology or emergency-service records.

Explanation

Correct Answer

A:

Define appropriate trusted ingress marking sources and classify untrusted frames before choosing egress queues. A packet marking has no useful QoS effect until supported classification and scheduling map it consistently. Verify the action with: Inspect incoming 802.1p and DSCP markings, trust mode, QoS map, physical port and classification counters.

Incorrect Answers

B:

Mirror only the relevant source ports or VLAN traffic to a dedicated analyzer destination using supported SPAN settings. This action is relevant to FortiSwitch port mirroring to network analyzer, not the controlling requirement in this case. A mirrored stream is passive evidence and can be incomplete if analyzer bandwidth is lower than the observed traffic. The targeted response is: Define appropriate trusted ingress marking sources and classify untrusted frames before choosing egress queues.

C:

Apply supported egress CoS queue policy to reduce latency under congestion without starving other required traffic. This action is relevant to Egress priority scheduling and congestion visibility, not the controlling requirement in this case. QoS prioritizes scarce link capacity but cannot create bandwidth beyond the physical egress rate. The targeted response is: Define appropriate trusted ingress marking sources and classify untrusted frames before choosing egress queues.

D:

Validate LLDP advertisements, hold timers, peer identity and optional location data before trusting topology or emergency-service records. This action is relevant to LLDP neighbor discovery and location information, not the controlling requirement in this case. LLDP is an L2 discovery protocol and cannot prove the whole routed service path or phone emergency-location correctness by itself. The targeted response is: Define appropriate trusted ingress marking sources and classify untrusted frames before choosing egress queues.

Question 374

A static-IP printer loses connectivity after DAI is turned on with no manual binding exception. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Check route table, next-hop ARP, ingress VLAN, egress interface, prefix length and return-route path.
  2. Inspect frame-rate counters by class, threshold configuration, affected VLANs and protocol health under controlled load.
  3. Inspect ARP inspection status, DHCP snooping binding database, source MAC/IP, trusted ports and violation logs.
  4. Inspect DHCP server permitted list, Option 82 insertion/trust state, relay path, client bindings and lease evidence.

Explanation

Correct Answer

C:

Inspect ARP inspection status, DHCP snooping binding database, source MAC/IP, trusted ports and violation logs. DAI validation needs a reliable binding or exception policy; enabling it blindly can interrupt static-IP devices. The paired action is: Use supported dynamic ARP inspection with valid switch bindings to reject spoofed IP-MAC claims at untrusted edges.

Incorrect Answers

A:

Check route table, next-hop ARP, ingress VLAN, egress interface, prefix length and return-route path. These observations are applicable to Static route and default gateway validation, but would not isolate the main failure first. The decisive evidence is: Inspect ARP inspection status, DHCP snooping binding database, source MAC/IP, trusted ports and violation logs.

B:

Inspect frame-rate counters by class, threshold configuration, affected VLANs and protocol health under controlled load. These observations are applicable to Storm-control thresholds and broadcast containment, but would not isolate the main failure first. The decisive evidence is: Inspect ARP inspection status, DHCP snooping binding database, source MAC/IP, trusted ports and violation logs.

D:

Inspect DHCP server permitted list, Option 82 insertion/trust state, relay path, client bindings and lease evidence. These observations are applicable to DHCP server allowlist and Option 82 validation, but would not isolate the main failure first. The decisive evidence is: Inspect ARP inspection status, DHCP snooping binding database, source MAC/IP, trusted ports and violation logs.

Question 375

A security role policy rejects sessions after a RADIUS change but no one examines switch authentication events. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. Inspect controller switch list, interface events, authentication logs, current configuration, timestamps and recent change history.
  2. Known printers and IoT devices enter their restricted VLANs while unknown endpoints have no excessive access.
  3. Distinguish FortiSwitch discovery from authorization, and restore the correct controller ownership without automatically trusting unknown devices.
  4. Collect relevant FortiSwitch controller diagnostics, switch system events and targeted status output before making configuration changes.
  5. Check captured port, protocol/MAC/IP filter, platform buffer capacity, capture timestamps and exported packet headers.

Explanation

Correct Answers

A:

Inspect controller switch list, interface events, authentication logs, current configuration, timestamps and recent change history. A log message without source device, time and relevant state is not adequate to prove root cause. The paired action is: Collect relevant FortiSwitch controller diagnostics, switch system events and targeted status output before making configuration changes. This is the diagnostic or verification half of the requested TWO-step pair.

D:

Collect relevant FortiSwitch controller diagnostics, switch system events and targeted status output before making configuration changes. A log message without source device, time and relevant state is not adequate to prove root cause. Verify the action with: Inspect controller switch list, interface events, authentication logs, current configuration, timestamps and recent change history. This is the configuration or remediation half of the requested TWO-step pair.

Incorrect Answers

B:

Known printers and IoT devices enter their restricted VLANs while unknown endpoints have no excessive access. This step concerns NAC dynamic port policy device classification and is not part of the required paired solution. The correct action and evidence are: Collect relevant FortiSwitch controller diagnostics, switch system events and targeted status output before making configuration changes. Together with: Inspect controller switch list, interface events, authentication logs, current configuration, timestamps and recent change history.

C:

Distinguish FortiSwitch discovery from authorization, and restore the correct controller ownership without automatically trusting unknown devices. This step concerns Controller authorization and pending-switch state and is not part of the required paired solution. The correct action and evidence are: Collect relevant FortiSwitch controller diagnostics, switch system events and targeted status output before making configuration changes. Together with: Inspect controller switch list, interface events, authentication logs, current configuration, timestamps and recent change history.

E:

Check captured port, protocol/MAC/IP filter, platform buffer capacity, capture timestamps and exported packet headers. This step concerns FortiSwitch local packet-capture profile and filters and is not part of the required paired solution. The correct action and evidence are: Collect relevant FortiSwitch controller diagnostics, switch system events and targeted status output before making configuration changes. Together with: Inspect controller switch list, interface events, authentication logs, current configuration, timestamps and recent change history.

Question 376

A wireless bridge carries a FortiLink interswitch segment but does not forward expected discovery multicast frames. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. Phones and access points receive stable allocated power while redundant PSU and priority policies remain within budget.
  2. Inspect supported topology, FortiLink p2p settings, TPID, transport reachability, discovery frames and switch firmware.
  3. Diagnose multi-VDOM client isolation issues by correlating switch VLAN assignment and FortiGate VDOM routing/policy evidence.
  4. Use supported FortiLink point-to-point L2 or Layer-3 transport configuration and validate discovery and control traffic end to end.
  5. Check VDOM assignment, sharing support, allowed VLANs, policy scope, QoS or port-security support and MAC-learning state.

Explanation

Correct Answers

B:

Inspect supported topology, FortiLink p2p settings, TPID, transport reachability, discovery frames and switch firmware. FortiLink over intermediate networks requires topology-specific settings; ordinary IP reachability alone does not establish FortiLink discovery. The paired action is: Use supported FortiLink point-to-point L2 or Layer-3 transport configuration and validate discovery and control traffic end to end. This is the diagnostic or verification half of the requested TWO-step pair.

D:

Use supported FortiLink point-to-point L2 or Layer-3 transport configuration and validate discovery and control traffic end to end. FortiLink over intermediate networks requires topology-specific settings; ordinary IP reachability alone does not establish FortiLink discovery. Verify the action with: Inspect supported topology, FortiLink p2p settings, TPID, transport reachability, discovery frames and switch firmware. This is the configuration or remediation half of the requested TWO-step pair.

Incorrect Answers

A:

Phones and access points receive stable allocated power while redundant PSU and priority policies remain within budget. This step concerns PoE and LLDP-MED endpoint power coordination and is not part of the required paired solution. The correct action and evidence are: Use supported FortiLink point-to-point L2 or Layer-3 transport configuration and validate discovery and control traffic end to end. Together with: Inspect supported topology, FortiLink p2p settings, TPID, transport reachability, discovery frames and switch firmware.

C:

Diagnose multi-VDOM client isolation issues by correlating switch VLAN assignment and FortiGate VDOM routing/policy evidence. This step concerns Managed tenant troubleshooting across controller and access layer and is not part of the required paired solution. The correct action and evidence are: Use supported FortiLink point-to-point L2 or Layer-3 transport configuration and validate discovery and control traffic end to end. Together with: Inspect supported topology, FortiLink p2p settings, TPID, transport reachability, discovery frames and switch firmware.

E:

Check VDOM assignment, sharing support, allowed VLANs, policy scope, QoS or port-security support and MAC-learning state. This step concerns Shared port multi-VDOM policy boundaries and is not part of the required paired solution. The correct action and evidence are: Use supported FortiLink point-to-point L2 or Layer-3 transport configuration and validate discovery and control traffic end to end. Together with: Inspect supported topology, FortiLink p2p settings, TPID, transport reachability, discovery frames and switch firmware.

Question 377

A branch switch appears offline although its uplink remains green because FortiLink management frames are blocked. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Check captured port, protocol/MAC/IP filter, platform buffer capacity, capture timestamps and exported packet headers.
  2. Inspect FortiGate FortiLink status, supported discovery port, LLDP frames, interface IP, link errors and switch serial.
  3. Check VDOM assignment, sharing support, allowed VLANs, policy scope, QoS or port-security support and MAC-learning state.
  4. Inspect mirror direction, source and destination ports, speed constraints, physical capture link and switch statistics.

Explanation

Correct Answer

B:

Inspect FortiGate FortiLink status, supported discovery port, LLDP frames, interface IP, link errors and switch serial. A green Ethernet link is necessary for many paths but does not prove the FortiLink management protocol or discovery is working. The paired action is: Troubleshoot FortiLink discovery from physical and logical interface configuration through LLDP and management addressing.

Incorrect Answers

A:

Check captured port, protocol/MAC/IP filter, platform buffer capacity, capture timestamps and exported packet headers. These observations are applicable to FortiSwitch local packet-capture profile and filters, but would not isolate the main failure first. The decisive evidence is: Inspect FortiGate FortiLink status, supported discovery port, LLDP frames, interface IP, link errors and switch serial.

C:

Check VDOM assignment, sharing support, allowed VLANs, policy scope, QoS or port-security support and MAC-learning state. These observations are applicable to Shared port multi-VDOM policy boundaries, but would not isolate the main failure first. The decisive evidence is: Inspect FortiGate FortiLink status, supported discovery port, LLDP frames, interface IP, link errors and switch serial.

D:

Inspect mirror direction, source and destination ports, speed constraints, physical capture link and switch statistics. These observations are applicable to FortiSwitch port mirroring to network analyzer, but would not isolate the main failure first. The decisive evidence is: Inspect FortiGate FortiLink status, supported discovery port, LLDP frames, interface IP, link errors and switch serial.

Question 378

A camera is categorized as a general workstation and receives an overly broad VLAN assignment. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. Each customer's tagged traffic reaches only its assigned service context without S-VLAN collision.
  2. Only intended traffic is accepted or rejected at the switch while allowed application sessions remain functional.
  3. Unauthorized source IP packets fail while an approved host continues using its assigned IP and address policy.
  4. Known printers and IoT devices enter their restricted VLANs while unknown endpoints have no excessive access.

Explanation

Correct Answer

D:

Known printers and IoT devices enter their restricted VLANs while unknown endpoints have no excessive access. NAC assignment relies on reliable detection and a defined precedence; a class label is not a substitute for switch-port policy.

Incorrect Answers

A:

Each customer's tagged traffic reaches only its assigned service context without S-VLAN collision. This result relates to QinQ outer and inner VLAN tenant mapping, not the acceptance condition under test. The relevant result is: Known printers and IoT devices enter their restricted VLANs while unknown endpoints have no excessive access.

B:

Only intended traffic is accepted or rejected at the switch while allowed application sessions remain functional. This result relates to Static port ACL forwarding decisions, not the acceptance condition under test. The relevant result is: Known printers and IoT devices enter their restricted VLANs while unknown endpoints have no excessive access.

C:

Unauthorized source IP packets fail while an approved host continues using its assigned IP and address policy. This result relates to IPv4 source guard and binding-based packet filtering, not the acceptance condition under test. The relevant result is: Known printers and IoT devices enter their restricted VLANs while unknown endpoints have no excessive access.

Question 379

A desk phone and PC are daisy-chained, yet both obtain addresses from the guest subnet. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. The handset and attached workstation use the intended separate networks and retain their authorized access.
  2. Known unicast traffic reaches the correct access port while unknown traffic is confined to the intended VLAN.
  3. An access host receives the right subnet while only approved tagged VLANs traverse the uplink.
  4. Legitimate clients lease addresses while rogue DHCP servers connected to untrusted access ports cannot answer.

Explanation

Correct Answer

A:

The handset and attached workstation use the intended separate networks and retain their authorized access. Voice tagging is not secured merely because its VLAN ID differs from the workstation's native VLAN.

Incorrect Answers

B:

Known unicast traffic reaches the correct access port while unknown traffic is confined to the intended VLAN. This result relates to Layer 2 MAC-learning and forwarding decisions, not the acceptance condition under test. The relevant result is: The handset and attached workstation use the intended separate networks and retain their authorized access.

C:

An access host receives the right subnet while only approved tagged VLANs traverse the uplink. This result relates to FortiSwitch native VLAN versus allowed VLANs, not the acceptance condition under test. The relevant result is: The handset and attached workstation use the intended separate networks and retain their authorized access.

D:

Legitimate clients lease addresses while rogue DHCP servers connected to untrusted access ports cannot answer. This result relates to DHCP snooping trust-boundary enforcement, not the acceptance condition under test. The relevant result is: The handset and attached workstation use the intended separate networks and retain their authorized access.

Question 380

An administrator raises MAC limits on every port instead of diagnosing one device creating random source addresses. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. Only approved DHCP servers issue leases and the assigned endpoint identity or location remains traceable.
  2. A session's effective access changes only when the authorization result is accepted and policy is installed on hardware.
  3. The user VLAN reaches the authorized gateway without being placed on an unrelated physical FortiGate interface.
  4. An unexpected additional device is restricted or signaled without knocking out approved business equipment.

Explanation

Correct Answer

D:

An unexpected additional device is restricted or signaled without knocking out approved business equipment. Dynamic MAC learning limits reduce accidental fan-out but should be tuned for legitimate multi-device access designs.

Incorrect Answers

A:

Only approved DHCP servers issue leases and the assigned endpoint identity or location remains traceable. This result relates to DHCP server allowlist and Option 82 validation, not the acceptance condition under test. The relevant result is: An unexpected additional device is restricted or signaled without knocking out approved business equipment.

B:

A session's effective access changes only when the authorization result is accepted and policy is installed on hardware. This result relates to RADIUS change of authorization and applied session policy, not the acceptance condition under test. The relevant result is: An unexpected additional device is restricted or signaled without knocking out approved business equipment.

C:

The user VLAN reaches the authorized gateway without being placed on an unrelated physical FortiGate interface. This result relates to FortiGate managed FortiSwitch VLAN interface placement, not the acceptance condition under test. The relevant result is: An unexpected additional device is restricted or signaled without knocking out approved business equipment.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests