cert
cert-1
cert-2

Pass Fortinet NSE5_FSW_AD-7.6 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers to Pass the Actual Exam!
30 Days Free Updates, Instant Download!

cert-5
cert-6
NSE5_FSW_AD-7.6 Exam - Verified By Experts
NSE5_FSW_AD-7.6 Premium File

NSE5_FSW_AD-7.6 Premium File

$69.99
$76.99
  • Premium File 64 Questions & Answers. Last Update: Nov 15, 2026

Whats Included:

  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
 
$76.99
$69.99
accept 42 downloads in the last 7 days
block-screenshots
Fortinet NSE5_FSW_AD-7.6 Practice Test 37

Question 360

A voice client obtains an address yet keeps receiving ARP replies for the wrong gateway MAC. Which FortiSwitch configuration or corrective action BEST addresses the requirement?

  1. Identify FortiLink failures caused by split-interface, HA, MCLAG peer or ISL mismatches before changing unrelated ports.
  2. Define appropriate trusted ingress marking sources and classify untrusted frames before choosing egress queues.
  3. Mirror only the relevant source ports or VLAN traffic to a dedicated analyzer destination using supported SPAN settings.
  4. Trace DHCP and ARP exchanges at ingress and uplink to distinguish missing requests from blocked or malformed responses.

Explanation

Correct Answer

D:

Trace DHCP and ARP exchanges at ingress and uplink to distinguish missing requests from blocked or malformed responses. A DHCP lease failure can originate at the client, switch, relay or server; capturing at one side alone is not always conclusive. Verify the action with: Inspect Discover/Offer/Request/Ack sequence, ARP requests/replies, VLAN tags, DHCP snooping and DAI counters.

Incorrect Answers

A:

Identify FortiLink failures caused by split-interface, HA, MCLAG peer or ISL mismatches before changing unrelated ports. This action is relevant to FortiLink HA and MCLAG topology faults, not the controlling requirement in this case. FortiGate HA, FortiLink split-interface and FortiSwitch MCLAG have distinct failover behaviors that cannot be inferred from link LEDs alone. The targeted response is: Trace DHCP and ARP exchanges at ingress and uplink to distinguish missing requests from blocked or malformed responses.

B:

Define appropriate trusted ingress marking sources and classify untrusted frames before choosing egress queues. This action is relevant to QoS ingress classification and trust boundaries, not the controlling requirement in this case. A packet marking has no useful QoS effect until supported classification and scheduling map it consistently. The targeted response is: Trace DHCP and ARP exchanges at ingress and uplink to distinguish missing requests from blocked or malformed responses.

C:

Mirror only the relevant source ports or VLAN traffic to a dedicated analyzer destination using supported SPAN settings. This action is relevant to FortiSwitch port mirroring to network analyzer, not the controlling requirement in this case. A mirrored stream is passive evidence and can be incomplete if analyzer bandwidth is lower than the observed traffic. The targeted response is: Trace DHCP and ARP exchanges at ingress and uplink to distinguish missing requests from blocked or malformed responses.

Question 361

A standalone FortiSwitch has local management access but cannot reach its NTP server off-subnet. Which FortiSwitch configuration or corrective action BEST addresses the requirement?

  1. Set a supported default route or precise static prefix toward a reachable next hop and validate return traffic.
  2. Determine whether a switch is managed by FortiGate or standalone before setting interfaces, routes or admin policies.
  3. Check MAC-learning table and flooding behavior before replacing a switch or changing its IP routing.
  4. Authorize only intended discovered FortiSwitch serial numbers and confirm management mode after the expected transition.

Explanation

Correct Answer

A:

Set a supported default route or precise static prefix toward a reachable next hop and validate return traffic. A default route cannot repair local VLAN tagging or a missing neighbor resolution condition. Verify the action with: Check route table, next-hop ARP, ingress VLAN, egress interface, prefix length and return-route path.

Incorrect Answers

B:

Determine whether a switch is managed by FortiGate or standalone before setting interfaces, routes or admin policies. This action is relevant to FortiSwitch standalone versus FortiLink managed L3 ownership, not the controlling requirement in this case. Direct edits on a managed switch can be overridden; standalone configuration must be maintained and backed up independently. The targeted response is: Set a supported default route or precise static prefix toward a reachable next hop and validate return traffic.

C:

Check MAC-learning table and flooding behavior before replacing a switch or changing its IP routing. This action is relevant to Layer 2 MAC-learning and forwarding decisions, not the controlling requirement in this case. An L2 switch uses MAC destination and VLAN state for forwarding; a healthy SVI is not proof a host is on the proper port. The targeted response is: Set a supported default route or precise static prefix toward a reachable next hop and validate return traffic.

D:

Authorize only intended discovered FortiSwitch serial numbers and confirm management mode after the expected transition. This action is relevant to Discovered versus authorized FortiSwitch state, not the controlling requirement in this case. Switch discovery is not the same as authorization; auto-authorization has governance implications and a managed-mode transition may reboot the device. The targeted response is: Set a supported default route or precise static prefix toward a reachable next hop and validate return traffic.

Question 362

Guest users can browse the internet but should not access each other's devices on the same Wi-Fi-to-switch VLAN. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. The intended tenant configuration changes while other tenants retain their segmentation and service.
  2. A session's effective access changes only when the authorization result is accepted and policy is installed on hardware.
  3. Isolated clients can reach approved gateways while direct lateral traffic within the VLAN is blocked according to policy.
  4. Port traffic follows the assigned access security requirement without arbitrary drift after controller synchronization.

Explanation

Correct Answer

C:

Isolated clients can reach approved gateways while direct lateral traffic within the VLAN is blocked according to policy. Routing-level firewall rules may not inspect local Layer-2 forwarding unless intra-VLAN isolation is configured.

Incorrect Answers

A:

The intended tenant configuration changes while other tenants retain their segmentation and service. This result relates to Multi-tenant change verification and rollback, not the acceptance condition under test. The relevant result is: Isolated clients can reach approved gateways while direct lateral traffic within the VLAN is blocked according to policy.

B:

A session's effective access changes only when the authorization result is accepted and policy is installed on hardware. This result relates to RADIUS change of authorization and applied session policy, not the acceptance condition under test. The relevant result is: Isolated clients can reach approved gateways while direct lateral traffic within the VLAN is blocked according to policy.

D:

Port traffic follows the assigned access security requirement without arbitrary drift after controller synchronization. This result relates to FortiSwitch security profile application and precedence, not the acceptance condition under test. The relevant result is: Isolated clients can reach approved gateways while direct lateral traffic within the VLAN is blocked according to policy.

Question 363

The configured FortiLink aggregate connects to a single switch but its split-interface setting does not match the topology. Which FortiSwitch configuration or corrective action BEST addresses the requirement?

  1. Assign FortiSwitch VLANs and ports to the intended FortiGate VDOM with explicit isolation and governed shared infrastructure.
  2. Create an appropriate FortiGate FortiLink physical or logical interface with supported addressing and controller capabilities before onboarding a switch.
  3. Prepare supported provisioning, DHCP, management connectivity and secure bootstrap before assuming a factory-default FortiSwitch will auto-configure.
  4. Apply authorized device-class rules and dynamic port policies after confirming device detection evidence and fallback outcomes.

Explanation

Correct Answer

B:

Create an appropriate FortiGate FortiLink physical or logical interface with supported addressing and controller capabilities before onboarding a switch. A FortiGate port not configured for FortiLink cannot assume managed-switch ownership from physical connection alone. Verify the action with: Check interface type, FortiLink enablement, discovery setting, IP assignment, switch model support, and management VLAN reachability.

Incorrect Answers

A:

Assign FortiSwitch VLANs and ports to the intended FortiGate VDOM with explicit isolation and governed shared infrastructure. This action is relevant to FortiGate VDOM-based FortiSwitch tenant assignment, not the controlling requirement in this case. A VDOM creates a separate policy and routing context; it does not by itself make a shared physical switch port safe for all tenants. The targeted response is: Create an appropriate FortiGate FortiLink physical or logical interface with supported addressing and controller capabilities before onboarding a switch.

C:

Prepare supported provisioning, DHCP, management connectivity and secure bootstrap before assuming a factory-default FortiSwitch will auto-configure. This action is relevant to Zero-touch provisioning and controller dependency checks, not the controlling requirement in this case. Zero-touch deployment works only when the necessary discovery path and identity checks function; a link LED is insufficient. The targeted response is: Create an appropriate FortiGate FortiLink physical or logical interface with supported addressing and controller capabilities before onboarding a switch.

D:

Apply authorized device-class rules and dynamic port policies after confirming device detection evidence and fallback outcomes. This action is relevant to NAC dynamic port policy device classification, not the controlling requirement in this case. NAC assignment relies on reliable detection and a defined precedence; a class label is not a substitute for switch-port policy. The targeted response is: Create an appropriate FortiGate FortiLink physical or logical interface with supported addressing and controller capabilities before onboarding a switch.

Question 364

A standby FortiLink port never takes over because its intended peer and discovery state were not prepared. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. A planned alternate link remains blocked and takes over predictably without a broadcast storm.
  2. A redundant topology recovers after a link failure without simultaneous independent forwarding paths causing loops.
  3. Only intended networks are reachable through the configured route and the return path remains valid.
  4. A trace shows the expected ingress/egress control packets without collecting unrelated sensitive network traffic.

Explanation

Correct Answer

B:

A redundant topology recovers after a link failure without simultaneous independent forwarding paths causing loops. FortiLink split-interface behavior depends on topology; enabling it blindly for same-peer LAG links can break intended aggregation.

Incorrect Answers

A:

A planned alternate link remains blocked and takes over predictably without a broadcast storm. This result relates to MSTP region consistency and designated root, not the acceptance condition under test. The relevant result is: A redundant topology recovers after a link failure without simultaneous independent forwarding paths causing loops.

C:

Only intended networks are reachable through the configured route and the return path remains valid. This result relates to Static route and default gateway validation, not the acceptance condition under test. The relevant result is: A redundant topology recovers after a link failure without simultaneous independent forwarding paths causing loops.

D:

A trace shows the expected ingress/egress control packets without collecting unrelated sensitive network traffic. This result relates to FortiSwitch local packet-capture profile and filters, not the acceptance condition under test. The relevant result is: A redundant topology recovers after a link failure without simultaneous independent forwarding paths causing loops.

Question 365

A previously used standalone switch never auto-discovers because its old configuration prevents expected default provisioning. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. The new FortiSwitch discovers the designated controller while unrelated FortiGate interfaces retain their normal function.
  2. The managed switch retains the intended controller-pushed policy after a controlled synchronization and restart.
  3. Members receive subscribed streams while unsubscribed access ports are not flooded unnecessarily.
  4. The switch successfully onboards to the intended FortiGate and retains a recoverable controller-managed baseline.

Explanation

Correct Answer

D:

The switch successfully onboards to the intended FortiGate and retains a recoverable controller-managed baseline. Zero-touch deployment works only when the necessary discovery path and identity checks function; a link LED is insufficient.

Incorrect Answers

A:

The new FortiSwitch discovers the designated controller while unrelated FortiGate interfaces retain their normal function. This result relates to FortiLink management interface provisioning, not the acceptance condition under test. The relevant result is: The switch successfully onboards to the intended FortiGate and retains a recoverable controller-managed baseline.

B:

The managed switch retains the intended controller-pushed policy after a controlled synchronization and restart. This result relates to Managed switch configuration synchronization, not the acceptance condition under test. The relevant result is: The switch successfully onboards to the intended FortiGate and retains a recoverable controller-managed baseline.

C:

Members receive subscribed streams while unsubscribed access ports are not flooded unnecessarily. This result relates to IGMP snooping and multicast receivers, not the acceptance condition under test. The relevant result is: The switch successfully onboards to the intended FortiGate and retains a recoverable controller-managed baseline.

Question 366

A team interprets seeing a DHCP Discover at the mirror as proof the server's Offer reached the requesting access port. Which FortiSwitch configuration or corrective action BEST addresses the requirement?

  1. Correlate LLDP neighbor inventory and VLAN-specific MAC entries to reconstruct actual endpoint and uplink paths.
  2. Create an appropriate FortiGate FortiLink physical or logical interface with supported addressing and controller capabilities before onboarding a switch.
  3. Distinguish FortiSwitch discovery from authorization, and restore the correct controller ownership without automatically trusting unknown devices.
  4. Use a supported FortiGate one-arm sniffer or mirrored ingress path to inspect switch traffic where permitted.

Explanation

Correct Answer

D:

Use a supported FortiGate one-arm sniffer or mirrored ingress path to inspect switch traffic where permitted. Sniffer placement determines visibility; absence of a packet at one observation point does not prove no packet existed elsewhere. Verify the action with: Verify mirror connection, FortiGate sniffing interface, capture expression, expected VLAN tags and packet direction.

Incorrect Answers

A:

Correlate LLDP neighbor inventory and VLAN-specific MAC entries to reconstruct actual endpoint and uplink paths. This action is relevant to LLDP and MAC forwarding table extraction, not the controlling requirement in this case. LLDP provides adjacent-device identity, while MAC learning maps forwarding; neither is a full routed trace by itself. The targeted response is: Use a supported FortiGate one-arm sniffer or mirrored ingress path to inspect switch traffic where permitted.

B:

Create an appropriate FortiGate FortiLink physical or logical interface with supported addressing and controller capabilities before onboarding a switch. This action is relevant to FortiLink management interface provisioning, not the controlling requirement in this case. A FortiGate port not configured for FortiLink cannot assume managed-switch ownership from physical connection alone. The targeted response is: Use a supported FortiGate one-arm sniffer or mirrored ingress path to inspect switch traffic where permitted.

C:

Distinguish FortiSwitch discovery from authorization, and restore the correct controller ownership without automatically trusting unknown devices. This action is relevant to Controller authorization and pending-switch state, not the controlling requirement in this case. Authorizing a switch is an administrative trust step; pending switch state is not evidence of a routing failure. The targeted response is: Use a supported FortiGate one-arm sniffer or mirrored ingress path to inspect switch traffic where permitted.

Question 367

A VLAN on the firewall has an IP but no approved intra-VLAN or inter-VLAN policy for the intended client traffic. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. The intended VLAN survives a switch restart without unexpected controller overwrite or unauthorized local change.
  2. The user VLAN reaches the authorized gateway without being placed on an unrelated physical FortiGate interface.
  3. An access host receives the right subnet while only approved tagged VLANs traverse the uplink.
  4. Isolated clients can reach approved gateways while direct lateral traffic within the VLAN is blocked according to policy.

Explanation

Correct Answer

B:

The user VLAN reaches the authorized gateway without being placed on an unrelated physical FortiGate interface. A named VLAN in FortiOS is not proof its switch-port membership and L3 policy are correct.

Incorrect Answers

A:

The intended VLAN survives a switch restart without unexpected controller overwrite or unauthorized local change. This result relates to VLAN configuration persistence and drift control, not the acceptance condition under test. The relevant result is: The user VLAN reaches the authorized gateway without being placed on an unrelated physical FortiGate interface.

C:

An access host receives the right subnet while only approved tagged VLANs traverse the uplink. This result relates to FortiSwitch native VLAN versus allowed VLANs, not the acceptance condition under test. The relevant result is: The user VLAN reaches the authorized gateway without being placed on an unrelated physical FortiGate interface.

D:

Isolated clients can reach approved gateways while direct lateral traffic within the VLAN is blocked according to policy. This result relates to Intra-VLAN blocking and isolation boundaries, not the acceptance condition under test. The relevant result is: The user VLAN reaches the authorized gateway without being placed on an unrelated physical FortiGate interface.

Question 368

A guest laptop marks all packets EF and monopolizes a priority queue on a shared access port. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Examine BPDU ingress counters, configured edge flag, port-down reason, connected device and recovery policy.
  2. Inspect transceiver SKU, supported compatibility table, Tx/Rx optical power, interface alarms and cable plant type.
  3. Check switch serial, active software version, current synchronized configuration, backup timestamp, integrity and recovery permissions.
  4. Inspect incoming 802.1p and DSCP markings, trust mode, QoS map, physical port and classification counters.

Explanation

Correct Answer

D:

Inspect incoming 802.1p and DSCP markings, trust mode, QoS map, physical port and classification counters. A packet marking has no useful QoS effect until supported classification and scheduling map it consistently. The paired action is: Define appropriate trusted ingress marking sources and classify untrusted frames before choosing egress queues.

Incorrect Answers

A:

Examine BPDU ingress counters, configured edge flag, port-down reason, connected device and recovery policy. These observations are applicable to BPDU guard on endpoint-facing ports, but would not isolate the main failure first. The decisive evidence is: Inspect incoming 802.1p and DSCP markings, trust mode, QoS map, physical port and classification counters.

B:

Inspect transceiver SKU, supported compatibility table, Tx/Rx optical power, interface alarms and cable plant type. These observations are applicable to Optic compatibility and laser diagnostic evidence, but would not isolate the main failure first. The decisive evidence is: Inspect incoming 802.1p and DSCP markings, trust mode, QoS map, physical port and classification counters.

C:

Check switch serial, active software version, current synchronized configuration, backup timestamp, integrity and recovery permissions. These observations are applicable to Config backup and firmware inventory evidence, but would not isolate the main failure first. The decisive evidence is: Inspect incoming 802.1p and DSCP markings, trust mode, QoS map, physical port and classification counters.

Question 369

A branch begins firmware rollout on every downstream switch without checking supported controller compatibility. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. The managed switch retains the intended controller-pushed policy after a controlled synchronization and restart.
  2. Switches reconnect to FortiLink and preserve approved VLAN/role configuration after the planned upgrade.
  3. The switch successfully onboards to the intended FortiGate and retains a recoverable controller-managed baseline.
  4. A failed managed switch can be replaced with supported firmware and restored authorized port/VLAN behavior.

Explanation

Correct Answer

B:

Switches reconnect to FortiLink and preserve approved VLAN/role configuration after the planned upgrade. A successful image upload does not prove switch operation or controller compatibility after reboot.

Incorrect Answers

A:

The managed switch retains the intended controller-pushed policy after a controlled synchronization and restart. This result relates to Managed switch configuration synchronization, not the acceptance condition under test. The relevant result is: Switches reconnect to FortiLink and preserve approved VLAN/role configuration after the planned upgrade.

C:

The switch successfully onboards to the intended FortiGate and retains a recoverable controller-managed baseline. This result relates to Zero-touch provisioning and controller dependency checks, not the acceptance condition under test. The relevant result is: Switches reconnect to FortiLink and preserve approved VLAN/role configuration after the planned upgrade.

D:

A failed managed switch can be replaced with supported firmware and restored authorized port/VLAN behavior. This result relates to Config backup and firmware inventory evidence, not the acceptance condition under test. The relevant result is: Switches reconnect to FortiLink and preserve approved VLAN/role configuration after the planned upgrade.

Question 370

A handset supports LLDP-MED but the access switch is configured only to receive LLDP and not advertise local policy. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Examine LLDP transmit state, port profile, neighbor TLVs, advertised VLAN and DSCP or 802.1p settings.
  2. Inspect Discover/Offer/Request/Ack sequence, ARP requests/replies, VLAN tags, DHCP snooping and DAI counters.
  3. Check both peer capabilities, auto-negotiation, administrative speed, cable quality and CRC/FCS counters.
  4. Inspect local and remote chassis and port IDs, TLV freshness, management address, interval and LLDP-MED location settings.

Explanation

Correct Answer

A:

Examine LLDP transmit state, port profile, neighbor TLVs, advertised VLAN and DSCP or 802.1p settings. LLDP-MED exchanges policy hints with compatible endpoints; it does not substitute for port membership and DHCP. The paired action is: Configure supported LLDP-MED voice policy so a compatible handset learns its VLAN and traffic priority.

Incorrect Answers

B:

Inspect Discover/Offer/Request/Ack sequence, ARP requests/replies, VLAN tags, DHCP snooping and DAI counters. These observations are applicable to Capture-based DHCP and ARP path isolation, but would not isolate the main failure first. The decisive evidence is: Examine LLDP transmit state, port profile, neighbor TLVs, advertised VLAN and DSCP or 802.1p settings.

C:

Check both peer capabilities, auto-negotiation, administrative speed, cable quality and CRC/FCS counters. These observations are applicable to Switch port speed and duplex commissioning, but would not isolate the main failure first. The decisive evidence is: Examine LLDP transmit state, port profile, neighbor TLVs, advertised VLAN and DSCP or 802.1p settings.

D:

Inspect local and remote chassis and port IDs, TLV freshness, management address, interval and LLDP-MED location settings. These observations are applicable to LLDP neighbor discovery and location information, but would not isolate the main failure first. The decisive evidence is: Examine LLDP transmit state, port profile, neighbor TLVs, advertised VLAN and DSCP or 802.1p settings.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests