cert
cert-1
cert-2

Pass Cisco 500-220 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers to Pass the Actual Exam!
30 Days Free Updates, Instant Download!

cert-5
cert-6
500-220 Exam - Verified By Experts
500-220 Premium File

500-220 Premium File

$69.99
$76.99
  • Premium File 85 Questions & Answers. Last Update: Nov 13, 2026

Whats Included:

  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
 
$76.99
$69.99
accept 13 downloads in the last 7 days
block-screenshots
Cisco 500-220 Practice Test 43

Question 420

A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. A branch MX directly connects 10.1.0.0/24, while 10.3.0.0/24 sits behind an MS L3 switch and is unreachable. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.

  1. Add a specific supported static route through a reachable LAN-side router after verifying the downstream subnet.
  2. Compare a pilot's device online status, gateway route, VLAN reachability and a change log with rollback plan.
  3. Compare old and replacement serial numbers, inventory state, Dashboard license status and authorized vendor RMA documentation.
  4. Check the MX route list, downstream interface addressing and forward/return reachability to a test endpoint.
  5. Compare Dashboard online status, management DNS reachability and a same-VLAN client test during the same interval.

Explanation

Correct Answers

A:

The targeted next step is: Add a specific supported static route through a reachable LAN-side router after verifying the downstream subnet. The technical reason is: Static routes require valid destinations and next hops; a firewall allow rule alone cannot repair absent routing. A successful verification would use: Check the MX route list, downstream interface addressing and forward/return reachability to a test endpoint.

D:

The discriminating evidence is: Check the MX route list, downstream interface addressing and forward/return reachability to a test endpoint.

Incorrect Answers

B:

That evidence is relevant to the distinct Meraki subject of Deployment validation and change evidence, not the specific MX static routes to downstream layer three network requirement.

C:

That evidence is relevant to the distinct Meraki subject of Licensing entitlement after hardware replacement, not the specific MX static routes to downstream layer three network requirement.

E:

That evidence is relevant to the distinct Meraki subject of Dashboard cloud control plane versus local packet forwarding, not the specific MX static routes to downstream layer three network requirement.

Question 421

A Cisco Meraki deployment engineer investigates this operational case: An engineer points a static route toward a gateway IP that is not on any reachable MX interface. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.

  1. Define a guest-authorization and isolation path that supports Internet access without access to staff LAN services.
  2. Add a specific supported static route through a reachable LAN-side router after verifying the downstream subnet.
  3. Choose appropriate RF profiles and channel-width settings based on survey and client radio capabilities.
  4. Configure application-specific traffic shaping and flow preference using observed WAN behavior and a limited change plan.

Explanation

Correct Answer

B:

The targeted next step is: Add a specific supported static route through a reachable LAN-side router after verifying the downstream subnet.

Incorrect Answers

A:

That action is relevant to the distinct Meraki subject of Guest Wi-Fi captive portal and traffic isolation, not the specific MX static routes to downstream layer three network requirement.

C:

That action is relevant to the distinct Meraki subject of MR RF profile and band planning across device generations, not the specific MX static routes to downstream layer three network requirement.

D:

That action is relevant to the distinct Meraki subject of MX SD-WAN traffic preferences and shaping, not the specific MX static routes to downstream layer three network requirement.

Question 422

A peer reviewer evaluates the following Meraki case. An engineer points a static route toward a gateway IP that is not on any reachable MX interface. The proposed action is: Add a specific supported static route through a reachable LAN-side router after verifying the downstream subnet. Which technical principle BEST supports this decision? Select ONE best answer.

  1. Static routes require valid destinations and next hops; a firewall allow rule alone cannot repair absent routing.
  2. SSID shaping manages matching client traffic but does not create extra RF airtime or remove upstream ISP bottlenecks.
  3. L3/L7 firewall and threat inspection may block different stages of a session; port reachability does not guarantee application permission.
  4. A hub order and reachable advertised routes affect the spoke's selected path and resilience when a hub fails.

Explanation

Correct Answer

A:

Static routes require valid destinations and next hops; a firewall allow rule alone cannot repair absent routing. In this situation (An engineer points a static route toward a gateway IP that is not on any reachable MX interface.), it justifies the action: Add a specific supported static route through a reachable LAN-side router after verifying the downstream subnet.

Incorrect Answers

B:

That principle is relevant to the distinct Meraki subject of MR SSID traffic shaping for application bandwidth, not the specific MX static routes to downstream layer three network requirement.

C:

That principle is relevant to the distinct Meraki subject of MX layer three and layer seven security filtering, not the specific MX static routes to downstream layer three network requirement.

D:

That principle is relevant to the distinct Meraki subject of Multi-hub Auto VPN resiliency and routing preference, not the specific MX static routes to downstream layer three network requirement.

Question 423

A Meraki support engineer must distinguish facts from assumptions. An engineer points a static route toward a gateway IP that is not on any reachable MX interface. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.

  1. Check the MX route list, downstream interface addressing and forward/return reachability to a test endpoint.
  2. Verify DHCP server identity, snooping trust, STP status and a test rogue server scenario where supported.
  3. Compare configured VLAN ID, interface address, DHCP scope and one client's lease and gateway reachability.
  4. Inventory required site-to-site flows and evaluate peer topology against supported appliance scale.

Explanation

Correct Answer

A:

Applied to the described situation (An engineer points a static route toward a gateway IP that is not on any reachable MX interface.), it should establish: The remote internal subnet becomes reachable through the correct next hop without diverting unrelated traffic.

Incorrect Answers

B:

That evidence is relevant to the distinct Meraki subject of Layer two protections and unauthorized DHCP sources, not the specific MX static routes to downstream layer three network requirement.

C:

That evidence is relevant to the distinct Meraki subject of MX VLAN interfaces and DHCP configuration, not the specific MX static routes to downstream layer three network requirement.

D:

That evidence is relevant to the distinct Meraki subject of Mesh Auto VPN scaling and required lateral paths, not the specific MX static routes to downstream layer three network requirement.

Question 424

An implementation lead needs a measurable acceptance criterion for a Meraki change. An engineer points a static route toward a gateway IP that is not on any reachable MX interface. The proposed validation is: Check the MX route list, downstream interface addressing and forward/return reachability to a test endpoint. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.

  1. Authorized clients obtain nonoverlapping addresses and reach their designated gateway and permitted resources.
  2. The replacement is managed under the proper entitlement without leaving an unauthorized duplicate inventory entry.
  3. The remote internal subnet becomes reachable through the correct next hop without diverting unrelated traffic.
  4. The support team isolates local connectivity failure from remote management loss without inventing unsupported local configuration access.

Explanation

Correct Answer

C:

The acceptance criterion is: The remote internal subnet becomes reachable through the correct next hop without diverting unrelated traffic. Verify it using: Check the MX route list, downstream interface addressing and forward/return reachability to a test endpoint. The associated corrective action is: Add a specific supported static route through a reachable LAN-side router after verifying the downstream subnet.

Incorrect Answers

A:

That outcome is relevant to the distinct Meraki subject of MX VLAN interfaces and DHCP configuration, not the specific MX static routes to downstream layer three network requirement. For this scenario, the proper response is: Add a specific supported static route through a reachable LAN-side router after verifying the downstream subnet. Verify it through: Check the MX route list, downstream interface addressing and forward/return reachability to a test endpoint.

B:

That outcome is relevant to the distinct Meraki subject of Licensing entitlement after hardware replacement, not the specific MX static routes to downstream layer three network requirement.

D:

That outcome is relevant to the distinct Meraki subject of Local status page versus cloud Dashboard troubleshooting, not the specific MX static routes to downstream layer three network requirement.

Question 425

A Meraki operations reviewer examines this case. An engineer points a static route toward a gateway IP that is not on any reachable MX interface. Which assumption is the MOST DIRECTLY relevant unsafe or technically wrong shortcut to reject here? Select ONE best answer.

  1. Create an allow-any MX firewall rule as the only remedy for an absent static route to a warehouse VLAN.
  2. Silently enroll privately owned phones as organization-supervised devices with full wipe rights regardless of policy.
  3. Claim NetFlow provides the complete encrypted content of every HTTPS transaction.
  4. Disable all MX content filtering and intrusion prevention to fix one incorrectly categorized web site.

Explanation

Correct Answer

A:

It conflicts with the relevant behavior: Static routes require valid destinations and next hops; a firewall allow rule alone cannot repair absent routing.

Incorrect Answers

B:

That proposal is unsafe in its own context (the separate topic of Systems Manager managed enrollment versus BYOD privacy), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns MX static routes to downstream layer three network: Create an allow-any MX firewall rule as the only remedy for an absent static route to a warehouse VLAN.

C:

That proposal is unsafe in its own context (the separate topic of NetFlow export and traffic visibility limits), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns MX static routes to downstream layer three network: Create an allow-any MX firewall rule as the only remedy for an absent static route to a warehouse VLAN.

D:

That proposal is unsafe in its own context (the separate topic of MX layer three and layer seven security filtering), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns MX static routes to downstream layer three network: Create an allow-any MX firewall rule as the only remedy for an absent static route to a warehouse VLAN.

Question 426

A Cisco Meraki deployment engineer investigates this operational case: A new payment-terminal VLAN must be reachable from datacenter systems but is currently excluded from Auto VPN. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.

  1. Enable VPN participation for only authorized local subnets and verify advertised remote paths.
  2. Bind only compatible branch networks to the approved configuration template and plan site-specific overrides intentionally.
  3. Check the organization-wide co-term entitlement balance and expiration date before adding equipment with new licenses.
  4. Place 802.1X enforcement on a supported access authenticator and coordinate the resulting VLAN with MX routing policy.

Explanation

Correct Answer

A:

The targeted next step is: Enable VPN participation for only authorized local subnets and verify advertised remote paths. The technical reason is: Site-to-site VPN enrollment and subnet participation are separate configuration choices; local VLAN presence alone does not advertise it.

Incorrect Answers

B:

That action is relevant to the distinct Meraki subject of Configuration templates and network binding, not the specific MX Auto VPN participation for selected VLANs requirement.

C:

That action is relevant to the distinct Meraki subject of Co-termination licensing compliance and common expiration, not the specific MX Auto VPN participation for selected VLANs requirement.

D:

That action is relevant to the distinct Meraki subject of MX access policies and switch-side authentication boundary, not the specific MX Auto VPN participation for selected VLANs requirement.

Question 427

A peer reviewer evaluates the following Meraki case. A new payment-terminal VLAN must be reachable from datacenter systems but is currently excluded from Auto VPN. The proposed action is: Enable VPN participation for only authorized local subnets and verify advertised remote paths. Which technical principle BEST supports this decision? Select ONE best answer.

  1. Camera recording and alerts are separate functions; a notification can fail despite accessible captured video or healthy camera connectivity.
  2. L3/L7 firewall and threat inspection may block different stages of a session; port reachability does not guarantee application permission.
  3. Firmware upgrades may trigger device restart or service interruption despite redundant link designs; the change needs tested mitigation.
  4. Site-to-site VPN enrollment and subnet participation are separate configuration choices; local VLAN presence alone does not advertise it.

Explanation

Correct Answer

D:

Site-to-site VPN enrollment and subnet participation are separate configuration choices; local VLAN presence alone does not advertise it. In this situation (A new payment-terminal VLAN must be reachable from datacenter systems but is currently excluded from Auto VPN.), it justifies the action: Enable VPN participation for only authorized local subnets and verify advertised remote paths.

Incorrect Answers

A:

That principle is relevant to the distinct Meraki subject of MV smart camera video availability and alert settings, not the specific MX Auto VPN participation for selected VLANs requirement.

B:

That principle is relevant to the distinct Meraki subject of MX layer three and layer seven security filtering, not the specific MX Auto VPN participation for selected VLANs requirement.

C:

That principle is relevant to the distinct Meraki subject of MX firmware scheduled maintenance and WAN failover, not the specific MX Auto VPN participation for selected VLANs requirement.

Question 428

A Meraki support engineer must distinguish facts from assumptions. A new payment-terminal VLAN must be reachable from datacenter systems but is currently excluded from Auto VPN. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.

  1. Compare primary and secondary uplink graphs, observed ping loss and application errors across aligned timestamps.
  2. Compare configured VLAN ID, interface address, DHCP scope and one client's lease and gateway reachability.
  3. Inspect MX Site-to-site VPN settings, remote learned routes and a representative permitted inter-site connection.
  4. Inspect approved maintenance settings, stack member upgrade state and representative PoE/VLAN client recovery.

Explanation

Correct Answer

C:

The discriminating evidence is: Inspect MX Site-to-site VPN settings, remote learned routes and a representative permitted inter-site connection. Expected result: The intended branch subnet appears remotely and successfully reaches protected applications without leaking guest networks.

Incorrect Answers

A:

That evidence is relevant to the distinct Meraki subject of WAN uplink performance graphs and loss baselines, not the specific MX Auto VPN participation for selected VLANs requirement.

B:

That evidence is relevant to the distinct Meraki subject of MX VLAN interfaces and DHCP configuration, not the specific MX Auto VPN participation for selected VLANs requirement.

D:

That evidence is relevant to the distinct Meraki subject of MS firmware and switch stack sequencing, not the specific MX Auto VPN participation for selected VLANs requirement.

Question 429

An implementation lead needs a measurable acceptance criterion for a Meraki change. A new payment-terminal VLAN must be reachable from datacenter systems but is currently excluded from Auto VPN. The proposed validation is: Inspect MX Site-to-site VPN settings, remote learned routes and a representative permitted inter-site connection. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.

  1. The intended branch subnet appears remotely and successfully reaches protected applications without leaking guest networks.
  2. The client population maintains acceptable airtime and roaming behavior under a representative load.
  3. Authenticated endpoints receive the correct VLAN and only required upstream access.
  4. Approved clients authenticate to their policy VLAN; unknown devices follow documented restriction or fallback.

Explanation

Correct Answer

A:

The acceptance criterion is: The intended branch subnet appears remotely and successfully reaches protected applications without leaking guest networks. Verify it using: Inspect MX Site-to-site VPN settings, remote learned routes and a representative permitted inter-site connection. The associated corrective action is: Enable VPN participation for only authorized local subnets and verify advertised remote paths.

Incorrect Answers

B:

That outcome is relevant to the distinct Meraki subject of High-density RF channel and AP count planning, not the specific MX Auto VPN participation for selected VLANs requirement.

C:

That outcome is relevant to the distinct Meraki subject of MX access policies and switch-side authentication boundary, not the specific MX Auto VPN participation for selected VLANs requirement.

D:

That outcome is relevant to the distinct Meraki subject of MS 802.1X access control and RADIUS, not the specific MX Auto VPN participation for selected VLANs requirement.

Question 430

A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. A new payment-terminal VLAN must be reachable from datacenter systems but is currently excluded from Auto VPN. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.

  1. Enable VPN participation for only authorized local subnets and verify advertised remote paths.
  2. Verify MV camera power, network and configured alert rules before treating a missing motion notification as lost video.
  3. Apply guest SSID access, splash and LAN-isolation settings that preserve required DHCP, DNS and permitted Internet services.
  4. Inspect MX Site-to-site VPN settings, remote learned routes and a representative permitted inter-site connection.
  5. Enroll supported corporate endpoints with an appropriate ownership mode and assign compliant security profiles.

Explanation

Correct Answers

A:

The targeted next step is: Enable VPN participation for only authorized local subnets and verify advertised remote paths. The technical reason is: Site-to-site VPN enrollment and subnet participation are separate configuration choices; local VLAN presence alone does not advertise it. A successful verification would use: Inspect MX Site-to-site VPN settings, remote learned routes and a representative permitted inter-site connection.

D:

The discriminating evidence is: Inspect MX Site-to-site VPN settings, remote learned routes and a representative permitted inter-site connection.

Incorrect Answers

B:

That action is relevant to the distinct Meraki subject of MV smart camera video availability and alert settings, not the specific MX Auto VPN participation for selected VLANs requirement. For this scenario, the proper response is: Enable VPN participation for only authorized local subnets and verify advertised remote paths.

C:

That action is relevant to the distinct Meraki subject of MR guest SSID splash and isolation settings, not the specific MX Auto VPN participation for selected VLANs requirement.

E:

That action is relevant to the distinct Meraki subject of Systems Manager MDM enrollment and compliance profiles, not the specific MX Auto VPN participation for selected VLANs requirement.

Cisco Meraki Solutions Specialist (500-220) Practice Tests