cert
cert-1
cert-2

Pass Fortinet NSE5_FSW_AD-7.6 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers to Pass the Actual Exam!
30 Days Free Updates, Instant Download!

cert-5
cert-6
NSE5_FSW_AD-7.6 Exam - Verified By Experts
NSE5_FSW_AD-7.6 Premium File

NSE5_FSW_AD-7.6 Premium File

$69.99
$76.99
  • Premium File 64 Questions & Answers. Last Update: Nov 15, 2026

Whats Included:

  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
 
$76.99
$69.99
accept 42 downloads in the last 7 days
block-screenshots
Fortinet NSE5_FSW_AD-7.6 Practice Test 1

Question 1

One upstream switch loses power and all child switches disappear from the FortiGate management screen. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. Compare desired switch controller settings, switch synchronization indicators, port VLANs, user roles and post-reboot configuration.
  2. The intended VLAN survives a switch restart without unexpected controller overwrite or unauthorized local change.
  3. Check managed tree, ISL link health, model compatibility, VLAN carriage, depth limitations and upstream aggregate status.
  4. Assign FortiSwitch VLANs and ports to the intended FortiGate VDOM with explicit isolation and governed shared infrastructure.
  5. Build a documented supported FortiSwitch daisy chain or multi-tier topology with adequate ISL uplink capacity and safeguards.

Explanation

Correct Answers

C:

Check managed tree, ISL link health, model compatibility, VLAN carriage, depth limitations and upstream aggregate status. A FortiGate controls each FortiSwitch through the managed Layer-2 topology, but downstream reachability depends on upstream FortiLink links. The paired action is: Build a documented supported FortiSwitch daisy chain or multi-tier topology with adequate ISL uplink capacity and safeguards. This is the diagnostic or verification half of the requested TWO-step pair.

E:

Build a documented supported FortiSwitch daisy chain or multi-tier topology with adequate ISL uplink capacity and safeguards. A FortiGate controls each FortiSwitch through the managed Layer-2 topology, but downstream reachability depends on upstream FortiLink links. Verify the action with: Check managed tree, ISL link health, model compatibility, VLAN carriage, depth limitations and upstream aggregate status. This is the configuration or remediation half of the requested TWO-step pair.

Incorrect Answers

A:

Compare desired switch controller settings, switch synchronization indicators, port VLANs, user roles and post-reboot configuration. This step concerns Managed switch configuration synchronization and is not part of the required paired solution. The correct action and evidence are: Build a documented supported FortiSwitch daisy chain or multi-tier topology with adequate ISL uplink capacity and safeguards. Together with: Check managed tree, ISL link health, model compatibility, VLAN carriage, depth limitations and upstream aggregate status.

B:

The intended VLAN survives a switch restart without unexpected controller overwrite or unauthorized local change. This step concerns VLAN configuration persistence and drift control and is not part of the required paired solution. The correct action and evidence are: Build a documented supported FortiSwitch daisy chain or multi-tier topology with adequate ISL uplink capacity and safeguards. Together with: Check managed tree, ISL link health, model compatibility, VLAN carriage, depth limitations and upstream aggregate status.

D:

Assign FortiSwitch VLANs and ports to the intended FortiGate VDOM with explicit isolation and governed shared infrastructure. This step concerns FortiGate VDOM-based FortiSwitch tenant assignment and is not part of the required paired solution. The correct action and evidence are: Build a documented supported FortiSwitch daisy chain or multi-tier topology with adequate ISL uplink capacity and safeguards. Together with: Check managed tree, ISL link health, model compatibility, VLAN carriage, depth limitations and upstream aggregate status.

Question 2

A new managed switch port allows link negotiation but users stay unauthenticated after a RADIUS server change. Which FortiSwitch configuration or corrective action BEST addresses the requirement?

  1. Configure supported switch virtual interfaces and routed gateway addresses with correct VLAN, subnet and management context.
  2. Set model-supported dynamic MAC address learning limits and specific violation action on access-facing switch ports.
  3. Apply authorized device-class rules and dynamic port policies after confirming device detection evidence and fallback outcomes.
  4. Configure supported IEEE 802.1X port security against an approved RADIUS service with explicit guest/unauthorized behavior.

Explanation

Correct Answer

D:

Configure supported IEEE 802.1X port security against an approved RADIUS service with explicit guest/unauthorized behavior. A physical link can be up while 802.1X blocks traffic; the switch is the authenticator, not the authentication server. Verify the action with: Inspect supplicant EAP exchange, RADIUS reachability, shared secret, port policy, authentication result and assigned access profile.

Incorrect Answers

A:

Configure supported switch virtual interfaces and routed gateway addresses with correct VLAN, subnet and management context. This action is relevant to FortiSwitch SVI routing and connected routes, not the controlling requirement in this case. Layer-3 SVI configuration and actual usable forwarding are separate from having a named Layer-2 VLAN. The targeted response is: Configure supported IEEE 802.1X port security against an approved RADIUS service with explicit guest/unauthorized behavior.

B:

Set model-supported dynamic MAC address learning limits and specific violation action on access-facing switch ports. This action is relevant to Port MAC learning-limit and violation controls, not the controlling requirement in this case. Dynamic MAC learning limits reduce accidental fan-out but should be tuned for legitimate multi-device access designs. The targeted response is: Configure supported IEEE 802.1X port security against an approved RADIUS service with explicit guest/unauthorized behavior.

C:

Apply authorized device-class rules and dynamic port policies after confirming device detection evidence and fallback outcomes. This action is relevant to NAC dynamic port policy device classification, not the controlling requirement in this case. NAC assignment relies on reliable detection and a defined precedence; a class label is not a substitute for switch-port policy. The targeted response is: Configure supported IEEE 802.1X port security against an approved RADIUS service with explicit guest/unauthorized behavior.

Question 3

An attacker spoofs an authorized IoT MAC to test whether the switch applies any additional restrictions. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. A rogue root candidate is blocked or a looped path remains safely contained without wiping all STP configuration.
  2. Approved legacy devices gain only restricted services while unknown or spoofed MAC addresses remain constrained.
  3. Port traffic follows the assigned access security requirement without arbitrary drift after controller synchronization.
  4. Isolated clients can reach approved gateways while direct lateral traffic within the VLAN is blocked according to policy.

Explanation

Correct Answer

B:

Approved legacy devices gain only restricted services while unknown or spoofed MAC addresses remain constrained. A MAC address can be cloned; MAC authentication must be combined with appropriate segmentation and monitoring.

Incorrect Answers

A:

A rogue root candidate is blocked or a looped path remains safely contained without wiping all STP configuration. This result relates to Root guard and loop guard failure response, not the acceptance condition under test. The relevant result is: Approved legacy devices gain only restricted services while unknown or spoofed MAC addresses remain constrained.

C:

Port traffic follows the assigned access security requirement without arbitrary drift after controller synchronization. This result relates to FortiSwitch security profile application and precedence, not the acceptance condition under test. The relevant result is: Approved legacy devices gain only restricted services while unknown or spoofed MAC addresses remain constrained.

D:

Isolated clients can reach approved gateways while direct lateral traffic within the VLAN is blocked according to policy. This result relates to Intra-VLAN blocking and isolation boundaries, not the acceptance condition under test. The relevant result is: Approved legacy devices gain only restricted services while unknown or spoofed MAC addresses remain constrained.

Question 4

A voice rollout advertises the new voice VLAN but its DHCP scope is still unreachable from the phone segment. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Check FortiLink parent, VLAN ID, VDOM membership, port assignment, subnet and firewall-policy path.
  2. Inspect supported topology, FortiLink p2p settings, TPID, transport reachability, discovery frames and switch firmware.
  3. Inspect MCLAG peer status, inter-chassis link, negotiated aggregate IDs, VLAN consistency and controller topology.
  4. Review phone tagging capabilities, voice VLAN identifier, LLDP-MED policy, access port configuration and DHCP scopes.

Explanation

Correct Answer

D:

Review phone tagging capabilities, voice VLAN identifier, LLDP-MED policy, access port configuration and DHCP scopes. Voice tagging is not secured merely because its VLAN ID differs from the workstation's native VLAN. The paired action is: Use supported native and voice VLAN policies so phones and downstream workstations receive appropriate separate traffic treatment.

Incorrect Answers

A:

Check FortiLink parent, VLAN ID, VDOM membership, port assignment, subnet and firewall-policy path. These observations are applicable to FortiGate managed FortiSwitch VLAN interface placement, but would not isolate the main failure first. The decisive evidence is: Review phone tagging capabilities, voice VLAN identifier, LLDP-MED policy, access port configuration and DHCP scopes.

B:

Inspect supported topology, FortiLink p2p settings, TPID, transport reachability, discovery frames and switch firmware. These observations are applicable to FortiLink transport over nontrivial L2 or L3 paths, but would not isolate the main failure first. The decisive evidence is: Review phone tagging capabilities, voice VLAN identifier, LLDP-MED policy, access port configuration and DHCP scopes.

C:

Inspect MCLAG peer status, inter-chassis link, negotiated aggregate IDs, VLAN consistency and controller topology. These observations are applicable to MCLAG peer-link topology for managed access switches, but would not isolate the main failure first. The decisive evidence is: Review phone tagging capabilities, voice VLAN identifier, LLDP-MED policy, access port configuration and DHCP scopes.

Question 5

Two aggregation switches have two uplinks to an access device but lack a configured FortiSwitch MCLAG pair. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. Use documented peer-group and downstream trunk configuration for MCLAG rather than creating ad hoc parallel Ethernet links.
  2. Inspect primary/secondary FortiGate roles, HA health, FortiLink uplinks, downstream switch topology and session continuity.
  3. A capable handset reports the expected voice network policy and traffic uses the correct VLAN.
  4. Build a documented supported FortiSwitch daisy chain or multi-tier topology with adequate ISL uplink capacity and safeguards.
  5. Inspect MCLAG peer group, peer-link status, LACP members, VLAN consistency and split-brain safeguards.

Explanation

Correct Answers

A:

Use documented peer-group and downstream trunk configuration for MCLAG rather than creating ad hoc parallel Ethernet links. MCLAG requires peer coordination and correct downstream aggregation; it is not equivalent to connecting independent switches in parallel. Verify the action with: Inspect MCLAG peer group, peer-link status, LACP members, VLAN consistency and split-brain safeguards. This is the configuration or remediation half of the requested TWO-step pair.

E:

Inspect MCLAG peer group, peer-link status, LACP members, VLAN consistency and split-brain safeguards. MCLAG requires peer coordination and correct downstream aggregation; it is not equivalent to connecting independent switches in parallel. The paired action is: Use documented peer-group and downstream trunk configuration for MCLAG rather than creating ad hoc parallel Ethernet links. This is the diagnostic or verification half of the requested TWO-step pair.

Incorrect Answers

B:

Inspect primary/secondary FortiGate roles, HA health, FortiLink uplinks, downstream switch topology and session continuity. This step concerns HA FortiGate pair managing switch topology and is not part of the required paired solution. The correct action and evidence are: Use documented peer-group and downstream trunk configuration for MCLAG rather than creating ad hoc parallel Ethernet links. Together with: Inspect MCLAG peer group, peer-link status, LACP members, VLAN consistency and split-brain safeguards.

C:

A capable handset reports the expected voice network policy and traffic uses the correct VLAN. This step concerns LLDP-MED voice network policy advertisements and is not part of the required paired solution. The correct action and evidence are: Use documented peer-group and downstream trunk configuration for MCLAG rather than creating ad hoc parallel Ethernet links. Together with: Inspect MCLAG peer group, peer-link status, LACP members, VLAN consistency and split-brain safeguards.

D:

Build a documented supported FortiSwitch daisy chain or multi-tier topology with adequate ISL uplink capacity and safeguards. This step concerns FortiSwitch multi-tier managed topology and is not part of the required paired solution. The correct action and evidence are: Use documented peer-group and downstream trunk configuration for MCLAG rather than creating ad hoc parallel Ethernet links. Together with: Inspect MCLAG peer group, peer-link status, LACP members, VLAN consistency and split-brain safeguards.

Question 6

A new replacement is visible in discovery but its ports do not receive policy because it is pending authorization. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. Create an appropriate FortiGate FortiLink physical or logical interface with supported addressing and controller capabilities before onboarding a switch.
  2. Authorize only intended discovered FortiSwitch serial numbers and confirm management mode after the expected transition.
  3. A rogue root candidate is blocked or a looped path remains safely contained without wiping all STP configuration.
  4. Review discovered/authorized controller inventory, switch serial, link state, approval method, reboot status and firmware compatibility.
  5. Compare desired switch controller settings, switch synchronization indicators, port VLANs, user roles and post-reboot configuration.

Explanation

Correct Answers

B:

Authorize only intended discovered FortiSwitch serial numbers and confirm management mode after the expected transition. Switch discovery is not the same as authorization; auto-authorization has governance implications and a managed-mode transition may reboot the device. Verify the action with: Review discovered/authorized controller inventory, switch serial, link state, approval method, reboot status and firmware compatibility. This is the configuration or remediation half of the requested TWO-step pair.

D:

Review discovered/authorized controller inventory, switch serial, link state, approval method, reboot status and firmware compatibility. Switch discovery is not the same as authorization; auto-authorization has governance implications and a managed-mode transition may reboot the device. The paired action is: Authorize only intended discovered FortiSwitch serial numbers and confirm management mode after the expected transition. This is the diagnostic or verification half of the requested TWO-step pair.

Incorrect Answers

A:

Create an appropriate FortiGate FortiLink physical or logical interface with supported addressing and controller capabilities before onboarding a switch. This step concerns FortiLink management interface provisioning and is not part of the required paired solution. The correct action and evidence are: Authorize only intended discovered FortiSwitch serial numbers and confirm management mode after the expected transition. Together with: Review discovered/authorized controller inventory, switch serial, link state, approval method, reboot status and firmware compatibility.

C:

A rogue root candidate is blocked or a looped path remains safely contained without wiping all STP configuration. This step concerns Root guard and loop guard failure response and is not part of the required paired solution. The correct action and evidence are: Authorize only intended discovered FortiSwitch serial numbers and confirm management mode after the expected transition. Together with: Review discovered/authorized controller inventory, switch serial, link state, approval method, reboot status and firmware compatibility.

E:

Compare desired switch controller settings, switch synchronization indicators, port VLANs, user roles and post-reboot configuration. This step concerns Managed switch configuration synchronization and is not part of the required paired solution. The correct action and evidence are: Authorize only intended discovered FortiSwitch serial numbers and confirm management mode after the expected transition. Together with: Review discovered/authorized controller inventory, switch serial, link state, approval method, reboot status and firmware compatibility.

Question 7

A dynamic port-policy rule intended for printers matches all newly connected laptops due to a broad condition. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. The handset and attached workstation use the intended separate networks and retain their authorized access.
  2. Inspect MAC table usage, configured learning limit, learned device count, port-security event and violation action.
  3. Verify that supported CoA or dynamic user security profiles are enforced on authenticated sessions under the deployed topology.
  4. Inspect device fingerprint, policy rule order, assigned VLAN, security profile, client identity and enforcement state.
  5. Apply authorized device-class rules and dynamic port policies after confirming device detection evidence and fallback outcomes.

Explanation

Correct Answers

D:

Inspect device fingerprint, policy rule order, assigned VLAN, security profile, client identity and enforcement state. NAC assignment relies on reliable detection and a defined precedence; a class label is not a substitute for switch-port policy. The paired action is: Apply authorized device-class rules and dynamic port policies after confirming device detection evidence and fallback outcomes. This is the diagnostic or verification half of the requested TWO-step pair.

E:

Apply authorized device-class rules and dynamic port policies after confirming device detection evidence and fallback outcomes. NAC assignment relies on reliable detection and a defined precedence; a class label is not a substitute for switch-port policy. Verify the action with: Inspect device fingerprint, policy rule order, assigned VLAN, security profile, client identity and enforcement state. This is the configuration or remediation half of the requested TWO-step pair.

Incorrect Answers

A:

The handset and attached workstation use the intended separate networks and retain their authorized access. This step concerns Voice and data VLAN separation on shared access ports and is not part of the required paired solution. The correct action and evidence are: Apply authorized device-class rules and dynamic port policies after confirming device detection evidence and fallback outcomes. Together with: Inspect device fingerprint, policy rule order, assigned VLAN, security profile, client identity and enforcement state.

B:

Inspect MAC table usage, configured learning limit, learned device count, port-security event and violation action. This step concerns Port MAC learning-limit and violation controls and is not part of the required paired solution. The correct action and evidence are: Apply authorized device-class rules and dynamic port policies after confirming device detection evidence and fallback outcomes. Together with: Inspect device fingerprint, policy rule order, assigned VLAN, security profile, client identity and enforcement state.

C:

Verify that supported CoA or dynamic user security profiles are enforced on authenticated sessions under the deployed topology. This step concerns RADIUS change of authorization and applied session policy and is not part of the required paired solution. The correct action and evidence are: Apply authorized device-class rules and dynamic port policies after confirming device detection evidence and fallback outcomes. Together with: Inspect device fingerprint, policy rule order, assigned VLAN, security profile, client identity and enforcement state.

Question 8

An unknown device bypasses the intended quarantine profile because a static port policy takes precedence unexpectedly. Which FortiSwitch configuration or corrective action BEST addresses the requirement?

  1. Apply authorized device-class rules and dynamic port policies after confirming device detection evidence and fallback outcomes.
  2. Apply supported switch ACL entries to targeted port or VLAN traffic with documented match, action, and policy sequence.
  3. Correlate LLDP neighbor inventory and VLAN-specific MAC entries to reconstruct actual endpoint and uplink paths.
  4. Verify that supported CoA or dynamic user security profiles are enforced on authenticated sessions under the deployed topology.

Explanation

Correct Answer

A:

Apply authorized device-class rules and dynamic port policies after confirming device detection evidence and fallback outcomes. NAC assignment relies on reliable detection and a defined precedence; a class label is not a substitute for switch-port policy. Verify the action with: Inspect device fingerprint, policy rule order, assigned VLAN, security profile, client identity and enforcement state.

Incorrect Answers

B:

Apply supported switch ACL entries to targeted port or VLAN traffic with documented match, action, and policy sequence. This action is relevant to Static port ACL forwarding decisions, not the controlling requirement in this case. Switch ACLs and FortiGate firewall policies operate at different enforcement points; a deny on one does not prove the other applied. The targeted response is: Apply authorized device-class rules and dynamic port policies after confirming device detection evidence and fallback outcomes.

C:

Correlate LLDP neighbor inventory and VLAN-specific MAC entries to reconstruct actual endpoint and uplink paths. This action is relevant to LLDP and MAC forwarding table extraction, not the controlling requirement in this case. LLDP provides adjacent-device identity, while MAC learning maps forwarding; neither is a full routed trace by itself. The targeted response is: Apply authorized device-class rules and dynamic port policies after confirming device detection evidence and fallback outcomes.

D:

Verify that supported CoA or dynamic user security profiles are enforced on authenticated sessions under the deployed topology. This action is relevant to RADIUS change of authorization and applied session policy, not the controlling requirement in this case. RADIUS authentication success is not proof that a downloadable ACL or CoA update was enforced; some modes have documented conditions. The targeted response is: Apply authorized device-class rules and dynamic port policies after confirming device detection evidence and fallback outcomes.

Question 9

An attacker spoofs an authorized IoT MAC to test whether the switch applies any additional restrictions. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Inspect RADIUS Filter-Id or downloadable ACL attribute, authenticated session state, installed hardware entries and ACL counters.
  2. Check learned client MAC, RADIUS MAC authentication response, access policy, fallback sequence and effective VLAN.
  3. Inspect port profile assignment, FortiGate controller policy, client role, enforcement counters and overlapping static controls.
  4. Inspect customer VLAN tags, service VLAN outer tag, FortiLink parent VDOM, mapping and interface capability.

Explanation

Correct Answer

B:

Check learned client MAC, RADIUS MAC authentication response, access policy, fallback sequence and effective VLAN. A MAC address can be cloned; MAC authentication must be combined with appropriate segmentation and monitoring. The paired action is: Use supported MAC-based access controls with narrow authorized device roles and avoid treating MAC addresses as strong identity proof.

Incorrect Answers

A:

Inspect RADIUS Filter-Id or downloadable ACL attribute, authenticated session state, installed hardware entries and ACL counters. These observations are applicable to DACL RADIUS attribute and per-session enforcement, but would not isolate the main failure first. The decisive evidence is: Check learned client MAC, RADIUS MAC authentication response, access policy, fallback sequence and effective VLAN.

C:

Inspect port profile assignment, FortiGate controller policy, client role, enforcement counters and overlapping static controls. These observations are applicable to FortiSwitch security profile application and precedence, but would not isolate the main failure first. The decisive evidence is: Check learned client MAC, RADIUS MAC authentication response, access policy, fallback sequence and effective VLAN.

D:

Inspect customer VLAN tags, service VLAN outer tag, FortiLink parent VDOM, mapping and interface capability. These observations are applicable to QinQ outer and inner VLAN tenant mapping, but would not isolate the main failure first. The decisive evidence is: Check learned client MAC, RADIUS MAC authentication response, access policy, fallback sequence and effective VLAN.

Question 10

An installer assumes any FortiSwitch port will auto-discover FortiLink despite model-specific discovery defaults. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. Latency-sensitive flows improve under representative load while other business services remain functional.
  2. Runaway flooding is contained without blocking legitimate broadcast-based onboarding or multicast subscribers.
  3. Each intended managed switch appears with valid upstream connectivity and no unintended layer-2 loop.
  4. Hosts can reach their intended SVI and authorized routed destinations without overlapping address space.

Explanation

Correct Answer

C:

Each intended managed switch appears with valid upstream connectivity and no unintended layer-2 loop. The FortiGate-managed FortiSwitch stack is a managed L2 topology, not automatically a single chassis or universal VSF-like control plane.

Incorrect Answers

A:

Latency-sensitive flows improve under representative load while other business services remain functional. This result relates to Egress priority scheduling and congestion visibility, not the acceptance condition under test. The relevant result is: Each intended managed switch appears with valid upstream connectivity and no unintended layer-2 loop.

B:

Runaway flooding is contained without blocking legitimate broadcast-based onboarding or multicast subscribers. This result relates to Storm-control thresholds and broadcast containment, not the acceptance condition under test. The relevant result is: Each intended managed switch appears with valid upstream connectivity and no unintended layer-2 loop.

D:

Hosts can reach their intended SVI and authorized routed destinations without overlapping address space. This result relates to FortiSwitch SVI routing and connected routes, not the acceptance condition under test. The relevant result is: Each intended managed switch appears with valid upstream connectivity and no unintended layer-2 loop.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests