Cisco 500-220 Practice Test 51
Question 500
A Meraki operations team is preparing an evidence-based incident resolution plan. A company wants certificate-based authentication on employee desktops and a controlled method for legacy printers. Which THREE measures together provide the required action, verifying evidence, and acceptable outcome? Select THREE answers.
- Inspect authentication events, RADIUS replies, assigned VLAN and one trusted and untrusted client.
- Configure supported MS port access policies with a reachable RADIUS service and documented noncompliant-device handling.
- Inspect traffic shaping rules, application classification, uplink performance and a sampled client flow.
- Review the admin role assignment, target organization and a read-only test of the relevant page.
- Approved clients authenticate to their policy VLAN; unknown devices follow documented restriction or fallback.
- Review response headers, per-organization request rate and retry behavior in a controlled test.
Explanation
Correct Answers
A:The discriminating evidence is: Inspect authentication events, RADIUS replies, assigned VLAN and one trusted and untrusted client.
B:The targeted next step is: Configure supported MS port access policies with a reachable RADIUS service and documented noncompliant-device handling. The technical reason is: An 802.1X enabled switch port needs the correct supplicant and server exchange, distinct from default VLAN forwarding. A successful verification would use: Inspect authentication events, RADIUS replies, assigned VLAN and one trusted and untrusted client.
E:The acceptance criterion is: Approved clients authenticate to their policy VLAN; unknown devices follow documented restriction or fallback. Verify it using: Inspect authentication events, RADIUS replies, assigned VLAN and one trusted and untrusted client.
Incorrect Answers
C:That evidence is relevant to the distinct Meraki subject of Flow preferences and VPN path selection policy, not the specific MS 802.1X access control and RADIUS requirement.
D:That evidence is relevant to the distinct Meraki subject of Dashboard administrator authentication and least privilege, not the specific MS 802.1X access control and RADIUS requirement.
F:That evidence is relevant to the distinct Meraki subject of Dashboard API organization rate limiting and retry, not the specific MS 802.1X access control and RADIUS requirement.
Question 501
A Cisco Meraki deployment engineer investigates this operational case: An MS reports a RADIUS timeout on multiple ports after a server address change and staff blame cable failures. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.
- Disable all access controls because one unmanaged printer lacks a compatible 802.1X supplicant.
- Use policy-based SD-WAN flow preferences tied to a known application or destination and verify the actual selected uplink.
- Configure supported MS port access policies with a reachable RADIUS service and documented noncompliant-device handling.
- Set a switch access port to the required VLAN and use supported tagged trunk connections for multi-VLAN uplinks.
Explanation
Correct Answer
C:The targeted next step is: Configure supported MS port access policies with a reachable RADIUS service and documented noncompliant-device handling.
Incorrect Answers
A:This is an unsafe shortcut: Disable all access controls because one unmanaged printer lacks a compatible 802.1X supplicant. It does not establish the needed behavior: An 802.1X enabled switch port needs the correct supplicant and server exchange, distinct from default VLAN forwarding. The controlled response is: Configure supported MS port access policies with a reachable RADIUS service and documented noncompliant-device handling.
B:That action is relevant to the distinct Meraki subject of Flow preferences and VPN path selection policy, not the specific MS 802.1X access control and RADIUS requirement.
D:That action is relevant to the distinct Meraki subject of MS access and trunk port VLAN assignment, not the specific MS 802.1X access control and RADIUS requirement.
Question 502
A peer reviewer evaluates the following Meraki case. An MS reports a RADIUS timeout on multiple ports after a server address change and staff blame cable failures. The proposed action is: Configure supported MS port access policies with a reachable RADIUS service and documented noncompliant-device handling. Which technical principle BEST supports this decision? Select ONE best answer.
- A routing-capable MS requires configured L3 interfaces and routes to forward between subnets; VLAN creation is not sufficient.
- Hardware families and firmware trains can have different capabilities; presence of a setting in one network does not guarantee it exists elsewhere.
- Meraki Dashboard distributes management configuration and telemetry while supported devices forward local user traffic using their running configuration.
- An 802.1X enabled switch port needs the correct supplicant and server exchange, distinct from default VLAN forwarding.
Explanation
Correct Answer
D:An 802.1X enabled switch port needs the correct supplicant and server exchange, distinct from default VLAN forwarding. In this situation (An MS reports a RADIUS timeout on multiple ports after a server address change and staff blame cable failures.), it justifies the action: Configure supported MS port access policies with a reachable RADIUS service and documented noncompliant-device handling.
Incorrect Answers
A:That principle is relevant to the distinct Meraki subject of MS switch routing interface and L3 reachability, not the specific MS 802.1X access control and RADIUS requirement. For this scenario, the proper response is: Configure supported MS port access policies with a reachable RADIUS service and documented noncompliant-device handling. Verify it through: Inspect authentication events, RADIUS replies, assigned VLAN and one trusted and untrusted client.
B:That principle is relevant to the distinct Meraki subject of Firmware version differences and configuration feature support, not the specific MS 802.1X access control and RADIUS requirement.
C:That principle is relevant to the distinct Meraki subject of Dashboard cloud control plane versus local packet forwarding, not the specific MS 802.1X access control and RADIUS requirement.
Question 503
A Meraki support engineer must distinguish facts from assumptions. An MS reports a RADIUS timeout on multiple ports after a server address change and staff blame cable failures. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.
- Review port classification, DSCP markings, counters and an actual call under controlled congestion.
- Inspect client MAC or identifier, association times, event severity and a reproducible application failure.
- Inspect authentication events, RADIUS replies, assigned VLAN and one trusted and untrusted client.
- Compare spectrum survey, channel overlap, expected client count, airtime use and retries at peak occupancy.
Explanation
Correct Answer
C:The discriminating evidence is: Inspect authentication events, RADIUS replies, assigned VLAN and one trusted and untrusted client. Expected result: Approved clients authenticate to their policy VLAN; unknown devices follow documented restriction or fallback.
Incorrect Answers
A:That evidence is relevant to the distinct Meraki subject of MS QoS trust and voice traffic classification, not the specific MS 802.1X access control and RADIUS requirement.
B:That evidence is relevant to the distinct Meraki subject of Dashboard client timeline and event filtering, not the specific MS 802.1X access control and RADIUS requirement.
D:That evidence is relevant to the distinct Meraki subject of High-density RF channel and AP count planning, not the specific MS 802.1X access control and RADIUS requirement.
Question 504
An implementation lead needs a measurable acceptance criterion for a Meraki change. An MS reports a RADIUS timeout on multiple ports after a server address change and staff blame cable failures. The proposed validation is: Inspect authentication events, RADIUS replies, assigned VLAN and one trusted and untrusted client. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.
- Two authorized VLANs communicate through the intended L3 boundary while others stay isolated.
- Approved clients authenticate to their policy VLAN; unknown devices follow documented restriction or fallback.
- The branch reaches approved hub-hosted applications while unnecessary inter-spoke tunnels are absent.
- The correct branch-to-hub VPN route and security path are both confirmed without restarting unrelated peers.
Explanation
Correct Answer
B:The acceptance criterion is: Approved clients authenticate to their policy VLAN; unknown devices follow documented restriction or fallback.
Incorrect Answers
A:That outcome is relevant to the distinct Meraki subject of MS switch routing interface and L3 reachability, not the specific MS 802.1X access control and RADIUS requirement. For this scenario, the proper response is: Configure supported MS port access policies with a reachable RADIUS service and documented noncompliant-device handling. Verify it through: Inspect authentication events, RADIUS replies, assigned VLAN and one trusted and untrusted client.
C:That outcome is relevant to the distinct Meraki subject of Auto VPN hub-and-spoke site reachability, not the specific MS 802.1X access control and RADIUS requirement.
D:That outcome is relevant to the distinct Meraki subject of Auto VPN peer tunnel health and route advertisement, not the specific MS 802.1X access control and RADIUS requirement.
Question 505
A Meraki operations reviewer examines this case. An MS reports a RADIUS timeout on multiple ports after a server address change and staff blame cable failures. Which assumption is the MOST DIRECTLY relevant unsafe or technically wrong shortcut to reject here? Select ONE best answer.
- Disable all access controls because one unmanaged printer lacks a compatible 802.1X supplicant.
- Treat an online green Dashboard icon as proof every ACL, DHCP scope and application path works end to end.
- Claim a large unverified serial list into the production organization without matching the purchase order.
- Clone an uplink trunk to every end-user access port without confirming their role.
Explanation
Correct Answer
A:It conflicts with the relevant behavior: An 802.1X enabled switch port needs the correct supplicant and server exchange, distinct from default VLAN forwarding.
Incorrect Answers
B:That proposal is unsafe in its own context (the separate topic of Deployment validation and change evidence), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns MS 802.1X access control and RADIUS: Disable all access controls because one unmanaged printer lacks a compatible 802.1X supplicant.
C:That proposal is unsafe in its own context (the separate topic of Bulk device claim and zero-touch staging), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns MS 802.1X access control and RADIUS: Disable all access controls because one unmanaged printer lacks a compatible 802.1X supplicant.
D:That proposal is unsafe in its own context (the separate topic of MS configuration templates and switch port cloning), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns MS 802.1X access control and RADIUS: Disable all access controls because one unmanaged printer lacks a compatible 802.1X supplicant.
Question 506
A Cisco Meraki deployment engineer investigates this operational case: A retailer deploys twenty equivalent barcode readers and wants to copy a proven PoE and VLAN profile. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.
- Replicate known-good supported switch port settings from a verified source without duplicating site-specific mistakes.
- Verify both forward and return paths between Auto VPN sites and cloud workloads rather than checking only IKE state.
- Use policy-based SD-WAN flow preferences tied to a known application or destination and verify the actual selected uplink.
- Configure supported MS port access policies with a reachable RADIUS service and documented noncompliant-device handling.
Explanation
Correct Answer
A:The targeted next step is: Replicate known-good supported switch port settings from a verified source without duplicating site-specific mistakes. The technical reason is: Port configuration cloning can accelerate standardized deployments, but VLAN, uplink and security context must still be validated.
Incorrect Answers
B:That action is relevant to the distinct Meraki subject of vMX traffic symmetry and cloud return routing, not the specific MS configuration templates and switch port cloning requirement.
C:That action is relevant to the distinct Meraki subject of Flow preferences and VPN path selection policy, not the specific MS configuration templates and switch port cloning requirement.
D:That action is relevant to the distinct Meraki subject of MS 802.1X access control and RADIUS, not the specific MS configuration templates and switch port cloning requirement.
Question 507
A peer reviewer evaluates the following Meraki case. A retailer deploys twenty equivalent barcode readers and wants to copy a proven PoE and VLAN profile. The proposed action is: Replicate known-good supported switch port settings from a verified source without duplicating site-specific mistakes. Which technical principle BEST supports this decision? Select ONE best answer.
- Port configuration cloning can accelerate standardized deployments, but VLAN, uplink and security context must still be validated.
- An 802.1X enabled switch port needs the correct supplicant and server exchange, distinct from default VLAN forwarding.
- Paginated API endpoints can return only a subset of the device list; an initial successful response is not proof all items are included.
- Thresholds need context from application behavior and normal variation; a too-sensitive threshold creates unhelpful alerts.
Explanation
Correct Answer
A:Port configuration cloning can accelerate standardized deployments, but VLAN, uplink and security context must still be validated. In this situation (A retailer deploys twenty equivalent barcode readers and wants to copy a proven PoE and VLAN profile.), it justifies the action: Replicate known-good supported switch port settings from a verified source without duplicating site-specific mistakes.
Incorrect Answers
B:That principle is relevant to the distinct Meraki subject of MS 802.1X access control and RADIUS, not the specific MS configuration templates and switch port cloning requirement.
C:That principle is relevant to the distinct Meraki subject of API pagination and complete inventory reconciliation, not the specific MS configuration templates and switch port cloning requirement.
D:That principle is relevant to the distinct Meraki subject of Meraki Insight application threshold and alert tuning, not the specific MS configuration templates and switch port cloning requirement.
Question 508
A Meraki support engineer must distinguish facts from assumptions. A retailer deploys twenty equivalent barcode readers and wants to copy a proven PoE and VLAN profile. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.
- Compare source and destination port roles, VLANs, PoE, labels and actual endpoint connectivity.
- Review port classification, DSCP markings, counters and an actual call under controlled congestion.
- Compare selected organization, networks, time period, report recipients and raw Dashboard activity for a known date.
- Inspect returned Link next-page information, accumulated serial IDs and a Dashboard inventory comparison.
Explanation
Correct Answer
A:The discriminating evidence is: Compare source and destination port roles, VLANs, PoE, labels and actual endpoint connectivity. Expected result: New access ports match the approved role while exceptional trunk and security settings remain correct.
Incorrect Answers
B:That evidence is relevant to the distinct Meraki subject of MS QoS trust and voice traffic classification, not the specific MS configuration templates and switch port cloning requirement.
C:That evidence is relevant to the distinct Meraki subject of Scheduled dashboard reports and audit interpretation, not the specific MS configuration templates and switch port cloning requirement.
D:That evidence is relevant to the distinct Meraki subject of API pagination and complete inventory reconciliation, not the specific MS configuration templates and switch port cloning requirement.
Question 509
An implementation lead needs a measurable acceptance criterion for a Meraki change. A retailer deploys twenty equivalent barcode readers and wants to copy a proven PoE and VLAN profile. The proposed validation is: Compare source and destination port roles, VLANs, PoE, labels and actual endpoint connectivity. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.
- New access ports match the approved role while exceptional trunk and security settings remain correct.
- Authorized clients obtain nonoverlapping addresses and reach their designated gateway and permitted resources.
- The field technician reports a specific management connectivity defect without unnecessarily resetting healthy equipment.
- Two authorized VLANs communicate through the intended L3 boundary while others stay isolated.
Explanation
Correct Answer
A:The acceptance criterion is: New access ports match the approved role while exceptional trunk and security settings remain correct. Verify it using: Compare source and destination port roles, VLANs, PoE, labels and actual endpoint connectivity. The associated corrective action is: Replicate known-good supported switch port settings from a verified source without duplicating site-specific mistakes.
Incorrect Answers
B:That outcome is relevant to the distinct Meraki subject of MX VLAN interfaces and DHCP configuration, not the specific MS configuration templates and switch port cloning requirement.
C:That outcome is relevant to the distinct Meraki subject of Device local status page during cloud management loss, not the specific MS configuration templates and switch port cloning requirement.
D:That outcome is relevant to the distinct Meraki subject of MS switch routing interface and L3 reachability, not the specific MS configuration templates and switch port cloning requirement.
Question 510
A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. A retailer deploys twenty equivalent barcode readers and wants to copy a proven PoE and VLAN profile. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.
- Compare source and destination port roles, VLANs, PoE, labels and actual endpoint connectivity.
- Plan video retention against model capabilities, recording mode and compliance requirements before changing settings.
- Replicate known-good supported switch port settings from a verified source without duplicating site-specific mistakes.
- Review response headers, per-organization request rate and retry behavior in a controlled test.
- Compare firmware targets, pilot client association, retries, roaming and change-window results.
Explanation
Correct Answers
A:The discriminating evidence is: Compare source and destination port roles, VLANs, PoE, labels and actual endpoint connectivity.
C:The targeted next step is: Replicate known-good supported switch port settings from a verified source without duplicating site-specific mistakes. The technical reason is: Port configuration cloning can accelerate standardized deployments, but VLAN, uplink and security context must still be validated. A successful verification would use: Compare source and destination port roles, VLANs, PoE, labels and actual endpoint connectivity.
Incorrect Answers
B:That action is relevant to the distinct Meraki subject of MV camera retention and storage planning, not the specific MS configuration templates and switch port cloning requirement.
D:That evidence is relevant to the distinct Meraki subject of Dashboard API organization rate limiting and retry, not the specific MS configuration templates and switch port cloning requirement.
E:That evidence is relevant to the distinct Meraki subject of Staged MR firmware rollout and client compatibility, not the specific MS configuration templates and switch port cloning requirement.