cert
cert-1
cert-2

Pass Cisco 500-220 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers to Pass the Actual Exam!
30 Days Free Updates, Instant Download!

cert-5
cert-6
500-220 Exam - Verified By Experts
500-220 Premium File

500-220 Premium File

$69.99
$76.99
  • Premium File 85 Questions & Answers. Last Update: Nov 13, 2026

Whats Included:

  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
 
$76.99
$69.99
accept 13 downloads in the last 7 days
block-screenshots
Cisco 500-220 Practice Test 52

Question 510

A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. A retailer deploys twenty equivalent barcode readers and wants to copy a proven PoE and VLAN profile. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.

  1. Compare source and destination port roles, VLANs, PoE, labels and actual endpoint connectivity.
  2. Plan video retention against model capabilities, recording mode and compliance requirements before changing settings.
  3. Replicate known-good supported switch port settings from a verified source without duplicating site-specific mistakes.
  4. Review response headers, per-organization request rate and retry behavior in a controlled test.
  5. Compare firmware targets, pilot client association, retries, roaming and change-window results.

Explanation

Correct Answers

A:

The discriminating evidence is: Compare source and destination port roles, VLANs, PoE, labels and actual endpoint connectivity.

C:

The targeted next step is: Replicate known-good supported switch port settings from a verified source without duplicating site-specific mistakes. The technical reason is: Port configuration cloning can accelerate standardized deployments, but VLAN, uplink and security context must still be validated. A successful verification would use: Compare source and destination port roles, VLANs, PoE, labels and actual endpoint connectivity.

Incorrect Answers

B:

That action is relevant to the distinct Meraki subject of MV camera retention and storage planning, not the specific MS configuration templates and switch port cloning requirement.

D:

That evidence is relevant to the distinct Meraki subject of Dashboard API organization rate limiting and retry, not the specific MS configuration templates and switch port cloning requirement.

E:

That evidence is relevant to the distinct Meraki subject of Staged MR firmware rollout and client compatibility, not the specific MS configuration templates and switch port cloning requirement.

Question 511

A Cisco Meraki deployment engineer investigates this operational case: A switch replacement copies a port template from a voice port to an uplink and accidentally removes tagged VLANs. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.

  1. Identify the organization's active licensing model before explaining renewal, expiry behavior or license migration.
  2. Verify static-route next hops and subnet specificity before selecting them as a substitute for dynamic routing.
  3. Create and validate supported MS L3 interfaces for a routed distribution role rather than relying on Layer-2 MAC learning.
  4. Replicate known-good supported switch port settings from a verified source without duplicating site-specific mistakes.

Explanation

Correct Answer

D:

The targeted next step is: Replicate known-good supported switch port settings from a verified source without duplicating site-specific mistakes.

Incorrect Answers

A:

That action is relevant to the distinct Meraki subject of Meraki subscription licensing versus historical per-device licensing, not the specific MS configuration templates and switch port cloning requirement.

B:

That action is relevant to the distinct Meraki subject of Static route next hop and VPN route preference, not the specific MS configuration templates and switch port cloning requirement.

C:

That action is relevant to the distinct Meraki subject of MS switch routing interface and L3 reachability, not the specific MS configuration templates and switch port cloning requirement.

Question 512

A peer reviewer evaluates the following Meraki case. A switch replacement copies a port template from a voice port to an uplink and accidentally removes tagged VLANs. The proposed action is: Replicate known-good supported switch port settings from a verified source without duplicating site-specific mistakes. Which technical principle BEST supports this decision? Select ONE best answer.

  1. QoS classification and queue scheduling matter only at contention points, and policy must be consistent along the path.
  2. Subscription, co-term and legacy per-device models have distinct compliance behavior, and one Dashboard organization does not mix these models.
  3. A static route pointing to an unreachable next hop cannot repair a missing layer-2 or layer-3 path; prefix selection determines eligible matches.
  4. Port configuration cloning can accelerate standardized deployments, but VLAN, uplink and security context must still be validated.

Explanation

Correct Answer

D:

Port configuration cloning can accelerate standardized deployments, but VLAN, uplink and security context must still be validated. In this situation (A switch replacement copies a port template from a voice port to an uplink and accidentally removes tagged VLANs.), it justifies the action: Replicate known-good supported switch port settings from a verified source without duplicating site-specific mistakes.

Incorrect Answers

A:

That principle is relevant to the distinct Meraki subject of MS QoS trust and voice traffic classification, not the specific MS configuration templates and switch port cloning requirement.

B:

That principle is relevant to the distinct Meraki subject of Meraki subscription licensing versus historical per-device licensing, not the specific MS configuration templates and switch port cloning requirement.

C:

That principle is relevant to the distinct Meraki subject of Static route next hop and VPN route preference, not the specific MS configuration templates and switch port cloning requirement.

Question 513

A Meraki support engineer must distinguish facts from assumptions. A switch replacement copies a port template from a voice port to an uplink and accidentally removes tagged VLANs. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.

  1. Compare source and destination port roles, VLANs, PoE, labels and actual endpoint connectivity.
  2. Compare spectrum survey, channel overlap, expected client count, airtime use and retries at peak occupancy.
  3. Inspect authentication events, RADIUS replies, assigned VLAN and one trusted and untrusted client.
  4. Review app assignment, affected device tags, installation report and a reference endpoint test.

Explanation

Correct Answer

A:

Applied to the described situation (A switch replacement copies a port template from a voice port to an uplink and accidentally removes tagged VLANs.), it should establish: New access ports match the approved role while exceptional trunk and security settings remain correct.

Incorrect Answers

B:

That evidence is relevant to the distinct Meraki subject of High-density RF channel and AP count planning, not the specific MS configuration templates and switch port cloning requirement.

C:

That evidence is relevant to the distinct Meraki subject of MS 802.1X access control and RADIUS, not the specific MS configuration templates and switch port cloning requirement.

D:

That evidence is relevant to the distinct Meraki subject of Systems Manager application deployment and tag scope, not the specific MS configuration templates and switch port cloning requirement.

Question 514

An implementation lead needs a measurable acceptance criterion for a Meraki change. A switch replacement copies a port template from a voice port to an uplink and accidentally removes tagged VLANs. The proposed validation is: Compare source and destination port roles, VLANs, PoE, labels and actual endpoint connectivity. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.

  1. Valid clients authenticate and reach expected resources without weakening security to solve an identity issue.
  2. Approved clients authenticate to their policy VLAN; unknown devices follow documented restriction or fallback.
  3. New access ports match the approved role while exceptional trunk and security settings remain correct.
  4. The staged units appear in the intended network and receive only the approved local configuration after check-in.

Explanation

Correct Answer

C:

The acceptance criterion is: New access ports match the approved role while exceptional trunk and security settings remain correct. Verify it using: Compare source and destination port roles, VLANs, PoE, labels and actual endpoint connectivity.

Incorrect Answers

A:

That outcome is relevant to the distinct Meraki subject of MR authentication and RADIUS reject troubleshooting, not the specific MS configuration templates and switch port cloning requirement.

B:

That outcome is relevant to the distinct Meraki subject of MS 802.1X access control and RADIUS, not the specific MS configuration templates and switch port cloning requirement.

D:

That outcome is relevant to the distinct Meraki subject of Bulk device claim and zero-touch staging, not the specific MS configuration templates and switch port cloning requirement.

Question 515

A Meraki operations reviewer examines this case. A switch replacement copies a port template from a voice port to an uplink and accidentally removes tagged VLANs. Which assumption is the MOST DIRECTLY relevant unsafe or technically wrong shortcut to reject here? Select ONE best answer.

  1. Declare an application healthy solely because its MX is marked online in the cloud dashboard.
  2. Set an SSID limit to a higher figure and assume it increases the ISP's purchased service rate.
  3. Clone an uplink trunk to every end-user access port without confirming their role.
  4. Disable all access controls because one unmanaged printer lacks a compatible 802.1X supplicant.

Explanation

Correct Answer

C:

It conflicts with the relevant behavior: Port configuration cloning can accelerate standardized deployments, but VLAN, uplink and security context must still be validated.

Incorrect Answers

A:

That proposal is unsafe in its own context (the separate topic of Meraki Insight application health and WAN visibility), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns MS configuration templates and switch port cloning: Clone an uplink trunk to every end-user access port without confirming their role.

B:

That proposal is unsafe in its own context (the separate topic of MR SSID traffic shaping for application bandwidth), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns MS configuration templates and switch port cloning: Clone an uplink trunk to every end-user access port without confirming their role.

D:

That proposal is unsafe in its own context (the separate topic of MS 802.1X access control and RADIUS), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns MS configuration templates and switch port cloning: Clone an uplink trunk to every end-user access port without confirming their role.

Question 516

A Cisco Meraki deployment engineer investigates this operational case: A university shifts from a shared wireless password to individual corporate credentials and certificate validation. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.

  1. Use matched threat events and source context to decide whether a security block or false positive is causing the application outage.
  2. Set a switch access port to the required VLAN and use supported tagged trunk connections for multi-VLAN uplinks.
  3. Configure an enterprise SSID with the intended RADIUS identity, compatible WPA mode and VLAN assignment.
  4. Configure appropriate wireless per-client or application traffic controls and validate real rates under load.

Explanation

Correct Answer

C:

Configure an enterprise SSID with the intended RADIUS identity, compatible WPA mode and VLAN assignment. The technical reason is: Enterprise wireless authentication must validate clients against an approved backend before protected application access. A successful verification would use: Check SSID security, RADIUS events, successful EAP exchange and the associated client VLAN.

Incorrect Answers

A:

That action is relevant to the distinct Meraki subject of Security Center threat event investigation and false positive, not the specific MR corporate SSID with WPA enterprise authentication requirement.

B:

That action is relevant to the distinct Meraki subject of MS access and trunk port VLAN assignment, not the specific MR corporate SSID with WPA enterprise authentication requirement.

D:

That action is relevant to the distinct Meraki subject of MR SSID traffic shaping for application bandwidth, not the specific MR corporate SSID with WPA enterprise authentication requirement. For this scenario, the proper response is: Configure an enterprise SSID with the intended RADIUS identity, compatible WPA mode and VLAN assignment.

Question 517

A peer reviewer evaluates the following Meraki case. A university shifts from a shared wireless password to individual corporate credentials and certificate validation. The proposed action is: Configure an enterprise SSID with the intended RADIUS identity, compatible WPA mode and VLAN assignment. Which technical principle BEST supports this decision? Select ONE best answer.

  1. 802.1X depends on an authenticator, supplicant and authentication server; successful physical association alone is not authorization.
  2. Rogue or interfering AP observations require classification; an external neighboring AP is not automatically malicious corporate infrastructure.
  3. Enterprise wireless authentication must validate clients against an approved backend before protected application access.
  4. Uplink traffic volume and path-quality indicators are different metrics; high utilization alone does not prove packet loss.

Explanation

Correct Answer

C:

Enterprise wireless authentication must validate clients against an approved backend before protected application access. In this situation (A university shifts from a shared wireless password to individual corporate credentials and certificate validation.), it justifies the action: Configure an enterprise SSID with the intended RADIUS identity, compatible WPA mode and VLAN assignment.

Incorrect Answers

A:

Verify it through: Check SSID security, RADIUS events, successful EAP exchange and the associated client VLAN.

B:

That principle is relevant to the distinct Meraki subject of MR Air Marshal threat and rogue SSID monitoring, not the specific MR corporate SSID with WPA enterprise authentication requirement. For this scenario, the proper response is: Configure an enterprise SSID with the intended RADIUS identity, compatible WPA mode and VLAN assignment.

D:

That principle is relevant to the distinct Meraki subject of WAN uplink performance graphs and loss baselines, not the specific MR corporate SSID with WPA enterprise authentication requirement.

Question 518

A Meraki support engineer must distinguish facts from assumptions. A university shifts from a shared wireless password to individual corporate credentials and certificate validation. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.

  1. Review AP channel plan, utilization, retry rates and client roaming before and after a pilot change.
  2. Compare selected organization, networks, time period, report recipients and raw Dashboard activity for a known date.
  3. Check SSID security, RADIUS events, successful EAP exchange and the associated client VLAN.
  4. Inspect traffic shaping rules, application classification, uplink performance and a sampled client flow.

Explanation

Correct Answer

C:

The discriminating evidence is: Check SSID security, RADIUS events, successful EAP exchange and the associated client VLAN. Expected result: Authorized managed clients connect with correct identity and network rights; unauthorized clients do not.

Incorrect Answers

A:

That evidence is relevant to the distinct Meraki subject of MR RF profiles and channel width optimization, not the specific MR corporate SSID with WPA enterprise authentication requirement.

B:

That evidence is relevant to the distinct Meraki subject of Scheduled dashboard reports and audit interpretation, not the specific MR corporate SSID with WPA enterprise authentication requirement.

D:

That evidence is relevant to the distinct Meraki subject of Flow preferences and VPN path selection policy, not the specific MR corporate SSID with WPA enterprise authentication requirement.

Question 519

An implementation lead needs a measurable acceptance criterion for a Meraki change. A university shifts from a shared wireless password to individual corporate credentials and certificate validation. The proposed validation is: Check SSID security, RADIUS events, successful EAP exchange and the associated client VLAN. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.

  1. Authorized managed clients connect with correct identity and network rights; unauthorized clients do not.
  2. The staged units appear in the intended network and receive only the approved local configuration after check-in.
  3. A visitor completes authorized onboarding and browses externally while protected business networks remain unreachable.
  4. Visitors obtain usable Internet access but cannot reach staff servers or other blocked networks.

Explanation

Correct Answer

A:

The acceptance criterion is: Authorized managed clients connect with correct identity and network rights; unauthorized clients do not. Verify it using: Check SSID security, RADIUS events, successful EAP exchange and the associated client VLAN. The associated corrective action is: Configure an enterprise SSID with the intended RADIUS identity, compatible WPA mode and VLAN assignment.

Incorrect Answers

B:

That outcome is relevant to the distinct Meraki subject of Bulk device claim and zero-touch staging, not the specific MR corporate SSID with WPA enterprise authentication requirement.

C:

That outcome is relevant to the distinct Meraki subject of Guest Wi-Fi captive portal and traffic isolation, not the specific MR corporate SSID with WPA enterprise authentication requirement.

D:

That outcome is relevant to the distinct Meraki subject of MR guest SSID splash and isolation settings, not the specific MR corporate SSID with WPA enterprise authentication requirement.

Question 520

A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. A university shifts from a shared wireless password to individual corporate credentials and certificate validation. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.

  1. Configure an enterprise SSID with the intended RADIUS identity, compatible WPA mode and VLAN assignment.
  2. Review warm-spare status, monitoring, cabling topology and controlled failure events before calling the design redundant.
  3. Check SSID security, RADIUS events, successful EAP exchange and the associated client VLAN.
  4. Compare Dashboard uplink loss/latency/jitter history with approved class thresholds and the application SLA.
  5. Compare remote VPN route tables, local VLAN VPN participation and site address inventory.

Explanation

Correct Answers

A:

The targeted next step is: Configure an enterprise SSID with the intended RADIUS identity, compatible WPA mode and VLAN assignment. The technical reason is: Enterprise wireless authentication must validate clients against an approved backend before protected application access.

C:

The discriminating evidence is: Check SSID security, RADIUS events, successful EAP exchange and the associated client VLAN.

Incorrect Answers

B:

That evidence is relevant to the distinct Meraki subject of MX high availability warm spare and uplink failover, not the specific MR corporate SSID with WPA enterprise authentication requirement.

D:

That evidence is relevant to the distinct Meraki subject of Performance-class loss latency and jitter thresholds, not the specific MR corporate SSID with WPA enterprise authentication requirement.

E:

That evidence is relevant to the distinct Meraki subject of Auto VPN subnet advertisement and overlap, not the specific MR corporate SSID with WPA enterprise authentication requirement.

Cisco Meraki Solutions Specialist (500-220) Practice Tests