cert
cert-1
cert-2

Pass CompTIA N10-009 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers to Pass the Actual Exam!
30 Days Free Updates, Instant Download!

cert-5
cert-6
N10-009 Exam - Verified By Experts
N10-009 Premium Bundle
$29.98

N10-009 Premium Bundle

$79.99
$109.97
  • Premium File 768 Questions & Answers. Last update: Nov 13, 2026
  • Training Course 240 Video Lectures
  • Study Guide 128 Pages
 
$109.97
$79.99
accept 176 downloads in last 7 days
block-screenshots
Purchase CompTIA N10-009 Exam Training Products Individually
CompTIA N10-009 Premium File
Premium File 768 Q&A
$76.99$69.99
CompTIA N10-009 Video Training Course
Training Course 240 Lectures
$21.99 $19.99
CompTIA N10-009 PDF Study Guide
Study Guide 128 Pages
$21.99 $19.99
CompTIA N10-009 Practice Test 9

Question 80

The original case was: A voice platform must establish call sessions securely across multiple branches. The requirement then changes: The service now needs continuous traffic classification for low-latency voice packets. Which revised action BEST meets this new condition?

  1. Configure secured SIP signaling on the supported TLS transport and validate session setup.
  2. Forward only TCP 1433 and call it secure SIP signaling.
  3. Call traces show successful authenticated setup and proper media negotiation.
  4. Apply appropriate QoS marking and queue prioritization for voice flows.

Explanation

Correct Answer

D:

QoS scheduling targets voice delay and jitter independently of signaling encryption. The revised requirement is: The service now needs continuous traffic classification for low-latency voice packets. The appropriate action is: Apply appropriate QoS marking and queue prioritization for voice flows.

Incorrect Answers

A:

This is the original control. SIP negotiates communication sessions; TLS-protected signaling generally uses 5061. It does not directly satisfy the revised requirement: The service now needs continuous traffic classification for low-latency voice packets.

B:

SQL Server port 1433 does not represent SIP call signaling. It remains inappropriate in the revised context.

C:

Call traces show successful authenticated setup and proper media negotiation. The current requirement is: The service now needs continuous traffic classification for low-latency voice packets.

Question 81

A training application must send one live lecture efficiently to many subscribed receivers on the same routed network. Which action MOST directly meets the stated networking requirement?

  1. Use a supported anycast routing and health design.
  2. Select supported IP multicast distribution with listener membership management.
  3. Validate DHCP requests and replies using UDP 67 and 68 and permitted relay paths.
  4. Send a unicast stream to every host regardless of available multicast support.

Explanation

Correct Answer

B:

Multicast reduces duplicate sender traffic when many subscribers need identical content. This specifically resolves: A training application must send one live lecture efficiently to many subscribed receivers on the same routed network.

Incorrect Answers

A:

This action responds to a later condition: A service must reach the nearest healthy one of several equivalent global endpoints. Anycast directs packets toward a topologically preferred service instance rather than all group members.

C:

This addresses another problem in objective 1.4: New laptops connect to Ethernet but get no IPv4 leases after an access-layer redesign.

D:

Per-client unicast may consume unnecessary repeated bandwidth at large fan-out. The suggested approach is: Send a unicast stream to every host regardless of available multicast support.

Question 82

A training application must send one live lecture efficiently to many subscribed receivers on the same routed network. A colleague instead suggests: Send a unicast stream to every host regardless of available multicast support. Which finding MOST specifically explains why that suggestion is unsuitable?

  1. Per-client unicast may consume unnecessary repeated bandwidth at large fan-out.
  2. Anycast directs packets toward a topologically preferred service instance rather than all group members.
  3. Multicast reduces duplicate sender traffic when many subscribers need identical content.
  4. HTTPS application transport is not the DHCP client-server exchange.

Explanation

Correct Answer

A:

Per-client unicast may consume unnecessary repeated bandwidth at large fan-out. This flaw directly concerns the proposed action: Send a unicast stream to every host regardless of available multicast support.

Incorrect Answers

B:

This rationale belongs to a later changed condition: A service must reach the nearest healthy one of several equivalent global endpoints.

C:

This explains why the recommended control works: Select supported IP multicast distribution with listener membership management.

D:

This flaw concerns a different case in objective 1.4: New laptops connect to Ethernet but get no IPv4 leases after an access-layer redesign. The current rejected proposal is: Send a unicast stream to every host regardless of available multicast support.

Question 83

A training application must send one live lecture efficiently to many subscribed receivers on the same routed network. After applying the solution 'Select supported IP multicast distribution with listener membership management.', which observation MOST directly proves that the requirement was met?

  1. Independent nodes report acceptably small clock offsets against trusted time sources.
  2. Subscribed receivers get one stream while unsubscribed groups do not.
  3. A capture shows DORA negotiation and the client receives the intended scoped lease.
  4. Approval is recorded for 'Select supported IP multicast distribution with listener membership management.' but no operational validation is performed.

Explanation

Correct Answer

B:

Subscribed receivers get one stream while unsubscribed groups do not. It tests the intended outcome because multicast reduces duplicate sender traffic when many subscribers need identical content.

Incorrect Answers

A:

This test addresses a separate problem: Network devices show inconsistent timestamps and fail time-based log correlation.

C:

This observation is for a different condition: New laptops connect to Ethernet but get no IPv4 leases after an access-layer redesign. It does not directly test the target outcome: A training application must send one live lecture efficiently to many subscribed receivers on the same routed network.

D:

Approval alone does not demonstrate operating effectiveness. The missing direct test is: Subscribed receivers get one stream while unsubscribed groups do not.

Question 84

The original case was: A training application must send one live lecture efficiently to many subscribed receivers on the same routed network. The requirement then changes: A service must reach the nearest healthy one of several equivalent global endpoints. Which revised action BEST meets this new condition?

  1. Subscribed receivers get one stream while unsubscribed groups do not.
  2. Use a supported anycast routing and health design.
  3. Select supported IP multicast distribution with listener membership management.
  4. Send a unicast stream to every host regardless of available multicast support.

Explanation

Correct Answer

B:

Anycast directs packets toward a topologically preferred service instance rather than all group members. The revised requirement is: A service must reach the nearest healthy one of several equivalent global endpoints. The appropriate action is: Use a supported anycast routing and health design.

Incorrect Answers

A:

Subscribed receivers get one stream while unsubscribed groups do not. The current requirement is: A service must reach the nearest healthy one of several equivalent global endpoints.

C:

This is the original control. Multicast reduces duplicate sender traffic when many subscribers need identical content. It does not directly satisfy the revised requirement: A service must reach the nearest healthy one of several equivalent global endpoints.

D:

Per-client unicast may consume unnecessary repeated bandwidth at large fan-out. It remains inappropriate in the revised context.

Question 85

A carrier link crosses several kilometers between buildings, beyond the usual reach of multimode optics. Which action MOST directly meets the stated networking requirement?

  1. Connect short-range multimode-only optics to the long-haul single-mode span.
  2. Choose single-mode fiber and compatible long-distance transceivers within optical budget.
  3. Evaluate compatible short-reach multimode optics or direct-attach copper.
  4. Use plenum-rated cable appropriate to the installation and applicable local requirements.

Explanation

Correct Answer

B:

Single-mode fiber supports long-range links when optics and attenuation are appropriate. This specifically resolves: A carrier link crosses several kilometers between buildings, beyond the usual reach of multimode optics.

Incorrect Answers

A:

Mismatched fiber optics and reach specifications can prevent reliable links. The suggested approach is: Connect short-range multimode-only optics to the long-haul single-mode span.

C:

This action responds to a later condition: The link changes to a short rack-to-rack connection in one room. Short distances allow alternative optics or DAC with suitable switch-port capabilities.

D:

This addresses another problem in objective 1.5: New cabling must run through an air-handling ceiling subject to local fire codes.

Question 86

A carrier link crosses several kilometers between buildings, beyond the usual reach of multimode optics. A colleague instead suggests: Connect short-range multimode-only optics to the long-haul single-mode span. Which finding MOST specifically explains why that suggestion is unsuitable?

  1. Single-mode fiber supports long-range links when optics and attenuation are appropriate.
  2. Short distances allow alternative optics or DAC with suitable switch-port capabilities.
  3. Data category alone does not satisfy building fire-safety requirements.
  4. Mismatched fiber optics and reach specifications can prevent reliable links.

Explanation

Correct Answer

D:

Mismatched fiber optics and reach specifications can prevent reliable links. This flaw directly concerns the proposed action: Connect short-range multimode-only optics to the long-haul single-mode span.

Incorrect Answers

A:

This explains why the recommended control works: Choose single-mode fiber and compatible long-distance transceivers within optical budget.

B:

This rationale belongs to a later changed condition: The link changes to a short rack-to-rack connection in one room.

C:

This flaw concerns a different case in objective 1.5: New cabling must run through an air-handling ceiling subject to local fire codes. The current rejected proposal is: Connect short-range multimode-only optics to the long-haul single-mode span.

Question 87

A carrier link crosses several kilometers between buildings, beyond the usual reach of multimode optics. After applying the solution 'Choose single-mode fiber and compatible long-distance transceivers within optical budget.', which observation MOST directly proves that the requirement was met?

  1. The negotiated rate and error counters match the supported DAC link characteristics.
  2. Optical measurements and traffic tests meet expected receive power and error thresholds.
  3. Approval is recorded for 'Choose single-mode fiber and compatible long-distance transceivers within optical budget.' but no operational validation is performed.
  4. Installation inspection confirms required markings and compliant cable routing.

Explanation

Correct Answer

B:

Optical measurements and traffic tests meet expected receive power and error thresholds. It tests the intended outcome because single-mode fiber supports long-range links when optics and attenuation are appropriate.

Incorrect Answers

A:

This test addresses a separate problem: A server and switch share a rack and need a supported 25-gigabit copper interconnect only two meters long.

C:

The missing direct test is: Optical measurements and traffic tests meet expected receive power and error thresholds.

D:

This observation is for a different condition: New cabling must run through an air-handling ceiling subject to local fire codes. It does not directly test the target outcome: A carrier link crosses several kilometers between buildings, beyond the usual reach of multimode optics.

Question 88

The original case was: A carrier link crosses several kilometers between buildings, beyond the usual reach of multimode optics. The requirement then changes: The link changes to a short rack-to-rack connection in one room. Which revised action BEST meets this new condition?

  1. Choose single-mode fiber and compatible long-distance transceivers within optical budget.
  2. Optical measurements and traffic tests meet expected receive power and error thresholds.
  3. Evaluate compatible short-reach multimode optics or direct-attach copper.
  4. Connect short-range multimode-only optics to the long-haul single-mode span.

Explanation

Correct Answer

C:

Short distances allow alternative optics or DAC with suitable switch-port capabilities. The revised requirement is: The link changes to a short rack-to-rack connection in one room. The appropriate action is: Evaluate compatible short-reach multimode optics or direct-attach copper.

Incorrect Answers

A:

This is the original control. Single-mode fiber supports long-range links when optics and attenuation are appropriate. It does not directly satisfy the revised requirement: The link changes to a short rack-to-rack connection in one room.

B:

Optical measurements and traffic tests meet expected receive power and error thresholds. The current requirement is: The link changes to a short rack-to-rack connection in one room.

D:

Mismatched fiber optics and reach specifications can prevent reliable links. It remains inappropriate in the revised context.

Question 89

An access switch needs a 10-gigabit uplink over a short multimode fiber run inside a building. Which action MOST directly meets the stated networking requirement?

  1. Choose compatible 10G short-range optical transceivers and multimode cabling.
  2. Install incompatible long-wavelength modules without checking fiber and port support.
  3. Use a vendor-supported 25G SFP28 direct attach cable meeting host port specifications.
  4. Recalculate distance and deploy compatible single-mode long-reach optics when needed.

Explanation

Correct Answer

A:

Transceiver protocol and fiber type must match link budget and port capability. This specifically resolves: An access switch needs a 10-gigabit uplink over a short multimode fiber run inside a building.

Incorrect Answers

B:

Incompatible modules or wavelengths may prevent the optical link from forming. The suggested approach is: Install incompatible long-wavelength modules without checking fiber and port support.

C:

This addresses another problem in objective 1.5: A server and switch share a rack and need a supported 25-gigabit copper interconnect only two meters long.

D:

This action responds to a later condition: The planned uplink becomes a longer campus backbone link. Longer distances change the optical power and fiber requirements.

Question 90

An access switch needs a 10-gigabit uplink over a short multimode fiber run inside a building. A colleague instead suggests: Install incompatible long-wavelength modules without checking fiber and port support. Which finding MOST specifically explains why that suggestion is unsuitable?

  1. Transceiver protocol and fiber type must match link budget and port capability.
  2. Incompatible modules or wavelengths may prevent the optical link from forming.
  3. Longer distances change the optical power and fiber requirements.
  4. RJ11 wiring and interface specifications do not support a 25G server uplink.

Explanation

Correct Answer

B:

Incompatible modules or wavelengths may prevent the optical link from forming. This flaw directly concerns the proposed action: Install incompatible long-wavelength modules without checking fiber and port support.

Incorrect Answers

A:

This explains why the recommended control works: Choose compatible 10G short-range optical transceivers and multimode cabling.

C:

This rationale belongs to a later changed condition: The planned uplink becomes a longer campus backbone link.

D:

This flaw concerns a different case in objective 1.5: A server and switch share a rack and need a supported 25-gigabit copper interconnect only two meters long. The current rejected proposal is: Install incompatible long-wavelength modules without checking fiber and port support.

CompTIA Network+ (N10-009) Practice Tests