cert
cert-1
cert-2

Pass Fortinet NSE5_FSW_AD-7.6 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers to Pass the Actual Exam!
30 Days Free Updates, Instant Download!

cert-5
cert-6
NSE5_FSW_AD-7.6 Exam - Verified By Experts
NSE5_FSW_AD-7.6 Premium File

NSE5_FSW_AD-7.6 Premium File

$69.99
$76.99
  • Premium File 64 Questions & Answers. Last Update: Nov 15, 2026

Whats Included:

  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
 
$76.99
$69.99
accept 42 downloads in the last 7 days
block-screenshots
Fortinet NSE5_FSW_AD-7.6 Practice Test 3

Question 20

A guest laptop marks all packets EF and monopolizes a priority queue on a shared access port. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. Each customer's tagged traffic reaches only its assigned service context without S-VLAN collision.
  2. Phones and access points receive stable allocated power while redundant PSU and priority policies remain within budget.
  3. Voice packets receive intended treatment without allowing arbitrary untrusted hosts to claim top priority.
  4. The correct link establishes at expected negotiated rate without recurring loss-of-signal or CRC errors.

Explanation

Correct Answer

C:

Voice packets receive intended treatment without allowing arbitrary untrusted hosts to claim top priority. A packet marking has no useful QoS effect until supported classification and scheduling map it consistently.

Incorrect Answers

A:

Each customer's tagged traffic reaches only its assigned service context without S-VLAN collision. This result relates to QinQ outer and inner VLAN tenant mapping, not the acceptance condition under test. The relevant result is: Voice packets receive intended treatment without allowing arbitrary untrusted hosts to claim top priority.

B:

Phones and access points receive stable allocated power while redundant PSU and priority policies remain within budget. This result relates to PoE and LLDP-MED endpoint power coordination, not the acceptance condition under test. The relevant result is: Voice packets receive intended treatment without allowing arbitrary untrusted hosts to claim top priority.

D:

The correct link establishes at expected negotiated rate without recurring loss-of-signal or CRC errors. This result relates to Optic compatibility and laser diagnostic evidence, not the acceptance condition under test. The relevant result is: Voice packets receive intended treatment without allowing arbitrary untrusted hosts to claim top priority.

Question 21

A voice client obtains an address yet keeps receiving ARP replies for the wrong gateway MAC. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. The exact dropped direction or incorrect address binding is evidenced before changing a security feature.
  2. A failed managed switch can be replaced with supported firmware and restored authorized port/VLAN behavior.
  3. Controller and switch return to supported synchronized software and configuration with test-client services restored.
  4. A planned alternate link remains blocked and takes over predictably without a broadcast storm.

Explanation

Correct Answer

A:

The exact dropped direction or incorrect address binding is evidenced before changing a security feature. A DHCP lease failure can originate at the client, switch, relay or server; capturing at one side alone is not always conclusive.

Incorrect Answers

B:

A failed managed switch can be replaced with supported firmware and restored authorized port/VLAN behavior. This result relates to Config backup and firmware inventory evidence, not the acceptance condition under test. The relevant result is: The exact dropped direction or incorrect address binding is evidenced before changing a security feature.

C:

Controller and switch return to supported synchronized software and configuration with test-client services restored. This result relates to FortiLink synchronization and upgrade troubleshooting, not the acceptance condition under test. The relevant result is: The exact dropped direction or incorrect address binding is evidenced before changing a security feature.

D:

A planned alternate link remains blocked and takes over predictably without a broadcast storm. This result relates to MSTP region consistency and designated root, not the acceptance condition under test. The relevant result is: The exact dropped direction or incorrect address binding is evidenced before changing a security feature.

Question 22

An engineer enables point-to-point FortiLink on one side of a bridge but not on the peer. Which FortiSwitch configuration or corrective action BEST addresses the requirement?

  1. Use documented peer-group and downstream trunk configuration for MCLAG rather than creating ad hoc parallel Ethernet links.
  2. Plan S-VLAN and C-VLAN mapping with the correct FortiLink VDOM and platform support for tenant-tagged traffic.
  3. Enable IPv4 source guard on supported switch interfaces only with appropriate DHCP snooping or static bindings.
  4. Use supported FortiLink point-to-point L2 or Layer-3 transport configuration and validate discovery and control traffic end to end.

Explanation

Correct Answer

D:

Use supported FortiLink point-to-point L2 or Layer-3 transport configuration and validate discovery and control traffic end to end. FortiLink over intermediate networks requires topology-specific settings; ordinary IP reachability alone does not establish FortiLink discovery. Verify the action with: Inspect supported topology, FortiLink p2p settings, TPID, transport reachability, discovery frames and switch firmware.

Incorrect Answers

A:

Use documented peer-group and downstream trunk configuration for MCLAG rather than creating ad hoc parallel Ethernet links. This action is relevant to MCLAG multichassis access redundancy, not the controlling requirement in this case. MCLAG requires peer coordination and correct downstream aggregation; it is not equivalent to connecting independent switches in parallel. The targeted response is: Use supported FortiLink point-to-point L2 or Layer-3 transport configuration and validate discovery and control traffic end to end.

B:

Plan S-VLAN and C-VLAN mapping with the correct FortiLink VDOM and platform support for tenant-tagged traffic. This action is relevant to QinQ outer and inner VLAN tenant mapping, not the controlling requirement in this case. QinQ layering and VDOM assignment are separate controls; wrong outer tagging can mix customers even when inner VLAN IDs differ. The targeted response is: Use supported FortiLink point-to-point L2 or Layer-3 transport configuration and validate discovery and control traffic end to end.

C:

Enable IPv4 source guard on supported switch interfaces only with appropriate DHCP snooping or static bindings. This action is relevant to IPv4 source guard and binding-based packet filtering, not the controlling requirement in this case. Source guard is an ingress source-binding check, not a full replacement for routed firewall policies or endpoint security. The targeted response is: Use supported FortiLink point-to-point L2 or Layer-3 transport configuration and validate discovery and control traffic end to end.

Question 23

A phone is moved to another floor but its advertised LLDP-MED location still references the old closet. Which FortiSwitch configuration or corrective action BEST addresses the requirement?

  1. Use FortiLink split-interface or standby interfaces only for supported topology and verify active versus backup port behavior.
  2. Configure supported LLDP-MED voice policy so a compatible handset learns its VLAN and traffic priority.
  3. Validate LLDP advertisements, hold timers, peer identity and optional location data before trusting topology or emergency-service records.
  4. Diagnose multi-VDOM client isolation issues by correlating switch VLAN assignment and FortiGate VDOM routing/policy evidence.

Explanation

Correct Answer

C:

Validate LLDP advertisements, hold timers, peer identity and optional location data before trusting topology or emergency-service records. LLDP is an L2 discovery protocol and cannot prove the whole routed service path or phone emergency-location correctness by itself. Verify the action with: Inspect local and remote chassis and port IDs, TLV freshness, management address, interval and LLDP-MED location settings.

Incorrect Answers

A:

Use FortiLink split-interface or standby interfaces only for supported topology and verify active versus backup port behavior. This action is relevant to FortiLink split-interface and standby path design, not the controlling requirement in this case. FortiLink split-interface behavior depends on topology; enabling it blindly for same-peer LAG links can break intended aggregation. The targeted response is: Validate LLDP advertisements, hold timers, peer identity and optional location data before trusting topology or emergency-service records.

B:

Configure supported LLDP-MED voice policy so a compatible handset learns its VLAN and traffic priority. This action is relevant to LLDP-MED voice network policy advertisements, not the controlling requirement in this case. LLDP-MED exchanges policy hints with compatible endpoints; it does not substitute for port membership and DHCP. The targeted response is: Validate LLDP advertisements, hold timers, peer identity and optional location data before trusting topology or emergency-service records.

D:

Diagnose multi-VDOM client isolation issues by correlating switch VLAN assignment and FortiGate VDOM routing/policy evidence. This action is relevant to Managed tenant troubleshooting across controller and access layer, not the controlling requirement in this case. A packet may be correctly switched but rejected by VDOM routing or firewall policy, or incorrectly admitted to another tenant at Layer 2. The targeted response is: Validate LLDP advertisements, hold timers, peer identity and optional location data before trusting topology or emergency-service records.

Question 24

A user moves between ports and the stale binding on the old port rejects the new legitimate lease. Which FortiSwitch configuration or corrective action BEST addresses the requirement?

  1. Use supported dynamic ARP inspection with valid switch bindings to reject spoofed IP-MAC claims at untrusted edges.
  2. Attach an approved port-security or switch-security profile to the correct FortiSwitch access port and verify effective policy precedence.
  3. Enable IPv4 source guard on supported switch interfaces only with appropriate DHCP snooping or static bindings.
  4. Use a supported FortiGate one-arm sniffer or mirrored ingress path to inspect switch traffic where permitted.

Explanation

Correct Answer

C:

Enable IPv4 source guard on supported switch interfaces only with appropriate DHCP snooping or static bindings. Source guard is an ingress source-binding check, not a full replacement for routed firewall policies or endpoint security. Verify the action with: Examine port binding list, packet source IP, ingress VLAN, IP-source guard counters and expected host subnet.

Incorrect Answers

A:

Use supported dynamic ARP inspection with valid switch bindings to reject spoofed IP-MAC claims at untrusted edges. This action is relevant to Dynamic ARP inspection with DHCP snooping bindings, not the controlling requirement in this case. DAI validation needs a reliable binding or exception policy; enabling it blindly can interrupt static-IP devices. The targeted response is: Enable IPv4 source guard on supported switch interfaces only with appropriate DHCP snooping or static bindings.

B:

Attach an approved port-security or switch-security profile to the correct FortiSwitch access port and verify effective policy precedence. This action is relevant to FortiSwitch security profile application and precedence, not the controlling requirement in this case. A named security profile sitting in configuration is not proof that it was applied to the intended hardware port. The targeted response is: Enable IPv4 source guard on supported switch interfaces only with appropriate DHCP snooping or static bindings.

D:

Use a supported FortiGate one-arm sniffer or mirrored ingress path to inspect switch traffic where permitted. This action is relevant to FortiGate one-arm sniffer across managed switching, not the controlling requirement in this case. Sniffer placement determines visibility; absence of a packet at one observation point does not prove no packet existed elsewhere. The targeted response is: Enable IPv4 source guard on supported switch interfaces only with appropriate DHCP snooping or static bindings.

Question 25

A phone uplink starts receiving unexpected bridge-control frames after someone adds a looped desktop switch. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. A failed managed switch can be replaced with supported firmware and restored authorized port/VLAN behavior.
  2. Inspect MCLAG peer status, inter-chassis link, negotiated aggregate IDs, VLAN consistency and controller topology.
  3. Examine BPDU ingress counters, configured edge flag, port-down reason, connected device and recovery policy.
  4. Enable supported BPDU guard only on true edge/client ports, and restore blocked ports after identifying unauthorized switching.
  5. Use compatible spanning-tree mode across connected switches and verify per-VLAN root and blocked links.

Explanation

Correct Answers

C:

Examine BPDU ingress counters, configured edge flag, port-down reason, connected device and recovery policy. BPDU guard can disable an intended trunk if incorrectly treated as an end-station port. The paired action is: Enable supported BPDU guard only on true edge/client ports, and restore blocked ports after identifying unauthorized switching. This is the diagnostic or verification half of the requested TWO-step pair.

D:

Enable supported BPDU guard only on true edge/client ports, and restore blocked ports after identifying unauthorized switching. BPDU guard can disable an intended trunk if incorrectly treated as an end-station port. Verify the action with: Examine BPDU ingress counters, configured edge flag, port-down reason, connected device and recovery policy. This is the configuration or remediation half of the requested TWO-step pair.

Incorrect Answers

A:

A failed managed switch can be replaced with supported firmware and restored authorized port/VLAN behavior. This step concerns Config backup and firmware inventory evidence and is not part of the required paired solution. The correct action and evidence are: Enable supported BPDU guard only on true edge/client ports, and restore blocked ports after identifying unauthorized switching. Together with: Examine BPDU ingress counters, configured edge flag, port-down reason, connected device and recovery policy.

B:

Inspect MCLAG peer status, inter-chassis link, negotiated aggregate IDs, VLAN consistency and controller topology. This step concerns MCLAG peer-link topology for managed access switches and is not part of the required paired solution. The correct action and evidence are: Enable supported BPDU guard only on true edge/client ports, and restore blocked ports after identifying unauthorized switching. Together with: Examine BPDU ingress counters, configured edge flag, port-down reason, connected device and recovery policy.

E:

Use compatible spanning-tree mode across connected switches and verify per-VLAN root and blocked links. This step concerns RPVST and supported STP mode interoperability and is not part of the required paired solution. The correct action and evidence are: Enable supported BPDU guard only on true edge/client ports, and restore blocked ports after identifying unauthorized switching. Together with: Examine BPDU ingress counters, configured edge flag, port-down reason, connected device and recovery policy.

Question 26

A phone is moved to another floor but its advertised LLDP-MED location still references the old closet. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Inspect power supply reserve, current draw, negotiated PoE class, priority shedding and port events.
  2. Inspect transceiver SKU, supported compatibility table, Tx/Rx optical power, interface alarms and cable plant type.
  3. Inspect local and remote chassis and port IDs, TLV freshness, management address, interval and LLDP-MED location settings.
  4. Inspect port profile assignment, FortiGate controller policy, client role, enforcement counters and overlapping static controls.

Explanation

Correct Answer

C:

Inspect local and remote chassis and port IDs, TLV freshness, management address, interval and LLDP-MED location settings. LLDP is an L2 discovery protocol and cannot prove the whole routed service path or phone emergency-location correctness by itself. The paired action is: Validate LLDP advertisements, hold timers, peer identity and optional location data before trusting topology or emergency-service records.

Incorrect Answers

A:

Inspect power supply reserve, current draw, negotiated PoE class, priority shedding and port events. These observations are applicable to Power over Ethernet port controls and budgets, but would not isolate the main failure first. The decisive evidence is: Inspect local and remote chassis and port IDs, TLV freshness, management address, interval and LLDP-MED location settings.

B:

Inspect transceiver SKU, supported compatibility table, Tx/Rx optical power, interface alarms and cable plant type. These observations are applicable to Optic compatibility and laser diagnostic evidence, but would not isolate the main failure first. The decisive evidence is: Inspect local and remote chassis and port IDs, TLV freshness, management address, interval and LLDP-MED location settings.

D:

Inspect port profile assignment, FortiGate controller policy, client role, enforcement counters and overlapping static controls. These observations are applicable to FortiSwitch security profile application and precedence, but would not isolate the main failure first. The decisive evidence is: Inspect local and remote chassis and port IDs, TLV freshness, management address, interval and LLDP-MED location settings.

Question 27

A badge printer cannot run an EAP supplicant and is given an unrestricted staff VLAN rather than a limited MAC-auth profile. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. Authorized endpoints enter only permitted VLANs while failed authentication is denied or restricted according to policy.
  2. Unauthorized source IP packets fail while an approved host continues using its assigned IP and address policy.
  3. Management connectivity is established across the supported intermediate network without losing segmentation or authentication assumptions.
  4. Approved legacy devices gain only restricted services while unknown or spoofed MAC addresses remain constrained.

Explanation

Correct Answer

D:

Approved legacy devices gain only restricted services while unknown or spoofed MAC addresses remain constrained. A MAC address can be cloned; MAC authentication must be combined with appropriate segmentation and monitoring.

Incorrect Answers

A:

Authorized endpoints enter only permitted VLANs while failed authentication is denied or restricted according to policy. This result relates to FortiSwitch 802.1X port-based authentication, not the acceptance condition under test. The relevant result is: Approved legacy devices gain only restricted services while unknown or spoofed MAC addresses remain constrained.

B:

Unauthorized source IP packets fail while an approved host continues using its assigned IP and address policy. This result relates to IPv4 source guard and binding-based packet filtering, not the acceptance condition under test. The relevant result is: Approved legacy devices gain only restricted services while unknown or spoofed MAC addresses remain constrained.

C:

Management connectivity is established across the supported intermediate network without losing segmentation or authentication assumptions. This result relates to FortiLink transport over nontrivial L2 or L3 paths, not the acceptance condition under test. The relevant result is: Approved legacy devices gain only restricted services while unknown or spoofed MAC addresses remain constrained.

Question 28

A video stream reaches all desks even though only two phones subscribe to the multicast group. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. Inspect power supply reserve, current draw, negotiated PoE class, priority shedding and port events.
  2. Configure supported switch virtual interfaces and routed gateway addresses with correct VLAN, subnet and management context.
  3. Check group membership table, querier identity, IGMP report traffic, VLAN and target egress port.
  4. Configure supported IGMP snooping and querier expectations to forward multicast only where receivers request it.
  5. FortiGate captures the suspected frames at the chosen observation point without altering the user traffic policy.

Explanation

Correct Answers

C:

Check group membership table, querier identity, IGMP report traffic, VLAN and target egress port. A multicast VLAN alone does not indicate that IGMP receiver membership or querier operation is healthy. The paired action is: Configure supported IGMP snooping and querier expectations to forward multicast only where receivers request it. This is the diagnostic or verification half of the requested TWO-step pair.

D:

Configure supported IGMP snooping and querier expectations to forward multicast only where receivers request it. A multicast VLAN alone does not indicate that IGMP receiver membership or querier operation is healthy. Verify the action with: Check group membership table, querier identity, IGMP report traffic, VLAN and target egress port. This is the configuration or remediation half of the requested TWO-step pair.

Incorrect Answers

A:

Inspect power supply reserve, current draw, negotiated PoE class, priority shedding and port events. This step concerns Power over Ethernet port controls and budgets and is not part of the required paired solution. The correct action and evidence are: Configure supported IGMP snooping and querier expectations to forward multicast only where receivers request it. Together with: Check group membership table, querier identity, IGMP report traffic, VLAN and target egress port.

B:

Configure supported switch virtual interfaces and routed gateway addresses with correct VLAN, subnet and management context. This step concerns FortiSwitch SVI routing and connected routes and is not part of the required paired solution. The correct action and evidence are: Configure supported IGMP snooping and querier expectations to forward multicast only where receivers request it. Together with: Check group membership table, querier identity, IGMP report traffic, VLAN and target egress port.

E:

FortiGate captures the suspected frames at the chosen observation point without altering the user traffic policy. This step concerns FortiGate one-arm sniffer across managed switching and is not part of the required paired solution. The correct action and evidence are: Configure supported IGMP snooping and querier expectations to forward multicast only where receivers request it. Together with: Check group membership table, querier identity, IGMP report traffic, VLAN and target egress port.

Question 29

A switch has IGMP snooping enabled but no effective querier and group entries age out unexpectedly. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. FortiGate captures the suspected frames at the chosen observation point without altering the user traffic policy.
  2. Check both peer capabilities, auto-negotiation, administrative speed, cable quality and CRC/FCS counters.
  3. Check group membership table, querier identity, IGMP report traffic, VLAN and target egress port.
  4. Configure supported IGMP snooping and querier expectations to forward multicast only where receivers request it.
  5. Determine whether a switch is managed by FortiGate or standalone before setting interfaces, routes or admin policies.

Explanation

Correct Answers

C:

Check group membership table, querier identity, IGMP report traffic, VLAN and target egress port. A multicast VLAN alone does not indicate that IGMP receiver membership or querier operation is healthy. The paired action is: Configure supported IGMP snooping and querier expectations to forward multicast only where receivers request it. This is the diagnostic or verification half of the requested TWO-step pair.

D:

Configure supported IGMP snooping and querier expectations to forward multicast only where receivers request it. A multicast VLAN alone does not indicate that IGMP receiver membership or querier operation is healthy. Verify the action with: Check group membership table, querier identity, IGMP report traffic, VLAN and target egress port. This is the configuration or remediation half of the requested TWO-step pair.

Incorrect Answers

A:

FortiGate captures the suspected frames at the chosen observation point without altering the user traffic policy. This step concerns FortiGate one-arm sniffer across managed switching and is not part of the required paired solution. The correct action and evidence are: Configure supported IGMP snooping and querier expectations to forward multicast only where receivers request it. Together with: Check group membership table, querier identity, IGMP report traffic, VLAN and target egress port.

B:

Check both peer capabilities, auto-negotiation, administrative speed, cable quality and CRC/FCS counters. This step concerns Switch port speed and duplex commissioning and is not part of the required paired solution. The correct action and evidence are: Configure supported IGMP snooping and querier expectations to forward multicast only where receivers request it. Together with: Check group membership table, querier identity, IGMP report traffic, VLAN and target egress port.

E:

Determine whether a switch is managed by FortiGate or standalone before setting interfaces, routes or admin policies. This step concerns FortiSwitch standalone versus FortiLink managed L3 ownership and is not part of the required paired solution. The correct action and evidence are: Configure supported IGMP snooping and querier expectations to forward multicast only where receivers request it. Together with: Check group membership table, querier identity, IGMP report traffic, VLAN and target egress port.

Question 30

A campus extends two-tier managed switching across a narrow uplink and experiences unexpected bottlenecks. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Inspect shared-port VLAN diff, tenant inventory, VDOM policy, change approval and representative positive/negative access tests.
  2. Review firmware compatibility, release notes, current image, boot fallback, managed switch inventory and upgrade sequencing.
  3. Inspect DHCP server permitted list, Option 82 insertion/trust state, relay path, client bindings and lease evidence.
  4. Check managed tree, ISL link health, model compatibility, VLAN carriage, depth limitations and upstream aggregate status.

Explanation

Correct Answer

D:

Check managed tree, ISL link health, model compatibility, VLAN carriage, depth limitations and upstream aggregate status. A FortiGate controls each FortiSwitch through the managed Layer-2 topology, but downstream reachability depends on upstream FortiLink links. The paired action is: Build a documented supported FortiSwitch daisy chain or multi-tier topology with adequate ISL uplink capacity and safeguards.

Incorrect Answers

A:

Inspect shared-port VLAN diff, tenant inventory, VDOM policy, change approval and representative positive/negative access tests. These observations are applicable to Multi-tenant change verification and rollback, but would not isolate the main failure first. The decisive evidence is: Check managed tree, ISL link health, model compatibility, VLAN carriage, depth limitations and upstream aggregate status.

B:

Review firmware compatibility, release notes, current image, boot fallback, managed switch inventory and upgrade sequencing. These observations are applicable to Firmware and lifecycle preparation for FortiSwitch, but would not isolate the main failure first. The decisive evidence is: Check managed tree, ISL link health, model compatibility, VLAN carriage, depth limitations and upstream aggregate status.

C:

Inspect DHCP server permitted list, Option 82 insertion/trust state, relay path, client bindings and lease evidence. These observations are applicable to DHCP server allowlist and Option 82 validation, but would not isolate the main failure first. The decisive evidence is: Check managed tree, ISL link health, model compatibility, VLAN carriage, depth limitations and upstream aggregate status.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests